Stemi Mount Column 32 with Drive - Lifting range +/- 25 mm, load capacity max. 5 kg - 2x M8 thread for adaptation of illuminator carriers - Adjustable ease of motion by twisting the knobs
项目编号:
435424-9301-000
SteREO Discovery.V12 microscope body
SteREO Discovery.V12 microscope body
项目编号:
435001-9901-000
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular tube S 20°
Binocular tube S 20°
项目编号:
435104-9901-000
Binocular tube S 20° for 51-75mm eye distance
项目编号:
435104-9901-000
Objective Achromat S 0.63x FWD 107 mm
Objective Achromat S 0.63x FWD 107 mm
项目编号:
435216-9901-000
Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length)
项目编号:
435216-9901-000
Intermediate tube S, fixed 40 mm
Intermediate tube S, fixed 40 mm
项目编号:
435102-0000-000
Intermediate tube S, fixed 40 mm to increase the viewing height
项目编号:
435102-0000-000
Stand N with Column 32/450 mm
Stand N with Column 32/450 mm
项目编号:
435424-9400-000
Stand base N with stand column 32/450 mm - Stand base 440x370 mm - B/W plastic plate D=84x4 mm - 2 stage clips, safety ring
Stemi Mount Column 32 with Drive - Lifting range +/- 25 mm, load capacity max. 5 kg - 2x M8 thread for adaptation of illuminator carriers - Adjustable ease of motion by twisting the knobs
项目编号:
435424-9301-000
SteREO Discovery.V12 microscope body
SteREO Discovery.V12 microscope body
项目编号:
435001-9901-000
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Achromat S 0.5x FWD 134 mm
Objective Achromat S 0.5x FWD 134 mm
项目编号:
435215-9901-000
Objective Achromat S 0.5x FWD 134 mm (164 mm transfer length)
项目编号:
435215-9901-000
Stand base SDA (D)
Stand base SDA (D)
项目编号:
435412-0000-000
Stand base for stand SDA - Dimensions 350x350x50 mm, weight 30 kg - With rubber feet, 2 recessed grips, central borehole for screwing the vertical stand column SDA 40/610
项目编号:
435412-0000-000
Double Boom SDA (D)
Double Boom SDA (D)
项目编号:
435411-0000-000
Double boom for stand SDA Dimensions 670x200x170 mm, load capacity max. 8 kg With integrated tilt-/swivelling head with column 32/200 mm. Also included: vertical stand column SDA 40/610 mm with mounting screw M16. The double extension arm can be rotated 360° around the vertical stand column. Boom length 360-690 mm (center of vertical column to optical axis of stereo microscope carrier - microscope carrier not included)
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Intermediate tube S, fixed 40 mm
Intermediate tube S, fixed 40 mm
项目编号:
435102-0000-000
Intermediate tube S, fixed 40 mm to increase the viewing height
项目编号:
435102-0000-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Intermediate tube S, fixed 40 mm
Intermediate tube S, fixed 40 mm
项目编号:
435102-0000-000
Intermediate tube S, fixed 40 mm to increase the viewing height
项目编号:
435102-0000-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Intermediate tube S, fixed 40 mm
Intermediate tube S, fixed 40 mm
项目编号:
435102-0000-000
Intermediate tube S, fixed 40 mm to increase the viewing height
项目编号:
435102-0000-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
项目编号:
435402-0000-000
VisiLED ring light S 80-55 BF, d=66 mm (D)
VisiLED ring light S 80-55 BF, d=66 mm (D)
项目编号:
417095-9255-000
VisiLED ring light S 80-55 BF, d=66 mm (D) for bright field, working distance 45...95 mm
项目编号:
417095-9255-000
Set for simultanous fixing (D)
Set for simultanous fixing (D)
项目编号:
417095-9500-000
Set for simultanous fixing (D) for VisiLED BF+DF to objectives S with FWD 40...100 mm
项目编号:
417095-9500-000
VisiLED ring light S 40-10 DF (D)
VisiLED ring light S 40-10 DF (D)
项目编号:
417095-9300-000
VisiLED ring light S 40-10 DF (D) for dark field, working distance 5...15 mm
项目编号:
417095-9300-000
Multiple Controller MC 1500 for VisiLED (D)
Multiple Controller MC 1500 for VisiLED (D)
项目编号:
417095-9000-000
Multiple Controller MC 1500 for VisiLED (D) for 2 VisiLED illuminators, foot switch and RS232 adapter, with 5 segment modes, 4 memory keys, continuous dimming and integrated LED temperature control
项目编号:
417095-9000-000
Foot button S (D)
Foot button S (D)
项目编号:
417095-9020-000
Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300
项目编号:
417095-9020-000
Power supply 100...240V, 50...60Hz (D)
Power supply 100...240V, 50...60Hz (D)
项目编号:
417095-9050-000
Power supply 100...240V, 50...60Hz (D) for VisiLED
项目编号:
417095-9050-000
Gliding stage S 110x110, d=120 mm
Gliding stage S 110x110, d=120 mm
项目编号:
435461-0000-000
Gliding stage S 110x110, d=120 mm 3-plates stage 267x152x32mm With x-y ball tracks and glass plate 116x116mm; useable with transillumination Interface d=120mm for stand base 300/450
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Plan Apo S 1.0x FWD 60 mm
Objective Plan Apo S 1.0x FWD 60 mm
项目编号:
435203-0000-000
