Carl Zeiss India (Bangalore) Pvt. Ltd. - Inverted microscopes - Axiovert 5/7

Axiovert 7

Variants Axiovert 7 You can customize this list by removing one or more columns. Show all variants (5) Show all Hide all	Axiovert 7 RL f/BF Item no.: 491239-0018-000	Inverted microscope Axiovert 7 TL FL for Life Sciences Item no.: 491237-0039-000	Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000	Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000	Inverted microscope Axiovert 7 TL FL motorized system Item no.: 491237-0038-000

Variants Axiovert 7 You can customize this list by removing one or more columns. Show all variants (5) Show all Hide all	example picture Axiovert 7 RL f/BF Item no.: 491239-0018-000 Axiovert 7 RL f/BF Item no.: 491239-0018-000 Inverted microscope Axiovert 7 RL for reflected-light brightfield with objectives EC Epiplan and Axiocam 305 color Inverted microscope Axiovert 7 RL for reflected-light bright...	example picture Inverted microscope Axiovert 7 TL FL for Life Sciences Item no.: 491237-0039-000 Inverted microscope Axiovert 7 TL FL for Life Sciences Item no.: 491237-0039-000 Inverted microscope Axiovert 7 TL FL for Life Sciences combines maximum performance with a minimal footprint and seamlessly fits into any laboratory environment. Designed to support both routine imaging and advanced multidimensional fluorescence applications, it delivers publication-ready quality while enabling automated, efficient workflow Inverted microscope Axiovert 7 TL FL for Life Sciences combi...	example picture Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000 Axiovert 7 RL f/BF DF C-CIC POL Item no.: 491239-0019-000 Inverted microscope Axiovert 7 RL for reflected-light brightfield, darkfield, circular DIC and polarization, with objectives EC Epiplan-Neofluar and Axiocam 305 color Inverted microscope Axiovert 7 RL for reflected-light bright...	example picture Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000 Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Item no.: 491239-0020-000 Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI) Non-metallic inclusion analysis (NMI) is a standard based application with technical minimum requirements regarding the microscope, digital camera and PC hardware. Modifications are only possible after consultation with the support. Including bright field, objectives EC Epiplan 5x/10x, camera, joystick, stand, scanning stage, workstation, monitor, ZEN core and modules for NMI. Microscope Axiovert 7 complete system for Non-Metallic-Inclu...	example picture Inverted microscope Axiovert 7 TL FL motorized system Item no.: 491237-0038-000 Inverted microscope Axiovert 7 TL FL motorized system Item no.: 491237-0038-000 Inverted microscope Axiovert 7 TL FL motorized system is built around a fully motorized Z-drive, combined with the trusted scanning stage, making it a true time saver for modern laboratories. It supports automated workflows, motorized sample handling, smart microscopy concepts, and AI-powered analysis. Operation within ZEN core is recommended to unlock its full capabilities. Inverted microscope Axiovert 7 TL FL motorized system is bui...
Microscope stands inverted	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BD with white LED 10W (average LED lifetime > 60000 hrs), slider mounts für luminous-field diaphragm, aperture stop, polarizer- and filter slider - motorized focus drive (resolution 78 nm) - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Ergo intermediate piece H=50 mm for optimization of viewing height Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000 Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000	Microscope stands inverted Microscope stand Axiovert 7 TL FL with motorized z-drive Microscope stand Axiovert 7 TL FL with motorized z-drive Item no.: 431030-9230-000 Microscope stand Axiovert 7 TL FL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P&C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination with interface for Viluma 5/7 / Colibri 3 / HBO / HXP / X-Cite Xylis II®, slider mounts for luminous field diaphragm, aperture stop, polarizer and filter slider - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm with phosphorescence block filter - motorized focus drive (resolution 78 nm) - 13 mm focus lift with adjustable focus stop - TL/RL switching - snap button for ZEISS Axiocam - ECO mode - Lightmanager for TL LED and Colibri 3 - CAN port for Colibri 3 - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9230-000 Slider with Mirror 100% for Intermediate Phototube Slider with Mirror 100% for Intermediate Phototube Item no.: 425146-9051-000 Slider with Mirror 100% for Intermediate Phototube - 2 clickstop positions for 100vis/100doc Item no.: 425146-9051-000 Intermediate phototube H=50mm, left port Intermediate phototube H=50mm, left port Item no.: 425146-9031-000 Intermediate phototube H=50mm, left port - Camera port with interface 60N - Slider mount with 2 clickstop positions Additionally required: - Slider with mirror 100% - Slider with beam splitter 50% - Slider with beam splitter 20/80% Item no.: 425146-9031-000	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BD with white LED 10W (average LED lifetime > 60000 hrs), slider mounts für luminous-field diaphragm, aperture stop, polarizer- and filter slider - motorized focus drive (resolution 78 nm) - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Ergo intermediate piece H=50 mm for optimization of viewing height Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000 