- ZEISS Shop
- Upright microscopes
- Axiolab 5
- Axiolab 5
- Binocular microscope Axiolab 5 for LED epi-fluorescence

Axiolab 5
Axiolab 5
Binocular microscope Axiolab 5 for LED epi-fluorescence
Item no.: 490980-0003-000 (individual configuration)Binocular microscope Axiolab 5 for LED epi-fluorescence in combination with transmitted-light bright...
Binocular microscope Axiolab 5 for LED epi-fluorescence
Item Number: 490980-0003-000 (individual configuration) Reset configurationTip
Current configuration
-
Microscope stand Axiolab 5, TL/FL, 3 channels FL-LED mount, 5x H
Item no.: 430037-9120-000Microscope stand Axiolab 5, TL/FL, 3 channels FL-LED mount, 5x H
Item Number: 430037-9120-000Microscope stand Axiolab 5, TL/FL, 3 channels FL-LED mount, 5x H encoded mechanical stage 75x30 R - FL-LED reflected-light illumination with 3-position mount for LED modules and 4-position reflector turret for P <(>&<)> C modules, coded - Z-drive with fine drive knob left and fine drive disk right, flat with scale - 15 mm focus lift - nosepiece 5x brightfield, M27 encoded - stage and condenser carrier - mechanical stage 75x30 R with hardcoat anodized surface, 210 x 145 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting - specimen holder for one-hand operation, spring lever left - transmitted-light illumination with white LED 10W, optional for halogen reflector lamp 12V 35W - Auto. mechanical shutter in TL for fluorescence mode - integrated 24V DC 60W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button supports ZEISS Axiocam - USB 2.0 to PC - dust cover - filter holder in TL
-
LED module 470 nm
Item no.: 423052-9573-000LED module 470 nm
Item Number: 423052-9573-000LED module 470 nm
-
LED module 385 nm
Item no.: 423052-9593-000LED module 385 nm
Item Number: 423052-9593-000LED module 385 nm
-
LED module 565 nm
Item no.: 423052-9602-000LED module 565 nm
Item Number: 423052-9602-000LED module 565 nm
-
Binocular phototube 30°/23 (100:0/0:100), reversed image
Item no.: 425520-9020-000Binocular phototube 30°/23 (100:0/0:100), reversed image
Item Number: 425520-9020-000Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N
-
Filter Set 109 HE LED with Reflector Module FL EC P&C (E)
Item no.: 489109-9110-400Filter Set 109 HE LED with Reflector Module FL EC P&C (E)
Item Number: 489109-9110-400Filter Set 109 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 109 HE LED shift free for use with Colibri 5/7 with excitation wavelengths 385, 475 and 555 nm. Consisting of filters TBS 405 + 493 + 575 and TBP 425/29 + 514/31 + 632/100 inserted in reflector module, reflection avoided through tilted mount for emission filters
-
Camera Adapter 60N-C 2/3" 0.63x
Item no.: 426113-0000-000Camera Adapter 60N-C 2/3" 0.63x
Item Number: 426113-0000-000Camera Adapter 60N-C 2/3" 0.63x
-
Eyepiece PL 10x/22 Br. foc.
Item no.: 444036-9010-000Eyepiece PL 10x/22 Br. foc.
Item Number: 444036-9010-000Eyepiece PL 10x/22 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
Objective N-Achroplan 5x/0.15 M27
Item no.: 420930-9901-000Objective N-Achroplan 5x/0.15 M27
Item Number: 420930-9901-000Objective N-Achroplan 5x/0.15 M27 (FWD=12.0mm)
-
Objective N-Achroplan 10x/0.25 M27
Item no.: 420940-9901-000Objective N-Achroplan 10x/0.25 M27
Item Number: 420940-9901-000Objective N-Achroplan 10x/0.25 M27 (FWD=6.5mm)
-
Objective N-Achroplan 40x/0.65 M27
Item no.: 420960-9901-000Objective N-Achroplan 40x/0.65 M27
Item Number: 420960-9901-000Objective N-Achroplan 40x/0.65 M27 (FWD=0.60mm)
-
Objective N-Achroplan 100x/1.25 Oil M27
Item no.: 420990-9900-000Objective N-Achroplan 100x/1.25 Oil M27
Item Number: 420990-9900-000Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml
-
Condenser 0.9/1.25 H
Item no.: 424225-9001-000Condenser 0.9/1.25 H
Item Number: 424225-9001-000Condenser 0.9/1.25 H For objectives 5x-100x, compatible with low-power system for objectives 2.5x/4x, WD=0.8mm
-
Microscopy Camera Axiocam 202 mono
Item no.: 426570-9010-000Microscopy Camera Axiocam 202 mono
Item Number: 426570-9010-000Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: Blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64, iOS 13 or higher Supported Application Software: ZEN 3.0 (blue edition) or higher, ZEN core v2.7 or higher Labscope v2.9.1 (Windows) oder später, v3.0 (iOS) oder später TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS Labscope software. The iOS App is available as a free download from the Apple App Store. The Windows version can be downloaded for free from the ZEISS website. Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.