Objective Plan Apo S 1.0x FWD 60 mm (137 mm parfocal length)
项目编号:
435203-0000-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
项目编号:
435402-0000-000
Cable EMS3/CMD - focus motor 3
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Coaxial epi-illumination S
Coaxial epi-illumination S
项目编号:
435112-0000-000
Coaxial epi-illumination S mountable at mount S with diam. 76 mm support (435402), recommended for objective Plan Apo S 1,0x (435203), further combinations of objectives S >=1,0x and eyepieces possible
项目编号:
435112-0000-000
Foot pedal S
Foot pedal S
项目编号:
435602-0000-000
Foot pedal S for SYCOP for the continuous control of a microscope parameter at option
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular ergo tube S 1.25x 5-45°
Binocular ergo tube S 1.25x 5-45°
项目编号:
435103-9050-000
Binocular ergo tube S 1.25x 5-45° for 55-75mm eye distance and with eyepiece tubes which are 94 mm longer than those of ergo tube 435100 or 435103-9010; especially for Discovery.V8/V12 used in flow boxes or for an upright posture of the observer
项目编号:
435103-9050-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Objective Achromat S 0.63x FWD 107 mm
Objective Achromat S 0.63x FWD 107 mm
项目编号:
435216-9901-000
Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length)
项目编号:
435216-9901-000
Intermediate Y-tube S mot
Intermediate Y-tube S mot
项目编号:
435103-9030-000
Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m
项目编号:
435103-9030-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Coarse/fine drive with column S 490mm
Coarse/fine drive with column S 490mm
项目编号:
435400-9901-000
Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450
项目编号:
435400-9901-000
Illuminator carrier S, M8-M8 (D)
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Foot button S (D)
Foot button S (D)
项目编号:
417095-9020-000
Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300
项目编号:
417095-9020-000
Gliding stage S 110x110, d=120 mm
Gliding stage S 110x110, d=120 mm
项目编号:
435461-0000-000
Gliding stage S 110x110, d=120 mm 3-plates stage 267x152x32mm With x-y ball tracks and glass plate 116x116mm; useable with transillumination Interface d=120mm for stand base 300/450
项目编号:
435461-0000-000
Objective nosepiece S, coax 3x2 cod
Objective nosepiece S, coax 3x2 cod
项目编号:
435303-9000-000
Objective nosepiece S, coax 3x2 cod for stereo and axial mode with 3 objectives on SteREO Discovery, switchable coaxial epi-illumination incl. light guide 1500, 2x 4.5/1000mm, to mount at focus drive with profile column as an alternative of 435402 carrier S or 435116 co-observer equipment
项目编号:
435303-9000-000
Power supply plug CAN RJ45 DC 24V 30W (D)
Power supply plug CAN RJ45 DC 24V 30W (D)
项目编号:
000000-0514-784
Power supply plug CAN RJ45 DC 24V 30W (D) for power supply of any coupled CAN items S; incl. mains input plug EU, GB, USA/J, AUS in cardboard box
项目编号:
000000-0514-784
Intermediate phototube S, right 50:50/0:100/100:0
Intermediate phototube S, right 50:50/0:100/100:0
项目编号:
435103-9000-000
Intermediate phototube S, right 50:50/0:100/100:0 provides together with binocular tube S in stereo mode: - stereo observation by 50% of brightness and 50% from right channel to camera simultaneously or - 100% from right channel to camera and 100% from left channel to left eye or - 0% to camera and stereo observation by 100% of brightness
项目编号:
435103-9000-000
Lambda/4 Cap S, d=66 mm
Lambda/4 Cap S, d=66 mm
项目编号:
435112-9010-000
Lambda/4 Cap S, d=66 mm for objectives S or Z, D=66 mm, reduces FWD by 7 mm; required to coaxial epi-illuminator S working in axial mode or to Epi-illuminator Z if specular samples are existing
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular phototube S 20°
Binocular phototube S 20°
项目编号:
435107-0000-000
Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435107-0000-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Coarse/fine drive with column S 490mm
Coarse/fine drive with column S 490mm
项目编号:
435400-9901-000
Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450
项目编号:
435400-9901-000
High Power LED Ring Illuminator, segmentable (HPRL) (D)
High Power LED Ring Illuminator, segmentable (HPRL) (D)
项目编号:
417040-9300-000
High Power LED Ring Illuminator, segmentable (HPRL) (D) - 8 High Power LEDs with ring optics, optics mountable for near- or far WD range - Near WD range position: FWD 45-130 mm, Illuminance typ. 220 klx (@ FWD 50 mm) - Far WD range position: FWD 80-300 mm, Illuminance typ. 170 klx (@ FWD 90 mm) - Correlated color temperature ca. 5800 K, lifetime ca. 25.000 h (lumen maintenance 70 %) - Ergonomic operation integrated in housing: no controller box needed - Encoder 1 for setting of segment modes, turning in 45° steps and auto rotation - Encoder 2 for dimming, storage and recall of one illumination setting - Separate On/Off switch - Segment modes: full, half, quarter circle, two opposite quarter circles - Interface to objective: D=66 mm - ESD socket for controlled discharge of electrostatic load - Thread to mount accessories (Polarization Filter Set, Diffusor) - incl. wide-range power supply and 4 adapters EU, US, CH, JP