Ergo intermediate piece H=50 mm for optimization of viewing height Item no.: 425146-9040-000	Microscope stands inverted Microscope stand Axiovert 7 RL Microscope stand Axiovert 7 RL Item no.: 431030-9080-000 Microscope stand Axiovert 7 RL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BD with white LED 10W (average LED lifetime > 60000 hrs), slider mounts für luminous-field diaphragm, aperture stop, polarizer- and filter slider - motorized focus drive (resolution 78 nm) - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9080-000 Intermediate phototube H=50mm, left port Intermediate phototube H=50mm, left port Item no.: 425146-9031-000 Intermediate phototube H=50mm, left port - Camera port with interface 60N - Slider mount with 2 clickstop positions Additionally required: - Slider with mirror 100% - Slider with beam splitter 50% - Slider with beam splitter 20/80% Item no.: 425146-9031-000 Slider with Mirror 100% for Intermediate Phototube Slider with Mirror 100% for Intermediate Phototube Item no.: 425146-9051-000 Slider with Mirror 100% for Intermediate Phototube - 2 clickstop positions for 100vis/100doc Item no.: 425146-9051-000	Microscope stands inverted Microscope stand Axiovert 7 TL FL with motorized z-drive Microscope stand Axiovert 7 TL FL with motorized z-drive Item no.: 431030-9230-000 Microscope stand Axiovert 7 TL FL with motorized z-drive - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P&C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination with interface for Viluma 5/7 / Colibri 3 / HBO / HXP / X-Cite Xylis II®, slider mounts for luminous field diaphragm, aperture stop, polarizer and filter slider - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm with phosphorescence block filter - motorized focus drive (resolution 78 nm) - 13 mm focus lift with adjustable focus stop - TL/RL switching - snap button for ZEISS Axiocam - ECO mode - Lightmanager for TL LED and Colibri 3 - CAN port for Colibri 3 - Parfocality manager - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set Item no.: 431030-9230-000 Intermediate phototube H=50mm, left port Intermediate phototube H=50mm, left port Item no.: 425146-9031-000 Intermediate phototube H=50mm, left port - Camera port with interface 60N - Slider mount with 2 clickstop positions Additionally required: - Slider with mirror 100% - Slider with beam splitter 50% - Slider with beam splitter 20/80% Item no.: 425146-9031-000 Slider with Mirror 100% for Intermediate Phototube Slider with Mirror 100% for Intermediate Phototube Item no.: 425146-9051-000 Slider with Mirror 100% for Intermediate Phototube - 2 clickstop positions for 100vis/100doc Item no.: 425146-9051-000
Stand accessories	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000	Stand accessories	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000	Stand accessories Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm Item no.: 423730-9080-000 Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function Item no.: 423730-9080-000	Stand accessories
Reflected-light illumination	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module polarizer ACR P&C for reflected light Reflector module polarizer ACR P&C for reflected light Item no.: 424923-9901-000 Reflector module polarizer ACR P&C for reflected light Item no.: 424923-9901-000 Reflector module C-DIC/TIC ACR P&C for reflected light Reflector module C-DIC/TIC ACR P&C for reflected light Item no.: 424941-9000-000 Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization Item no.: 424941-9000-000 Reflector module dark field ACR P&C for reflected light Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module dark field ACR P&C for reflected light Item no.: 424922-9901-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Stop slider A 14x40 mm with aperture diaphragm for Axio Vert Item no.: 423655-9020-000 Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1 Item no.: 423655-9020-000 Reflector module bright field ACR P&C for reflected light Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Reflector module bright field ACR P&C for reflected light Item no.: 424928-9901-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000	Reflected-light illumination Stop slider A 14x40 mm with aperture/luminous field diaphragm Stop slider A 14x40 mm with aperture/luminous field diaphragm Item no.: 423730-9151-000 Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1 Item no.: 423730-9151-000 Illumination adapter A, achromatic, for Axio Vert Illumination adapter A, achromatic, for Axio Vert Item no.: 423655-9050-000 llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths Item no.: 423655-9050-000
Lamp power supply cable	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000	Lamp power supply cable	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000	Lamp power supply cable Converter CAN - USB Rev.2 (D) Converter CAN - USB Rev.2 (D) Item no.: 432909-9901-000 Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable Item no.: 432909-9901-000
