- Carl Zeiss Shop
- Upright microscopes
- Axio Imager.A2
- Axio Imager.A2 complete system for Correlative Microscopy

Axio Imager.A2
Axio Imager.A2
Axio Imager.A2 complete system for Correlative Microscopy
Item no.: 490022-0013-000 (individual configuration)Axio Imager.A2 complete system for Correlative Microscopy in Life Sciences with epi-fluorescence in ...
Axio Imager.A2 complete system for Correlative Microscopy
Item Number: 490022-0013-000 (individual configuration) Reset configurationTip
Current configuration
-
Axio Imager.A2 microscope stand
Item no.: 430005-9901-000Axio Imager.A2 microscope stand
Item Number: 430005-9901-000Axio Imager.A2 microscope stand - Z-drive man., with fine drive knob and fine drive disk, flat with scala, changeable - stage/condenser carrier, detachable - transmitted-light illumination man. - double filter wheel, discrete, man. with neutral-density filter set - Light Control man. with RS 232 interface - integrated 12V DC 100W power unit, stabilized, 100V...240V AC/50...60Hz/168VA - country-specific line cable and RS 232 cable
-
6-position objective nosepiece, HD DIC M27 cod.
Item no.: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
Item Number: 424504-0000-0006-position objective nosepiece, HD DIC M27 cod.
-
6-position reflector turret man. cod. for P&C modules
Item no.: 424906-0000-0006-position reflector turret man. cod. for P&C modules
Item Number: 424906-0000-0006-position reflector turret man. cod. for P&C modules
-
Reflected-light illuminator for FL and HD for Axio Imager
Item no.: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager
Item Number: 423600-0000-000Reflected-light illuminator for FL and HD for Axio Imager with shutter and with openings for manual stop sliders and filter wheels. Transmission range 340-1100 nm. With 340 nm and 1100 nm ~40%.
-
Antiglare screen
Item no.: 452163-0000-000Antiglare screen
Item Number: 452163-0000-000Antiglare screen
-
Stop slider man. with centerable luminous-field diaphragm
Item no.: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm
Item Number: 423611-0000-000Stop slider man. with centerable luminous-field diaphragm slider stop position can be set
-
Stop slider with centerable aperture stop
Item no.: 423613-0000-000Stop slider with centerable aperture stop
Item Number: 423613-0000-000Stop slider with centerable aperture stop
-
Reflector module FL EC P&C
Item no.: 424931-0000-000Reflector module FL EC P&C
Item Number: 424931-0000-000Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
-
Illuminator microLED 2
Item no.: 423053-9072-000Illuminator microLED 2
Item Number: 423053-9072-000Illuminator microLED 2 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90 - average lifetime >60000 hours - usable for objectives from 2.5x
-
Illumination adapter for light guide (D)
Item no.: 423302-0000-000Illumination adapter for light guide (D)
Item Number: 423302-0000-000Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm
-
Illuminator HXP 120 V (D)
Item no.: 423013-9010-000Illuminator HXP 120 V (D)
Item Number: 423013-9010-000Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
-
Shutter remote control for HXP 120 V
Item no.: 000000-0544-644Shutter remote control for HXP 120 V
Item Number: 000000-0544-644Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.
-
Converter CAN - USB Rev.2 (D)
Item no.: 432909-9901-000Converter CAN - USB Rev.2 (D)
Item Number: 432909-9901-000Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable
-
DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item no.: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
Item Number: 426940-0000-000DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II
-
DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item no.: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
Item Number: 426945-0000-000DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III
-
Compensator mount 6x20
Item no.: 424705-0000-000Compensator mount 6x20
Item Number: 424705-0000-000Compensator mount 6x20
-
Analyzer module DIC ACR P&C shift free for transmitted light
Item no.: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light
Item Number: 424932-9901-000Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.