项目编号:
417040-9300-000
Intermediate LED tube S, 38HE GFP
Intermediate LED tube S, 38HE GFP
项目编号:
435123-9381-000
Intermediate LED tube S, 38HE GFP Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 38HE (EX BP 470/40, BS FT 495, EM BP 525/50), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24 V 30 W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m
项目编号:
435123-9381-000
Intermediate LED tube S, 69 FITC
Intermediate LED tube S, 69 FITC
项目编号:
435123-9691-000
Intermediate LED tube S, 69 FITC Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 69 (EX BP 470/35, BS FT 499, EM 560/100), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24 V 30 W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular phototube S 20°
Binocular phototube S 20°
项目编号:
435107-0000-000
Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435107-0000-000
Objective Plan S 1.0x FWD 81 mm
Objective Plan S 1.0x FWD 81 mm
项目编号:
435200-0000-000
Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
项目编号:
435200-0000-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
项目编号:
435402-0000-000
Coarse/fine drive with column S 490mm
Coarse/fine drive with column S 490mm
项目编号:
435400-9901-000
Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450
项目编号:
435400-9901-000
Focusing attachment d=6 mm without filters
Focusing attachment d=6 mm without filters
项目编号:
435540-9003-000
Focusing attachment d=6 mm without filters
项目编号:
435540-9003-000
Illuminator carrier S, M8-M8 (D)
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Spacing rod S
Spacing rod S
项目编号:
435440-0000-000
Spacing rod S
项目编号:
435440-0000-000
Foot button S (D)
Foot button S (D)
项目编号:
417095-9020-000
Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300
项目编号:
417095-9020-000
Filter cube 43 Cy3/Rhod/RFP (D)
Filter cube 43 Cy3/Rhod/RFP (D)
项目编号:
435115-5043-000
Filter cube 43 Cy3/Rhod/RFP (D) EX BP 545/25, BS FT 565, EM BP 606/70
项目编号:
435115-5043-000
Filter cube 38 GFP BP (D)
Filter cube 38 GFP BP (D)
项目编号:
435115-5038-000
Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50
项目编号:
435115-5038-000
PentaFluar S 120 vertical illuminator (D)
PentaFluar S 120 vertical illuminator (D)
项目编号:
435115-0000-000
PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Manual Rotary Control MARC
Manual Rotary Control MARC
项目编号:
435604-0000-000
Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m
项目编号:
435604-0000-000
Binocular phototube S 20°
Binocular phototube S 20°
项目编号:
435107-0000-000
Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435107-0000-000
Objective Plan Apo S 1.5x FWD 30 mm
Objective Plan Apo S 1.5x FWD 30 mm
项目编号:
435226-0000-000
Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length)
项目编号:
435226-0000-000
Objective Plan Apo S 1.0x FWD 60 mm
Objective Plan Apo S 1.0x FWD 60 mm
项目编号:
435203-0000-000
Objective Plan Apo S 1.0x FWD 60 mm (137 mm parfocal length)
项目编号:
435203-0000-000
Objective Achromat S 0.63x FWD 107 mm
Objective Achromat S 0.63x FWD 107 mm
项目编号:
435216-9901-000
Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length)
项目编号:
435216-9901-000
Intermediate Y-tube S mot
Intermediate Y-tube S mot
项目编号:
435103-9030-000
Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m
项目编号:
435103-9030-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
VisiLED slim ring light S BF, d=66mm (D)
VisiLED slim ring light S BF, d=66mm (D)
项目编号:
417095-9150-000
VisiLED slim ring light S BF, d=66mm (D) incl. 2 focus rings: - f50 ring lens with FWD 40-90mm and - f25 ring mirror with FWD 20-40 mm; - 2 pcs. ring illuminator are mountable side by side at - objective nosepiece of SteREO Discovery or Axio Zoom
项目编号:
417095-9150-000
Spacing ring S, d=66 x 40 mm
Spacing ring S, d=66 x 40 mm
项目编号:
435449-0000-000
Spacing ring S, d=66 x 40 mm elongates the diam. 66 mm objective barrel by 40 mm, e.g. for mounting of dark-field ring illuminator on Discovery objective Achromat 1x or 1.25x or Plan Apo 1x or twice used on Achromat 0.63x
项目编号:
435449-0000-000
Dark-field ring for slim VisiLED (D)
Dark-field ring for slim VisiLED (D)
项目编号:
417095-9810-000
Ring mirror f10 for VisiLED Slim (D) FWD 5-20 mm for gray and dark field, suited as incident illumination for objectives 2.3x
项目编号:
417095-9810-000
Multiple Controller MC 1500 for VisiLED (D)
Multiple Controller MC 1500 for VisiLED (D)
项目编号:
417095-9000-000