Stages and accessories	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame K; low profile, for reflected light, d=72 mm Mounting frame K; low profile, for reflected light, d=72 mm Item no.: 432334-9001-000 Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm Item no.: 432334-9001-000 Stage insert, metal; D=72 mm, d=10 mm Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=23 mm Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000	Stages and accessories Universal mounting frame K Universal mounting frame K Item no.: 451352-0000-000 Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm Item no.: 451352-0000-000 Universal mounting frame K-X Universal mounting frame K-X Item no.: 451353-0000-000 Universal mounting frame K-X for: - multitest dishes with footprint 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm frame size 160 x 110 mm Item no.: 451353-0000-000 Mechanical stage 130x85 R/L for Axiovert Mechanical stage 130x85 R/L for Axiovert Item no.: 432043-9000-000 Mechanical stage 130x85 R/L for Axiovert - for Axiovert 5 and Axio Vert.A1 - manual 3-plate mechanical stage - for mounting frames K 160 x 110 mm - max. 3 kg sample load Item no.: 432043-9000-000	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame K; low profile, for reflected light, d=72 mm Mounting frame K; low profile, for reflected light, d=72 mm Item no.: 432334-9001-000 Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm Item no.: 432334-9001-000 Stage insert, metal; D=72 mm, d=23 mm Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=23 mm Item no.: 451328-9000-000 Stage insert, metal; D=72 mm, d=10 mm Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000 Stage insert, metal; D=72 mm, d=10 mm Item no.: 451326-9901-000	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Mounting frame for steel specimen (D) Mounting frame for steel specimen (D) Item no.: 432322-9000-000 Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm Item no.: 432322-9000-000 Universal mounting frame K Universal mounting frame K Item no.: 451352-0000-000 Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm Item no.: 451352-0000-000	Stages and accessories Scanning Stage 130x85 mot P; CAN (D) Scanning Stage 130x85 mot P; CAN (D) Item no.: 432031-9902-000 Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO Item no.: 432031-9902-000 Universal mounting frame K Universal mounting frame K Item no.: 451352-0000-000 Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm Item no.: 451352-0000-000 Universal mounting frame K-X Universal mounting frame K-X Item no.: 451353-0000-000 Universal mounting frame K-X for: - multitest dishes with footprint 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm frame size 160 x 110 mm Item no.: 451353-0000-000
Tubes and accessories	Tubes and accessories Binocular phototube, left port 45°/23 (50:50) Binocular phototube, left port 45°/23 (50:50) Item no.: 425523-9020-000 Binocular phototube, left port 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N Item no.: 425523-9020-000	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425523-9000-000 Binocular tube 45°/23 - upright and unreversed image Item no.: 425523-9000-000	Tubes and accessories Binocular phototube, left port 45°/23 (50:50) Binocular phototube, left port 45°/23 (50:50) Item no.: 425523-9020-000 Binocular phototube, left port 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N Item no.: 425523-9020-000	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425523-9000-000 Binocular tube 45°/23 - upright and unreversed image Item no.: 425523-9000-000	Tubes and accessories Binocular tube 45°/23 Binocular tube 45°/23 Item no.: 425523-9000-000 Binocular tube 45°/23 - upright and unreversed image Item no.: 425523-9000-000
Filters	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000	Filters Conversion filter 5700-3200 K, d=32 mm Conversion filter 5700-3200 K, d=32 mm Item no.: 427809-9000-000 Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9000-000 Neutral-density filter 0.06, d=32x2 Neutral-density filter 0.06, d=32x2 Item no.: 467848-0000-000 Neutral-density filter 0.06, d=32x2 Item no.: 467848-0000-000 Filter Set 43 HE with Reflector Module FL EC P&C (E) Filter Set 43 HE with Reflector Module FL EC P&C (E) Item no.: 489043-9901-400 Filter Set 43 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 43 HE shift free consisting of filters EX BP 550/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources. Item no.: 489043-9901-400 Filter Set 90 HE LED with Reflector Module FL EC P&C (E) Filter Set 90 HE LED with Reflector Module FL EC P&C (E) Item no.: 489090-9110-400 Filter Set 90 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 555 and 630 nm. Consisting of filters QBS 405 + 493 + 575 + 653 and QBP 425/30 + 514/30 + 592/25 + 709/100 inserted in reflector module, reflection avoided through tilted mount for emission filters. Item no.: 489090-9110-400 Filter Set 38 HE with Reflector Module FL EC P&C (E) Filter Set 38 HE with Reflector Module FL EC P&C (E) Item no.: 489038-9901-400 Filter Set 38 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 38 HE shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources. Item no.: 489038-9901-400	Filters Conversion filter 5700-3200 K, d=25 mm Conversion filter 5700-3200 K, d=25 mm Item no.: 427809-9010-000 Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light Item no.: 427809-9010-000 Grey filter 0.25, d=25x2 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.25, d=25x2 Item no.: 447836-0000-000 Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000	Filters Grey filter 0.06, d=25x2 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000 Grey filter 0.06, d=25x2 Item no.: 447835-0000-000	Filters Neutral-density filter 0.06, d=32x2 Neutral-density filter 0.06, d=32x2 Item no.: 467848-0000-000 Neutral-density filter 0.06, d=32x2 Item no.: 467848-0000-000 Neutral-density filter 0.05 for condenser Neutral-density filter 0.05 for condenser Item no.: 424228-9060-000 Neutral-density