Axiovert 5 Digital w/mono camera

Microscope Axiovert 5 digital; integrated mono camera Complete stand equipment Axiovert 5 digital with integrated mono camera; suitable for transmitted light brightfield, phase contrast Ph1 and fluorescence RGB-UV. Eyepiece-less technology - prepared for tablet and Wi-Fi use. - tablet holder for Apple® iPad Pro® 4th/5th generation 12.9" or Microsoft Surface Pro 7 (CPU: i5 or above, RAM: 8 GB or above) 12.3", Microsoft Surface Pro 8 (CPU: i5 or above, RAM: 8 GB or above) 13.0", height and angle adjustable - 6-position nosepiece B M27, encoded - 6-position reflector turret, encoded for P<(>&<)>C modules - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - snap button for integrated camera - Carrier transmitted-light illumination with white LED 10W (average LED lifetime > 60000 hrs) and phosphorescence block filter - Light shield to block ambient light - Specimen stage 232x230 with hardcoat anodized surface - Object guide M 130x85 R/L - Mounting frame Flex M and inserts for: microwell plates, flasks and petri dishes d=95 mm; petridishes d=88 mm, 65 mm, 54 mm, 36 mm; object slides 76x26 mm and chambers (ibidi® µ-Slide®, Nunc® Lab-Tek® / Lab-Tek II) - integrated Illumination System RGB-UV, equipped with 4 solid state LEDs (average LED lifetime depending on wavelength): - Red (625 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes (> 60000 hrs) - Green (565 nm) for excitation of Cy3, TRITC, DsRed and similar dyes (> 60000 hrs) - Blue (470 nm) for excitation of eGFP, Fluo4, FITC and similardyes (> 60000hrs) - UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes (> 40000 hrs) - Filter set 90 HE LED with Reflector module FL EC P<(>&<)>C - LD condenser 0.4 with contrast slider for brightfield and phase contrast Ph1 - Objective LD A-Plan 5x/0.15 Ph1 M27 - Objective LD A-Plan 10x/0.25 Ph1 M27 - Objective LD A-Plan 20x/0.35 Ph1 M27 - Objective LD A-Plan 40x/0.55 Ph1 M27 - integrated Microscopy Mono Camera: - number of pixels: 2464 (H) x 2056 (V) = 5.07 mega pixel - sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS - pixelsize: 3.45 μm x 3.45 μm - chip size: 8.5 mm x 7.1 mm, equivalent to 2/3'' (diagonal 11.1 mm) - spectral range: app. 350 nm to 1000 nm - full well capacity: approx. 10500e - live frame rate: 25 frames/s @ 1920x1080 pixels - readout of sensor sub-regions (''ROI'') - adjustable digitization: 8 and 12 Bit / Pixel - cooling: temperature stable @ 25°C for ambient temperatures between 18°C and 30°C - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - USB 3.0 Type C data and 60W fast charging cable for Apple iPad Pro® or Microsoft Surface Pro - for usage with Labscope for Windows / iOS - USB 3.0 flash drive, Type-C and Type-A - Dust protection set Apple® and iPad Pro® are registered trademarks of Apple Inc. Microsoft and Microsoft Surface are trademarks of the Microsoft group ibidi® and μ-Slide® are registered trademarks of the ibidi GmbH Nunc® and Lab-Tek® are registered trademarks of Nunc, Inc

Labscope for iOS / Android (O) Labscope for iOS / Android is a microscope software used to control, image acquisition, image processing and image analysis. Typical application fields of the software are general tasks and applications in microscopy or image acquisition, among others for education, routine and research. The software is not intended to directly or indirectly produce medical diagnostic results. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Labscope 4.2 for Windows (O) Labscope for Windows is a software used to control and acquire images through connected and compatible microscopes. This combined system is used for in-vitro examination of images to obtain information about physiological orpathological processes or conditions. Labscope for Windows is intended for the use of professional users, among others in the field of life science, cytology and pathology. The connected microscopes are themselves CE-IVD products. For IVD examinations, ensure that the displayed image on the monitor shows the equivalent information as visible through the eyepieces of the microscope. Labscope AI modules "AI Cell Confluency" and "AI Cell Counting" are not intended for IVD examinations and may only beused in research. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Labscope Module Multi Channel DLic The Labscope module Multi Channel Fluorescence (MCF) provides an easy solution for acquisition of fluorescence and transmitted light images in independent channels. - acquisition of up to 4 fluorescence channels + 1transmitted light channel - smart fluorescence channel overwrite - easy fluorescence channels setup with manual microscopes - compatibility with Smart Microscopy - multichannel view including image processing - report generation with MCF images