Multiple Controller MC 1500 for VisiLED (D) for 2 VisiLED illuminators, foot switch and RS232 adapter, with 5 segment modes, 4 memory keys, continuous dimming and integrated LED temperature control
项目编号:
417095-9000-000
Power supply 100...240V, 50...60Hz (D)
Power supply 100...240V, 50...60Hz (D)
项目编号:
417095-9050-000
Power supply 100...240V, 50...60Hz (D) for VisiLED
项目编号:
417095-9050-000
Foot button S (D)
Foot button S (D)
项目编号:
417095-9020-000
Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300
项目编号:
417095-9020-000
Mechanical stage S 150x100 R (D)
Mechanical stage S 150x100 R (D)
项目编号:
435465-9010-000
Mechanical stage S 150x100 R (D) 3-plates mechanical stage 322x251x28 mm for max. load 3 kg; with horizontal coaxial drive 115 mm right, interface d=120 mm and 237x157 mm support for insert plate S; useable with transillumination
项目编号:
435465-9010-000
Objective nosepiece S, coax 3x2 cod
Objective nosepiece S, coax 3x2 cod
项目编号:
435303-9000-000
Objective nosepiece S, coax 3x2 cod for stereo and axial mode with 3 objectives on SteREO Discovery, switchable coaxial epi-illumination incl. light guide 1500, 2x 4.5/1000mm, to mount at focus drive with profile column as an alternative of 435402 carrier S or 435116 co-observer equipment
项目编号:
435303-9000-000
Power supply plug CAN RJ45 DC 24V 30W (D)
Power supply plug CAN RJ45 DC 24V 30W (D)
项目编号:
000000-0514-784
Power supply plug CAN RJ45 DC 24V 30W (D) for power supply of any coupled CAN items S; incl. mains input plug EU, GB, USA/J, AUS in cardboard box
项目编号:
000000-0514-784
Lambda/4 Cap S, d=66 mm
Lambda/4 Cap S, d=66 mm
项目编号:
435112-9010-000
Lambda/4 Cap S, d=66 mm for objectives S or Z, D=66 mm, reduces FWD by 7 mm; required to coaxial epi-illuminator S working in axial mode or to Epi-illuminator Z if specular samples are existing
项目编号:
435112-9010-000
Insert plate S, metal 237x157x3mm (D)
Insert plate S, metal 237x157x3mm (D)
项目编号:
435465-9052-000
Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Achromat S 1.0x FWD 63 mm
Objective Achromat S 1.0x FWD 63 mm
项目编号:
435217-9901-000
Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length)
项目编号:
435217-9901-000
Objective Achromat S 1.5x FWD 28 mm
Objective Achromat S 1.5x FWD 28 mm
项目编号:
435228-9901-000
Objective Achromat S 1.5x FWD 28 mm (93 mm parfocal length)
项目编号:
435228-9901-000
Objective Plan Apo S 3.5x mono FWD 16 mm
Objective Plan Apo S 3.5x mono FWD 16 mm
项目编号:
435250-0000-000
Objective Plan Apo S 3.5x mono FWD 16 mm for vertical 2D imaging on SteREO Discovery, mountable at nosepiece 6x cod by 435306-9000 or at objective slider S/doc by 435304
项目编号:
435250-0000-000
Intermediate Y-tube S, switchable
Intermediate Y-tube S, switchable
项目编号:
435117-0000-000
Intermediate Y-tube S, switchable switching by push rod between stereoscopic viewing (3D) and binocular vertical viewing (2D) through right channel of Discovery body with 435301 objective slider S/doc or 435302 or 435303-9000 nosepiece S/doc
项目编号:
435117-0000-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Cable EMS3/CMD - focus motor 3
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Illuminator carrier S, M8-M8 (D)
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Spacing ring M62, d=66x16 mm
Spacing ring M62, d=66x16 mm
项目编号:
435307-0000-000
Spacing ring M62, d=66x16 mm required with 435506 ring illuminator and PlanApo Z 0.5x or Achromat S 0.3x/0.5x/0.63x/1.0x in -9901 version with M62
项目编号:
435307-0000-000
Gliding stage S 110x110, d=120 mm
Gliding stage S 110x110, d=120 mm
项目编号:
435461-0000-000
Gliding stage S 110x110, d=120 mm 3-plates stage 267x152x32mm With x-y ball tracks and glass plate 116x116mm; useable with transillumination Interface d=120mm for stand base 300/450
项目编号:
435461-0000-000
Objective nosepiece S/doc, 3fold, 6x cod
Objective nosepiece S/doc, 3fold, 6x cod
项目编号:
435302-0000-000
Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment
项目编号:
435302-0000-000
Rings for nosepiece 6x cod + objective mono
Rings for nosepiece 6x cod + objective mono
项目编号:
435306-9000-000
Rings for nosepiece 6x cod + objective mono M40/M60 ring provides parfocality of Plan Apo S 3.5x mono with Achromat S 1.0x / 1.25x / 1.5x on nosepiece and the d=66x45 mm sleeve supports d=66 mm accessories
项目编号:
435306-9000-000
PentaFluar S 120 vertical illuminator (D)
PentaFluar S 120 vertical illuminator (D)
项目编号:
435115-0000-000
PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator
项目编号:
435115-0000-000
Filter cube 38 GFP BP (D)
Filter cube 38 GFP BP (D)
项目编号:
435115-5038-000
Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50
项目编号:
435115-5038-000
Filter cube 120 UV/DAPI LP (D)
Filter cube 120 UV/DAPI LP (D)
项目编号:
435115-5120-000
Filter cube 120 UV/DAPI LP (D) EX BP 375/28, BS FT 415, EM LP 435