filter 0.05 for condenser - for the use at transmitted-light brightfield with alternating Ph, PlasDIC, iHMC - to be inserted into free position of LD condensers with modulator disk Item no.: 424228-9060-000 Filter Set 90 HE LED with Reflector Module FL EC P&C (E) Filter Set 90 HE LED with Reflector Module FL EC P&C (E) Item no.: 489090-9110-400 Filter Set 90 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE LED shift free for use with ZEISS LED fluorescence light sources with excitation wavelengths 385, 475, 555 and 630 nm. Consisting of filters QBS 405 + 493 + 575 + 653 and QBP 425/30 + 514/30 + 592/25 + 709/100 inserted in reflector module, reflection avoided through tilted mount for emission filters. Item no.: 489090-9110-400 Filter Set 38 HE with Reflector Module FL EC P&C (E) Filter Set 38 HE with Reflector Module FL EC P&C (E) Item no.: 489038-9901-400 Filter Set 38 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 38 HE shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources. Item no.: 489038-9901-400 Filter Set 43 HE with Reflector Module FL EC P&C (E) Filter Set 43 HE with Reflector Module FL EC P&C (E) Item no.: 489043-9901-400 Filter Set 43 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 43 HE shift free consisting of filters EX BP 550/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters. Recommended for white light fluorescence light sources or ZEISS LED fluorescence light sources. Item no.: 489043-9901-400 Green filter, d=32x2 mm Green filter, d=32x2 mm Item no.: 000000-1374-896 Green filter, d=32x2 mm for contrast enhancement for phase contrast and b/w image recording Item no.: 000000-1374-896
Video devices	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000	Video devices Camera Adapter 60N-C 2/3" 0.63x Camera Adapter 60N-C 2/3" 0.63x Item no.: 426113-0000-000 Camera Adapter 60N-C 2/3" 0.63x Item no.: 426113-0000-000	Video devices Camera Adapter 60N-C 2/3" 0.5x Camera Adapter 60N-C 2/3" 0.5x Item no.: 426112-0000-000 Camera Adapter 60N-C 2/3" 0.5x Item no.: 426112-0000-000	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000	Video devices Camera Adapter 60N-C 2/3" 0.63x Camera Adapter 60N-C 2/3" 0.63x Item no.: 426113-0000-000 Camera Adapter 60N-C 2/3" 0.63x Item no.: 426113-0000-000
Measuring and counting components	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000	Measuring and counting components	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000	Measuring and counting components Stage micrometer for reflected light 5 + 100/100y d=0mm Stage micrometer for reflected light 5 + 100/100y d=0mm Item no.: 474027-0000-000 Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction Item no.: 474027-0000-000	Measuring and counting components
Eyepieces	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000
Eyepiece accessories	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000
Reflected-light objectives	Reflected-light objectives Objective EC Epiplan 5x/0.13 M27 Objective EC Epiplan 5x/0.13 M27 Item no.: 422030-9902-000 Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm) Item no.: 422030-9902-000 Objective EC Epiplan 10x/0.25 M27 Objective EC Epiplan 10x/0.25 M27 Item no.: 422040-9902-000 Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm) Item no.: 422040-9902-000 Objective EC Epiplan 20x/0.4 M27 Objective EC Epiplan 20x/0.4 M27 Item no.: 422050-9903-000 Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm) Item no.: 422050-9903-000 Objective EC Epiplan 50x/0.75 M27 Objective EC Epiplan 50x/0.75 M27 Item no.: 422070-9902-000 Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm) Item no.: 422070-9902-000	Reflected-light objectives	Reflected-light objectives Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 Item no.: 422320-9960-000 Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm) Item no.: 422320-9960-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm) Item no.: 422392-9961-000 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm) Item no.: 422372-9961-000 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm) Item no.: 000000-1156-524 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm) Item no.: 422342-9960-000 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 Item no.: 000000-1156-514 Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm) Item no.: 000000-1156-514	Reflected-light objectives Objective EC Epiplan 10x/0.25 M27 Objective EC Epiplan 10x/0.25 M27 Item no.: 422040-9902-000 Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm) Item no.: 422040-9902-000 Objective EC Epiplan 5x/0.13 M27 Objective EC Epiplan 5x/0.13 M27 Item no.: 422030-9902-000 Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm) Item no.: 422030-9902-000	Reflected-light objectives
Control devices	Control devices Joystick XY; CAN Joystick XY; CAN Item no.: 432903-9012-000 Joystick XY; CAN for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9012-000	Control devices	Control devices Joystick XY; CAN Joystick XY; CAN Item no.: 432903-9012-000 Joystick XY; CAN for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9012-000	Control devices Joystick XY; CAN Joystick XY; CAN Item no.: 432903-9012-000 Joystick XY; CAN for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9012-000	Control devices Joystick XY; CAN Joystick XY; CAN Item no.: 432903-9012-000 Joystick XY; CAN for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009 Item no.: 432903-9012-000