-
Mechanical Stage 75x50 mot; CAN (D)
Item no.: 432024-9903-000Mechanical Stage 75x50 mot; CAN (D)
Item Number: 432024-9903-000Mechanical Stage 75x50 mot; CAN (D) for Axio Imager and SteREO - hard coating, linear encoders - stepper motor drive with integrated controller - connection via CAN bus - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - incl. CAN cable
-
Specimen holder CorrMic LS for cover glasses 22x22 mm (D)
Item no.: 432335-9300-000Specimen holder CorrMic LS for cover glasses 22x22 mm (D)
Item Number: 432335-9300-000Specimen holder CorrMic LS for cover glasses 22x22 mm (D) - dimension 76 mm x 26 mm - mounting for cover glasses 22 mm x 22 mm - 3 calibration reference points - incl. cover glasses high performance, D=0.17mm, 22 x 22 mm, box with 200 pc.
-
Specimen holder, special, for 2 slides 76x26 mm
Item no.: 432303-0000-000Specimen holder, special, for 2 slides 76x26 mm
Item Number: 432303-0000-000Specimen holder, special, for 2 slides 76x26 mm particularly for use with immersion objectives
-
Binocular Ergophototube 20°/23 (100:0/0:100), reversed image
Item no.: 425512-0000-000Binocular Ergophototube 20°/23 (100:0/0:100), reversed image
Item Number: 425512-0000-000Binocular Ergophototube 20°/23 (100:0/0:100), reversed image variable, continuous vertical adjustment 44 mm, camera port with interface 60N
-
Conversion filter 5700-3200 K, d=25 mm
Item no.: 427809-9010-000Conversion filter 5700-3200 K, d=25 mm
Item Number: 427809-9010-000Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light
-
Filter set 49 DAPI shift free (E)
Item no.: 488049-9901-000Filter set 49 DAPI shift free (E)
Item Number: 488049-9901-000Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50
-
Filter set 20 Rhodamin shift free (F)
Item no.: 488020-9901-000Filter set 20 Rhodamin shift free (F)
Item Number: 488020-9901-000Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640
-
Filter set 38 Endow GFP shift free (E)
Item no.: 000000-1031-346Filter set 38 Endow GFP shift free (E)
Item Number: 000000-1031-346Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50
-
Camera Adapter T2-C 1'' 1.0x; adjustable
Item no.: 426105-0000-000Camera Adapter T2-C 1'' 1.0x; adjustable
Item Number: 426105-0000-000Camera Adapter T2-C 1'' 1.0x; adjustable (x,y,z and rotation)
-
Adapter 60N - T2 1.0x
Item no.: 426103-0000-000Adapter 60N - T2 1.0x
Item Number: 426103-0000-000Adapter 60N - T2 1.0x
-
Eyepiece PL 10x/23 Br. foc.
Item no.: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
Item Number: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
Objective EC Plan-Neofluar 10x/0.3 M27
Item no.: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27
Item Number: 420340-9901-000Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)
-
Objective EC Plan-Neofluar 20x/0.50 M27
Item no.: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27
Item Number: 420350-9900-000Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)
-
Objective EC Plan-Neofluar 40x/0.75 M27
Item no.: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27
Item Number: 420360-9900-000Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item no.: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27
Item Number: 420490-9900-000Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.