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
Binocular ergo phototube S 5-45°
Binocular ergo phototube S 5-45°
项目编号:
435100-0000-000
Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435100-0000-000
Objective Achromat S 1.0x FWD 63 mm
Objective Achromat S 1.0x FWD 63 mm
项目编号:
435217-9901-000
Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length)
项目编号:
435217-9901-000
Objective Achromat S 1.5x FWD 28 mm
Objective Achromat S 1.5x FWD 28 mm
项目编号:
435228-9901-000
Objective Achromat S 1.5x FWD 28 mm (93 mm parfocal length)
项目编号:
435228-9901-000
Objective Plan Apo S 3.5x mono FWD 16 mm
Objective Plan Apo S 3.5x mono FWD 16 mm
项目编号:
435250-0000-000
Objective Plan Apo S 3.5x mono FWD 16 mm for vertical 2D imaging on SteREO Discovery, mountable at nosepiece 6x cod by 435306-9000 or at objective slider S/doc by 435304
项目编号:
435250-0000-000
Intermediate Y-tube S mot
Intermediate Y-tube S mot
项目编号:
435103-9030-000
Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m
项目编号:
435103-9030-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Cable EMS3/CMD - focus motor 3
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Spacing ring M62, d=66x16 mm
Spacing ring M62, d=66x16 mm
项目编号:
435307-0000-000
Spacing ring M62, d=66x16 mm required with 435506 ring illuminator and PlanApo Z 0.5x or Achromat S 0.3x/0.5x/0.63x/1.0x in -9901 version with M62
项目编号:
435307-0000-000
Foot button S (D)
Foot button S (D)
项目编号:
417095-9020-000
Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300
项目编号:
417095-9020-000
Illuminator carrier S, M8-M8 (D)
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Illuminator carrier S, M8-M8 (D)
项目编号:
435441-0000-000
Gliding stage S 110x110, d=120 mm
Gliding stage S 110x110, d=120 mm
项目编号:
435461-0000-000
Gliding stage S 110x110, d=120 mm 3-plates stage 267x152x32mm With x-y ball tracks and glass plate 116x116mm; useable with transillumination Interface d=120mm for stand base 300/450
项目编号:
435461-0000-000
Objective nosepiece S/doc, 3fold, 6x cod
Objective nosepiece S/doc, 3fold, 6x cod
项目编号:
435302-0000-000
Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment
项目编号:
435302-0000-000
Rings for nosepiece 6x cod + objective mono
Rings for nosepiece 6x cod + objective mono
项目编号:
435306-9000-000
Rings for nosepiece 6x cod + objective mono M40/M60 ring provides parfocality of Plan Apo S 3.5x mono with Achromat S 1.0x / 1.25x / 1.5x on nosepiece and the d=66x45 mm sleeve supports d=66 mm accessories
项目编号:
435306-9000-000
Filter cube 43 Cy3/Rhod/RFP (D)
Filter cube 43 Cy3/Rhod/RFP (D)
项目编号:
435115-5043-000
Filter cube 43 Cy3/Rhod/RFP (D) EX BP 545/25, BS FT 565, EM BP 606/70
项目编号:
435115-5043-000
Filter cube 38 GFP BP (D)
Filter cube 38 GFP BP (D)
项目编号:
435115-5038-000
Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50
项目编号:
435115-5038-000
Filter cube 120 UV/DAPI LP (D)
Filter cube 120 UV/DAPI LP (D)
项目编号:
435115-5120-000
Filter cube 120 UV/DAPI LP (D) EX BP 375/28, BS FT 415, EM LP 435
项目编号:
435115-5120-000
PentaFluar S 120 vertical illuminator (D)
PentaFluar S 120 vertical illuminator (D)
项目编号:
435115-0000-000
PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Binocular phototube S 20°
Binocular phototube S 20°
项目编号:
435107-0000-000
Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
项目编号:
435107-0000-000
Objective Achromat S 1.0x FWD 63 mm
Objective Achromat S 1.0x FWD 63 mm
项目编号:
435217-9901-000
Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length)
项目编号:
435217-9901-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Mount S with diam. 76 mm support
Mount S with diam. 76 mm support
项目编号:
435402-0000-000
Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns
项目编号:
435402-0000-000
Cable EMS3/CMD - focus motor 3
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Measuring stage S 150x100 mot; CAN (D)
Measuring stage S 150x100 mot; CAN (D)
项目编号:
435465-9020-000
Measuring stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors, encoders and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 1µm - absolute accuracy +/- 2µm - interface d=120mm, BNC trigger and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination
项目编号:
435465-9020-000
Objective slider S /doc (D)
Objective slider S /doc (D)
项目编号:
435301-0000-000
Objective slider S /doc (D) on SteREO Discovery for vertical imaging through right (axial mode) or left channel with one tandem mono or one stereo objective and for stereo observation with last mentioned one in central position of slider
项目编号:
435301-0000-000
Adapter frame S 160x116 epi-illumination (D)
Adapter frame S 160x116 epi-illumination (D)
项目编号:
435465-9050-000
Adapter frame S 160x116 epi-illumination (D) holding frames and plates 160x116 of Axio Imager are adapted to stages S 150x100, using together with transillumination top 450 mot (435500-9000) is not allowed
项目编号:
435465-9050-000
Polarization filter set S, d=66 mm (D)
Polarization filter set S, d=66 mm (D)
项目编号:
417075-9009-000
Polarization filter set S, d=66 mm (D) consisting of fixed analyzer and rotary, annular polarizer
Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
项目编号:
435001-9901-000
System Control Panel SYCOP 3
System Control Panel SYCOP 3
项目编号:
435611-9010-000
System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3
项目编号:
435611-9010-000
Manual Rotary Control MARC
Manual Rotary Control MARC
项目编号:
435604-0000-000
Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m
项目编号:
435604-0000-000
Controller EMS 3
Controller EMS 3
项目编号:
435610-9012-000
Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable
项目编号:
435610-9012-000
Human Interface Panel HIP
Human Interface Panel HIP
项目编号:
435601-0000-000
Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
项目编号:
435601-0000-000
Binocular tube S 20°
Binocular tube S 20°
项目编号:
435104-9901-000
Binocular tube S 20° for 51-75mm eye distance
项目编号:
435104-9901-000
Objective Plan Apo S 1.5x FWD 30 mm
Objective Plan Apo S 1.5x FWD 30 mm
项目编号:
435226-0000-000
Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length)
项目编号:
435226-0000-000
Motor focus 3 with column S 490mm
Motor focus 3 with column S 490mm
项目编号:
435403-9001-000
Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. - Interface to mount a HIP operation unit. - Lifting range 340 mm, load capacity 18 kg
项目编号:
435403-9001-000
Stand base 450
Stand base 450
项目编号:
435430-9903-000
Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010)
项目编号:
435430-9903-000
Cable EMS3/CMD - focus motor 3
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Cable EMS3/CMD - focus motor 3
项目编号:
435403-9030-000
Measuring stage S 150x100 mot; CAN (D)
Measuring stage S 150x100 mot; CAN (D)
项目编号:
435465-9020-000
Measuring stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors, encoders and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 1µm - absolute accuracy +/- 2µm - interface d=120mm, BNC trigger and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination
项目编号:
435465-9020-000
Objective nosepiece S/doc, 3fold, 6x cod
Objective nosepiece S/doc, 3fold, 6x cod
项目编号:
435302-0000-000
Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment
项目编号:
435302-0000-000
Insert plate S, metal 237x157x3mm (D)
Insert plate S, metal 237x157x3mm (D)
项目编号:
435465-9052-000
Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100
项目编号:
435465-9052-000
Adapter frame S 160x116 epi-illumination (D)
Adapter frame S 160x116 epi-illumination (D)
项目编号:
435465-9050-000
Adapter frame S 160x116 epi-illumination (D) holding frames and plates 160x116 of Axio Imager are adapted to stages S 150x100, using together with transillumination top 450 mot (435500-9000) is not allowed
项目编号:
435465-9050-000
Intermediate phototube S mot, right 100/100
Intermediate phototube S mot, right 100/100
项目编号:
435118-0000-000
Intermediate phototube S mot, right 100/100 motorized alternation per CAN command or push button between 100% light for camera or 100% for right eye; power supply by CAN distributor or plug-in supply RJ45-CAN via its 2 sockets; incl. 2 cables 0.5m and 1m
Flexible light guide, 2 branches 4.5/1000 mm (D) for KL 1500 / 2500
项目编号:
417075-9004-000
Cold-light source CL 9000 LED CAN (D)
Cold-light source CL 9000 LED CAN (D)
项目编号:
435700-9000-000
Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg
Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg
项目编号:
435700-9101-000
Clamp S to light guide (D)
Clamp S to light guide (D)
项目编号:
435442-0000-000
Clamp S to light guide (D)
项目编号:
435442-0000-000
Flexible light guide, 2 branches 4.5/1000 mm (D)
Flexible light guide, 2 branches 4.5/1000 mm (D)
项目编号:
417075-9004-000
Flexible light guide, 2 branches 4.5/1000 mm (D) for KL 1500 / 2500
项目编号:
417075-9004-000
Illuminator HXP 120 V (D)
Illuminator HXP 120 V (D)
项目编号:
423013-9010-000
Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg
Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
项目编号:
435700-9000-000
Clamp S to light guide (D)
Clamp S to light guide (D)
项目编号:
435442-0000-000
Clamp S to light guide (D)
项目编号:
435442-0000-000
Flexible light guide 1500, 8/1000 mm (D)
Flexible light guide 1500, 8/1000 mm (D)
项目编号:
417063-9901-000
Flexible light guide 1500, 8/1000 mm (D)
项目编号:
417063-9901-000
Illuminator HXP 120 V (D)
Illuminator HXP 120 V (D)
项目编号:
423013-9010-000
Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
项目编号:
423013-9010-000
Shutter remote control for HXP 120 V
Shutter remote control for HXP 120 V
项目编号:
000000-0544-644
Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.
项目编号:
000000-0544-644
Day Light Filter CL LED (D)
Day Light Filter CL LED (D)
项目编号:
435700-9021-000
Day Light Filter CL LED (D)
项目编号:
435700-9021-000
Slit-ring illuminator d=66 mm without light guide (D)
Slit-ring illuminator d=66 mm without light guide (D)
项目编号:
435506-0000-000
Slit-ring illuminator d=66 mm without light guide (D) useable with 417063-9901 light guide 8/1000mm and objective nosepiece S/doc 435302 or Z 435380-9000
项目编号:
435506-0000-000
Light-conducting rod 13 mm (D)
Light-conducting rod 13 mm (D)
项目编号:
435511-0000-000
Light-conducting rod 13 mm (D) required with 435506 ring illuminator and Plan Apo Z 0.5x / S 1.0x / S 3.5x mono or Achromat S 1.5x or PlanNeoFluar Z 1.0x, to that 2 light-conducting rods are required
Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
项目编号:
435700-9000-000
Clamp S to light guide (D)
Clamp S to light guide (D)
项目编号:
435442-0000-000
Clamp S to light guide (D)
项目编号:
435442-0000-000
Flexible light guide 1500, 8/1000 mm (D)
Flexible light guide 1500, 8/1000 mm (D)
项目编号:
417063-9901-000
Flexible light guide 1500, 8/1000 mm (D)
项目编号:
417063-9901-000
Illuminator HXP 120 V (D)
Illuminator HXP 120 V (D)
项目编号:
423013-9010-000
Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.
项目编号:
423013-9010-000
Shutter remote control for HXP 120 V
Shutter remote control for HXP 120 V
项目编号:
000000-0544-644
Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.
项目编号:
000000-0544-644
Slit-ring illuminator d=66 mm without light guide (D)
Slit-ring illuminator d=66 mm without light guide (D)
项目编号:
435506-0000-000
Slit-ring illuminator d=66 mm without light guide (D) useable with 417063-9901 light guide 8/1000mm and objective nosepiece S/doc 435302 or Z 435380-9000
项目编号:
435506-0000-000
Light-conducting rod 13 mm (D)
Light-conducting rod 13 mm (D)
项目编号:
435511-0000-000
Light-conducting rod 13 mm (D) required with 435506 ring illuminator and Plan Apo Z 0.5x / S 1.0x / S 3.5x mono or Achromat S 1.5x or PlanNeoFluar Z 1.0x, to that 2 light-conducting rods are required
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
项目编号:
435540-9005-000
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
项目编号:
435540-9005-000
Cold-light source CL 9000 LED CAN (D)
Cold-light source CL 9000 LED CAN (D)
项目编号:
435700-9000-000
Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg
项目编号:
435700-9000-000
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
项目编号:
435540-9005-000
Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)
Lamp HXP 120, spare mercury short-arc lamp for Illuminator HXP 120 Photometric data: - 4600 lm (typical values for new lamps) - broad spectral range from UV to VIS - average lifetime 2000 hrs.
Lamp HXP 120, spare mercury short-arc lamp for Illuminator HXP 120 Photometric data: - 4600 lm (typical values for new lamps) - broad spectral range from UV to VIS - average lifetime 2000 hrs.
Lamp HXP 120, spare mercury short-arc lamp for Illuminator HXP 120 Photometric data: - 4600 lm (typical values for new lamps) - broad spectral range from UV to VIS - average lifetime 2000 hrs.
