Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
SteREO Discovery.V8 microscope body Apochromatic stereo telescope system with 76 mm mount diameter, with 8:1 zoom (1.0x ... 8.0x) manually operable on both sides and switchable click stops at 1x-1.25x-1.6x-2x-2.5x-3.2x-4x-5x-6.3x-8x
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, cable 435403-9030 to focus motor 3 or 435610-5003 to motor 2 additionally required, - 1x SYCOP 3, 2x KL 2500 LCD, 2x footswitch, - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB to work station, 1x RS232 (D-Sub DE9), incl. USB cable 2m and country-specific power cable
Objective slider S /doc (D) on SteREO Discovery for vertical imaging through right (axial mode) or left channel with one tandem mono or one stereo objective and for stereo observation with last mentioned one in central position of slider
Base 300 for epi-illumination WxDxH 290x353x25mm stand base with 2x M8 threaded holes and b/w plate D=120mm; compatible to T column 350mm and central profile column 490mm; VisiLED transmitted light (417095-9400) mountable from below, in addition glass plate D=120mm (435501-0002); stage d=84mm needs adapter 84/120 (435430-9010) additionally
Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
System configuration 5 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Installation of ZEN software for LSM 800 and LSM 900 systems - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5
Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5
Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
Microscopy Camera Axiocam 705 pol (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel(8 out of 14 bit or compression mode) Dark Current: <(><<)>0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.3 (blue edition) or higher, ZEN core v3.1 or higher The required application software is available via the ZEISS Download Center.
ZEN Module Tiles & Positions Module for automatic scanning of predefined sample areas, plus acquisition of images according to a position list. Supports focus correction maps, stitching and shading correction. Compatible with software autofocus.
ZEN Module Autofocus Module for determination of the optimal focus position in the sample. The autofocus works with transmitted, reflected and fluorescence light. Definition of an autofocus region in the camera image.
ZEN Module Technical Cleanliness Analysis Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-V): (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with Intellesis Object Classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Requires in addition ZEN Module Intellesis Object Classification. (IV) light microscope workflow for correlative technical cleanliness analysis with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Modules Connect and Connect 2D add-on. (V) light microscope workflow for correlative component cleanliness analysis with Intellesis Object Classification. Contains trainable, pre-trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Modules Intellesis Object Classification, Connect and Connect 2D add-on. The job templates cover image acquisition, image analysis and image processing, result presentation in interactive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data.
ZEN core v3.4 Image acquisition and processing for light microscopy using Windows 10 (64bit). - User interface offers stepless scaling and zooming for optimal adjustment to the screen size - Workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes that can be configured in MicroToolbox 2011, Axiocam cameras and additional components. Interactive and automatic control of the individual motorized microscope components. Transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras, b/w images with up to 16 bits, color images with up to 3 x 16 bits. - Adjustment of the display parameters without changing the pixel values - Fully automatic assignment of geometric scaling's when acquiring an image (depending on the microscope configuration) - Recording and saving of acquisition history as meta data in CZI image format - Automatic saving of acquired images in CZI or other image formats (including meta data) - Configuration options for the graphical user interface: Generation of workbenches, creation of job templates, execution of job templates bars and definition of properties of standard graphic elements - Save into BMP, GIF, JPG, PNG, TIFF, WDP, WMP image formats - Navigator window - Management, visualization and printing of meta data and images - μ bar scalings - Text annotation - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Input Form Designer with automated customer data import - Data zone functionality, also burned in saved images - Interface to ImageJ software - Video recorder functionality - HDR - Acquisition of High Dynamic Range Images - Online Panorama: For acquisition of tiles images on un-coded/un- motorized stages - Panorama function for acquisition of tiles images on manual stages - ZEN Module Manual Extended Depth of Focus (EDF) capability - Best Image function for optimal exposure and lightpath settings by choosing from automatic acquired images - ZEN Module Measurement: Interactive/dimensional measurement: length, area, contour-based measurement data (area, box, perimeter, gray values), angle, weld seams "(A-Measure)", Multi-Interdistance - Loops in job templates to enable various number of evaluations as well as performing of Batch Mode - Contains ZEN Connect basic functionality - 2D Overlay CAD (Computer Aided Design) files with ZEN Images, provided file formats: *.dxf, *.dwg, *.igs, *. Iges, *.rle, *.stp, *.step, *.brp - F2 hot key for 2D Image Acquisition e.g. via Footswitch - Predefining and renaming of Images and documents for freemode - Multi-Image-view - Table processing (e.g. join multiple tables, statistical values) - Electron microscopes can be used for image acquisition - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Data Archive (Browse Results) for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting (e.g. Excel), importing (any file format via drag n drop) - Topography viewer for 2.5D visualization of EDF Images incl. profile line measurement Contains also the functionality of the modules: - ZEN Module Panorama - ZEN Module Manual Extended Focus - ZEN Module Measurement - ZEN Module APEER (on-site) Basic * *The APEER (on-site) Basic connector enables the execution of customized DEMO solutions by integrating modules from the APEER platform Microsoft and Microsoft Surface are trademarks of the Microsoft group