-
Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item no.: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC
Item Number: 424200-9901-000Achromatic-aplanatic universal condenser 0.9 H D Ph DIC with switchable front lens, turret disk, with centerable Ph1, Ph2, Ph3 and D stops, already integrated, 3 mounts for DIC condenser modules, 1 separate position for bright field. For objective magnifications 1.0x-100x, WD=1.2mm
-
Condenser module DIC I/0.9 with polarizer
Item no.: 426701-0000-000Condenser module DIC I/0.9 with polarizer
Item Number: 426701-0000-000Condenser module DIC I/0.9 with polarizer
-
Condenser module DIC II/0.9 with polarizer
Item no.: 426702-0000-000Condenser module DIC II/0.9 with polarizer
Item Number: 426702-0000-000Condenser module DIC II/0.9 with polarizer
-
Condenser module DIC III/0.9 with polarizer
Item no.: 426703-0000-000Condenser module DIC III/0.9 with polarizer
Item Number: 426703-0000-000Condenser module DIC III/0.9 with polarizer
-
Joystick XY; CAN (D)
Item no.: 432903-9011-000Joystick XY; CAN (D)
Item Number: 432903-9011-000Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
-
Microscopy Workstation Compact Core i5 multilingual (O)
Item no.: 410201-9910-000Microscopy Workstation Compact Core i5 multilingual (O)
Item Number: 410201-9910-000Microscopy Workstation Compact Core i5 multilingual (O) - HP Z240 Tower Workstation - CPU: Intel® CoreTM i5-6500 3.2 GHz 6 MB / 2133 MHz - Chipset: Intel® C236 - Memory: max. 64 GB RAM - Memory Expansion Slots: 4 x DDR3-RAM modules / 2133 MHz unbuffered, non-ECC - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 (x16 mechanical) 1 x PCI Express Generation 3 x4 1 x PCI Express Generation 3 x1 1 M.2 slot (PCIe Gen3 x4) - Graphics interface onboard: Intel® HD Graphics 530 2 x Display Port 1.2 (max. 3840 x 2160 pixel), 1 x DVI-D single link (max. 1920 x 1200 pixel) - Hard Drives: 1 x 4 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: Integrated 10/100/1000 LAN interface - I/O: 1 x serial RS232, 6 x USB 3.0 (2 x front, 4 x rear), 4 x USB 2.0 (2 x front, 2 x rear), PS/2 for keyboard and mouse - Certifications & Declarations: CE, CSA, UL, FCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 400 W with country specific plug - Chassis Dimensions: (H x W x D): 399 x 170 x 442 mm, approx. 10 kg - Rescue kit
-
Language Package Windows 7 Ultimate Embedded x64 English US (O)
Item no.: 410377-0200-000Language Package Windows 7 Ultimate Embedded x64 English US (O)
Item Number: 410377-0200-000Language Package Windows 7 Ultimate Embedded x64 English US (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with english (US) layout
-
Monitor TFT 24'' HP Z24n G2 (61 cm) (O)
Item no.: 410350-2406-000Monitor TFT 24'' HP Z24n G2 (61 cm) (O)
Item Number: 410350-2406-000Monitor TFT 24'' HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
-
Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)
Item no.: 410201-1603-000Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)
Item Number: 410201-1603-000Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O) consisting of 1 x 16 GB module
-
Microscopy Camera Axiocam 503 mono (D)
Item no.: 426559-0000-000Microscopy Camera Axiocam 503 mono (D)
Item Number: 426559-0000-000Microscopy Camera Axiocam 503 mono (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3'' (11 mm diagonal) Spectral range: With protection glass app. 400 nm to 1000 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 640 x 484 3x3 480 x 364 4x4 384 x 292 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with ''Burst Mode''-function Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 5.6 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3''x3.2''x1.7'') / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4'' photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems
-
ZEN 2.6 pro Hardware License Key
Item no.: 410135-1002-260ZEN 2.6 pro Hardware License Key
Item Number: 410135-1002-260ZEN 2.6 pro Hardware License Key Image acquisition and processing under Win 7 / 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following modules are included: - ZEN Module Measurement - ZEN Module Multi Channel - ZEN Module Panorama - ZEN Module Manual Extended Focus - ZEN Module Connect Entry
-
ZEN Module Shuttle & Find
Item no.: 410136-1056-120ZEN Module Shuttle & Find
Item Number: 410136-1056-120ZEN Module Shuttle & Find Module for acquisition and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with light microscope - Transfer of images with position data to SEM and XB running Shuttle & Find module under ZEN software - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images
-
Dust protection Set L
Item no.: 434304-0000-000Dust protection Set L
Item Number: 434304-0000-000Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm