ZEISS Shop
Inverted microscopes
Axiovert 5/7
Axiovert 5
Inverted microscope Axiovert 5 TL f/BF Ph1

Axiovert 5

Inverted microscope Axiovert 5 TL f/BF Ph1

Item no.: 491237-0022-000 (individual configuration)

Description

Inverted microscope Axiovert 5 TL for transmitted-light brightfield and phase contrast Ph1

Full description

Inverted microscope Axiovert 5 TL f/BF Ph1

Item Number: 491237-0022-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Microscope stand Axiovert 5 TL

Recover

Item no.: 431030-9050-000

Microscope stand Axiovert 5 TL

Item Number: 431030-9050-000

Microscope stand Axiovert 5 TL - 6-position nosepiece B DIC M27, encoded with 10x29 mm slider mount - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm - manual coarse/finefocus drive - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager - USB 2.0, Type B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set
Ergo intermediate piece H=50 mm for optimization of viewing height

Recover

Item no.: 425146-9040-000

Ergo intermediate piece H=50 mm for optimization of viewing height

Item Number: 425146-9040-000

Ergo intermediate piece H=50 mm for optimization of viewing height

Stand accessories

0 added 0 removed

Bulbs

0 added 0 removed

Polarization

0 added 0 removed

Stages and accessories

0 added 0 removed

Specimen stage 232x230 mm with hardcoat anodized surface

Recover

Item no.: 432037-9000-000

Specimen stage 232x230 mm with hardcoat anodized surface

Item Number: 432037-9000-000

Specimen stage 232x230 mm with hardcoat anodized surface - Object guide M mountable on both sides

Tubes and accessories

0 added 0 removed

Binocular tube 45°/23

Recover

Item no.: 425523-9000-000

Binocular tube 45°/23

Item Number: 425523-9000-000

Binocular tube 45°/23 - upright and unreversed image

Optovar systems

0 added 0 removed

Filters

0 added 0 removed

Conversion filter 5700-3200 K, d=32 mm

Recover

Item no.: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm

Item Number: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light
Green filter, d=32x2 mm

Recover

Item no.: 000000-1374-896

Green filter, d=32x2 mm

Item Number: 000000-1374-896

Green filter, d=32x2 mm for contrast enhancement for phase contrast and b/w image recording
Neutral-density filter 0.06, d=32x2

Recover

Item no.: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item Number: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Photomicrography

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Objective LD A-Plan 5x/0.15 Ph1 M27

Recover

Item no.: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27

Item Number: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)
Objective LD A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27

Item Number: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)
Objective LD A-Plan 20x/0.35 Ph1 M27

Recover

Item no.: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27

Item Number: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)

Immersion oils

0 added 0 removed

Condensers

0 added 0 removed

LD condenser 0.3 for slider

Recover

Item no.: 424228-9000-000

LD condenser 0.3 for slider

Item Number: 424228-9000-000

LD condenser 0.3 for slider - for H, Ph, PlasDIC - rotatable, with click stops 0°, 90°, 180°, 270° - for objectives 2.5x - 40x (1.25x with diffusion disk 1.25x) - 10x46 mm slider mount - 72 mm working distance - aperture stop
Slider 10x46 mm with fixed phase stop Ph 1/0.3

Recover

Item no.: 426717-9030-000

Slider 10x46 mm with fixed phase stop Ph 1/0.3

Item Number: 426717-9030-000

Slider 10x46 mm with fixed phase stop Ph 1/0.3

Connecting cables

0 added 0 removed

Control devices

0 added 0 removed

Image processing

0 added 0 removed

Services

0 added 0 removed

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Inverted microscope Axiovert 5 TL f/BF Ph1
Item Number: 491237-0022-000 (individual configuration)
Microscope stands upright (1)

Special accessories

Item has been added to the configuration

Fine drive knob with scala, changeable

Recover

Item no.: 430051-9000-000

Fine drive knob with scala, changeable

Item Number: 430051-9000-000

Fine drive knob with scale, changeable for Axio Imager 2, Axio Lab.A1 and Axiolab 5

Microscope stands inverted (12)

Routine microscopes

Item has been added to the configuration

Microscope stand Axiovert 5 RL TL SCB

Recover

Item no.: 431030-9170-000

Microscope stand Axiovert 5 RL TL SCB

Item Number: 431030-9170-000

Microscope stand Axiovert 5 RL TL SCB with integrated Smart Control Box - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BD with white LED 10W (average LED lifetime > 60000 hrs), slider mounts for luminous-field diaphragm, aperture stop, polarizer- and filter slider - interface for alternative reflected-light illuminator HAL 100 - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - TL/RL switching - snap button for ZEISS Axiocam - ECO mode - Light manager for RL and TL LED - Smart Control Box - for stand-alone operation (without PC) of microscope stand functions with ZEISS Axiocam (105 R2, 202, 208, 305, 705) via On Screen Display and for usage with Labscope (Windows and iOS) - Automatic features for camera control, Image enhancement functions and readout of encoded microscope functions - Provided interfaces: HDMI, USB 3.0 Type-C and Type-A, USB 2.0 Type- A, Ethernet, Micro-D - Wi-Fi compatibility via USB Wi-Fi adapter and router - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable 0.5 m for Axiocam 305 - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set

Item has been added to the configuration

Microscope stand Axiovert 5 TL SCB

Recover

Item no.: 431030-9120-000

Microscope stand Axiovert 5 TL SCB

Item Number: 431030-9120-000

Microscope stand Axiovert 5 TL SCB with integrated Smart Control Box - 6-position nosepiece B DIC M27, encoded with 10x29 mm slider mount - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager - Smart Control Box - for stand-alone operation (without PC) of microscope stand functions with ZEISS Axiocam (105 R2, 202, 208, 305, 705) via On Screen Display and for usage with Labscope (Windows and iOS) - Automatic features for camera control, Image enhancement functions and readout of encoded microscope functions - Provided interfaces: HDMI, USB3.0 Type C and Type A, USB 2.0 Type A, Ethernet, Micro-D - Wi-Fi compatibility via USB Wi-Fi adapter and router - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable 0.5 m for Axiocam 305 - USB 2.0, Type B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24VDC,5A - country specific power cable - Dust protection set

Item has been added to the configuration

Microscope stand Axiovert 5 RL SCB

Recover

Item no.: 431030-9070-000

Microscope stand Axiovert 5 RL SCB

Item Number: 431030-9070-000

Microscope stand Axiovert 5 RL SCB with integrated Smart Control Box - 6-position nosepiece BD DIC M27, encoded with 6x20 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - 12x35 mm mount for analyzer slider - Reflected-light illumination BD with white LED 10W (average LED lifetime > 60000 hrs), slider mounts for luminous-field diaphragm, aperture stop, polarizer- and filter slider - interface for alternative HAL 100 illuminator - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager for RL LED - Smart Control Box - for stand-alone operation (without PC) of microscope stand functions with ZEISS Axiocam (105 R2, 202, 208, 305, 705) via On Screen Display and for usage with Labscope (Windows and iOS) - Automatic features for camera control, Image enhancement functions and readout of encoded microscope functions - Provided interfaces: HDMI, USB 3.0 Type-C and Type-A, USB 2.0 Type- A, Ethernet, Micro-D - Wi-Fi compatibility via USB Wi-Fi adapter and router - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable 0.5 m for Axiocam 305 - USB 2.0, Type-B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set

Item has been added to the configuration

Microscope stand Axiovert 5 TL FL SCB

Recover

Item no.: 431030-9060-000

Microscope stand Axiovert 5 TL FL SCB

Item Number: 431030-9060-000

Microscope stand Axiovert 5 TL FL SCB with integrated Smart Control Box - 6-position nosepiece B DIC M27, encoded with 10x29 mm slider mount - 6-position reflector turret, encoded for P<(>&<)>C modules - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm with phosphorescence block filter - Reflected light illumination with interface for Colibri / HBO / HXP / X-Cite Xylis® / HAL 100, with slider mounts for luminous-field diaphragm, aperture stop and filter slider - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - TL/FL switching - snap button for ZEISS Axiocam - ECO mode - Light manager for TL LED and Colibri 3 - CAN port for Colibri 3 - Smart Control Box - for stand-alone operation (without PC) of microscope stand functions with ZEISS Axiocam (105 R2, 202, 208, 305, 705) via On Screen Display and for usage with Labscope (Windows and iOS) - Automatic features for camera control, Image enhancement functions and readout of encoded microscope functions - Provided interfaces: HDMI, USB 3.0 Type-C and Type-A, USB 2.0 Type- A, Ethernet, Micro-D - Wi-Fi compatibility via USB Wi-Fi adapter and router - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable 0.5 m for Axiocam 305 - USB 2.0,Type B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set

Item has been added to the configuration

Microscope stand Axiovert 5 TL

Recover

Item no.: 431030-9050-000

Microscope stand Axiovert 5 TL

Item Number: 431030-9050-000

Microscope stand Axiovert 5 TL - 6-position nosepiece B DIC M27, encoded with 10x29 mm slider mount - Carrier transmitted-light with integrated white LED 10W (average LED lifetime > 60000 hrs) and 2-position filter slider, d=32 mm - manual coarse/finefocus drive - 13 mm focus lift with adjustable focus stop - snap button for ZEISS Axiocam - ECO mode - Light manager - USB 2.0, Type B interface to PC - external power adaptor input: 100-240V AC, 50/60Hz output: 24V DC, 5A - country specific power cable - Dust protection set

Special accessories

Item has been added to the configuration

Slider with Beam Splitter 20/80% for Intermediate Phototube

Recover

Item no.: 425146-9070-000

Slider with Beam Splitter 20/80% for Intermediate Phototube

Item Number: 425146-9070-000

Slider with Beam Splitter 20/80% for Intermediate Phototube - 2 click stop positions for 100vis/20vis:80doc

Item has been added to the configuration

Slider with Beam Splitter 50% for Intermediate Phototube

Recover

Item no.: 425146-9061-000

Slider with Beam Splitter 50% for Intermediate Phototube

Item Number: 425146-9061-000

Slider with Beam Splitter 50% for Intermediate Phototube - 2 clickstop positions for 100vis/50vis:50doc

Item has been added to the configuration

Slider with Mirror 100% for Intermediate Phototube

Recover

Item no.: 425146-9051-000

Slider with Mirror 100% for Intermediate Phototube

Item Number: 425146-9051-000

Slider with Mirror 100% for Intermediate Phototube - 2 clickstop positions for 100vis/100doc

Item has been added to the configuration

Ergo intermediate piece H=50 mm for optimization of viewing height

Recover

Item no.: 425146-9040-000

Ergo intermediate piece H=50 mm for optimization of viewing height

Item Number: 425146-9040-000

Ergo intermediate piece H=50 mm for optimization of viewing height

Item has been added to the configuration

Intermediate phototube H=50mm, left port

Recover

Item no.: 425146-9031-000

Intermediate phototube H=50mm, left port

Item Number: 425146-9031-000

Intermediate phototube H=50mm, left port - Camera port with interface 60N - Slider mount with 2 clickstop positions Additionally required: - Slider with mirror 100% - Slider with beam splitter 50% - Slider with beam splitter 20/80%

Item has been added to the configuration

Ergo intermediate piece H=25 mm for optimization of viewing height

Recover

Item no.: 425146-9020-000

Ergo intermediate piece H=25 mm for optimization of viewing height

Item Number: 425146-9020-000

Ergo intermediate piece H=25 mm for optimization of viewing height

Special accessories

Item has been added to the configuration

Aqua Stop II

Recover

Item no.: 431716-0000-000

Aqua Stop II

Item Number: 431716-0000-000

Aqua Stop II for Axio Observer, Axiovert 5 and Axiovert 200

Stand accessories (3)

Filter slider

Item has been added to the configuration

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm

Recover

Item no.: 428307-9000-000

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm

Item Number: 428307-9000-000

Filter slider A 14x40 mm, 2 positions for filter diameter 25 mm for reflected light with shutter function

Item has been added to the configuration

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm

Recover

Item no.: 423730-9080-000

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm

Item Number: 423730-9080-000

Filter slider A 14x40 mm, 3 positions for filter diameter 25 mm for reflected light with shutter function

Manual filter magazine

Item has been added to the configuration

Slider 14x40 FL attenuator, discrete

Recover

Item no.: 423730-9130-000

Slider 14x40 FL attenuator, discrete

Item Number: 423730-9130-000

Slider 14x40 FL attenuator, discrete For insert into the aperture stop plane of reflected-light illuminator. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.

Transmitted-light illumination (2)

Transmitted-light illumination carrier

Item has been added to the configuration

Adapter for expansion of specimen space by 60 mm; Axiovert

Recover

Item no.: 423915-9040-000

Adapter for expansion of specimen space by 60 mm; Axiovert

Item Number: 423915-9040-000

Adapter for expansion of specimen space by 60 mm; Axiovert - for Axiovert 5/7 - Insert between carrier for transmitted-light illumination and stand - Expansion to max. sample height of altogether 220 mm between condenser interface and stage surface

Various transmitted-light accessories

Item has been added to the configuration

Light shield to block ambient light; Axiovert

Recover

Item no.: 423915-9030-000

Light shield to block ambient light; Axiovert

Item Number: 423915-9030-000

Light shield to block ambient light; Axiovert for Axiovert 5/7 and Axio Vert.A1

Reflected-light illumination (14)

Reflector slider for Axioskop 1

Item has been added to the configuration

Beam splitter 50%, 26x36mm

Recover

Item no.: 446310-0002-000

Beam splitter 50%, 26x36mm

Item Number: 446310-0002-000

Beam splitter 50%, 26x36mm

Reflector modules

Item has been added to the configuration

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Recover

Item no.: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Item Number: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable Filter equipment in Axio Imager.Z2 or Axio Observer.Z1 freely programmable. Contains a diaphragm for covering light from the objective's darkfield channel. Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module with analyzer ACR P&C for reflected light

Recover

Item no.: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item Number: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item has been added to the configuration

Reflector module C-DIC/TIC ACR P&C for reflected light

Recover

Item no.: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light

Item Number: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization

Item has been added to the configuration

Reflector module DIC/Pol ACR P&C shift free for reflected light

Recover

Item no.: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light

Item Number: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other

Item has been added to the configuration

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Recover

Item no.: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Item Number: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light suitable for color DIC and polarization in reflected light, consisting of two Pol filters with lambda plate that are firmly oriented towards each other

Item has been added to the configuration

Reflector module FL EC P&C

Recover

Item no.: 424931-0000-000

Reflector module FL EC P&C

Item Number: 424931-0000-000

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item has been added to the configuration

Reflector module polarizer ACR P&C for reflected light

Recover

Item no.: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item Number: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item has been added to the configuration

Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Aperture diaphragm slider

Item has been added to the configuration

Stop slider A 14x40 mm with aperture/luminous field diaphragm

Recover

Item no.: 423730-9151-000

Stop slider A 14x40 mm with aperture/luminous field diaphragm

Item Number: 423730-9151-000

Stop slider A 14x40 mm with aperture/luminous field diaphragm - aperture diaphragm for Axio Scope - luminous field diaphragm for Axiovert 5/7 , Axio Vert.A1

Item has been added to the configuration

Stop slider A 14x40 mm with aperture diaphragm for Axio Vert

Recover

Item no.: 423655-9020-000

Stop slider A 14x40 mm with aperture diaphragm for Axio Vert

Item Number: 423655-9020-000

Stop slider A 14x40 mm with aperture diaphragm for Axiovert 5/7, Axio Vert.A1

Various accessories for reflected-light illumination

Item has been added to the configuration

Illumination adapter A, achromatic, for Axio Vert

Recover

Item no.: 423655-9050-000

Illumination adapter A, achromatic, for Axio Vert

Item Number: 423655-9050-000

llumination adapter A, achromatic - for Axiovert 5/7 and Axio Vert.A1 - for achromatization of the reflected light beam path - especially recommended for fluorescence microscopy with shorter excitation wavelengths

Fluorescence protection devices

Item has been added to the configuration

Antiglare screen for Axio Observer/Axiovert 200

Recover

Item no.: 000000-1109-741

Antiglare screen for Axio Observer/Axiovert 200

Item Number: 000000-1109-741

Antiglare screen for Axio Observer/Axiovert

Lamps and Lamp housings (21)

Switching mirrors

Item has been added to the configuration

Switching mirror for 2 illuminators

Recover

Item no.: 447230-9903-000

Switching mirror for 2 illuminators

Item Number: 447230-9903-000

Switching mirror for 2 illuminators

Various lamp accessories

Item has been added to the configuration

Sheathing for Light Guide HXP for Stabilization

Recover

Item no.: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization

Item Number: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization Stabilization of position of the light guide in operation. Avoidance of variation in illumination uniformity due to unwanted movement of the light guide.

Item has been added to the configuration

LED Trigger Box for Colibri 5/7

Recover

Item no.: 423052-9760-000

LED Trigger Box for Colibri 5/7

Item Number: 423052-9760-000

LED Trigger Box for Colibri 5/7 for signal distribution

Item has been added to the configuration

Control Panel for Colibri 5/7

Recover

Item no.: 423052-9751-000

Control Panel for Colibri 5/7

Item Number: 423052-9751-000

Control Panel for Colibri 5/7 with LCD to display the operating state. For LED selection and brightness setting.

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Adapters

Item has been added to the configuration

Illumination adapter for light guide (D)

Recover

Item no.: 423302-0000-000

Illumination adapter for light guide (D)

Item Number: 423302-0000-000

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

Item has been added to the configuration

Distance ring 35 mm for illuminators

Recover

Item no.: 000000-1049-429

Distance ring 35 mm for illuminators

Item Number: 000000-1049-429

Distance ring 35 mm for illuminators

LED lamps

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Recover

Item no.: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Item Number: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Recover

Item no.: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Item Number: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (511nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Recover

Item no.: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Item Number: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RYB-UV

Recover

Item no.: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV

Item Number: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RGB-UV

Recover

Item no.: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV

Item Number: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 5, Type RGB-UV

Recover

Item no.: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV

Item Number: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light source Colibri 3, Type RGB-UV

Recover

Item no.: 423052-9505-000

Solid-State Light source Colibri 3, Type RGB-UV

Item Number: 423052-9505-000

Solid-State Light source Colibri 3, Type RGB-UV 4-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL SCB for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via, OnScreenDisplay (OSD) for Axioscope with in Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 4 solid state LED lamps. - Red (625nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes - UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258

Item has been added to the configuration

Solid-State Light source Colibri 3, Type GB

Recover

Item no.: 423052-9450-000

Solid-State Light source Colibri 3, Type GB

Item Number: 423052-9450-000

Solid-State Light source Colibri 3, Type GB 2-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL stand for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via OnScreenDisplay (OSD) for Axioscope with Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 2 solid state LED lamps. - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes

Item has been added to the configuration

Solid-State Light source Colibri 3, Type GB-UV

Recover

Item no.: 423052-9440-000

Solid-State Light source Colibri 3, Type GB-UV

Item Number: 423052-9440-000

Solid-State Light source Colibri 3, Type GB-UV 3-channel fluorescence light source with integrated control unit in Axioscope and Axiovert 5 TL FL SCB stand for continuous brightness adjustment, quickly switchable and adjustable by stand or - by Stand alone operation mode via OnScreenDisplay (OSD) for Axioscope with Axiocam 202/208 - by Stand alone mode via OnScreenDisplay (OSD) for Axiovert 5 TL FL SCB with Axiocam 105 R2/202/208/305/705 - software Labscope or ZEN Equipped with 3 solid state LED lamps. - Green (565nm) for excitation of Cy3, TRITC, DsRed and similar dyes - Blue (470nm) for excitation of eGFP, Fluo4, FITC and similar dyes - UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258

Cold-light sources

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

Item has been added to the configuration

Illumination Unit X-Cite Xylis (D)

Recover

Item no.: 423006-9000-000

Illumination Unit X-Cite Xylis (D)

Item Number: 423006-9000-000

Illumination Unit X-Cite Xylis (D) LED-based white light source for fluorescence excitation Wavelength Range: 380-770 nm LED Peaks (nm): 385, 430, 475, 545, 650, 735 Control Options: speedDIAL (manual control), TTL on/off, USB LEDon/off response Times: 100 μs TTL / 1 ms USB Incl. 3 mm liquid light guide

HBO/XBO lamp housing

Item has been added to the configuration

HBO 50 illuminator with collector

Recover

Item no.: 423003-9000-000

HBO 50 illuminator with collector

Item Number: 423003-9000-000

HBO 50 illuminator with collector and lamp mount and heat-reflecting filter

Low-voltage and halogen lamp housings

Item has been added to the configuration

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Light guides

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (5)

LED modules for microscope statives

Item has been added to the configuration

LED module 505 nm for Axio

Recover

Item no.: 423052-9562-000

LED module 505 nm for Axio

Item Number: 423052-9562-000

LED module 505 nm with excitation filter BP511/44 and ACR chip Cyan (505 nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes average LED lifetime > 60000 hrs.

Item has been added to the configuration

LED module 590 nm

Recover

Item no.: 423052-9543-000

LED module 590 nm

Item Number: 423052-9543-000

LED module 590 nm with excitation filter BP591/27 and ACR chip Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Average LED lifetime > 60000 hrs

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 50 AC L1 (F)

Recover

Item no.: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item Number: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Halogen lamps

Item has been added to the configuration

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (3)

Various electrical accessories

Item has been added to the configuration

Converter CAN - USB Rev.2 (D)

Recover

Item no.: 432909-9901-000

Converter CAN - USB Rev.2 (D)

Item Number: 432909-9901-000

Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable

Power units

Item has been added to the configuration

Power supply external for HAL 100 and LED lamps

Recover

Item no.: 432610-9060-000

Power supply external for HAL 100 and LED lamps

Item Number: 432610-9060-000

Power supply external for HAL 100 and LED lamps stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Incl. 2 lamp sockets for HAL 100/VIS-LED with switch. With country-specific line cable.

Ballasts

Item has been added to the configuration

Power supply unit for HBO 50

Recover

Item no.: 432607-0000-000

Power supply unit for HBO 50

Item Number: 432607-0000-000

Power supply unit for HBO 50 100...240V, 50...60 Hz, 90VA

Polarization (36)

Compensators

Item has been added to the configuration

Compensator Lambda

Recover

Item no.: 453707-0000-000

Compensator Lambda

Item Number: 453707-0000-000

Compensator Lambda

Item has been added to the configuration

Compensator pol Lambda sub. +/- 10°

Recover

Item no.: 453706-0000-000

Compensator pol Lambda sub. +/- 10°

Item Number: 453706-0000-000

Compensator pol Lambda sub. +/- 10°

Analyzers

Item has been added to the configuration

Analyzer slider A 12x35 mm, 90° rotatable

Recover

Item no.: 453667-9901-000

Analyzer slider A 12x35 mm, 90° rotatable

Item Number: 453667-9901-000

Analyzer slider A 12x35 mm, 90° rotatable - mount for lambda compensators - retractable from both sides

Item has been added to the configuration

Analyzer slider fixed for transmitted light, 6x20

Recover

Item no.: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item Number: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item has been added to the configuration

Analyzer fixed for contrast slider 10x29 mm

Recover

Item no.: 428108-9000-000

Analyzer fixed for contrast slider 10x29 mm

Item Number: 428108-9000-000

Analyzer fixed for contrast slider 10x29 mm

Item has been added to the configuration

Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item has been added to the configuration

Analyzer module DIC ACR P&C shift free for transmitted light

Recover

Item no.: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light

Item Number: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.

Item has been added to the configuration

Analyzer module DIC ACR P&C for transmitted light

Recover

Item no.: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light

Item Number: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light optimized for DIC in transmitted light, not suitable for polarization

DIC slider PlasDIC

Item has been added to the configuration

PlasDIC slider for LD PN 63x/0.75 corr

Recover

Item no.: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item Number: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item has been added to the configuration

PlasDIC slider for LD PN 40x/0.60 corr

Recover

Item no.: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item Number: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item has been added to the configuration

PlasDIC slider for LD PN 20x/0.40 corr

Recover

Item no.: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item Number: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item has been added to the configuration

Slider PlasDIC for LD A-Plan 10x-63x

Recover

Item no.: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Item Number: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Polarizers D

Item has been added to the configuration

Polarizer slider D 10x46 mm, 90° rotatable

Recover

Item no.: 428109-9000-000

Polarizer slider D 10x46 mm, 90° rotatable

Item Number: 428109-9000-000

Polarizer slider D 10x46 mm, 90° rotatable - for LD condenser 0.4 for H Ph PlasDIC DIC iHMC

Polarizers A

Item has been added to the configuration

Polarizer slider A 6x30 mm, 90° rotatable

Recover

Item no.: 427710-9000-000

Polarizer slider A 6x30 mm, 90° rotatable

Item Number: 427710-9000-000

Polarizer slider A 6x30 mm, 90° rotatable usable with reflected-light illuminator HD DIC

Various DIC accessories

Item has been added to the configuration

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29 mm

Recover

Item no.: 426980-9040-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29 mm

Item Number: 426980-9040-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29 mm

Item has been added to the configuration

Slit diaphragm 5 mm PlasDIC for slider (40x/63x)

Recover

Item no.: 426717-9340-000

Slit diaphragm 5 mm PlasDIC for slider (40x/63x)

Item Number: 426717-9340-000

Slit diaphragm 5 mm PlasDIC for slider (40x/63x)

Item has been added to the configuration

Slit diaphragm 3.5 mm PlasDIC for slider (10x-40x)

Recover

Item no.: 426717-9330-000

Slit diaphragm 3.5 mm PlasDIC for slider (10x-40x)

Item Number: 426717-9330-000

Slit diaphragm 3.5 mm PlasDIC for slider (10x-40x)

Item has been added to the configuration

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Recover

Item no.: 426717-9120-000

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Item Number: 426717-9120-000

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Item has been added to the configuration

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

Recover

Item no.: 426717-9110-000

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

Item Number: 426717-9110-000

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

DIC slider 50x for reflected light

Item has been added to the configuration

DIC slider EC EP 40x/0.6 Epi+

Recover

Item no.: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item Number: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item has been added to the configuration

DIC slider EC EP 50x/0.7 Epi+

Recover

Item no.: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item Number: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item has been added to the configuration

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Recover

Item no.: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item Number: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item has been added to the configuration

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Recover

Item no.: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Item Number: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

DIC slider 20x for reflected light

Item has been added to the configuration

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Recover

Item no.: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item Number: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item has been added to the configuration

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Recover

Item no.: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Item Number: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

DIC slider 100x for reflected light

Item has been added to the configuration

DIC slider EC EP 100x/0.8 Epi+

Recover

Item no.: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item Number: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item has been added to the configuration

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Recover

Item no.: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Item Number: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

DIC slider type 0

Item has been added to the configuration

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Recover

Item no.: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Item Number: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

DIC slider type II

Item has been added to the configuration

DIC slider LD PN 63x/0.75 II

Recover

Item no.: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item Number: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item has been added to the configuration

DIC slider LD PN 40x/0.60 II

Recover

Item no.: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item Number: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item has been added to the configuration

DIC slider LD PN 20x/0.40 II

Recover

Item no.: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item Number: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item has been added to the configuration

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Recover

Item no.: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item Number: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

DIC slider type III

Item has been added to the configuration

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Recover

Item no.: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item Number: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

C-DIC/TIC sliders and prisms

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Recover

Item no.: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Item Number: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Recover

Item no.: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Item Number: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism

Item has been added to the configuration

TIC slider 6x20

Recover

Item no.: 000000-1105-190

TIC slider 6x20

Item Number: 000000-1105-190

TIC slider 6x20 with rotary slide-in DIC prism for the measurement of step heights

Stages and accessories (41)

Square stages

Item has been added to the configuration

Specimen stage 232x230 mm with hardcoat anodized surface

Recover

Item no.: 432037-9000-000

Specimen stage 232x230 mm with hardcoat anodized surface

Item Number: 432037-9000-000

Specimen stage 232x230 mm with hardcoat anodized surface - Object guide M mountable on both sides

Specimen holders

Item has been added to the configuration

Mounting frame M for microtiter plates 96 positions

Recover

Item no.: 471746-0000-000

Mounting frame M for microtiter plates 96 positions

Item Number: 471746-0000-000

Mounting frame M for microtiter plates 96 positions with adhesive scales

Item has been added to the configuration

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Recover

Item no.: 471744-0000-000

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Item Number: 471744-0000-000

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Item has been added to the configuration

Mounting frame M for specimen slider 76x26

Recover

Item no.: 471719-0000-000

Mounting frame M for specimen slider 76x26

Item Number: 471719-0000-000

Mounting frame M for specimen slider 76x26

Item has been added to the configuration

Universal mounting frame M

Recover

Item no.: 471718-0000-000

Universal mounting frame M

Item Number: 471718-0000-000

Universal mounting frame M for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm)

Item has been added to the configuration

Universal mounting frame M-X

Recover

Item no.: 471717-0000-000

Universal mounting frame M-X

Item Number: 471717-0000-000

Universal mounting frame M-X for: - multitest dishes with foot print 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm

Item has been added to the configuration

Universal mounting frame K-X

Recover

Item no.: 451353-0000-000

Universal mounting frame K-X

Item Number: 451353-0000-000

Universal mounting frame K-X for: - multitest dishes with footprint 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame K

Recover

Item no.: 451352-0000-000

Universal mounting frame K

Item Number: 451352-0000-000

Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm

Item has been added to the configuration

Mounting frame K for reflected light, d=72mm

Recover

Item no.: 451344-0000-000

Mounting frame K for reflected light, d=72mm

Item Number: 451344-0000-000

Mounting frame K for reflected light, d=72mm frame size 160 x 110 mm

Item has been added to the configuration

Mounting Frame K for specimen slider 76x26 mm

Recover

Item no.: 451341-0000-000

Mounting Frame K for specimen slider 76x26 mm

Item Number: 451341-0000-000

Mounting Frame K for specimen slider 76x26 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame K-M

Recover

Item no.: 432341-9100-000

Universal mounting frame K-M

Item Number: 432341-9100-000

Universal mounting frame K-M for multiwell plates of different manufacturers. - Three adjustable clamping springs for adaption to different plate sizes - base frame for Click-In System - four silicone sealed channels for the lead- through of tubes or cables - CO2/O2 incubation with CO2-cover HM - foot print 125...127 mm x 83...86 mm

Item has been added to the configuration

Mounting frame K; low profile, for reflected light, d=72 mm

Recover

Item no.: 432334-9001-000

Mounting frame K; low profile, for reflected light, d=72 mm

Item Number: 432334-9001-000

Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm

Item has been added to the configuration

Mounting frame insert Flex M, slides and chambers

Recover

Item no.: 432333-9060-000

Mounting frame insert Flex M, slides and chambers

Item Number: 432333-9060-000

Mounting frame insert Flex M, slides and chambers - for object slides 76x26 mm - for chambers (ibidi® µ-SlideTM, Nunc® Lab-TekTM / Lab-TekTM II) - for insertion in Mounting frame Flex M

Item has been added to the configuration

Mounting frame insert Flex M, petridishes

Recover

Item no.: 432333-9050-000

Mounting frame insert Flex M, petridishes

Item Number: 432333-9050-000

Mounting frame insert Flex M, petridishes - for petridishes d=88 mm, 65 mm, 54 mm, 36 mm - for insertion in Mounting frame Flex M

Item has been added to the configuration

Mounting frame Flex M

Recover

Item no.: 432333-9030-000

Mounting frame Flex M

Item Number: 432333-9030-000

Mounting frame Flex M - for microwell plates, flasks and petridishes d=95 mm - for the mounting of Mounting frame inserts Flex M

Item has been added to the configuration

Mounting frame for steel specimen (D)

Recover

Item no.: 432322-9000-000

Mounting frame for steel specimen (D)

Item Number: 432322-9000-000

Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm

Item has been added to the configuration

Mounting frame M for plankton dishes, d=40 mm

Recover

Item no.: 419195-9026-000

Mounting frame M for plankton dishes, d=40 mm

Item Number: 419195-9026-000

Mounting frame M for plankton dishes, d=40 mm

Item has been added to the configuration

Heatable universal mounting frame M-H S1 (D)

Recover

Item no.: 411860-9086-000

Heatable universal mounting frame M-H S1 (D)

Item Number: 411860-9086-000

Heatable universal mounting frame M-H S1 (D) - for object traverser - with apertures d=35 mm and 30x10 mm - temperature range of room temperature up to +50°C

Item has been added to the configuration

Heatable universal mounting frame K-H-L S1 (D)

Recover

Item no.: 411860-9082-000

Heatable universal mounting frame K-H-L S1 (D)

Item Number: 411860-9082-000

Heatable universal mounting frame K-H-L S1 (D) - for mechanical stage or scanning stage - with aperture 47x21 mm (central) - for object slides and chamber slides (max. length 120 mm ; max. width 27 mm) - temperature range of room temperature up to +50°C

Item has been added to the configuration

Heatable universal mounting frame K-H S1 (D)

Recover

Item no.: 411860-9080-000

Heatable universal mounting frame K-H S1 (D)

Item Number: 411860-9080-000

Heatable universal mounting frame K-H S1 (D) - for mechanical stage or scanning stage - with apertures d=35 mm and 30x10 mm - for 35 mm and 60 mm petri dishes - temperature range of room temperature up to +50°C

Item has been added to the configuration

Universal mounting frame K-Duo

Recover

Item no.: 000000-1116-078

Universal mounting frame K-Duo

Item Number: 000000-1116-078

Universal mounting frame K-Duo for: - 2x Petri dishes dia. 28...56 mm - 1x Petri dish dia. 28...40 mm and 1x slide 76x26 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame M-Duo

Recover

Item no.: 000000-1116-077

Universal mounting frame M-Duo

Item Number: 000000-1116-077

Universal mounting frame M-Duo for: - 2x Petri dishes dia. 28...56 mm - 1x Petri dish dia. 28...40 mm and 1x slide 76x26 mm

Gliding stages

Item has been added to the configuration

Gliding stage Z with stage inserts d=24 and 48mm

Recover

Item no.: 471722-9902-000

Gliding stage Z with stage inserts d=24 and 48mm

Item Number: 471722-9902-000

Gliding stage Z with stage inserts d=24 and 48mm

Various stage accessories

Item has been added to the configuration

Stage insert, metal; D=72 mm Drop Shape

Recover

Item no.: 451328-9010-000

Stage insert, metal; D=72 mm Drop Shape

Item Number: 451328-9010-000

Stage insert, metal; D=72 mm Drop Shape Drop shape aperture (length/width): 20 mm / 10 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=23 mm

Recover

Item no.: 451328-9000-000

Stage insert, metal; D=72 mm, d=23 mm

Item Number: 451328-9000-000

Stage insert, metal; D=72 mm, d=23 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=20 mm

Recover

Item no.: 451327-9901-000

Stage insert, metal; D=72 mm, d=20 mm

Item Number: 451327-9901-000

Stage insert, metal; D=72 mm, d=20 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=10 mm

Recover

Item no.: 451326-9901-000

Stage insert, metal; D=72 mm, d=10 mm

Item Number: 451326-9901-000

Stage insert, metal; D=72 mm, d=10 mm

Item has been added to the configuration

Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Item has been added to the configuration

Stage insert, metal; D=115 mm, aperture d=30 m

Recover

Item no.: 432328-9060-000

Stage insert, metal; D=115 mm, aperture d=30 m

Item Number: 432328-9060-000

Stage insert, metal; D=115 mm, aperture d=30 m

Item has been added to the configuration

Stage insert, metal; D=115 mm, aperture d=25.4 mm

Recover

Item no.: 432328-9050-000

Stage insert, metal; D=115 mm, aperture d=25.4 mm

Item Number: 432328-9050-000

Stage insert, metal; D=115 mm, aperture d=25.4 mm

Item has been added to the configuration

Stage insert, metal; D=115 mm, aperture d=20 mm

Recover

Item no.: 432328-9040-000

Stage insert, metal; D=115 mm, aperture d=20 mm

Item Number: 432328-9040-000

Stage insert, metal; D=115 mm, aperture d=20 mm

Item has been added to the configuration

Stage insert, metal; D=115 mm, aperture d=10 mm

Recover

Item no.: 432328-9020-000

Stage insert, metal; D=115 mm, aperture d=10 mm

Item Number: 432328-9020-000

Stage insert, metal; D=115 mm, aperture d=10 mm

Rotary mechanical stages

Item has been added to the configuration

Glass insert 115 mm, d=50 mm

Recover

Item no.: 451228-4006-000

Glass insert 115 mm, d=50 mm

Item Number: 451228-4006-000

Glass insert 115 mm, d=50 mm

Item has been added to the configuration

Glass insert 115 mm, d=27 mm

Recover

Item no.: 451228-4002-000

Glass insert 115 mm, d=27 mm

Item Number: 451228-4002-000

Glass insert 115 mm, d=27 mm

Item has been added to the configuration

Glass insert 115 mm, d=10 mm

Recover

Item no.: 451228-4001-000

Glass insert 115 mm, d=10 mm

Item Number: 451228-4001-000

Glass insert 115 mm, d=10 mm

Object guides

Item has been added to the configuration

Object guide M 130x85 R/L for Axiovert

Recover

Item no.: 432333-9100-000

Object guide M 130x85 R/L for Axiovert

Item Number: 432333-9100-000

Object guide M 130x85 R/L for Axiovert - for Axiovert 5/7 and Axio Vert.A1 - for mounting frames M - mountable on both sides without tools

Heating stages

Item has been added to the configuration

Heating stage S1

Recover

Item no.: 432049-9000-000

Heating stage S1

Item Number: 432049-9000-000

Heating stage S1 - dimensions: 250x230x18 mm - temperature range of room temperature up to +50°C

Mechanical stages

Item has been added to the configuration

Mechanical stage 40x40 R/L, reflected light

Recover

Item no.: 432043-9010-000

Mechanical stage 40x40 R/L, reflected light

Item Number: 432043-9010-000

Mechanical stage 40x40 R/L, reflected light - for Axiovert 5/7 and Axio Vert.A1 - manual 3-plate mechanical stage - opening for stage inserts D=115 mm - max. 3 kg sample load

Item has been added to the configuration

Mechanical stage 130x85 R/L for Axiovert

Recover

Item no.: 432043-9000-000

Mechanical stage 130x85 R/L for Axiovert

Item Number: 432043-9000-000

Mechanical stage 130x85 R/L for Axiovert - for Axiovert 5 and Axio Vert.A1 - manual 3-plate mechanical stage - for mounting frames K 160 x 110 mm - max. 3 kg sample load

Scanning stages

Item has been added to the configuration

Scanning Stage 130x85 mot P; CAN (D)

Recover

Item no.: 432031-9902-000

Scanning Stage 130x85 mot P; CAN (D)

Item Number: 432031-9902-000

Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO

Object guides SF

Item has been added to the configuration

Object guide M 130x85 mm right, short stage drive (l= 120 mm) -SAF-

Recover

Item no.: 000000-1689-360

Object guide M 130x85 mm right, short stage drive (l= 120 mm) -SAF-

Item Number: 000000-1689-360

Object guide M 130x85 mm right, short stage drive (l= 120 mm) for fixed stages Axio Observer/Axiovert 200; object guide based on 1005-833

Tubes and accessories (10)

Binocular tubes

Item has been added to the configuration

Binocular tube 45°/23

Recover

Item no.: 425523-9000-000

Binocular tube 45°/23

Item Number: 425523-9000-000

Binocular tube 45°/23 - upright and unreversed image

Various tube accessories

Item has been added to the configuration

Module 5.0x for magnification changer

Recover

Item no.: 426137-9050-000

Module 5.0x for magnification changer

Item Number: 426137-9050-000

Module 5.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 4.0x for magnification changer

Recover

Item no.: 426137-9040-000

Module 4.0x for magnification changer

Item Number: 426137-9040-000

Module 4.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 2.5x for magnification changer

Recover

Item no.: 426137-9030-000

Module 2.5x for magnification changer

Item Number: 426137-9030-000

Module 2.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 1.6x for magnification changer

Recover

Item no.: 426137-9020-000

Module 1.6x for magnification changer

Item Number: 426137-9020-000

Module 1.6x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 0.5x for magnification changer

Recover

Item no.: 426137-9010-000

Module 0.5x for magnification changer

Item Number: 426137-9010-000

Module 0.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Magnification changer 4x, switchable 60N-60N

Recover

Item no.: 426137-9000-000

Magnification changer 4x, switchable 60N-60N

Item Number: 426137-9000-000

Magnification changer 4x, switchable 60N-60N for connection to 60N camera port, 4 switchable positions, adjustable stop, factor 1x already integrated, 3 empty positions for optional magnification modules

Binocular ergotubes

Item has been added to the configuration

Binocular ergotube 30-60°/23

Recover

Item no.: 425523-9040-000

Binocular ergotube 30-60°/23

Item Number: 425523-9040-000

Binocular ergotube 30-60°/23 - upright and unreversed image - continuous angle adjustment

Binocular phototubes

Item has been added to the configuration

Binocular phototube, 45°/23 (50:50)

Recover

Item no.: 425523-9030-000

Binocular phototube, 45°/23 (50:50)

Item Number: 425523-9030-000

Binocular phototube, 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N

Item has been added to the configuration

Binocular phototube, left port 45°/23 (50:50)

Recover

Item no.: 425523-9020-000

Binocular phototube, left port 45°/23 (50:50)

Item Number: 425523-9020-000

Binocular phototube, left port 45°/23 (50:50) - upright and unreversed image - camera port with interface 60N

Optovar systems (3)

Optovar modules

Item has been added to the configuration

Optovar module 2.5x ACR P&C for transmitted light

Recover

Item no.: 424936-0000-000

Optovar module 2.5x ACR P&C for transmitted light

Item Number: 424936-0000-000

Optovar module 2.5x ACR P&C for transmitted light

Item has been added to the configuration

Optovar module 1.6x ACR P&C for transmitted light

Recover

Item no.: 424935-0000-000

Optovar module 1.6x ACR P&C for transmitted light

Item Number: 424935-0000-000

Optovar module 1.6x ACR P&C for transmitted light

Item has been added to the configuration

Optovar module 1.25x ACR P&C for transmitted light

Recover

Item no.: 424934-0000-000

Optovar module 1.25x ACR P&C for transmitted light

Item Number: 424934-0000-000

Optovar module 1.25x ACR P&C for transmitted light

Filters (50)

Conversion filter

Item has been added to the configuration

Conversion filter 3200-5500K; d=25x2

Recover

Item no.: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item Number: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item has been added to the configuration

White-balance filter, d=25x1.5 mm

Recover

Item no.: 447810-9000-000

White-balance filter, d=25x1.5 mm

Item Number: 447810-9000-000

White-balance filter, d=25x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Item has been added to the configuration

Conversion filter 5700-3200 K, d=25 mm

Recover

Item no.: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm

Item Number: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

Conversion filter 5700-3200 K, d=32 mm

Recover

Item no.: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm

Item Number: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

White-balance filter, d=32x1.5 mm

Recover

Item no.: 000000-1155-789

White-balance filter, d=32x1.5 mm

Item Number: 000000-1155-789

White-balance filter, d=32x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Color filter

Item has been added to the configuration

Contrast-enhancing blue filter, d=32x2.75 mm

Recover

Item no.: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm

Item Number: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm for enhanced blue-red contrast, e.g. with HE stained slides

Item has been added to the configuration

Green filter, d=32x2 mm

Recover

Item no.: 000000-1374-896

Green filter, d=32x2 mm

Item Number: 000000-1374-896

Green filter, d=32x2 mm for contrast enhancement for phase contrast and b/w image recording

Neutral density filter

Item has been added to the configuration

Neutral-density filter 0.25; d=32x2

Recover

Item no.: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item Number: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item has been added to the configuration

Neutral-density filter 0.06, d=32x2

Recover

Item no.: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item Number: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item has been added to the configuration

Neutral-density filter 0.05 for condenser

Recover

Item no.: 424228-9060-000

Neutral-density filter 0.05 for condenser

Item Number: 424228-9060-000

Neutral-density filter 0.05 for condenser - for the use at transmitted-light brightfield with alternating Ph, PlasDIC, iHMC - to be inserted into free position of LD condensers with modulator disk

Fluorescence filter set pix

Item has been added to the configuration

Filter Set 112 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489112-9110-400

Filter Set 112 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489112-9110-400

Filter Set 112 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 112 HE LED shift free for use with Colibri 7 with excitation wavelengths 385, 475, 555, 630 and 735 nm. Consisting of filters PFT 405 + 493 + 575 + 654 + 761 and PBP 425/30 + 514/31 + 592/25 + 681/45 + 785/38 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 110 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489110-9111-400

Filter Set 110 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489110-9111-400

Filter Set 110 HE LED with Reflector Module FL EC P & C (E) Filter Set 110 HE LED shift free for use with Colibri 7 with excitation wavelengths 385, 475, 590 and 735 nm. Consisting of filters QFT 405 + 493 + 611 + 762 and QBP 425/30 + 524/51 + 634/38 + 785/38 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 109 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489109-9110-400

Filter Set 109 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489109-9110-400

Filter Set 109 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 109 HE LED shift free for use with Colibri 5/7 with excitation wavelengths 385, 475 and 555 nm. Consisting of filters TBS 405 + 493 + 575 and TBP 425/29 + 514/31 + 632/100 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 108 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489108-9110-400

Filter Set 108 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489108-9110-400

Filter Set 108 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 108 HE LED shift free for use with Colibri 7 with excitation wavelengths 425 and 510 nm. Consisting of filters DFT 450 + 538 and DBP 467/24 + 598/110 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 96 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489096-9100-400

Filter Set 96 HE with Reflector Module FL EC P&C (E)

Item Number: 489096-9100-400

Filter Set 96 HE with Reflector Module FL EC P&C (E) Filter Set 96 HE shift free consisting of filters EX BP 390/40, BS FT 420, EM BP 450/40 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 92 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489092-9110-400

Filter Set 92 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489092-9110-400

Filter Set 92 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 92 HE LED shift free for use with Colibri 7 with excitation wavelengths 385, 475 and 590 nm. Consisting of filters TFT 405 + 493 + 610 and TBP 425/30 + 524/50 + 688/145 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 91 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489091-9110-400

Filter Set 91 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489091-9110-400

Filter Set 91 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 91 HE LED shift free for use with Colibri 7 with excitation wavelengths 430, 511 and 590 nm. Consisting of filters TFT 450 + 538 + 610 and TBP 467/24 + 555/25 + 687/145 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 90 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489090-9110-400

Filter Set 90 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489090-9110-400

Filter Set 90 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE LED shift free for use with Colibri 3/5/7 with excitation wavelengths 385, 475, 555 and 630 nm. Consisting of filters QBS 405 + 493 + 575 + 653 and QBP 425/30 + 514/30 + 592/25 + 709/100 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 90 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489090-9100-400

Filter Set 90 HE with Reflector Module FL EC P&C (E)

Item Number: 489090-9100-400

Filter Set 90 HE with Reflector Module FL EC P<(>&<)>C (E) Filter Set 90 HE shift free for excitation with multi spectral light sources, consisting of EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100 BS and EM inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 70 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489070-0000-400

Filter Set 70 HE with Reflector Module FL EC P&C (E)

Item Number: 489070-0000-400

Filter Set 70 HE with Reflector Module FL EC P&C (E) Filter Set 70 HE shift free consisting of filters EX BP 430/60, BS FT 500, EM BP 550/100 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 64 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489064-0000-400

Filter Set 64 HE with Reflector Module FL EC P&C (E)

Item Number: 489064-0000-400

Filter Set 64 HE with Reflector Module FL EC P&C (E) Filter Set 64 HE shift free consisting of filters EX BP 587/25, BS FT 605, EM BP 647/70 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 63 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489063-0000-400

Filter Set 63 HE with Reflector Module FL EC P&C (E)

Item Number: 489063-0000-400

Filter Set 63 HE with Reflector Module FL EC P&C (E) Filter Set 63 HE shift free consisting of filters EX BP 572/25, BS FT 590, EM BP 629/62 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 56 HE LED with Reflector Module FL EC P&C (E)

Recover

Item no.: 489056-9110-400

Filter Set 56 HE LED with Reflector Module FL EC P&C (E)

Item Number: 489056-9110-400

Filter Set 56 HE LED with Reflector Module FL EC P<(>&<)>C (E) Filter Set 56 HE LED shift free for use with Colibri 3/5/7 with excitation wavelengths 475 and 555 nm. Consisting of filters DFT 490 + 575 and DBP 512/30 + 630/98 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 47 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489047-9901-400

Filter Set 47 HE with Reflector Module FL EC P&C (E)

Item Number: 489047-9901-400

Filter Set 47 HE with Reflector Module FL EC P&C (E) Filter Set 47 HE shift free consisting of filters EX BP 436/25, BS FT 455, EM BP 480/40 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 46 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489046-9901-400

Filter Set 46 HE with Reflector Module FL EC P&C (E)

Item Number: 489046-9901-400

Filter Set 46 HE with Reflector Module FL EC P&C (E) Filter Set 46 HE shift free consisting of filters EX BP 500/25, BS FT 515, EM BP 535/30 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 43 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489043-9901-400

Filter Set 43 HE with Reflector Module FL EC P&C (E)

Item Number: 489043-9901-400

Filter Set 43 HE with Reflector Module FL EC P&C (E) Filter Set 43 HE shift free consisting of filters EX BP 550/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 38 HE with Reflector Module FL EC P&C (E)

Recover

Item no.: 489038-9901-400

Filter Set 38 HE with Reflector Module FL EC P&C (E)

Item Number: 489038-9901-400

Filter Set 38 HE with Reflector Module FL EC P&C (E) Filter Set 38 HE shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 71 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488071-0000-400

Filter Set 71 with Reflector Module FL EC P&C (E)

Item Number: 488071-0000-400

Filter Set 71 with Reflector Module FL EC P<(>&<)>C (E) Filter Set 71 shift free consisting of filters EX BP 592/24, BS FT 615, EM BP 675/100 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 50 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488050-9901-400

Filter Set 50 with Reflector Module FL EC P&C (E)

Item Number: 488050-9901-400

Filter Set 50 with Reflector Module FL EC P&C (E) Filter Set 50 shift free consisting of filters EX BP 640/30, BS FT 660, EM BP 690/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 49 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488049-9901-400

Filter Set 49 with Reflector Module FL EC P&C (E)

Item Number: 488049-9901-400

Filter Set 49 with Reflector Module FL EC P&C (E) Filter Set 49 shift free consisting of filters EX G 365, BS FT 395, EM BP 445/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 47 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488047-9100-400

Filter Set 47 with Reflector Module FL EC P&C (E)

Item Number: 488047-9100-400

Filter Set 47 with Reflector Module FL EC P&C (E) Filter Set 47 shift free consisting of filters EX BP 436/20, BS FT 455, EM BP 480/40 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 45 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488045-9100-400

Filter Set 45 with Reflector Module FL EC P&C (E)

Item Number: 488045-9100-400

Filter Set 45 with Reflector Module FL EC P&C (E) Filter Set 45 shift free consisting of filters EX BP 560/40, BS FT 585, EM BP 630/75 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 44 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488044-9100-400

Filter Set 44 with Reflector Module FL EC P&C (E)

Item Number: 488044-9100-400

Filter Set 44 with Reflector Module FL EC P&C (E) Filter Set 44 shift free consisting of filters EX BP 475/40, BS FT 500, EM BP 530/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 43 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488043-9100-400

Filter Set 43 with Reflector Module FL EC P&C (E)

Item Number: 488043-9100-400

Filter Set 43 with Reflector Module FL EC P&C (E) Filter Set 43 shift free consisting of filters EX BP 545/25, BS FT 570, EM BP 605/70 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 38 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488038-9100-400

Filter Set 38 with Reflector Module FL EC P&C (E)

Item Number: 488038-9100-400

Filter Set 38 with Reflector Module FL EC P&C (E) Filter Set 38 shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 31 with Reflector Module FL EC P&C (E)

Recover

Item no.: 488031-9100-400

Filter Set 31 with Reflector Module FL EC P&C (E)

Item Number: 488031-9100-400

Filter Set 31 with Reflector Module FL EC P&C (E) Filter Set 31 shift free consisting of filters EX BP 565/30, BS FT 585, EM BP 620/60 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 25 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488025-0000-400

Filter Set 25 with Reflector Module FL EC P&C (F)

Item Number: 488025-0000-400

Filter Set 25 with Reflector Module FL EC P&C (F) Filter Set 25 shift free consisting of filters EX TBP 400+495+570, BS FT 410+505+585, EM TBP 460+530+625 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 20 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488020-9901-400

Filter Set 20 with Reflector Module FL EC P&C (F)

Item Number: 488020-9901-400

Filter Set 20 with Reflector Module FL EC P&C (F) Filter Set 20 shift free consisting of filters EX BP 546/12, BS FT 560, EM BP 608/65 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 15 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488015-0000-400

Filter Set 15 with Reflector Module FL EC P&C (F)

Item Number: 488015-0000-400

Filter Set 15 with Reflector Module FL EC P&C (F) Filter Set 15 shift free consisting of filters EX BP 546/12, BS FT 580, EM LP 590 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 14 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488014-0000-400

Filter Set 14 with Reflector Module FL EC P&C (F)

Item Number: 488014-0000-400

Filter Set 14 with Reflector Module FL EC P&C (F) Filter Set 14 shift free consisting of filters EX BP 535/50, BS FT 580, EM LP 590 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 10 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488010-9901-400

Filter Set 10 with Reflector Module FL EC P&C (F)

Item Number: 488010-9901-400

Filter Set 10 with Reflector Module FL EC P&C (F) Filter Set 10 shift free consisting of filters EX BP 470/40, BS FT 510, EM BP 540/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 09 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488009-9901-400

Filter Set 09 with Reflector Module FL EC P&C (F)

Item Number: 488009-9901-400

Filter Set 09 with Reflector Module FL EC P&C (F) Filter Set 09 shift free consisting of filters EX BP 470/40, BS FT 510, EM LP 515 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 02 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488002-9901-400

Filter Set 02 with Reflector Module FL EC P&C (F)

Item Number: 488002-9901-400

Filter Set 02 with Reflector Module FL EC P&C (F) Filter Set 02 shift free consisting of filters EX G 365, BS FT 395, EM LP 420 inserted in reflector module, reflection avoided through tilted mount for emission filters

Item has been added to the configuration

Filter Set 01 with Reflector Module FL EC P&C (F)

Recover

Item no.: 488001-9901-400

Filter Set 01 with Reflector Module FL EC P&C (F)

Item Number: 488001-9901-400

Filter Set 01 with Reflector Module FL EC P&C (F) Filter Set 01 shift free consisting of filters EX BP 365/12, BS FT 395, EM LP 397 inserted in reflector module, reflection avoided through tilted mount for emission filters

Heat-reflecting filter

Item has been added to the configuration

Heat protection filter KG 1, d=32x2

Recover

Item no.: 467830-0000-000

Heat protection filter KG 1, d=32x2

Item Number: 467830-0000-000

Heat protection filter KG 1, d=32x2

Interference filter

Item has been added to the configuration

Interference wide-band filter green, d=32x4

Recover

Item no.: 467803-0000-000

Interference wide-band filter green, d=32x4

Item Number: 467803-0000-000

Interference wide-band filter green, d=32x4

Item has been added to the configuration

IF green filter, d=25x4

Recover

Item no.: 447805-9901-000

IF green filter, d=25x4

Item Number: 447805-9901-000

IF green filter, d=25x4

Gray filter

Item has been added to the configuration

Grey filter 0.25, d=25x2

Recover

Item no.: 447836-0000-000

Grey filter 0.25, d=25x2

Item Number: 447836-0000-000

Grey filter 0.25, d=25x2

Item has been added to the configuration

Grey filter 0.06, d=25x2

Recover

Item no.: 447835-0000-000

Grey filter 0.06, d=25x2

Item Number: 447835-0000-000

Grey filter 0.06, d=25x2

LP longpass filter

Item has been added to the configuration

IF yellow filter LP 515 dia. 25x2mm

Recover

Item no.: 447743-0000-000

IF yellow filter LP 515 dia. 25x2mm

Item Number: 447743-0000-000

IF yellow filter LP 515 dia. 25x2mm

Photomicrography (4)

T2 adapter

Item has been added to the configuration

T2-adapter for Canon EOS (EF Bayonet)

Recover

Item no.: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item Number: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item has been added to the configuration

T2-adapter for Minolta (Autofocus)

Recover

Item no.: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item Number: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item has been added to the configuration

T2-adapter for Contax (Contax-Bayonet)

Recover

Item no.: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item Number: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item has been added to the configuration

T2-adapter for Nikon F (F-Bayonet)

Recover

Item no.: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Item Number: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Video devices (13)

Other video adapters

Item has been added to the configuration

Double adapter 60N - 2x 60N with slider mount

Recover

Item no.: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount

Item Number: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount - slider mount for slider with 100% mirror or slider with beam splitter mount - 2 clickstop positions - mount for filters d=25 mm on both exits alternatively required: - slider with 100% mirror or - slider with beam splitter mount and 50:50 beam splitter or other beam splitters with dimensions 26x36 mm

Item has been added to the configuration

Slider with beam splitter mount for double adapter

Recover

Item no.: 426141-9021-000

Slider with beam splitter mount for double adapter

Item Number: 426141-9021-000

Slider with beam splitter mount for double adapter - 2 clickstop positions for exit straight / lateral - mount for beam splitter 26x36 mm

Item has been added to the configuration

Slider with 100% mirror for double adapter

Recover

Item no.: 426141-9011-000

Slider with 100% mirror for double adapter

Item Number: 426141-9011-000

Slider with 100% mirror for double adapter - 2 clickstop positions for exit straight / lateral

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter T2-T2 SLR 2.5x

Recover

Item no.: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item Number: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item has been added to the configuration

Camera Adapter T2-T2 DSLR 1.6x

Recover

Item no.: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item Number: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Measuring and counting components (5)

Microscope slide, calibratable

Item has been added to the configuration

Calibration Slide Universal CG=0

Recover

Item no.: 474029-9011-000

Calibration Slide Universal CG=0

Item Number: 474029-9011-000

Calibration Slide Universal CG=0 Calibration Slide Universal CG=0 without coverslip; positive version - high-precision object relocation - position of reference mark relative to left and upper slide border X=38mm/Y=13mm, +/- 5µm - line with 50mm length to control parallelism - Stage micrometer functionality Micro and Stemi: 5 lines with 1mm intervals in y-direction 100 lines with 1/100mm intervals in y-direction 25 lines with 1mm intervals in x-direction 50 lines with 1/10mm intervals in x-direction - circle areas with diameter 2.5/1.0/0.5/0.1/0.05/0.01mm - concentrical retangles 8x6/4x3/2x1.5/1x0.75mm

Object micrometer A (custom-made)

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Recover

Item no.: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Item Number: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer A

Item has been added to the configuration

Stage micrometer for reflected light 5 + 100/100y d=0mm

Recover

Item no.: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm

Item Number: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

D SF objective lens micrometer

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Recover

Item no.: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Item Number: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated - with cover slip d=0.16 mm - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Eyepieces (12)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444232-9910-000

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Item Number: 444232-9910-000

Eyepiece E-PL 10x/20 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br.foc.