Image processing	Image processing Microscopy Camera Axiocam 305 color (D) Microscopy Camera Axiocam 305 color (D) Item no.: 426560-9030-000 Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diag. 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: - H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 - H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): - H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) - H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 / Windows 11 for Labscope: Windows 10 / Windows 11 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9030-000	Image processing Microscopy Camera Axiocam 305 mono (D) Microscopy Camera Axiocam 305 mono (D) Item no.: 426560-9040-000 Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800: 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface, Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9040-000	Image processing Microscopy Camera Axiocam 305 color (D) Microscopy Camera Axiocam 305 color (D) Item no.: 426560-9030-000 Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 #m x 3.45 #m Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diag. 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: - H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 - H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): - H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) - H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: < 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 / Windows 11 for Labscope: Windows 10 / Windows 11 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9030-000	Image processing Microscopy Camera Axiocam 705 color R2 (D) Microscopy Camera Axiocam 705 color R2 (D) Item no.: 426560-9051-000 Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 / Windows 11 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9051-000 Microscopy Workstation Compact HP Z2 G1i Microscopy Workstation Compact HP Z2 G1i Item no.: 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i HP Z2 Tower G1i Workstation - Chipset: Intel W880 - Memory Expansion Slots: 4 x DDR5-RAM modules, 5600 MHz - Memory: max. 192 GB RAM (at launch) / 256 GB RAM (later) - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 4 x4 (x16 connector) 1x PCI Express Generation 4 x4 1x PCI Express Generation 4 x1 (x4 connector) - Graphics card onboard: Intel Graphics, 2 x Display Port 2.1 (max. 3840 x 2160 Pixel) - SSD: 1 x 1 TB M.2 NVMe - Hard disks: 1 x 12 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-C SuperSpeed USB 20 Gbps (front) 3 x Type-A Hi-Speed USB 480 Mbps, 2 x Type-ASuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM: BIOS selectable, default off - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 388 x 175 x 426 mm - USB Mouse, Rescue Kit Item no.: 410201-9915-000 System Configuration 1b for HP Z2 G1i System Configuration 1b for HP Z2 G1i Item no.: 000000-2785-402 System Configuration 1b for HP Z2 G1i Installation of Windows 11 IoT Enterprise LTSC 2024 x64 incl. Windows 11 License - without ZEN Software Installation - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 000000-2785-402 Processor Intel Core Ultra 7 265K (HP Z2 G1i) Processor Intel Core Ultra 7 265K (HP Z2 G1i) Item no.: 410220-0700-000 Processor Intel Core Ultra 7 265K (HP Z2 G1i) High performance processor configuration - Intel Core Ultra 7 265K (8 Performance-cores, 12 Efficient-cores, Performance-core base frequency 3.9 GHz, cache 30 MB) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 410220-0700-000 Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) Item no.: 410201-3200-000 Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) consisting of 1 x 32 GB modules - DDR5 5600 MHz nonECC unbuffered DIMM - can be extended to 64 GB (2 x 410201-3200-000) or 128 GB (4 x 410201-3200-000) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 410201-3200-000 Graphics Card NVIDIA RTX PRO 4000 24 GB Graphics Card NVIDIA RTX PRO 4000 24 GB Item no.: 410331-3400-000 Graphics Card NVIDIA RTX PRO 4000 24 GB Professional graphics card for Microscopy Workstation - 24 GB GDDR7 memory - PCI Express 5.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.6 and CUDA 12.8 - Support for up to four displays - Display outputs: 4 x DisplayPort 2.1b (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel) Item no.: 410331-3400-000 Language Pack English US (O) Language Pack English US (O) Item no.: 410380-0200-000 Language Pack English US (O) - Keyboard with English (US) layout Item no.: 410380-0200-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Item no.: 410350-2408-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable Item no.: 410350-2408-000	Image processing Microscopy Camera Axiocam 305 mono (D) Microscopy Camera Axiocam 305 mono (D) Item no.: 426560-9040-000 Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800: 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface, Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9040-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Item no.: 410350-2408-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable Item no.: 410350-2408-000 Language Pack English US (O) Language Pack English US (O) Item no.: 410380-0200-000 Language Pack English US (O) - Keyboard with English (US) layout Item no.: 410380-0200-000 Hard disk 12 TB 7200 RPM SATA, additional Hard disk 12 TB 7200 RPM SATA, additional Item no.: 410323-0012-000 Hard disk 12 TB 7200 RPM SATA, additional - maximum count per workstation: 1 Item no.: 410323-0012-000 Graphics Card NVIDIA RTX PRO 4000 24 GB Graphics Card NVIDIA RTX PRO 4000 24 GB Item no.: 410331-3400-000 Graphics Card NVIDIA RTX PRO 4000 24 GB Professional graphics card for Microscopy Workstation - 24 GB GDDR7 memory - PCI Express 5.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.6 and CUDA 12.8 - Support for up to four displays - Display outputs: 4 x DisplayPort 2.1b (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel) Item no.: 410331-3400-000 Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) Item no.: 410201-3200-000 Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) consisting of 1 x 32 GB modules - DDR5 5600 MHz nonECC unbuffered DIMM - can be extended to 64 GB (2 x 410201-3200-000) or 128 GB (4 x 410201-3200-000) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 410201-3200-000 Processor Intel Core Ultra 7 265K (HP Z2 G1i) Processor Intel Core Ultra 7 265K (HP Z2 G1i) Item no.: 410220-0700-000 Processor Intel Core Ultra 7 265K (HP Z2 G1i) High performance processor configuration - Intel Core Ultra 7 265K (8 Performance-cores, 12 Efficient-cores, Performance-core base frequency 3.9 GHz, cache 30 MB) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 410220-0700-000 System Configuration 1b for HP Z2 G1i System Configuration 1b for HP Z2 G1i Item no.: 000000-2785-402 System Configuration 1b for HP Z2 G1i Installation of Windows 11 IoT Enterprise LTSC 2024 x64 incl. Windows 11 License - without ZEN Software Installation - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i Item no.: 000000-2785-402 Microscopy Workstation Compact HP Z2 G1i Microscopy Workstation Compact HP Z2 G1i Item no.: 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i HP Z2 Tower G1i Workstation - Chipset: Intel W880 - Memory Expansion Slots: 4 x DDR5-RAM modules, 5600 MHz - Memory: max. 192 GB RAM (at launch) / 256 GB RAM (later) - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 4 x4 (x16 connector) 1x PCI Express Generation 4 x4 1x PCI Express Generation 4 x1 (x4 connector) - Graphics card onboard: Intel Graphics, 2 x Display Port 2.1 (max. 3840 x 2160 Pixel) - SSD: 1 x 1 TB M.2 NVMe - Hard disks: 1 x 12 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-C SuperSpeed USB 20 Gbps (front) 3 x Type-A Hi-Speed USB 480 Mbps, 2 x Type-ASuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM: BIOS selectable, default off - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 388 x 175 x 426 mm - USB Mouse, Rescue Kit Item no.: 410201-9915-000
Software for image processing	Software for image processing ZEN core 3.13 ZEN core 3.13 Item no.: 410135-0011-313 ZEN core 3.13 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the ZEN Data Storage image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData Export capabilities. Supported Operating System: Windows 11 Item no.: 410135-0011-313	Software for image processing ZEN 3.14+ ZEN 3.14+ Item no.: 410135-0002-314 ZEN 3.14+ Software platform for image acquisition and processing on Windows 11 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Basic acquisition functions (time series and multichannel) - ZEN API Gateway The license entitles to use the ZEN software in the specified version AD in the next ZEN version. Includes a Docker Desktop license required by selected ZEN toolkits. Item no.: 410135-0002-314 ZEN Toolkit Motorized Focus Acquisition 3.14+ ZEN Toolkit Motorized Focus Acquisition 3.14+ Item no.: 410136-0173-314 ZEN Toolkit Motorized Focus Acquisition 3.14+ This toolkit allows to acquire a z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image The license entitles to use the ZEN software in the specified version AND in the next ZEN version. Item no.: 410136-0173-314 ZEN Toolkit Deconvolution ZEN Toolkit Deconvolution Item no.: 410136-0173-370 ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode. Item no.: 410136-0173-370	Software for image processing ZEN core 3.13 ZEN core 3.13 Item no.: 410135-0011-313 ZEN core 3.13 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the ZEN Data Storage image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData Export capabilities. Supported Operating System: Windows 11 Item no.: 410135-0011-313	Software for image processing ZEN core 3.14+ ZEN core 3.14+ Item no.: 410135-0011-314 ZEN core 3.14+ Software suite for microscope image acquisition, processing, analysis and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the arivis Hub DMS image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData export capabilities. Supported Operating System: Windows 11 The license entitles to use the ZEN core software in the specified version AND in the next ZEN core version. Item no.: 410135-0011-314 ZEN Toolkit Motorized Acquisition 3.14+ ZEN Toolkit Motorized Acquisition 3.14+ Item no.: 410136-0165-314 ZEN Toolkit Motorized Acquisition 3.14+ Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. Z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles & Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image The license entitles to use the ZEN software in the specified version AND in the next ZEN version. Item no.: 410136-0165-314 ZEN Module Non-Metallic Inclusion Analysis ZEN Module Non-Metallic Inclusion Analysis Item no.: 410136-0106-360 ZEN Module Non-Metallic Inclusion Analysis Software Module for evaluation and rating of non-metallic inclusions in steel (Oxides, Sulfides and Nitrides). The following standards are supported: ASTM E45a, ISO 4967, JIS G0555, GB/T 10561, EN 10247, SEP 1571 and DIN 50602. The scope of delivery includes preconfigured and automated workflows for steel cleanliness analysis and -rating. The provided job templates are available for the user roles Supervisor and Operator and cover image acquisition, result presentation in interactive views for fast inspection and revision of inclusions, single reports with results of characteristic values and standard specific methods per mounted specimen. Furthermore, an overview report with the summary of the characteristic values, statistics and method results per standard for a set of evaluated specimens. Automated storage of generated results and inspection views in the data archive. Archived data can be re-opened and viewed. Optimized workflows for mounted specimen with/without nitride inclusions. The workflows can be conducted with acquired or loaded images. - Adjustable image acquisition settings for microscope and camera for the supervisor. Selectable image acquisition settings for the operator - Standard-measuring-field-based definition of the tiles acquisition area - Standard Template Editor to customize existing standards by copy and edit. Adjustable parameter: minimum particle and inclusion size; particle distance (in direction/perpendicular to main deformation orientation; size ratio for differentiation of globular and elongated inclusions. - Automated parallel analysis of all selected standards - Efficient auto segmentation for oxide, sulfide and nitride detection - Region adaption algorithm for optimized detection of mixed type Oxide/sulfide inclusions (complex, heterogenous inclusions) - Artifact filter for automated filtering of scratches - Advanced artifact filter for automated filtering of sulfide halos - Automated detection of the main deformation orientation (horizontal, vertical) - Standard specific severity rating filter: automated exclusion of inclusions per defined size class - Global result view with inclusion gallery for inspection and revision of objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options and result statistics. Standard results selectable by one mouse click. - Field based result view with acquired specimen image, a grid of standard-measuring-fields, specimen navigation for live inspection and revision of detected objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options per standard specific inclusion types and result statistics with field rating. Interactive selection of multiple objects for artifact classification. - Field based result view with True Worst Field detection: identification of inclusion type specific worst fields that are completely independent of the grid fields. - Standard results selectable by one mouse click. - Joint result table with characteristic core values of all selected standards. - Reports in Microsoft Word (from Microsoft Word 2013) and export as PDF. Automated generation of reports and summary reports for all standards. - Excel export of result tables - Customer database in Excel table format for input forms. Item no.: 410136-0106-360	Software for image processing ZEN core 3.13 ZEN core 3.13 Item no.: 410135-0011-313 ZEN core 3.13 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the ZEN Data Storage image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData Export capabilities. Supported Operating System: Windows 11 Item no.: 410135-0011-313 ZEN Toolkit Motorized Acquisition ZEN Toolkit Motorized Acquisition Item no.: 410136-0165-313 ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. Z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image Item no.: 410136-0165-313 ZEN Toolkit Deconvolution ZEN Toolkit Deconvolution Item no.: 410136-0173-370 ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode. Item no.: 410136-0173-370
Microscope stands upright	Microscope stands upright	Microscope stands upright Fine drive knob with scala, changeable Fine drive knob with scala, changeable Item no.: 430051-9000-000 Fine drive knob with scale, changeable for Axio Imager 2, Axio Lab.A1 and Axiolab 5 Item no.: 430051-9000-000	Microscope stands upright	Microscope stands upright	Microscope stands upright Fine drive knob with scala, changeable Fine drive knob with scala, changeable Item no.: 430051-9000-000 Fine drive knob with scale, changeable for Axio Imager 2, Axio Lab.A1 and Axiolab 5 Item no.: 430051-9000-000
Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings Light Source Viluma 5 RGB-UV Light Source Viluma 5 RGB-UV Item no.: 423052-9641-000 Light Source Viluma 5 RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cableand a desktop power supply are included in delivery. When used at an Axio Observer with Incubator XLmulti, the Extension tube for illuminator mount, 17 mm is required. Item no.: 423052-9641-000 Control Panel for Colibri 5/7 and Viluma 5/7 Control Panel for Colibri 5/7 and Viluma 5/7 Item no.: 423052-9751-000 Control Panel for Colibri 5/7 and Viluma 5/7 with LCD to display the operating state. For LED selection and brightness setting. Item no.: 423052-9751-000	Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings Light Source Viluma 5 RGB-UV Light Source Viluma 5 RGB-UV Item no.: 423052-9641-000 Light Source Viluma 5 RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (631 nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555 nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (469 nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385 nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cableand a desktop power supply are included in delivery. When used at an Axio Observer with Incubator XLmulti, the Extension tube for illuminator mount, 17 mm is required. Item no.: 423052-9641-000 Control Panel for Colibri 5/7 and Viluma 5/7 Control Panel for Colibri 5/7 and Viluma 5/7 Item no.: 423052-9751-000 Control Panel for Colibri 5/7 and Viluma 5/7 with LCD to display the operating state. For LED selection and brightness setting. Item no.: 423052-9751-000