Recover

Item no.: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item Number: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item has been added to the configuration

Eyepiece PL 10x/21 Br. foc.

Recover

Item no.: 444039-9000-000

Eyepiece PL 10x/21 Br. foc.

Item Number: 444039-9000-000

Eyepiece PL 10x/21 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with net micrometer

Recover

Item no.: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item Number: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Recover

Item no.: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item Number: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item Number: 444036-9040-000

Eyepiece PL 10x/23 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Auxiliary microscopes

Item has been added to the configuration

Auxiliary microscope, d=30

Recover

Item no.: 444830-9902-000

Auxiliary microscope, d=30

Item Number: 444830-9902-000

Auxiliary microscope, d=30 to adjust the phase rings and darkfield stop in the condenser

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Recover

Item no.: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item Number: 444054-9010-000

Eyepiece PL 16x/16 Br. foc. with Crossline Micrometer 10:100

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Eyepiece accessories (6)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Structure comparison disk single grains (I), d=26 mm

Recover

Item no.: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Item Number: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Stops (D)

Item has been added to the configuration

Pinhole diaphragm, d=30mm

Recover

Item no.: 444020-0000-000

Pinhole diaphragm, d=30mm

Item Number: 444020-0000-000

Pinhole diaphragm, d=30mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Transmitted-light objectives (57)

A-Plan LD Phase Contrast

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 Ph2 M27

Recover

Item no.: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27

Item Number: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27

Recover

Item no.: 421261-9931-710

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27

Item Number: 421261-9931-710

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene) for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 iHMC M27

Recover

Item no.: 421261-9931-000

Objective LD A-Plan 40x/0.55 iHMC M27

Item Number: 421261-9931-000

Objective LD A-Plan 40x/0.55 iHMC M27 (FWD=2.3mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph2 M27

Recover

Item no.: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27

Item Number: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27

Recover

Item no.: 421261-9917-710

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27

Item Number: 421261-9917-710

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph1 M27

Recover

Item no.: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27

Item Number: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph2 M27

Recover

Item no.: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27

Item Number: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1- M27

Recover

Item no.: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27

Item Number: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1 M27

Recover

Item no.: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27

Item Number: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 iHMC M27

Recover

Item no.: 421241-9930-000

Objective LD A-Plan 10x/0.25 iHMC M27

Item Number: 421241-9930-000

Objective LD A-Plan 10x/0.25 iHMC M27 (FWD=8.4mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27

Item Number: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 Ph1 M27

Recover

Item no.: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27

Item Number: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)

Plan-Neofluar LD Phase Contrast

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Recover

Item no.: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Item Number: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Recover

Item no.: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Item Number: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Recover

Item no.: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Item Number: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Recover

Item no.: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Item Number: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Recover

Item no.: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Item Number: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Plan-Neofluar LD BrightField

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Recover

Item no.: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Item Number: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27

Recover

Item no.: 421369-9900-000

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27

Item Number: 421369-9900-000

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27 (FWD=2.0mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Recover

Item no.: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Item Number: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Recover

Item no.: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Item Number: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

A-Plan LD BrightField

Item has been added to the configuration

Objective LD A-Plan 63x0.65 iHMC M27

Recover

Item no.: 421281-9930-000

Objective LD A-Plan 63x0.65 iHMC M27

Item Number: 421281-9930-000

Objective LD A-Plan 63x0.65 iHMC M27 (FWD=1.8mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 for Thermo Plate M27

Recover

Item no.: 421280-9900-710

Objective LD A-Plan 63x/0.65 for Thermo Plate M27

Item Number: 421280-9900-710

Objective LD A-Plan 63x/0.65 for Thermo Plate M27 (FWD=1.1mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 M27

Recover

Item no.: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27

Item Number: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 for Thermo Plate M27

Recover

Item no.: 421260-9906-710

Objective LD A-Plan 40x/0.55 for Thermo Plate M27

Item Number: 421260-9906-710

Objective LD A-Plan 40x/0.55 for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 M27

Recover

Item no.: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27

Item Number: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 iHMC M27

Recover

Item no.: 421251-9931-000

Objective LD A-Plan 20x/0.35 iHMC M27

Item Number: 421251-9931-000

Objective LD A-Plan 20x/0.35 iHMC M27 (FWD=4.9mm at CG=1mm polystyrene), suitable for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 M27

Recover

Item no.: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27

Item Number: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 M27

Recover

Item no.: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27

Item Number: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 M27

Recover

Item no.: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27

Item Number: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27 (FWD=11.7mm at CG=1mm polystyrene)

A-Plan Phase Contrast

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27

Item Number: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph2 M27

Recover

Item no.: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27

Item Number: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27

Item Number: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27 (FWD=4.3mm)

A-Plan BrightField

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil M27

Recover

Item no.: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27

Item Number: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/0.8 M27

Recover

Item no.: 421090-9800-000

Objective A-Plan 100x/0.8 M27

Item Number: 421090-9800-000

Objective A-Plan 100x/0.8 M27 (FWD=0.97mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 M27

Recover

Item no.: 421040-9900-000

Objective A-Plan 10x/0.25 M27

Item Number: 421040-9900-000

Objective A-Plan 10x/0.25 M27 (FWD=4.5mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 M27

Recover

Item no.: 421030-9900-000

Objective A-Plan 5x/0.12 M27

Item Number: 421030-9900-000

Objective A-Plan 5x/0.12 M27 (FWD=10.1mm)

Item has been added to the configuration

Objective A-Plan 2.5x/0.06 M27

Recover

Item no.: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27

Item Number: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27 (FWD=10.4mm)

Achroplan Phase Contrast

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Item Number: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 Ph1 M27

Recover

Item no.: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27

Item Number: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 Ph1 M27

Recover

Item no.: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27

Item Number: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27 (FWD=12.0mm)

Achroplan BrightField

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil M27

Recover

Item no.: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27

Item Number: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 M27

Recover

Item no.: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27

Item Number: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27 (FWD=12.0mm)

Item has been added to the configuration

Objective N-Achroplan 2.5x/0.07 M27

Recover

Item no.: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27

Item Number: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27 (FWD=9.8mm)

Plan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Recover

Item no.: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Item Number: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Recover

Item no.: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Item Number: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27 (FWD=5.2mm)

Plan-Neofluar Phase Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Recover

Item no.: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Item Number: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Recover

Item no.: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Item Number: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Recover

Item no.: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Item Number: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Recover

Item no.: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Item Number: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Recover

Item no.: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Item Number: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27 (FWD=18.5mm)

Plan-Neofluar BrightField

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Recover

Item no.: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Item Number: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 M27

Recover

Item no.: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27

Item Number: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 M27

Recover

Item no.: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27

Item Number: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 M27

Recover

Item no.: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27

Item Number: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 M27

Recover

Item no.: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27

Item Number: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 2.5x/0.085 M27

Recover

Item no.: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27

Item Number: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27 (FWD=8.8mm)

Reflected-light objectives (47)

Epiplan LD BrightField

Item has been added to the configuration

Objective LD Epiplan 20x/0.4 M27

Recover

Item no.: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27

Item Number: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27 (CG=0mm with or CG=1.5mm without coverglass cap) (FWD=7.2mm at D=0mm)

Epiplan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Recover

Item no.: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Item Number: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27 (FWD=0.37mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Recover

Item no.: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Item Number: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27

Recover

Item no.: 422373-9900-000

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27

Item Number: 422373-9900-000

Objective EC Epiplan-Neofluar 50x/1.0 Oil Pol M27 (FWD=0.40mm), incl. Immersol M, oiler 20ml

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Recover

Item no.: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Item Number: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Recover

Item no.: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Item Number: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Recover

Item no.: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Item Number: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Recover

Item no.: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Item Number: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Recover

Item no.: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Item Number: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27 (FWD=15.8mm)

Epiplan-Neofluar LD BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Recover

Item no.: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Item Number: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27 (FWD=4.1mm)

Epiplan-Neofluar LD DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Recover

Item no.: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Item Number: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27 (FWD=4.0mm)

Epiplan-Neofluar BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Recover

Item no.: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Item Number: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Recover

Item no.: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Item Number: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27 (FWD=12.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Recover

Item no.: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Item Number: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Recover

Item no.: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Item Number: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Recover

Item no.: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Item Number: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Recover

Item no.: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Item Number: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Recover

Item no.: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Item Number: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm)

Epiplan-Neofluar DIC

Item has been added to the configuration

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Recover

Item no.: 422472-9900-000

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Item Number: 422472-9900-000

Objective LD EC Epiplan-Neofluar 50x/0.55 DIC M27 (FWD=9.1mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Recover

Item no.: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Item Number: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27 (FWD=12.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Recover

Item no.: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Item Number: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Recover

Item no.: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Item Number: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Recover

Item no.: 422342-9900-000

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Item Number: 422342-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 DIC M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Recover

Item no.: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Item Number: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Recover

Item no.: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Item Number: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27 (FWD=15.8mm)

Epiplan-Neofluar BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Recover

Item no.: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Item Number: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Recover

Item no.: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Item Number: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Recover

Item no.: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Item Number: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Recover

Item no.: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Item Number: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27 (FWD=9mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Recover

Item no.: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Item Number: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27 (FWD=14.5mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Recover

Item no.: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Item Number: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm)

Epiplan-Neofluar BrightField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Recover

Item no.: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Item Number: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Item Number: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Epiplan BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 BD M27

Recover

Item no.: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27

Item Number: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 BD M27

Recover

Item no.: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27

Item Number: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 BD M27

Recover

Item no.: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27

Item Number: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 BD M27

Recover

Item no.: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27

Item Number: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 BD M27

Recover

Item no.: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27

Item Number: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 BD M27

Recover

Item no.: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27

Item Number: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27 (FWD=11.8mm)

Epiplan BrightField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 M27

Recover

Item no.: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27

Item Number: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 M27

Recover

Item no.: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27

Item Number: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 M27

Recover

Item no.: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27

Item Number: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 M27

Recover

Item no.: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27

Item Number: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 M27

Recover

Item no.: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27

Item Number: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 M27

Recover

Item no.: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27

Item Number: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm)

Epiplan Polarization Contrast

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 Pol M27

Recover

Item no.: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27

Item Number: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 Pol M27

Recover

Item no.: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27

Item Number: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27 (FWD=11.0mm)

Immersion oils (11)

Glycerin immersion

Item has been added to the configuration

Immersion medium Immersol G, oiler 20 ml

Recover

Item no.: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml

Item Number: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml ne = 1.456 (23 °C) ve = 58 Glycerine immersion for fluorescence microscopy

Immersion oil F

Item has been added to the configuration

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml

Recover

Item no.: 444970-9010-000

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml

Item Number: 444970-9010-000

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml (ISO 8036-1/2, ne=1.518 (37°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml

Recover

Item no.: 444970-9000-000

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml

Item Number: 444970-9000-000

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml (ISO 8036-1/2, ne=1.518 (30°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Recover

Item no.: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Item Number: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml

Recover

Item no.: 444960-0000-000

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml

Item Number: 444960-0000-000

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Immersion oil W

Item has been added to the configuration

Immersion medium Immersol W 2010, oiler 20 ml

Recover

Item no.: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml

Item Number: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml ne=1.3339 (23°C) for water immersion

Other immersion oils

Item has been added to the configuration

Immersion oil Immersol M, bottle 100 ml

Recover

Item no.: 444966-0000-000

Immersion oil Immersol M, bottle 100 ml

Item Number: 444966-0000-000

Immersion oil Immersol M, bottle 100 ml (ISO 8036, DIN 58 884, ne=1.518 (23°C))

Item has been added to the configuration

Immersion oil Immersol M, oiler 20 ml

Recover

Item no.: 444965-0000-000

Immersion oil Immersol M, oiler 20 ml

Item Number: 444965-0000-000

Immersion oil Immersol M, oiler 20 ml (ISO 8036, DIN 58 884, ne=1.518 (23°C))

Immersion oil N

Item has been added to the configuration

Immersion oil Immersol 518 N, bottle 500 ml

Recover

Item no.: 000000-1111-809

Immersion oil Immersol 518 N, bottle 500 ml

Item Number: 000000-1111-809

Immersion oil Immersol 518 N, bottle 500 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 N, bottle 100 ml

Recover

Item no.: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml

Item Number: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 N, oiler 20 ml

Recover

Item no.: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml

Item Number: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Accessories for objectives (5)

Microscope slides, various accessories

Item has been added to the configuration

Metallurgical levelling press

Recover

Item no.: 478962-0000-000

Metallurgical levelling press

Item Number: 478962-0000-000

Metallurgical levelling press

Cover slip caps

Item has been added to the configuration

Coverglass cap for D=0.17mm

Recover

Item no.: 422904-9001-000

Coverglass cap for D=0.17mm

Item Number: 422904-9001-000

Coverglass cap for D=0.17mm for objectives LD A-Plan 10x/0.25, 20x/0.35, 32x/0.45, 40x/0.55 and 63x/0.65, if samples with cover glass 0.17 mm shall be observed

Antiflex caps

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Recover

Item no.: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item Number: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Recover

Item no.: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Item Number: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Intermediate rings

Item has been added to the configuration

Adapter M 27x0.75 / W 0.8 H "0"

Recover

Item no.: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Item Number: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Condensers (27)

Condenser, LD

Item has been added to the configuration

LD condenser 0.55 for H Ph PlasDIC DIC

Recover

Item no.: 424228-9030-000

LD condenser 0.55 for H Ph PlasDIC DIC

Item Number: 424228-9030-000

LD condenser 0.55 for H Ph PlasDIC DIC - 5-position modulator disk, freely configurable - centerable positions, position 1 with aperture stop - for objectives 5x - 100x - variable working distance from 30 to 38 mm

Item has been added to the configuration

LD condenser 0.4 for slider

Recover

Item no.: 424228-9020-000

LD condenser 0.4 for slider

Item Number: 424228-9020-000

LD condenser 0.4 for slider - for H, Ph, PlasDIC - rotatable, with click stops 0°, 90°, 180°, 270° - for objectives 5x - 63x (2.5x with diffusion disk 2.5x) - 10x46 mm slider mount - 53 mm working distance - aperture stop

Item has been added to the configuration

LD condenser 0.4 for H Ph PlasDIC DIC iHMC

Recover

Item no.: 424228-9010-000

LD condenser 0.4 for H Ph PlasDIC DIC iHMC

Item Number: 424228-9010-000

LD condenser 0.4 for H Ph PlasDIC DIC iHMC - 5-position modulator disk, freely configurable - centerable positions, position 1 with aperture stop - for objectives 5x - 63x (2.5x with diffusion disk 2.5x) - 10x46 mm slider mount - 53 mm working distance

Item has been added to the configuration

LD condenser 0.3 for slider

Recover

Item no.: 424228-9000-000

LD condenser 0.3 for slider

Item Number: 424228-9000-000

LD condenser 0.3 for slider - for H, Ph, PlasDIC - rotatable, with click stops 0°, 90°, 180°, 270° - for objectives 2.5x - 40x (1.25x with diffusion disk 1.25x) - 10x46 mm slider mount - 72 mm working distance - aperture stop

Stop slider

Item has been added to the configuration

3 position contrast slider 10x29 mm for PlasDIC module and analyzer

Recover

Item no.: 426980-9050-000

3 position contrast slider 10x29 mm for PlasDIC module and analyzer

Item Number: 426980-9050-000

3 position contrast slider 10x29 mm for PlasDIC module and analyzer

Item has been added to the configuration

Slider 10x46 mm with fixed phase stop Ph 1/0.3

Recover

Item no.: 426717-9030-000

Slider 10x46 mm with fixed phase stop Ph 1/0.3

Item Number: 426717-9030-000

Slider 10x46 mm with fixed phase stop Ph 1/0.3

Item has been added to the configuration

Slider 10x46 mm with fixed phase stop Ph 1/0.4

Recover

Item no.: 426717-9020-000

Slider 10x46 mm with fixed phase stop Ph 1/0.4

Item Number: 426717-9020-000

Slider 10x46 mm with fixed phase stop Ph 1/0.4

Item has been added to the configuration

Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC

Recover

Item no.: 426717-9000-000

Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC

Item Number: 426717-9000-000

Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC - 2 positions for Ph- or PlasDIC diaphragms - brightfield position with neutral-density filter 0.06

Stops, PH, D, Varel

Item has been added to the configuration

Phase stop Ph 2/0.4 for slider

Recover

Item no.: 426717-9360-000

Phase stop Ph 2/0.4 for slider

Item Number: 426717-9360-000

Phase stop Ph 2/0.4 for slider

Item has been added to the configuration

Phase stop Ph 1/0.4 for slider

Recover

Item no.: 426717-9350-000

Phase stop Ph 1/0.4 for slider

Item Number: 426717-9350-000

Phase stop Ph 1/0.4 for slider

Item has been added to the configuration

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Recover

Item no.: 426717-9220-000

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Item Number: 426717-9220-000

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Item has been added to the configuration

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Recover

Item no.: 426717-9210-000

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Item Number: 426717-9210-000

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Item has been added to the configuration

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Recover

Item no.: 426717-9200-000

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Item Number: 426717-9200-000

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Item has been added to the configuration

Phase stop Ph 3/0.55 for condenser

Recover

Item no.: 426717-9190-000

Phase stop Ph 3/0.55 for condenser

Item Number: 426717-9190-000

Phase stop Ph 3/0.55 for condenser

Item has been added to the configuration

Phase stop Ph 2/0.55 for condenser

Recover

Item no.: 426717-9180-000

Phase stop Ph 2/0.55 for condenser

Item Number: 426717-9180-000

Phase stop Ph 2/0.55 for condenser

Item has been added to the configuration

Phase stop Ph 1/0.55 for condenser

Recover

Item no.: 426717-9170-000

Phase stop Ph 1/0.55 for condenser

Item Number: 426717-9170-000

Phase stop Ph 1/0.55 for condenser

Item has been added to the configuration

Phase stop Ph 2 0.35/0.4 for condenser

Recover

Item no.: 426717-9160-000

Phase stop Ph 2 0.35/0.4 for condenser

Item Number: 426717-9160-000

Phase stop Ph 2 0.35/0.4 for condenser

Item has been added to the configuration

Phase stop Ph 1 0.35/0.4 for condenser

Recover

Item no.: 426717-9150-000

Phase stop Ph 1 0.35/0.4 for condenser

Item Number: 426717-9150-000

Phase stop Ph 1 0.35/0.4 for condenser

Item has been added to the configuration

Phase stop Ph 2/0.3 for slider

Recover

Item no.: 426717-9140-000

Phase stop Ph 2/0.3 for slider

Item Number: 426717-9140-000

Phase stop Ph 2/0.3 for slider

Item has been added to the configuration

Phase stop Ph 1/0.3 for slider

Recover

Item no.: 426717-9130-000

Phase stop Ph 1/0.3 for slider

Item Number: 426717-9130-000

Phase stop Ph 1/0.3 for slider

Condenser module/prisms III

Item has been added to the configuration

Condenser module DIC III/0.55 with polarizer

Recover

Item no.: 426717-9270-000

Condenser module DIC III/0.55 with polarizer

Item Number: 426717-9270-000

Condenser module DIC III/0.55 with polarizer

Condenser module/prisms II

Item has been added to the configuration

Condenser module DIC II/0.55 with polarizer

Recover

Item no.: 426717-9260-000

Condenser module DIC II/0.55 with polarizer

Item Number: 426717-9260-000

Condenser module DIC II/0.55 with polarizer

Item has been added to the configuration

Condenser module DIC II/0.4 with polarizer

Recover

Item no.: 426717-9240-000

Condenser module DIC II/0.4 with polarizer

Item Number: 426717-9240-000

Condenser module DIC II/0.4 with polarizer

Condenser modules/prisms I

Item has been added to the configuration

Condenser module DIC I/0.55 with polarizer

Recover

Item no.: 426717-9250-000

Condenser module DIC I/0.55 with polarizer

Item Number: 426717-9250-000

Condenser module DIC I/0.55 with polarizer

Item has been added to the configuration

Condenser module DIC I/0.4 with polarizer

Recover

Item no.: 426717-9230-000

Condenser module DIC I/0.4 with polarizer

Item Number: 426717-9230-000

Condenser module DIC I/0.4 with polarizer

Various condenser accessories

Item has been added to the configuration

Diffusion disk 1.25x for condenser 0.3

Recover

Item no.: 424228-9050-000

Diffusion disk 1.25x for condenser 0.3

Item Number: 424228-9050-000

Diffusion disk 1.25x for condenser 0.3

Item has been added to the configuration

Diffusion disk 2.5x for condenser 0.4

Recover

Item no.: 424228-9040-000

Diffusion disk 2.5x for condenser 0.4

Item Number: 424228-9040-000

Diffusion disk 2.5x for condenser 0.4

Computer and accessories (4)

Various computer accessories

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language English US (O)

Recover

Item no.: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item Number: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item has been added to the configuration

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Recover

Item no.: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Item Number: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O) Cable, High-Speed-HDMI-Cable, Premium, Resolution 4K, HDMI connector A to HDMI connector A, black, 2m

Item has been added to the configuration

Mouse, Optical USB-Scroll Mouse (O)

Recover

Item no.: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item Number: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language German (O)

Recover

Item no.: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Item Number: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Connecting cables (2)

Illuminator cables

Item has been added to the configuration

Extension cable 6 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item Number: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item has been added to the configuration

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Control devices (1)

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Micromanipulation injection (12)

Facilities, Fa. Ibidi

Item has been added to the configuration

Gas Mixer System CO2/O2, ibidi (D)

Recover

Item no.: 433617-9070-000

Gas Mixer System CO2/O2, ibidi (D)

Item Number: 433617-9070-000

Gas Mixer System CO2/O2, ibidi® (D) For CO2/O2 control and humidification - Includes controller, humidifying column and humidity sensor to be mounted at Glass Lid CO2/O2 heated/unheated - Includes 2x 5m gas tubing (PUN-H) Software: - ibidi® IncuControl - CO2 regulation up to 15% - CO2: resolution 0.1%, precision +/- 0.35% at 5% CO2 - Humidity regulation: 20-99%, resolution 1%, precision +/- 5% - O2 regulation up 1% to 21% - O2: resolution 0.1°C, precision: +/- 0.2°C - no manual calibration required Connections: - Input channel for humidity sensor for feedback regulation - USB- and CAN connection - External power supply 100-240V / 50-60Hz / max. 1.4 A; Output: 24V DC / max. 5A, 120W - Dimensions controller: 170 mm x 230 mm x 90mm (W x D x H) - Dimensions humidifying column: 70 mm x 110 mm x 300 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH

Item has been added to the configuration

Gas Mixer System CO2, ibidi (D)

Recover

Item no.: 433617-9030-000

Gas Mixer System CO2, ibidi (D)

Item Number: 433617-9030-000

Gas Mixer System CO2, ibidi® (D) For CO2 control and humidification - Includes controller, humidifying column and humidity sensor to be mounted at Glass Lid CO2/O2 heated/unheated - Includes 2 x 5m gas tubing (PUN-H) - The Gas Mixer System requires pressured air (1 bar ) Software: - ibidi® IncuControl - CO2 regulation up to 15% - CO2: resolution 0.1%, precision +/- 0.35% at 5% CO2 - Humidity regulation: 20-99%, resolution 1%, precision +/- 5% - no manual calibration required Connections: - Input channel for humidity sensor for feedback regulation - USB- and CAN connection - External power supply 100-240V / 50-60Hz / max. 1.4 A; Output: 24V DC / max. A, 120W; with country specific plug - Dimensions controller: 170 mm x 230 mm x 90mm (W x D x H) - Dimensions humidifying column: 70 mm x 110 mm x 300 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH

Item has been added to the configuration

Temperature Controller, ibidi (D)

Recover

Item no.: 433617-9020-000

Temperature Controller, ibidi (D)

Item Number: 433617-9020-000

Temperature Controller, ibidi® (D) - For temperature control of up to 4 electrically heated components: Glass Lid CO2/O2 heated, ibidi® Heated Plate K with 3 inserts, ibidi® Heating Unit XL (PeCon) Objective heater (PeCon) -includes Temperature Adjustment Set: -Type K thermocouple and 3 dishes for temperature adjustment (µ-Dish 35 and 50 mm, µ-Slide 8 well) Connections: - Input channel for thermocouple to control sample temperature - USB and CAN connection Software: - ibidi® IncuControl Resolution. 0.1°C Precision: +/- 0.5°C Temperature Control Range: Channel 1 (Heated Lid): Ambient temperature (min. 18°C) to +46°C Channel 2 (Heated Plate): Ambient temperature (min. 18°C) to +45°C - incl. power supply 100-240V / 50 - 60Hz; Output: max. 2A; 24V DC / max. 6.67A 160W - Dimension: 230 mm x 170 mm x 90 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH

Item has been added to the configuration

Heated plate K with 3 inserts, ibidi (D)

Recover

Item no.: 433617-9010-000

Heated plate K with 3 inserts, ibidi (D)

Item Number: 433617-9010-000

Heated plate K with 3 inserts, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for mechanical and scanning stages with opening 160 x 110 mm - Including inserts for: - Slides and Chamber Slides (62...78 mm length to 26.5 mm width or 57...70 mm length to 27.5 mm width) - 35 mm Petri dishes (32 - 44 mm diameter, 9 - 14 mm height) - 60 mm Petri dishes (48 - 68 mm diameter, 9 - 14 mm height) - Temperature range: ambient to 45°C - Outer dimensions: 160 mm x 130 mm x 12 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH

Item has been added to the configuration

Glass Lid CO2/O2 heated, ibidi (D)

Recover

Item no.: 433617-9000-000

Glass Lid CO2/O2 heated, ibidi (D)

Item Number: 433617-9000-000

Glass Lid CO2/O2 heated, ibidi® (D) To be used with Temperature Controller, ibidi® - Suitable for ibidi® Heated Plate K with 3 inserts and ibidi® Mounting frame K for multiwell plates - Temperature range: ambient to 45°C - Compatible with DIC contrast - 4 openings for perfusion tubing (width 3 mm, height 7 mm) - Opening for humidity sensor (part of ibidi® Gas Mixer System) - Luer Lock Connector for heated gas tubing (ibidi® Gas Mixer System) - The Gasmixer System requires pressured air (1 bar) - Observation area: 142 mm x 70 mm - Outer dimensions: 160 mm x 110 mm x 19 mm (W x D x H) ibidi® is a registered trademark of the ibidi GmbH

Various manipulation and injection devices

Item has been added to the configuration

Mounting Frame K Thermo Plate with Controller (D)

Recover

Item no.: 411860-9093-000

Mounting Frame K Thermo Plate with Controller (D)

Item Number: 411860-9093-000

Mounting Frame K Thermo Plate with Controller (D) - glass plate made of toughened glass - glass thickness: 0.5 mm (over entire glass plate surface) - LED status report - controller with LCD display: temperature range: room temperature up to 50°C resolution: 0.1° C temperature accuracy: +/- 0.1°C 100V-240V AC/50-60Hz/max. 50VA - country specific power cable

PECON devices

Item has been added to the configuration

Heatable universal mounting frame K-H-R S1 (D)

Recover

Item no.: 411860-9081-000

Heatable universal mounting frame K-H-R S1 (D)

Item Number: 411860-9081-000

Heatable universal mounting frame K-H-R S1 (D) - for mechanical stage or scanning stage - with round aperture d=30 mm (central) - for 35 mm petri dishes - temperature range of room temperature up to +50°C

Item has been added to the configuration

TempModule S1 (D)

Recover

Item no.: 411860-9010-000

TempModule S1 (D)

Item Number: 411860-9010-000

TempModule S1 (D) - Basic stack module for the temperature control of up to 4 electrically heated S1 components - Power supply for further S1 modules - Eight allocatable parameter sets for control - Resolution: 0.1° C - Temperature accuracy: +/- 0.1°C - Temperature measuring channel for external calibration - CAN and USB connecting cables - 90V...260V AC/50...60Hz/max. 460VA - Country-specific line cable

Item has been added to the configuration

TempController 2000-2 (D)

Recover

Item no.: 411860-9005-000

TempController 2000-2 (D)

Item Number: 411860-9005-000

TempController 2000-2 (D) to control the temperature of up to 2 electrically heated S1 components - Temperature range: room temperature up to 60° C - Display of nominal and actual temperature of two channels - Internal resolution: 0.01° C - Temperature accuracy: +/- 0.1°C - 8 selectable parameter sets for the control - USB port for external temperature control - 90V...260V AC/50...60Hz/max. 200VA - country-specific power cable Dimensions (LxWxH): 280 x 200 x 130 mm

Narishige devices

Item has been added to the configuration

Microinjector IM-21, hydraulic (D)

Recover

Item no.: 411831-9080-000

Microinjector IM-21, hydraulic (D)

Item Number: 411831-9080-000

Microinjector IM-21, hydraulic (D) - Movement range 20 mm, full rotation of knob 500 µm / apprx. 10µl Use within the EU for research purposes only.

Item has been added to the configuration

Microinjector IM-11-2, pneumatic (D)

Recover

Item no.: 411831-9070-000

Microinjector IM-11-2, pneumatic (D)

Item Number: 411831-9070-000

Microinjector IM-11-2, pneumatic (D) - 40 mm plunger Use within the EU for research purposes only.

Item has been added to the configuration

Micromanipulator MTK-1-Z2 D)

Recover

Item no.: 411831-9010-000

Micromanipulator MTK-1-Z2 D)

Item Number: 411831-9010-000

Micromanipulator MTK-1-Z2, Axiovert (D) for Axio Vert.A1 and Axiovert 5 Hydraulic micromanipulator with 4-axis hanging joystick set including both handed manipulators and adapter for Axio Vert.A1 and Axiovert 5 Use within the EU for research purposes only Maximum movement range X/Y/Z-axis: 10 mm - Oil hydraulic control - Movement of 250 µm/rot. - Minimum graduation 5 µm Maximum movement range T-axis (for holder): 10 mm - Oil hydraulic control - Movement of 1,000 µm/rot. - Minimum graduation 20 µm - Manual mechanical (Return to Home position) 50 mm - Incident angle 15...40°

Image processing (64)

Camera accessories

Item has been added to the configuration

Wi-Fi adapter package (O)

Recover

Item no.: 426570-9110-000

Wi-Fi adapter package (O)

Item Number: 426570-9110-000

Wi-Fi adapter package (O) consisting of Wireless Network Adapter and USB Adapter USB Type-C to Type-A Technical specification: Frequency: 2.4 GHz Transmission: 400 Mbps Antenna: Built-in 2dBi Transmit power: 18 dBm Interface: USB 3.0 Standard: IEEE802.11a/b/g/n

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 color (D)

Recover

Item no.: 426560-9080-000

Microscopy Camera Axiocam 712 color (D)

Item Number: 426560-9080-000

Microscopy Camera Axiocam 712 color (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 2048 x 1504 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Adjustable color saturation White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x 1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.1 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)>0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 mono R2 (D)

Recover

Item no.: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D)

Item Number: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 color R2 (D)

Recover

Item no.: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D)

Item Number: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono R2 (D)

Recover

Item no.: 426560-9041-000

Microscopy Camera Axiocam 305 mono R2 (D)

Item Number: 426560-9041-000

Microscopy Camera Axiocam 305 mono R2 (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H xV Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperaturestable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Digital Microscopy Camera Axiocam 305 color R2 (D)

Recover

Item no.: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D)

Item Number: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 702 mono (D)

Recover

Item no.: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D)

Item Number: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D) High performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1920 (H) x 1216 (V) = 2.3 Mega Pixels Pixel size: 5.86 µm x 5.86 µm Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2" (13.3 mm diagonal) Spectral range: With protection glass app. 350 nm to 1000 nm Quantum Efficiency 72% at 520 nm (including sensor cover slip) Max. Full Well Capacity: Approx. 32.000 e Selectable Resolution: H x V Binning Faktor (digital) 1920 x 1216 1x1 basic pixel count 960 x 608 2x2 640 x 404 3x3 480 x 304 4x4 384 x 240 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms, H x V Frame Rate 1936 x 1460 >100 fps Frame rates for time series recording (depending on computer hardware and software configuration) H x V Frame Rate 1920 x 1216 128 1920 x 1080 145 960 x 612 245 480 x 306 458 384 x 244 557 1280 x 112 982 1024 x 112 1003 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit (internal 12 Bit ADC, 14 Bit by data processing) Dynamic Range: Typical >5000 : 1 (74> dB) at typ. <(><<)> 6.e readout noise Dark current: ca. 1.1 e/p/s Integration Time: 0.1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 15°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 300 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 4.7 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 2 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Trigger Cable Set Axiocam 5xx/7xx (D)

Recover

Item no.: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx (D)

Item Number: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Dutch NL (O)

Recover

Item no.: 410380-0800-000

Language Pack Dutch NL (O)

Item Number: 410380-0800-000

Language Pack Dutch NL (O) - Keyboard with Dutch layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

USB 3.0 Card PCIe EX-11094 (O)

Recover

Item no.: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O)

Item Number: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O) - PCIe x1 USB 3.0 Interface EX-11094 - compatibel with PCIe x1, x4, x8 and x16 slots - Single Chip Controller with 4x USB 3.0 connectors - max. data transfer rate 1 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Recover

Item no.: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Item Number: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O) Visible diagonal: 95 cm, 21:9 curved Maximum resolution: 3840 x 1600 pixel @ 60 Hz Brightness: 300 cd/m² Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 2.0 Data connectors: 1 x USB Type C (upstream), 3 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 195 W, Typical 80 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 55.9 cm x 89.6 cm x 24.8 cm Weight incl. stand: 13.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 12 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Recover

Item no.: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Item Number: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 Pixel @ 60 Hz Brightness: 400 cd/m² Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, Thunderbolt 4.0 Data connectors: 1 x USB Type-C 5Gbps, 4 x SuperSpeed USB Type-A 5Gbps, 1 x Ethernet RJ45 1Mbps Power consumption: Maximum 180 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 60.49 cm x 71.35 cm x 21.7 cm Weight incl. stand: 9 kg Ergonomic features: Tilt: -5° to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Recover

Item no.: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Item Number: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Recover

Item no.: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Item Number: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA T1000 8 GB mDP (O)

Recover

Item no.: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O)

Item Number: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Recover

Item no.: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Item Number: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs:3 x DisplayPort 1.4 (DP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Item Number: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O) - Extension of default RAID system - Increase capacity from 6 TB (RAID 1) to 12 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

SSD 2 TB M.2 NVMe, additional (O)

Recover

Item no.: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O)

Item Number: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O) - data storage with high performance for data handling with high bandwidth requirement - maximum count per workstation: 1; 2nd SATA harddisk 8 TB required - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 64 GB module - DDR4 2933 MHz ECC registered DIMM - can be extended to 128 GB (2 x 410303-6400-000), 256 GB (4 x 410303-6400-000) or 384 GB (6 x 410303-6400-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Recover

Item no.: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Item Number: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Recover

Item no.: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Item Number: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 (O)

Recover

Item no.: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O)

Item Number: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System Configuration 5d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O)

Item Number: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 800, LSM 800 MPLX Upgr., LSM 900, LSM 980, Elyra 7, Celldiscoverer 7, Axioscan 7, Lattice Lightsheet 7 and Widefield Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 4d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O)

Item Number: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for Lightsheet Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 3d for Z6 G4 (O)

Recover

Item no.: 000000-2561-499

System Configuration 3d for Z6 G4 (O)

Item Number: 000000-2561-499

System Configuration 3d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 700, LSM 780, LSM 880 and Elyra Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 1d for Z6 G4 (O)

Recover

Item no.: 000000-2548-757

System Configuration 1d for Z6 G4 (O)

Item Number: 000000-2548-757

System Configuration 1d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Without ZEN Software Installation - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

ystem Configuration 3 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-755

ystem Configuration 3 for HP Z2 G9 (O)

Item Number: 000000-2548-755

System Configuration 3 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 700 Systems - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 2 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O)

Item Number: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 1 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O)

Item Number: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Software for image processing (164)

arivis SMA

Item has been added to the configuration

arivis Pro SMA, Entry Fee - ACA

Recover

Item no.: 410158-9001-101

arivis Pro SMA, Entry Fee - ACA

Item Number: 410158-9001-101

arivis Pro SMA, Entry Fee - ACA Flat entry fee for SMA for arivis Pro that needs to be paid after 8 months or more without an SMA. Purchase of a valid SMA for arivis Pro together with the Entry Fee is required. This entry fee allows to catch up on former software releases. It can be waved off if 3 years of SMA are ordered upfront

Item has been added to the configuration

arivis Pro SMA, local and floating - ACA

Recover

Item no.: 410158-2001-101

arivis Pro SMA, local and floating - ACA

Item Number: 410158-2001-101

arivis Pro SMA, local and floating - ACA The Software Maintenance Agreement for local and floating arivis Pro licenses covers all arivis Pro modules including VR and SIS Converter Pro for one year. Maintenance for SIS converter Pro included. SMA required for new permanent licenses. The SMA includes customer support and software updates for the duration of the maintenance agreement. In general, two main software updates per year that cover bug fixes and adds functionality to the purchased arivis Pro modules and the SIS Converter Pro. It includes access to support portal and ticketing system via https://kb.arivis.com/

Item has been added to the configuration

ZEISS arivis Cloud 1 year Industry

Recover

Item no.: 410145-3035-100

ZEISS arivis Cloud 1 year Industry

Item Number: 410145-3035-100

ZEISS arivis Cloud 1 year Industry The arivis Cloud Industry License is valid for one year, includes 1 arivis Cloud account and is restricted to industry customers. It contains: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

arivis Cloud 1 year Academia

Recover

Item no.: 410145-3034-100

arivis Cloud 1 year Academia

Item Number: 410145-3034-100

arivis Cloud 1 year Academia The arivis Cloud Academia License is valid for one year, includes 2 arivis Cloud accounts and is restricted to academic customers. The 2 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

arivis Software

Item has been added to the configuration

arivis Pro Convert local license to floating - ACA

Recover

Item no.: 410158-8001-101

arivis Pro Convert local license to floating - ACA

Item Number: 410158-8001-101

arivis Pro Convert local license to floating - ACA convert a local license to a floating license to give access to the license in a network environment to multiple users. 1 concurrent user

Item has been added to the configuration

arivis Pro VR Convert local to floating - ACA

Recover

Item no.: 410156-8001-101

arivis Pro VR Convert local to floating - ACA

Item Number: 410156-8001-101

arivis Pro VR Convert local to floating - ACA convert a local license of arivis Pro VR to a floating license, 1 concurrent user

Item has been added to the configuration

arivis Pro VR Visualization Module, local - ACA

Recover

Item no.: 410156-0012-101

arivis Pro VR Visualization Module, local - ACA

Item Number: 410156-0012-101

arivis Pro VR Visualization Module, local - ACA 3D visualization software for immersive image data visualization of raw voxel data. Permanent license. Extract data and structural relationships not accessible by standard 2D or 3D viewing applications.View real image data, in direct volume rendering, without the need to convert them to a surface object. Experience your images in an assimilated physical representation. Simply load your image data and use the 3D tracked Meta headsets and touch controllers to look at your image from any possible angle. Use your hands to scale the image and travel through it to investigate intricate details. An intuitive menu system allows to change opacity settings as well as save and reload points of interest. Direct Volume Rendering (visualization of intensity data) in Virtual Reality, 3D Maximum Intensity Rendering in Virtual Reality, Sphere cloud rendering of 3D voxel data, Color mapping and opacity Control. Support for Meta Rift, Rift S, and Quest (tether mode only)VR headset, Meta Touch VR Controller support, Free rotational, translational, and scalable interaction with image data, and free positioning (inclination, height) of a clipping plane, Advanced clipping tools (plane, spherical clipping), Various screenshot and video export options (High resolution, 360°, ...) Dynamic down-sampling for data larger than GPU memory.