Transmitted-light objectives	Transmitted-light objectives	Transmitted-light objectives Objective LD A-Plan 5x/0.15 Ph1 M27 Objective LD A-Plan 5x/0.15 Ph1 M27 Item no.: 421231-9910-000 Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene) Item no.: 421231-9910-000 Objective LD A-Plan 10x/0.25 Ph1 M27 Objective LD A-Plan 10x/0.25 Ph1 M27 Item no.: 421241-9910-000 Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene) Item no.: 421241-9910-000 Objective LD A-Plan 20x/0.35 Ph2 M27 Objective LD A-Plan 20x/0.35 Ph2 M27 Item no.: 421251-9911-711 Objective LD A-Plan 20x/0.35 Ph2 M27 (FWD=4.9mm at CG=1mm polystyrene) Item no.: 421251-9911-711 Objective LD A-Plan 40x/0.55 Ph2 M27 Objective LD A-Plan 40x/0.55 Ph2 M27 Item no.: 421261-9918-000 Objective LD A-Plan 40x/0.55 Ph2 M27 (FWD=2.3mm at CG=1mm polystyrene) Item no.: 421261-9918-000	Transmitted-light objectives	Transmitted-light objectives	Transmitted-light objectives Objective LD A-Plan 20x/0.35 Ph2 M27 Objective LD A-Plan 20x/0.35 Ph2 M27 Item no.: 421251-9911-711 Objective LD A-Plan 20x/0.35 Ph2 M27 (FWD=4.9mm at CG=1mm polystyrene) Item no.: 421251-9911-711 Objective LD A-Plan 5x/0.15 Ph1 M27 Objective LD A-Plan 5x/0.15 Ph1 M27 Item no.: 421231-9910-000 Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene) Item no.: 421231-9910-000 Objective LD A-Plan 10x/0.25 Ph1 M27 Objective LD A-Plan 10x/0.25 Ph1 M27 Item no.: 421241-9910-000 Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene) Item no.: 421241-9910-000 Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 Item no.: 421381-9971-000 Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc. Item no.: 421381-9971-000 Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 Item no.: 421361-9971-000 Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm) Item no.: 421361-9971-000
Condensers	Condensers	Condensers LD condenser 0.4 for slider LD condenser 0.4 for slider Item no.: 424228-9020-000 LD condenser 0.4 for slider - for H, Ph, PlasDIC - rotatable, with click stops 0°, 90°, 180°, 270° - for objectives 5x - 63x (2.5x with diffusion disk 2.5x) - 10x46 mm slider mount - 53 mm working distance - aperture stop Item no.: 424228-9020-000 Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC Item no.: 426717-9000-000 Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC - 2 positions for Ph- or PlasDIC diaphragms - brightfield position with neutral-density filter 0.06 Item no.: 426717-9000-000 Phase stop Ph 2/0.4 for slider Phase stop Ph 2/0.4 for slider Item no.: 426717-9360-000 Phase stop Ph 2/0.4 for slider Item no.: 426717-9360-000 Phase stop Ph 1/0.4 for slider Phase stop Ph 1/0.4 for slider Item no.: 426717-9350-000 Phase stop Ph 1/0.4 for slider Item no.: 426717-9350-000	Condensers	Condensers	Condensers LD condenser 0.55 for H Ph PlasDIC DIC LD condenser 0.55 for H Ph PlasDIC DIC Item no.: 424228-9030-000 LD condenser 0.55 for H Ph PlasDIC DIC - 5-position modulator disk, freely configurable - centerable positions, position 1 with aperture stop - for objectives 5x - 100x - variable working distance from 30 to 38 mm Item no.: 424228-9030-000 Phase stop Ph 2/0.55 for condenser Phase stop Ph 2/0.55 for condenser Item no.: 426717-9180-000 Phase stop Ph 2/0.55 for condenser Item no.: 426717-9180-000 Phase stop Ph 1/0.55 for condenser Phase stop Ph 1/0.55 for condenser Item no.: 426717-9170-000 Phase stop Ph 1/0.55 for condenser Item no.: 426717-9170-000
Polarization	Polarization	Polarization	Polarization C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x Item no.: 000000-1105-192 C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism Item no.: 000000-1105-192 C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x Item no.: 000000-1105-193 C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism Item no.: 000000-1105-193 Analyzer slider A 12x35 mm, 90° rotatable Analyzer slider A 12x35 mm, 90° rotatable Item no.: 453667-9901-000 Analyzer slider A 12x35 mm, 90° rotatable - mount for lambda compensators - retractable from both sides Item no.: 453667-9901-000 Compensator pol Lambda sub. +/- 10° Compensator pol Lambda sub. +/- 10° Item no.: 453706-0000-000 Compensator pol Lambda sub. +/- 10° Item no.: 453706-0000-000	Polarization	Polarization
Transmitted-light illumination	Transmitted-light illumination	Transmitted-light illumination	Transmitted-light illumination	Transmitted-light illumination	Transmitted-light illumination Light shield to block ambient light; Axiovert Light shield to block ambient light; Axiovert Item no.: 423915-9030-000 Light shield to block ambient light; Axiovert for Axiovert 5/7 and Axio Vert.A1 Item no.: 423915-9030-000

Axiovert 7

Axiovert 7

Variants Axiovert 7

Axiovert 7 RL f/BF

Inverted microscope Axiovert 7 TL FL for Life Sciences

Axiovert 7 RL f/BF DF C-CIC POL

Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI)

Inverted microscope Axiovert 7 TL FL motorized system

Variants Axiovert 7

Axiovert 7 RL f/BF

Inverted microscope Axiovert 7 TL FL for Life Sciences

Axiovert 7 RL f/BF DF C-CIC POL

Microscope Axiovert 7 complete system for Non-Metallic-Inclusion (NMI)

Inverted microscope Axiovert 7 TL FL motorized system

Address

Contact