Item has been added to the configuration

arivis Pro VR Tracking Module, local - ACA

Recover

Item no.: 410156-0011-101

arivis Pro VR Tracking Module, local - ACA

Item Number: 410156-0011-101

arivis Pro VR Tracking Module, local - ACA Visualization of 3D over time tracks in Virtual Reality, VR Tracking tools to edit existing tracks (Split, Merge), Manual creation of elaborate tracks without the need of prior segmentation. Automatic Tracking requires a license of arivis arivis Pro Tracking <(>&<)> Lineage. Requires arivis Pro VR Visualization Module

Item has been added to the configuration

arivis Pro VR Measure Module, local - ACA

Recover

Item no.: 410156-0010-101

arivis Pro VR Measure Module, local - ACA

Item Number: 410156-0010-101

arivis Pro VR Measure Module, local - ACA This Module allows for interactive measurements of distances in 3D (2- point, multi-point, angle). Manual counting and classification in Virtual Reality Registration Tool for fusion of two 3D volumes using VR based on interactive surface transform. VR Visualization Module is required.

Item has been added to the configuration

arivis Pro VR Collaboration Module,additional user - ACA

Recover

Item no.: 410156-0009-101

arivis Pro VR Collaboration Module,additional user - ACA

Item Number: 410156-0009-101

arivis Pro VR Collaboration Module,additional user - ACA Additional user accounts for collaboration modules. Individual logins. Users can participate in session but not edit objects.

Item has been added to the configuration

arivis Pro VR Collaboration Module, local - ACA

Recover

Item no.: 410156-0008-101

arivis Pro VR Collaboration Module, local - ACA

Item Number: 410156-0008-101

arivis Pro VR Collaboration Module, local - ACA Share presentation of 3D images with own VR toolset. Join a session with up to 30 interacting users in VR space. Use presenter tools in collaborative sessions (pointer, highlighter, clipping, ROI). Voice-Chat with positional audio or any web meeting services (i.e MS teams, Skype, GoToMeeting, Cisco Webex, etc.). Easy, custom defined access of the data set to be viewed. Interactive participation without VR hardware. Allows loading of arbitrary ROIs in native resolution. Includes user login and access for one presenter and one collaborator.

Item has been added to the configuration

arivis Pro VR Analysis Module, local - ACA

Recover

Item no.: 410156-0007-101

arivis Pro VR Analysis Module, local - ACA

Item Number: 410156-0007-101

arivis Pro VR Analysis Module, local - ACA Import and displaying of segmentation results from arivis Pro, De-novo creation of segments (manual, intensity based, opacity based), Manual editing of segments (add, dilate, smoothen, cut, merge, delete), Sculpting brush tool to interface segment editing process, Semi- automatic magic wand segmentation tool, VR displaying of selectable segment calculations (i.e. volume, surface area,). A license of arivis Pro Visualization and Analysis Package is recommended.

Item has been added to the configuration

arivis Pro Module Neuron Tracing - ACA

Recover

Item no.: 410156-0006-101

arivis Pro Module Neuron Tracing - ACA

Item Number: 410156-0006-101

arivis Pro Module Neuron Tracing - ACA Quantification of neuronal filamentous structures The Neuron Tracing module allows you to automatically trace neurites or other filamentous neuronal structures. It offers two algorithms to choose from: The automatic reconstruction of the neurons is either threshold-based or probability-based. You can start both tracing algorithms from a cell body or directly on neuron structures without visible cell bodies. Both are ideally suited for fluorescence imaging. Semi-automated tools are available for manual trace editing in 2D and 3D. This allows you to manually change trace structures quickly and efficiently. You can view and export statistical measurements such as overall length, volume, number of branches and endpoints, branch levels and depths, and section diameters and many more.

Item has been added to the configuration

arivis Pro Module Volume Fusion - ACA

Recover

Item no.: 410156-0005-101

arivis Pro Module Volume Fusion - ACA

Item Number: 410156-0005-101

arivis Pro Module Volume Fusion - ACA Fusion of two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Ideal for multi-view image reconstruction. Volumes can be adjusted and aligned based on a surface representation or via landmarks, optionally each volume can be put in its own channel.

Item has been added to the configuration

arivis Pro Module Exchange Objects - ACA

Recover

Item no.: 410156-0004-101

arivis Pro Module Exchange Objects - ACA

Item Number: 410156-0004-101

arivis Pro Module Exchange Objects - ACA This software module allows the import of binary mask and labeled images which are the result of segmentation functions in other programs, as 3D- objects into arivis Pro. These can then be used for 3D evaluationor within your 3D / 4D image analysis pipeline. This function is very suitable to transfer ZEN Intellesis segmentation results for 3D image analysis in arivis Pro.

Item has been added to the configuration

arivis Pro Module Batch Analysis - ACA

Recover

Item no.: 410156-0003-101

arivis Pro Module Batch Analysis - ACA

Item Number: 410156-0003-101

arivis Pro Module Batch Analysis - ACA Software module for arivis Pro which allows batch analysis of many images with the same pipeline

Item has been added to the configuration

arivis Pro Module Tracking and Lineage - ACA

Recover

Item no.: 410156-0002-101

arivis Pro Module Tracking and Lineage - ACA

Item Number: 410156-0002-101

arivis Pro Module Tracking and Lineage - ACA The tracking module allows analysis of the movement of small (i.e. particle tracking) or large objects (e.g. nuclei, cells, organisms) over time, providing quantitative information on movement, tracks, cell division and object properties over the time series. By identifying structures in 3D over time one can see live cell dynamics and quantitatively compare and quantify various parameters in living cells. A large variety of measurement parameters are available for tracking and lineage experiments

Item has been added to the configuration

Extension of the arivis Pro TL license by one year - ACA

Recover

Item no.: 410155-3101-101

Extension of the arivis Pro TL license by one year - ACA

Item Number: 410155-3101-101

Extension of the arivis Pro TL license by one year - ACA The duration of arivis Pro TL license (time limited for 1 year) included in the ZEN Desk and arivis Pro TL package can be extended on a yearly basis. Multiple years can be provided. This yearly fee also includes access to customer support and software updates. This part can only be purchased together with a ZEN Desk and arivis Pro TL package and is only available for Academia customers. Maximum extension up to 5 years

Item has been added to the configuration

arivis Hub POC Environment licensing, subscription 3 months - IND

Recover

Item no.: 410155-3003-102

arivis Hub POC Environment licensing, subscription 3 months - IND

Item Number: 410155-3003-102

arivis Hub POC Environment licensing, subscription 3 months - IND Licensing for POC (Proof -Of-Concept) arivis Hub environment on a workstation or in the cloud, configured identically to the purchased production environment. Limited to 3-months. For deployment in customers environment installation and configuration is charged separately (arivis Hub Implementation and configuration, per day).

Item has been added to the configuration

arivis Pro TL license for 1 year - ACA

Recover

Item no.: 410155-3001-101

arivis Pro TL license for 1 year - ACA

Item Number: 410155-3001-101

arivis Pro TL license for 1 year - ACA The arivis pro (TL) package is only allowed to be sold together with a new microscopy system and a ZEN desk license. This arivis pro (TL) temporary license is valid for one years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact: support-zeiss@arivis.com) with regular SW updates. After 1 year this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time

Item has been added to the configuration

arivis SIS Converter Pro

Recover

Item no.: 410155-0004-101

arivis SIS Converter Pro

Item Number: 410155-0004-101

arivis SIS Converter Pro Stand alone arivis SIS File Converter - including Watchdog functionality; Fast, automatic and unattended file conversion process from image acquisition to SIS format; - Multiple configurable import sources for file conversion

Item has been added to the configuration

arivis Pro for 3D Visualization and Data Analysis -ACA

Recover

Item no.: 410155-0001-101

arivis Pro for 3D Visualization and Data Analysis -ACA

Item Number: 410155-0001-101

arivis Pro for 3D Visualization and Data Analysis -ACA Software package for 3D visualization and analysis of multi-dimensional image data sets which have been created by 3D imaging systems such as LSM, ApoTome, Spinning Disk, Widefield Deconvolution, Lightsheet and, Electron Microscopes and others. The software features extraordinary performance in handling really large data sets up to multiple terabytes while allowing fully interactive visualization. This package includes tools for: 3D object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), Machine Learning for object segmentation and classification and other advance segmentation tools. It also includes tools for advanced analysis (quantification of object relationships, distances, overlapping regions) per cell or per compartment analysis. Furthermore, this package includes stitching tools and many pre-processing tools for image enhancement. The software can be extended with various modules for advanced image analysis

Item has been added to the configuration

Special arivis Pro SW package for Volutome, 1 year

Recover

Item no.: 410154-3008-100

Special arivis Pro SW package for Volutome, 1 year

Item Number: 410154-3008-100

Special arivis Pro SW package for Volutome, 1 year Special arivis SW package for Volutome - includes a 1 year license of arivis Pro, arivis AI toolkit for 1 year, and a 3 hour web Training For academia Volutome customers only.

Item has been added to the configuration

arivis Pro APAC Package Visualization, 3D Analysis -ACA

Recover

Item no.: 410154-3003-101

arivis Pro APAC Package Visualization, 3D Analysis -ACA

Item Number: 410154-3003-101

arivis Pro APAC Package Visualization, 3D Analysis -ACA This special arivis Pro package is valid for two years and includes the following items: - arivis Pro for 3D Visualization and Data Analysis - arivis Pro Module Tracking - arivis Pro Module Exchange Objects - arivis Pro initial WEB based training The package encompasses a reduced transfer price: - Only for APAC SSCs: China, Japan, South Korea, India, ANZ and SEA - starts from Oct 1st, 2021 - mandatory for new Elyra 7, Lightsheet, and Lattice Lightsheet 7 - cannot be ordered for other systems - has a limited 2 years license - only valid for Academia customers

Item has been added to the configuration

Special arivis Pro SW package for Volutome

Recover

Item no.: 410154-0008-100

Special arivis Pro SW package for Volutome

Item Number: 410154-0008-100

Special arivis Pro SW package for Volutome This package includes: 1 arivis Pro for 3D Visualization and Data Analysis - ACA permanent license 1 arivis AI Toolkit Academia: Cloud/local DL Trainer - ACA license 1 arivis Pro SMA, local – ACA (Software Maintenance contract for 1 year) This part is only available for customers who had a license for the Special arivis Pro SW package for Volutome , 1 year For academia Volutome customers only.

Item has been added to the configuration

arivis AI Package Academia: Cloud/local DL Trainer - ACA

Recover

Item no.: 410154-0005-101

arivis AI Package Academia: Cloud/local DL Trainer - ACA

Item Number: 410154-0005-101

arivis AI Package Academia: Cloud/local DL Trainer - ACA This arivis AI Package offers the choice of cloud-based and local computing as required for individual use cases and setups. It consists of 2 parts and is only valid for Academia customers. 1. The arivis Cloud license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning tools (arivis AI) as well as to pre-built applications for 2 users. It enables customers to train robust AI models for imagesegmentation via powerful neural networks with more than 6 million parameters. Deep Learning Training in the cloud frees up local computing capacities. Using this state-of-the- art technology allows more efficient workflows and best performance for variousimage analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN or in the cloud. 2. In addition, the package includes an arivis Pro AI Deep Learning local training Module. It allows users to locally train Deep Learning (DL) models on their workstations This is a permanent license and requires an up-to date arivis Pro license. This combination enables customers to use the locally and/or cloud trained Deep Learning models as part of their arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analysis tools (quantification of object relationships, distances). Both partsare applicable onimage data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images.

Item has been added to the configuration

arivis Pro Analysis Big Package + VR, local - ACA

Recover

Item no.: 410154-0001-101

arivis Pro Analysis Big Package + VR, local - ACA

Item Number: 410154-0001-101

arivis Pro Analysis Big Package + VR, local - ACA Contains a big package of V4D for Academia as a permanent license. It includes the following modules: arivis Pro for 3D Visualization and Data Analysis arivis Pro Module Tracking arivis Pro Module Exchange Objects arivis Pro Module Batch Analysis arivis Pro Module Volume Fusion arivis SIS Converter Pro The Neuron Tracing module is not included. It also includes a complementary license of arivis Pro VR Visualization and Measure

Item has been added to the configuration

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

arivis Subscription

Item has been added to the configuration

arivis Hub LDAP/AD, annual subscription - ACA

Recover

Item no.: 410156-5018-101

arivis Hub LDAP/AD, annual subscription - ACA

Item Number: 410156-5018-101

arivis Hub LDAP/AD, annual subscription - ACA The arivis Hub LDAP/AD package is a user management upgrade to the Basic Analysis Package and allows for the connection to an LDAP systems or other active directory. Annual subscription

Item has been added to the configuration

arivis Pro VR annual subscription Pack, floating - IND

Recover

Item no.: 410156-2001-102

arivis Pro VR annual subscription Pack, floating - IND

Item Number: 410156-2001-102

arivis Pro VR annual subscription Pack, floating - IND This package provides an annual subscription for all VR Modules including Visualization,Measure, Analysis, Tracking Collaboration + 1 additional User. This package can be installed as a floating license.

Item has been added to the configuration

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND

Recover

Item no.: 410156-0023-102

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND

Item Number: 410156-0023-102

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND arivis Hub module for completing analysis jobs and workflows. Enables 16 CPU cores each. The number of CPU Core Packs determines the maximum number of parallel analysis processes. Annual subscription.

Item has been added to the configuration

arivis Hub Additional user,subscription - IND

Recover

Item no.: 410156-0022-102

arivis Hub Additional user,subscription - IND

Item Number: 410156-0022-102

arivis Hub Additional user,subscription - IND Provides an additional concurrent, named user for the arivis Hub. Annual subscription

Item has been added to the configuration

arivis VisionHub - Image and Data Watcher, annual subscription

Recover

Item no.: 410156-0021-102

arivis VisionHub - Image and Data Watcher, annual subscription

Item Number: 410156-0021-102

arivis VisionHub - Image and Data Watcher, annual subscription arivis VisionHub module for watching files for automatic registration and workflow analysis.

Item has been added to the configuration

arivis Hub User Mgmt Enterprise, subscription - IND

Recover

Item no.: 410156-0020-102

arivis Hub User Mgmt Enterprise, subscription - IND

Item Number: 410156-0020-102

arivis Hub User Mgmt Enterprise, subscription - IND The User Management Module Enterprise Package includes the capacity for up to 250 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub User Management Advanced subscription - IND

Recover

Item no.: 410156-0019-102

arivis Hub User Management Advanced subscription - IND

Item Number: 410156-0019-102

arivis Hub User Management Advanced subscription - IND The User Management Module Advanced Package includes the capacity for up to 100 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub User Management Basic, subscription - IND

Recover

Item no.: 410156-0017-102

arivis Hub User Management Basic, subscription - IND

Item Number: 410156-0017-102

arivis Hub User Management Basic, subscription - IND The User Management Module Basic includes the capacity for up to 25 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub 3D Stream Pack (2 streams), subscription - IND

Recover

Item no.: 410156-0016-102

arivis Hub 3D Stream Pack (2 streams), subscription - IND

Item Number: 410156-0016-102

arivis Hub 3D Stream Pack (2 streams), subscription - IND Additional parallel streams for server-based 3D rendering of volume and object data. One 3D Stream Package allows for 2 additional simultaneous 3D render streams. Appropriate GPU performance needs to be provided by customer. GPUs can be shared by multiple streams (splitting performance and memory). Annual subscription

Item has been added to the configuration

arivis Hub HCA Module, subscription - IND

Recover

Item no.: 410156-0015-102

arivis Hub HCA Module, subscription - IND

Item Number: 410156-0015-102

arivis Hub HCA Module, subscription - IND arivis Hub module for visualizing well-plate data in well format and heatmap view of results over well plate for workflow runs. Requires Workflow Execution Module Annual subscription

Item has been added to the configuration

arivis Hub Workflow Execution, subscription - IND

Recover

Item no.: 410156-0014-102

arivis Hub Workflow Execution, subscription - IND

Item Number: 410156-0014-102

arivis Hub Workflow Execution, subscription - IND arivis Hub module dedicated to running and archiving image analysis pipelines created with arivis Pro. This module includes tools for: management of pipelines, running pipelines on selected images, scheduling image analysis jobs, visualizing objects and results of executed analysis jobs, exporting objects and results, access to extracted numerical results. This module includes 1 CPU Core Pack to support 1x16 cores for image processing and 1x arivis Pro full annual subscription license (all modules, floating) as well as 2x SIS Converter Pro floating licenses. Annual subscription

Item has been added to the configuration

arivis Hub 3D Visualization Pack subscription - IND

Recover

Item no.: 410156-0013-102

arivis Hub 3D Visualization Pack subscription - IND

Item Number: 410156-0013-102

arivis Hub 3D Visualization Pack subscription - IND Server-based 3D rendering capabilities for both volume data The arivis Hub 3D Visualization Module includes 1x 3D Stream Package to support 2 parallel streams. Annual subscription

Item has been added to the configuration

arivis Pro floating addon for arivis Hub subscription - ACA

Recover

Item no.: 410155-5005-101

arivis Pro floating addon for arivis Hub subscription - ACA

Item Number: 410155-5005-101

arivis Pro floating addon for arivis Hub subscription - ACA This yearly subscription package of arivis Pro which can only be offered to customers with an active license of arivis Hub Basic Analysis Package - ACA Up to 10 subscription licences for arivis Pro can be offered to customers with active licenses of arivis Hub Basic Analysis Package per year. This package is for academia customers only and includes one full arivis Pro license including all modules and one arivis AI license package: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This software allows fast and fully interactive visualization and analysis of large data sets up to multiple terabytes of 2D, 3D and 4D dataset. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage ofnuclei, cells). The function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. Thefunction group File Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a fileis created by the microscope. This package includes 2 local File Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore, traces can be edited with manual or semi-automatic easy-to-use tracing trace editing tools 2.This package also includes one arivis AI premium package offering the choice of cloud-based and local deep learning training as required for individual use cases and setups. The arivis AI package consists of two parts: a) The arivis Cloud AI license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications for 1 user.It enables customers to train robust AI models for imagesegmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1TB storage. Using this state-of- the-art technology allowsmore efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. b) In addition, the package includes an arivis Pro AI Deep Learning localtraining module. Itallows users to locally train Deep Learning (DL) models on their workstations. These trained models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence andEM) of various file formats for 2D or 3/4D images. With the flexible floating license users are able to start the application on different workstations. The software can be installed by the customer or by a ZEISS employee. Fromthe time of installation, the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

arivis Hub Server Base Management, subscription - IND

Recover

Item no.: 410155-5002-102

arivis Hub Server Base Management, subscription - IND

Item Number: 410155-5002-102

arivis Hub Server Base Management, subscription - IND arivis Hub Server Base Management system is a server-based software dedicated to image management and data viewing capabilities. Users connected to the server and to the arivis Hub can: - upload anddownload image data, - register natively supported file formats (SIS, CZI, TIFF, OME-TIFF, JPEG) - easily access image data from any device with easy 2D file viewing - create 2D manual annotations such as arrows, text, circles, and polygons - performquick manual 2D measurements such distances and areas Annual subscription. Includes 5 named users

Item has been added to the configuration

arivis Hub Basic Analysis Package, subscription - ACA

Recover

Item no.: 410154-5006-101

arivis Hub Basic Analysis Package, subscription - ACA

Item Number: 410154-5006-101

arivis Hub Basic Analysis Package, subscription - ACA The annual subscription of a arivis Hub -Basic Analysis Package for Academia includes: 1. Server Base Management System 2. User Management for unlimited users restricted to 10 user groups 3. Workflow Execution which includes a subscription license of arivis Pro full package (floating) including all available arivis Pro modules and 1x SIS Converter Pro floating license valid for one year

Item has been added to the configuration

ZEISS arivis Hub Enterprise Package - IND

Recover

Item no.: 410154-2007-102

ZEISS arivis Hub Enterprise Package - IND

Item Number: 410154-2007-102

ZEISS arivis Hub Enterprise Package - IND This package is for industry customers and includes one full arivis Pro license including all modules and one arivis Cloud Premium license and one arivis Hub Package for server-based image processing: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large 2D, 3D and 4D data sets up to multiple terabytes. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre-processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image.Furthermore traces can be edited manually with manual or semi-automatic easy-to-use tracing trace editing tools. The Function Group arivis Pro AI Deep Learning local Training module allows users to locally train Deep Learning (DL) models on their workstations. These trained models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. 2. This package also includes one arivis Cloud Premium license (formerly APEER). The arivis Cloud Premium license is valid for one year and includes full access to the cloud-based Deep Learning tools as well as to pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. With the flexible floating license arivis Pro users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. 3. The arivis Hub package allows running arivis Pro analysis pipelines on a cloud or local server for efficient batch or large scale analysis without the need to copy image data to local work stations. It includes: arivis Hub Server Base Management, subscription- IND arivis Hub Workflow Execution incl. 1 CPU Core Pack arivis Hub User Management Basic 7xCPU Core Packs Hardware and Implementation not included. From the time of installation the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

arivis Pro and AI Package subscription, float – IND

Recover

Item no.: 410154-2004-102

arivis Pro and AI Package subscription, float – IND

Item Number: 410154-2004-102

arivis Pro and AI Package subscription, float – IND This package is for industry customers and includes one full arivis Pro license including all modules and one arivis AI license package: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large data sets up to multiple terabytes of 2D, 3D and 4D dataset It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore, traces can be edited manually with manual or semi-automatic easy-to-use tracing trace editing tools. 2. This package also includes one arivis AI premium package offering the choice of cloud-based and local deep learning training as required for individual use cases and setups. The arivis AI package consists of two parts: a) The arivis Cloud AI license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU & 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. b) In addition, the package includes an arivis Pro AI Deep Learning local training module. It allows users to locally train Deep Learning (DL) models on their workstations. These train models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. With the flexible floating license users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. From the time of installation, the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

ZEISS arivis Pro and AI Enterprise Package - IND

Recover

Item no.: 410154-2002-102

ZEISS arivis Pro and AI Enterprise Package - IND

Item Number: 410154-2002-102

ZEISS arivis Pro and AI Enterprise Package - IND This package is for industry customers and includes two full arivis Pro licenses including all modules and three arivis Cloud Premium licenses for access to arivis AI (local and cloud) 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large 2D, 3D and 4D data sets up to multiple terabytes. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore tracescan be edited manually with manual or semi automatic easy-to-use tracing trace editing tools. The Function Group arivis Pro AI Deep Learning local Training module allows users to locally train Deep Learning (DL) models on their workstations. These trainedmodels can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses(quantification of object relationships, distances). 2. This package also includes three arivis Cloud Premium licenses (formerly APEER). These licenses are valid for one year and includes full access to the cloud-based Deep Learning tools as well asto pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in arivis Cloud. With the flexible floating license arivis Pro users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. From the time of installation, the SW licenseis valid for 365 days (subscription model) and can be renewed after that period.

ZEN core SMA

Item has been added to the configuration

SMA Fee ZEN core with Motorized Acquisition 1 year

Recover

Item no.: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year

Item Number: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Acquisition and all hardware- related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Item has been added to the configuration

SMA Fee ZEN analyzer 1 year

Recover

Item no.: 410139-0035-000

SMA Fee ZEN analyzer 1 year

Item Number: 410139-0035-000

SMA Fee ZEN analyzer 1 year Entitlement to upgrade ZEN analyzer free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN analyzer. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN analyzer configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band A-B") must be included: - AI Toolkit ("SMA ZEN Band B") - 2D Toolkit ("SMA ZEN Band A") - 3D Toolkit ("SMA ZEN Band A") - Connect Toolkit ("SMA ZEN Band A") - Materials Apps ("SMA ZEN Band A") - TCA Modul ("SMA ZEN Band A") - NMI Modul ("SMA ZEN Band A") - Developer Toolkit ("SMA ZEN Band A") - GxP Toolkit ("SMA ZEN Band A")

Item has been added to the configuration

SMA Fee ZEN core 1 year

Recover

Item no.: 410139-0011-000

SMA Fee ZEN core 1 year

Item Number: 410139-0011-000

SMA Fee ZEN core 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Focus Acquisition and all hardware-related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

ZEN Modules image analysis

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.9

Recover

Item no.: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9

Item Number: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.8

Recover

Item no.: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8

Item Number: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.9

Recover

Item no.: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9

Item Number: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.8

Recover

Item no.: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8

Item Number: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.9

Recover

Item no.: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9

Item Number: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.8

Recover

Item no.: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8

Item Number: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.9

Recover

Item no.: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9

Item Number: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.8

Recover

Item no.: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8

Item Number: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Recover

Item no.: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Item Number: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.9 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Recover

Item no.: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Item Number: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic Upgrade of an existing ZEN desk Floating License to ZEN 3.8 desk Floating License Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Recover

Item no.: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Item Number: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Recover

Item no.: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Item Number: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Recover

Item no.: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Item Number: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Recover

Item no.: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Item Number: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Recover

Item no.: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Item Number: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Recover

Item no.: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Item Number: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Recover

Item no.: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Item Number: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.9 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Recover

Item no.: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Item Number: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.8 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or newer does not require this item.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk

Recover

Item no.: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk

Item Number: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk Upgrade of an existing ZEN desk software to ZEN 3.9 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.8 desk

Recover

Item no.: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk

Item Number: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk Upgrade of an existing ZEN desk software to ZEN 3.8 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.9

Recover

Item no.: 410138-0102-390

Upgrade ZEN to ZEN 3.9

Item Number: 410138-0102-390

Upgrade ZEN to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.8

Recover

Item no.: 410138-0102-380

Upgrade ZEN to ZEN 3.8

Item Number: 410138-0102-380

Upgrade ZEN to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Image processing 3rd Party SW

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9 Floating License

Recover

Item no.: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License

Item Number: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.9 Floating License Note: The upgrade consists only of the ZEN analyzer 3.9 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8 Floating License

Recover

Item no.: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License

Item Number: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.8 Floating License Note: The upgrade consists only of the ZEN analyzer 3.8 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9 with Motorized Acquisition

Recover

Item no.: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition

Item Number: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.9 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8 with Motorized Acquisition

Recover

Item no.: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition

Item Number: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.8 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9

Recover

Item no.: 410138-0135-390

Upgrade to ZEN analyzer 3.9

Item Number: 410138-0135-390

Upgrade to ZEN analyzer 3.9 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.9 Note: The upgrade consists only of the ZEN analyzer 3.9 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8

Recover

Item no.: 410138-0135-380

Upgrade to ZEN analyzer 3.8

Item Number: 410138-0135-380

Upgrade to ZEN analyzer 3.8 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.8 Note: The upgrade consists only of the ZEN analyzer 3.8 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9

Recover

Item no.: 410138-0111-390

Upgrade to ZEN core 3.9

Item Number: 410138-0111-390

Upgrade to ZEN core 3.9 Upgrade of an existing ZEN core software version to ZEN core 3.9 Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8

Recover

Item no.: 410138-0111-380

Upgrade to ZEN core 3.8

Item Number: 410138-0111-380

Upgrade to ZEN core 3.8 Upgrade of an existing ZEN core software version to ZEN core 3.8 Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Transfer ZEN to ZEN core 3.9

Recover

Item no.: 410138-0011-390

Transfer ZEN to ZEN core 3.9

Item Number: 410138-0011-390

Transfer ZEN to ZEN core 3.9 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.9 Consisting of: - ZEN core 3.9 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.8

Recover

Item no.: 410138-0011-380

Transfer ZEN to ZEN core 3.8

Item Number: 410138-0011-380

Transfer ZEN to ZEN core 3.8 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.8 Consisting of: - ZEN core 3.8 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

ZEN Module Data Management

Item has been added to the configuration

Upgrade ZEN Data Explorer Viewer

Recover

Item no.: 410138-0931-360

Upgrade ZEN Data Explorer Viewer

Item Number: 410138-0931-360

Upgrade ZEN Data Explorer Viewer Conversion of an existing ZEN Data Storage Server License (Version 22.40 or older) into a license compatible with version 23.xx (or higher). The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. The newly integrated viewer, based on server side rendering, significantly enhances the display performance which is mainly reflected in the fast display of large and very large image files. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version: 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android Version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

Item has been added to the configuration

ZEN Data Storage Server

Recover

Item no.: 410135-0031-360

ZEN Data Storage Server

Item Number: 410135-0031-360

ZEN Data Storage Server Database for storage and multi-client access of documents on a centralized server. ZEN applications can connect to the server as clients to store and retrieve data. ZEN Data Storage provides a client-server database solution for microscopy customers who deal with the storage of large amounts of data originating from one or several microscopes. ZEN Data Storage allows the exchange of data and workflows and supports microscopists who want to separate image acquisition from post-acquisition work. In this way it also facilitates correlative workflows where the data of a sample can be accessed from a centralized location. "Server side rendering" based display enables the user to visualize also very large files in a fast and seamless way. The centralized ZEN Data Storage enables IT managers to ensure data security and backup availability. It allows to manage users and user rights within a laboratory or even across multiple sites. Main features: - Scalable server database solution based on MS-SQL server - Integration into existing server landscape possible - Multi-client concurrent access to data - Server based user and access management - Integration of user management with Active Directory possible - Data access management on user and group level (ZEN blue only) - Full archive integration for ZEN core including storage of documents and templates - Optional: Compatible with ZEN Module GxP in ZEN core The package includes: ZEN Data Explorer - browser or app based client which allows access and viewing of the data stored on the ZEN Data Storage. Main features: - Gallery for browsing, grouping and searching of data - Viewer for images and ZEN Connect projects - Basic annotation functionality - Upload of images and camera snapshots (app version only) - Download and Snapshot functionality - Available in Browser or as app for iOS and Android ZEN Data Storage Uploader - upload tool which monitors a drop folder and uploads and if needed converts the files to CZI. Supported files types CZI, ZVI, Leica LIF, Nikon ND2, Olympus TIF, PDF The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

ZEN core Platform change

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.9

Recover

Item no.: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9

Item Number: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.9. Consisting of: - ZEN core 3.9 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.8

Recover

Item no.: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8

Item Number: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.8. Consisting of: - ZEN core 3.8 basic license - entitles to purchase ZEN Toolkits with a discount

ZEN modules image processing

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.9

Recover

Item no.: 410138-0902-390

Platform change AV 4.x to ZEN 3.9

Item Number: 410138-0902-390

Platform change AV 4.x to ZEN 3.9 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.9 Consisting of: - ZEN 3.9 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.8

Recover

Item no.: 410138-0902-380

Platform change AV 4.x to ZEN 3.8

Item Number: 410138-0902-380

Platform change AV 4.x to ZEN 3.8 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.8 Consisting of: - ZEN 3.8 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

ZEN Module Image Analysis

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Advanced

Recover

Item no.: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced

Item Number: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced ZEN Module Dynamics Profiler Advanced for ZEN desk with additional flow- and diffusion analysis functionality. The ZEN desk Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN desk Module Lattice SIM

Recover

Item no.: 410137-0133-390

ZEN desk Module Lattice SIM

Item Number: 410137-0133-390

ZEN desk Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods.

Item has been added to the configuration

ZEN desk Module SMLM

Recover

Item no.: 410137-0041-390

ZEN desk Module SMLM

Item Number: 410137-0041-390

ZEN desk Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification Floating License

Recover

Item no.: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License

Item Number: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, withRatiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery/ decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data whichhave been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulationisexecuted either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching). Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Lattice SIM floating license

Recover

Item no.: 410136-2133-390

ZEN Module Lattice SIM floating license

Item Number: 410136-2133-390

ZEN Module Lattice SIM floating license ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module SMLM floating license

Recover

Item no.: 410136-2041-390

ZEN Module SMLM floating license

Item Number: 410136-2041-390

ZEN Module SMLM floating license The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Spectral RICS

Recover

Item no.: 410136-0182-390

ZEN Module Spectral RICS

Item Number: 410136-0182-390

ZEN Module Spectral RICS Single-molecule analysis based on raster image correlation spectroscopy. The calculation of CPM (Counts per Molecule) values allows the optimization of the hardware settings for the experiment. The calibration step with known dye solutions defines the confocal volume for quantitative data. Images of several different fluorescently labeled molecules can be clearly separated into image channels using single spectra. The typical crosstalk of the signals into other channels is thus resolved, which enables the calculation of correlations of different molecules to each other (cross-correlation). For analysis, regions in the image can be defined and threshold values can be set. Analysis masks can be created based on image regionsof the same image or a different image. The analysis uses a model of the three-dimensional diffusion of a single molecule. There are three different representations of the analysis to choose from: threshold-based standard analysis, Grid-based heatmap and Intensity-based heat map. In addition to the diffusion velocities, various other result parameters are summarized in a table.

Item has been added to the configuration

ZEN Toolkit 3D

Recover

Item no.: 410136-0172-360

ZEN Toolkit 3D

Item Number: 410136-0172-360

ZEN Toolkit 3D Unlock the full 3D potential with the Toolkit 3D. Equip yourself with a collection of rendering methods, tools for sophisticated visualization and data navigation as well as 3D image analysis. The 3D Toolkit offers multiple types of rendering methods allowing you to choose the visualization that best fits your application. A sophisticated 3D rendering can be overwhelming when exploring a data set. With the viewer available with ZEN 3D Toolkit, 3D and 2D views are placed side-by-side so you may navigate in the 3D space seamless through your sample. Analyze your 3D data – a user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Segmentation is AI-ready: load your Intellesis models or segment object based on thresholding. The resulting objects are visualized in 3D in glass or opaque mode. The measurements include various geometric and intensity measurements, as well as user-defined measurement parameters* which can be sorted and exported. The 3D viewer requires a dedicated up-to-date graphics card with full OpenGL 4.3+ support. Older AMD graphic cards such as AMD FirePro V4900 1GB or ATI FirePro V5800 1GB are not supported any longer. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit 2D

Recover

Item no.: 410136-0168-360

ZEN Toolkit 2D

Item Number: 410136-0168-360

ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Module SMLM

Recover

Item no.: 410136-0041-390

ZEN Module SMLM

Item Number: 410136-0041-390

ZEN Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Special acquisition modalities allow 3- dimensional acquisition via a phase ramp, as well as iterative sequential excitation of two differently labeled molecules.

ZEN modules image acquisition

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Basic

Recover

Item no.: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic

Item Number: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic for ZEN desk with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced Floating License

Recover

Item no.: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License

Item Number: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License ZEN Module Dynamics Profiler Advanced Floating License with additional flow- and diffusion analysis functionality. The Module Dynamics Profiler Basic Floating License is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-2178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-2178-380

ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic Floating License with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Technical Cleanliness Analysis Floating License

Recover

Item no.: 410136-2128-350

ZEN Module Technical Cleanliness Analysis Floating License

Item Number: 410136-2128-350

ZEN Module Technical Cleanliness Analysis Floating License Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-V): (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with AI-based object classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Training of the delivered machine learning models requires in addition ZEN Toolkit AI . (IV) light microscope workflow for correlative technical cleanliness analysis (component and oil cleanliness) with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Toolkit Connect . (V) light microscope workflow for correlative component cleanliness analysis with AI-based object classification. Contains trainable, pre- trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires ZEN Toolkit Connect. Training of the delivered machine learning models requires in addition ZEN Toolkit AI. The job templates cover image acquisition, image analysis and image processing, result presentation ininteractive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Non-Metallic Inclusion Analysis Floating License

Recover

Item no.: 410136-2106-360

ZEN Module Non-Metallic Inclusion Analysis Floating License

Item Number: 410136-2106-360

ZEN Module Non-Metallic Inclusion Analysis Floating License Software Module for evaluation and rating of non-metallic inclusions in steel (Oxides, Sulfides and Nitrides). The following standards are supported: ASTM E45a, ISO 4967, JIS G0555, GB/T 10561, EN 10247, SEP 1571 and DIN 50602. The scope of delivery includes preconfigured and highly automated workflows for steel cleanliness analysis and -rating. The provided job templates are available for the user roles Supervisor and Operator and coverimage acquisition, result presentation in interactive views for fast inspection and revision of inclusions, single reports with results of characteristic values and standard specific methods per mounted specimen. Furthermore, an overview report with the summary of the characteristic values, statistics and method results per standard for a set of evaluated specimens. Automated storage of generated results and inspection views in the data archive. Archived data can be re-opened and viewed. Optimized workflows for mounted specimen with/without nitride inclusions. The workflows can be conducted with acquired or loaded images. - Adjustable image acquisition settings for microscope and camera for the supervisor. Selectable image acquisition settings for the operator - Standard measuring field-based definition of the tiles acquisition area - Automated parallel analysis for all selected standards - Customer database in Excel table format for input forms - Efficient auto segmentation for oxide, sulfideand nitride detection - Artifact filter for automated filtering of scratches - Advanced artifact filter for automated filtering of sulfide halos - Automated detection of the main deformation orientation (horizontal, vertical) - Standard specific severity rating filter: automated exclusion of inclusions per defined size class - Global result view with inclusion gallery for inspection and revision of objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options and result statistics. Standard results selectable by one mouse click. - Field based result view with acquired specimen image, a grid of standard measuring fields, specimen and inclusion live navigation for inspection and revision of objects (oxides, sulfides, nitrides and artifacts), several filter- and sorting options per standard specific inclusion types, true worst field detection and result statistics with field rating. Interactive selection of multiple objects for artifact classification. - Standard results selectable by one mouse click. - Joint result table with characteristic core values of all selected standards. - Reports in Microsoft Word (from Microsoft Word 2013) and export as PDF. Automated generation of reports and summary report for all standards. - Excel export of result tables Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan floating license

Recover

Item no.: 410136-2064-380

ZEN Module Airyscan floating license

Item Number: 410136-2064-380

ZEN Module Airyscan floating license Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format. Floating license allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced

Recover

Item no.: 410136-0179-380

ZEN Module Dynamics Profiler Advanced

Item Number: 410136-0179-380

ZEN Module Dynamics Profiler Advanced Dynamics Profiler Advanced enables to collect unique molecular characteristics of fluorescently labelled proteins or other molecules. Using the individual detector elements of the Airyscan detector, specific fluorescence correlation spectroscopy (FCS) techniques provide additional area-based information. In addition to classic FCS parameters (see SW ZEN Module Dynamics Profiler Basic) every measurement includes the opportunity to analyze a) Dynamics with pair correlation to investigate e.g., diffusion barriers and b) active flow providing speed in µm/s and its direction. The Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-0178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-0178-380

ZEN Module Dynamics Profiler Basic Dynamics Profiler allows to gather details of the molecular characteristics of living samples – providing concentration and dynamics information of fluorescently labelled molecules. Expanding the capability of the Airyscan detector and utilizing the area information gathered from 32 circular arranged detection elements for fluorescence correlation spectroscopy (FCS). Data acquisition is guided by a wizard which serves both simplicity and usability. Using the context of a reference image up to 10 measurement spots can be obtained consecutively and analyzed by various fit models. Additionally, the Raw data of all Airyscan detection elements can be exported and used for individual analysis.

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in thecamera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-380

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-380

ZZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Connect

Recover

Item no.: 410136-0170-360

ZEN Toolkit Connect

Item Number: 410136-0170-360

ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Smart Acquisition

Recover

Item no.: 410136-0167-360

ZEN Toolkit Smart Acquisition

Item Number: 410136-0167-360

ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-390

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-390

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-380

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-380

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drivebacklash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-370

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-370

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment. - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility. - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field. -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-390

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-390

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Base Acquisition

Recover

Item no.: 410136-0164-360

ZEN Toolkit Base Acquisition

Item Number: 410136-0164-360

ZEN Toolkit Base Acquisition Acquire images including Time lapse, multi-channel fluorescence <(>&<)> brightfield. This package allows to acquire fluorescence and transmitted light images as well as contrast methods in independent channels. Furthermore, it provides functionality to acquire a time-lapse image of dynamic samples. For multi-channel acquisitions the following features are available: - Acquisition of multiple independent channels for reflected light and transmitted light techniques - Dyes (including wavelength information) can be selected from a database containing more than 500 dyes or fluorescent proteins, and for all common transmitted light contrast techniques supported by the acquisition system (e.g. brightfield, phase contrast, DIC, darkfield, etc.) - Smart setup generation of the required microscope setting for a channel that is added - Possibility of adjusting light intensity and camera settings manually for each channel - Display of channels in a pseudo color image with overlay option or as a monochrome single channel display - Possibility to generate shading corrections for each channel - A focus reference channel can be defined For time-lapse acquisition following functionality exists: - Definition of time series by selection of intervals, total duration or number of cycles. - Control via time, trigger* or manually *only ZEN

Item has been added to the configuration

ZEN Toolkit Materials Apps

Recover

Item no.: 410136-0162-350

ZEN Toolkit Materials Apps

Item Number: 410136-0162-350

ZEN Toolkit Materials Apps This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximum diameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 6394 2002 - Non-metallic inclusions (NMI): GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004

Item has been added to the configuration

ZEN Module Lattice SIM

Recover

Item no.: 410136-0133-390

ZEN Module Lattice SIM

Item Number: 410136-0133-390

ZEN Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods

Item has been added to the configuration

ZEN Module Airyscan

Recover

Item no.: 410136-0064-380

ZEN Module Airyscan

Item Number: 410136-0064-380

ZEN Module Airyscan Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

ZEN Basic Software

Item has been added to the configuration

ZEN Toolkit Molecular Quantification for ZEN desk

Recover

Item no.: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk

Item Number: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution for ZEN desk

Recover

Item no.: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk

Item Number: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques.

Item has been added to the configuration

ZEN Toolkit 3D for ZEN desk

Recover

Item no.: 410137-0172-370

ZEN Toolkit 3D for ZEN desk

Item Number: 410137-0172-370

ZEN Toolkit 3D for ZEN desk This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifyingautomatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Developer for ZEN desk

Recover

Item no.: 410137-0171-370

ZEN Toolkit Developer for ZEN desk

Item Number: 410137-0171-370

ZEN Toolkit Developer for ZEN desk Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can futher extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core).

Item has been added to the configuration

ZEN Toolkit Connect for ZEN desk

Recover

Item no.: 410137-0170-370

ZEN Toolkit Connect for ZEN desk

Item Number: 410137-0170-370

ZEN Toolkit Connect for ZEN desk This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (required 3Dxl) - ManualAlignment oftwo3D stacks (required 3Dxl)** - Import FIB stacks (*not ZEN lite <(>&<)> ZEN starter; motorized stage required) (**not available in ZENCore)

Item has been added to the configuration

ZEN Toolkit AI for ZEN desk

Recover

Item no.: 410137-0169-370

ZEN Toolkit AI for ZEN desk

Item Number: 410137-0169-370

ZEN Toolkit AI for ZEN desk The Intellesis AI Package allows to train, import and execute different machine- and deep-learning models inside ZEN and ZEN core. It contains three major AI core functionalities: - Machine- and Deep-Learning for segmenting images (training of Deep- Learning models on APEER or externally) - Machine-Learning for Object Classification in analyzed images (requires analyzed image data) - Deep-Learning based Denoising using Noise2Void (no need for labels) For every workflowexists as dedicated tool to label images or objects and train the respective model. The package supports any image data format that can be imported into ZEN and ZEN core incl. data imported via the 3rd party import from other vendors and can process multidimensional datasets including z-stacks, multi-channel and tile images. - Additionally the labeling and training of Deep Neural networks can be purchased as as part of a special customize solution (SCS). -The complete ZEN platform is "AI ready", i.e.trained models can be used in all image analysis tools in ZEN and ZEN core (e.g. Image Analysis, Bio Apps, Guided Acquisition, Technical Cleanliness Analysis, Metallography package,...) for segmentation. To run trained models within these modules, the ZEN Intellesis AI package is not required. - Important: Recommended hardware configuration is 8GB GPU and 64GB RAM. Only Nvidia GPUs and the CPU are supported.

Item has been added to the configuration

ZEN Toolkit 2D for ZEN desk

Recover

Item no.: 410137-0168-370

ZEN Toolkit 2D for ZEN desk

Item Number: 410137-0168-370

ZEN Toolkit 2D for ZEN desk Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizardprovides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally toclassical segmentationmethods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. Afterrunning the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belongingto the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-360

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-360

ZEN Toolkit Bio Apps Floating License Image analysis for standard life science applications. The package contains a collection of Bio Apps that allow users to analyze images from standard life science applications in a simple and user-friendly way.The package includes Bio Appsfor cell counting, confluence measurement, gene- and protein expression, and automated spot detection, and is particularly suitable for analyzing experiments on multiwell plates. All Bio Apps are "AI-ready" and allow the use ofmachine learning models forimage segmentation. The analysis results are presented in interactive measurement tables and various plots. - Simple setup tailored to the specific application - Selection between fast classical segmentation or machine learning (AI) - Predefined parameters enhance ease-of-use - Dedicated and interactive result display (table, heatmap, timeseries, xy-scatterplot, histogram) - Simple export of results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: The use of AI segmentation requires an installation of ZeissPython. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Deconvolution Floating License

Recover

Item no.: 410136-2173-360

ZEN Toolkit Deconvolution Floating License

Item Number: 410136-2173-360

ZEN Toolkit Deconvolution Floating License Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 3D Floating License

Recover

Item no.: 410136-2172-360

ZEN Toolkit 3D Floating License

Item Number: 410136-2172-360

ZEN Toolkit 3D Floating License This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer Floating License

Recover

Item no.: 410136-2171-360

ZEN Toolkit Developer Floating License

Item Number: 410136-2171-360

ZEN Toolkit Developer Floating License Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Connect Floating License

Recover

Item no.: 410136-2170-360

ZEN Toolkit Connect Floating License

Item Number: 410136-2170-360

ZEN Toolkit Connect Floating License This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy* - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*motorized stage required) (**not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 2D Floating License

Recover

Item no.: 410136-2168-360

ZEN Toolkit 2D Floating License

Item Number: 410136-2168-360

ZEN Toolkit 2D Floating License Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze imagedata. The wizard provides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally to classical segmentation methods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. After running the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belonging to the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit GxP Floating License

Recover

Item no.: 410136-2163-350

ZEN Toolkit GxP Floating License

Item Number: 410136-2163-350

ZEN Toolkit GxP Floating License The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process Floating License allows the flexible usage of the license on different clients within a networkenvironment.

Item has been added to the configuration

ZEN Toolkit Materials Apps Floating License

Recover

Item no.: 410136-2162-350

ZEN Toolkit Materials Apps Floating License

Item Number: 410136-2162-350

ZEN Toolkit Materials Apps Floating License This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximumdiameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 63942002 - Non-metallic inclusions (NMI): ISO4967:2013; GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004 Floating License allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.5 Floating License

Recover

Item no.: 410135-2035-350

ZEN analyzer 3.5 Floating License

Item Number: 410135-2035-350

ZEN analyzer 3.5 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - APEER (on-site) connectorenables the execution of customized solutions by integrating modules from the APEER platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN starter basic software (O)

Recover

Item no.: 410135-1010-000

ZEN starter basic software (O)

Item Number: 410135-1010-000

ZEN starter basic software (O) ZEN starter with basic functionality and user interface of ZEN core. Drivers for Axiocam cameras and image acquisition (SNAPs). No microscope control. - Configurable graphical user interface including workbench concept - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - Panorama for acquisition of Tiles Images with manual stage - Online Panorama for creation of stitched images on un-coded/ un- motorized stages - Video recorder functionality with movie export functionality - Manual Extended Focus (EDF) capability - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements and text annotations - Using of Microsoft Word report templates - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - Can only be extended with ZEN Toolkit Basic Acquisition and ZEN Module Coded Microscope Differences compared with ZEN core: - No microscope control - Limited image processing functions - No Job functionality - No HDR -Acquisition of High Dynamic Range Images Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN 3.7 desk

Recover

Item no.: 410135-0004-370

ZEN 3.7 desk

Item Number: 410135-0004-370

ZEN 3.7 desk ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.7

Recover

Item no.: 410135-0002-370

ZEN 3.7

Item Number: 410135-0002-370

ZEN 3.7 Image acquisition and processing under Windows 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Connect basic - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN image processing modules

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-380

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-380

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-370

ZEN Toolkit Bio Apps

Item Number: 410136-0175-370

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps one, that fits your application and simply adapt the preconfigured Bio App to your data if necessary. Use fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models in the Bio Apps without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a DNN trained on apeer for semantic or instance segmentation in the BioApp. After analysis, the segmented images are displayed along with customized results tables and diagrams (e.g., heatmaps and scatterplots) so you can get a quick overview of your sample. At the same time, tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with Bio Apps tailored to specific applications - Available Bio Apps: Cell counting, confluency, gene- and protein expression and automated spot detection - Easy operation with predefined parameters - Choose between fast classical segmentation or more powerful AI-models: use AI models trained with the ZEN Toolkit AI or DNNs trained on apeer with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of Z Zeiss Python. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported.

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI 1 year license

Recover

Item no.: 410136-3169-380

ZEN Toolkit AI 1 year license

Item Number: 410136-3169-380

ZEN Toolkit AI 1 year license Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. License validity period: 1 year from date of activation

Item has been added to the configuration

ZEN Toolkit AI Floating License

Recover

Item no.: 410136-2169-380

ZEN Toolkit AI Floating License

Item Number: 410136-2169-380

ZEN Toolkit AI Floating License Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN andZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative toan own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. The floating license allows the flexible use of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer

Recover

Item no.: 410136-0171-360

ZEN Toolkit Developer

Item Number: 410136-0171-360

ZEN Toolkit Developer Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated workflows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core)

Item has been added to the configuration

ZEN Toolkit AI

Recover

Item no.: 410136-0169-380

ZEN Toolkit AI

Item Number: 410136-0169-380

ZEN Toolkit AI Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services.

Item has been added to the configuration

ZEN Toolkit GxP

Recover

Item no.: 410136-0163-350

ZEN Toolkit GxP

Item Number: 410136-0163-350

ZEN Toolkit GxP The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process.

Labscope modules

Item has been added to the configuration

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Recover

Item no.: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Item Number: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D) consisting of the camera Axiocam 305 color and the Labscope Module Fast Panorama. Camera specification: Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V(ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulationrequired Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or later, ZEN core v2.5 or later Labscope v3.3 or later (Windows) The required software is available via the ZEISS Download Center.

Item has been added to the configuration

Labscope Teacher 2.0

Recover

Item no.: 410135-0030-200

Labscope Teacher 2.0

Item Number: 410135-0030-200

Labscope Teacher 2.0 Labscope Teacher 2.0 is a licensed server SW for digital classroom management and interactive teaching and learning, it provides the following features: - Broadcast of teachers microscope view to students in real time - Chat function for text and emojis - Shared class folders for easy file sharing and storage - Students can use any iOS, Android or Windows device to participate in class - Teachers use a SW Labscope Teacher on a Windows device Note: The Labscope Teacher installation consists of two parts: the server part and the teacher client part. You can install both on the same PC/laptop or install the server part on a PC and the teacher client on a laptop. The licence must be activated viathe licence management tool on the server part of the PC/laptop. For the required PC specifications and other details, please refer to the product information or the Quick Installation Guide.

ZEN modules image recording

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-380

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-380

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN 3.9 desk floating license

Recover

Item no.: 410135-2004-390

ZEN 3.9 desk floating license

Item Number: 410135-2004-390

ZEN 3.9 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk floating license

Recover

Item no.: 410135-2004-380

ZEN 3.8 desk floating license

Item Number: 410135-2004-380

ZEN 3.8 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9 desk

Recover

Item no.: 410135-0004-390

ZEN 3.9 desk

Item Number: 410135-0004-390

ZEN 3.9 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk

Recover

Item no.: 410135-0004-380

ZEN 3.8 desk

Item Number: 410135-0004-380

ZEN 3.8 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9

Recover

Item no.: 410135-0002-390

ZEN 3.9

Item Number: 410135-0002-390

ZEN 3.9 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.8

Recover

Item no.: 410135-0002-380

ZEN 3.8

Item Number: 410135-0002-380

ZEN 3.8 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN drivers

Item has been added to the configuration

ZEN Software Driver Hamamatsu Cameras

Recover

Item no.: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras

Item Number: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras Driver for the use of Hamamatsu b/w cameras Orca Flash 4.0 V3 CL/USB3.0, Orca Flash LT USB3.0, Image EM X2 512, Image EM X2-1K, Orca Fusion

Item has been added to the configuration

ZEN desk (network license)

Recover

Item no.: 410135-2004-370

ZEN desk (network license)

Item Number: 410135-2004-370

ZEN desk (network license) ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

ZEN core base software

Item has been added to the configuration

ZEN analyzer 3.9 Floating License

Recover

Item no.: 410135-2035-390

ZEN analyzer 3.9 Floating License

Item Number: 410135-2035-390

ZEN analyzer 3.9 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.8 Floating License

Recover

Item no.: 410135-2035-380

ZEN analyzer 3.8 Floating License

Item Number: 410135-2035-380

ZEN analyzer 3.8 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.9

Recover

Item no.: 410135-0035-390

ZEN analyzer 3.9

Item Number: 410135-0035-390

ZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.8

Recover

Item no.: 410135-0035-380

ZEN analyzer 3.8

Item Number: 410135-0035-380

ZEN analyzer 3.8 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN core 3.9

Recover

Item no.: 410135-0011-390

ZEN core 3.9

Item Number: 410135-0011-390

ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN core 3.8

Recover

Item no.: 410135-0011-380

ZEN core 3.8

Item Number: 410135-0011-380

ZEN core 3.8 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Smartproof 5 and Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components. - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

arivis Vision4D software for image processing

Item has been added to the configuration

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Recover

Item no.: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Item Number: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN Desk 3.8 and arivis pro TL package (D)

Recover

Item no.: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package (D)

Item Number: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package Combined package of a ZEN desk base software and a two-year temporary license of arivis pro for 3D image visualization and data analysis to help researchers getting started with their image analysis. ZEN Desk: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. This arivis pro (TL) temporary license is valid for two years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact support-zeiss@arivis.com) with regular SW updates. The arivis pro (TL) package can only be sold together with a new microscopy system. After two years this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time (contact sales-zeiss@arivis.com).

Labscope - Basic Software

Item has been added to the configuration

Labscope 4.2 for Windows (O)

Recover

Item no.: 410135-0052-420

Labscope 4.2 for Windows (O)

Item Number: 410135-0052-420

Labscope 4.2 for Windows (O) Labscope for Windows is a software used to control and acquire images through connected and compatible microscopes. This combined system is used for in-vitro examination of images to obtain information about physiological orpathological processes or conditions. Labscope for Windows is intended for the use of professional users, among others in the field of life science, cytology and pathology. The connected microscopes are themselves CE-IVD products. For IVD examinations, ensure that the displayed image on the monitor shows the equivalent information as visible through the eyepieces of the microscope. Labscope AI modules "AI Cell Confluency" and "AI Cell Counting" are not intended for IVD examinations and may only beused in research. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Item has been added to the configuration

Labscope for iOS / Android (O)

Recover

Item no.: 410135-0052-100

Labscope for iOS / Android (O)

Item Number: 410135-0052-100

Labscope for iOS / Android (O) Labscope for iOS / Android is a microscope software used to control, image acquisition, image processing and image analysis. Typical application fields of the software are general tasks and applications in microscopy or image acquisition, among others for education, routine and research. The software is not intended to directly or indirectly produce medical diagnostic results. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Services (1)

Installation costs, etc.

Item has been added to the configuration

ZEN core NMI remote user-training (O)

Recover

Item no.: 000000-2468-538

ZEN core NMI remote user-training (O)

Item Number: 000000-2468-538

ZEN core NMI remote user-training (O) In this remote training supervisors and operators will get in-depth knowledge about and practice in: - ZEN Core NMI workflow - ZEN Core NMI multiple tile regions acquisition incl. focus correction - Segmentation and measurement - Artifact detection - Main deformation axis and specimen orientation - Global Results View with inclusion gallery and Field based View - Results statistics - Report template editing - Browse results: archived data, data export and Inclusion Inspection via archive - Introduction to NMI Online Help - Hardware maintenance and operation - Knowledge of standards and characteristic values - ZEN core basics Furthermore the trainer sets up basic parameters in the ZEN workflow and defines a standard template with inclusion segmentation, artifact detection and severity rating filter per standard in agreement with the customer. Duration of remote-session: 8h

Packing and dust protection (1)

Dust covers

Item has been added to the configuration

Dust protection set for Axiovert

Recover

Item no.: 434308-9010-000

Dust protection set for Axiovert

Item Number: 434308-9010-000

Dust protection set for Axiovert - dust cover (L650xW200xH570 mm) - eyepiece cover

Inverted microscope Axiovert 5 TL for transmitted-light brightfield and phase contrast Ph1