Holder TCA for filter membrane, DM 47 (D) Holder for filter membrane, diameter 47 mm. Accessory for analysis of particulate contamination on filter membranes.
项目编号:
432320-9902-000
Mounting frame for one holder TCA (D)
Mounting frame for one holder TCA (D)
项目编号:
432321-9902-000
Mounting frame for one holder TCA (D) The mounting frame is accessory for technical cleanliness and applicable for: - holder TCA for filter membranes with diameter 47 mm; - holder TCA for filter membranes with diameter 50 mm; - holder TCA for the test standard.
Adapter plate CorrMic with SEM interface; 160x116 (D)
Adapter plate CorrMic with SEM interface; 160x116 (D)
项目编号:
432335-9181-000
Adapter plate CorrMic with SEM interface; 160x116 (D) - for mounting of specimen holders CorrMic MAT with SEM adapter - plate size 160x116
项目编号:
432335-9181-000
Specimen holder CorrMic MAT Universal B Rev.2 (D)
Specimen holder CorrMic MAT Universal B Rev.2 (D)
项目编号:
432335-9102-000
Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage
Joystick XY; CAN for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009
Microscopy Workstation Compact HP Z2 G1i HP Z2 Tower G1i Workstation - Chipset: Intel W880 - Memory Expansion Slots: 4 x DDR5-RAM modules, 5600 MHz - Memory: max. 192 GB RAM (at launch) / 256 GB RAM (later) - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCI Express Generation 4 x4 (x16 connector) 1x PCI Express Generation 4 x4 1x PCI Express Generation 4 x1 (x4 connector) - Graphics card onboard: Intel Graphics, 2 x Display Port 2.1 (max. 3840 x 2160 Pixel) - SSD: 1 x 1 TB M.2 NVMe - Hard disks: 1 x 12 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-C SuperSpeed USB 20 Gbps (front) 3 x Type-A Hi-Speed USB 480 Mbps, 2 x Type-ASuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - TPM: BIOS selectable, default off - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 388 x 175 x 426 mm - USB Mouse, Rescue Kit
项目编号:
410201-9915-000
Processor Intel Core Ultra 7 265K (HP Z2 G1i)
Processor Intel Core Ultra 7 265K (HP Z2 G1i)
项目编号:
410220-0700-000
Processor Intel Core Ultra 7 265K (HP Z2 G1i) High performance processor configuration - Intel Core Ultra 7 265K (8 Performance-cores, 12 Efficient-cores, Performance-core base frequency 3.9 GHz, cache 30 MB) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i
项目编号:
410220-0700-000
Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i)
Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i)
项目编号:
410201-3200-000
Memory 32 GB (1x32) DDR5-5600 (HP Z2 G1i) consisting of 1 x 32 GB modules - DDR5 5600 MHz nonECC unbuffered DIMM - can be extended to 64 GB (2 x 410201-3200-000) or 128 GB (4 x 410201-3200-000) - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i
项目编号:
410201-3200-000
Graphics Card NVIDIA RTX PRO 4000 24 GB
Graphics Card NVIDIA RTX PRO 4000 24 GB
项目编号:
410331-3400-000
Graphics Card NVIDIA RTX PRO 4000 24 GB Professional graphics card for Microscopy Workstation - 24 GB GDDR7 memory - PCI Express 5.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.6 and CUDA 12.8 - Support for up to four displays - Display outputs: 4 x DisplayPort 2.1b (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
项目编号:
410331-3400-000
System Configuration 2b for HP Z2 G1i
System Configuration 2b for HP Z2 G1i
项目编号:
000000-2785-403
System Configuration 2b for HP Z2 G1i Installation of Windows 11 IoT Enterprise LTSC 2024 x64 incl. Windows 11 License - with ZEN Software Installation and System Integration for respective System - only for 410201-9915-000 Microscopy Workstation Compact HP Z2 G1i
项目编号:
000000-2785-403
Language Pack English US (O)
Language Pack English US (O)
项目编号:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
项目编号:
410380-0200-000
Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O)
Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O)
项目编号:
410350-2704-000
Monitor TFT 27" HP Series 7 Pro 727pk (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 3840 x 2160 pixel @ 60 Hz Brightness: 400 nits Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, USB-C Data connectors: 1 x USB Type-C 10Gbps (upstream), 1 x USB Type-C 10Gbps, 5 x USB Type-A 10Gbps Power consumption: Maximum 215 W, Typical 43 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 54.05 cm x 61.34 cm x 22.52 cm Weight incl. stand: 6.5 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
项目编号:
410350-2704-000
Microscopy Camera Axiocam 705 pol R2 (D)
Microscopy Camera Axiocam 705 pol R2 (D)
项目编号:
426560-9071-000
Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) - Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) - Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Megapixel - Pixel Size: 3.45 µm x 3.45 µm - Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) - Spectral Range: With protection glass approx. 350 nm to 1000 nm - Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) - Adjustable Signal Amplification: 1x, 2x, 4x, 8x,16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1 ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Dynamic Range (at gain) Capacity 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: - Exposure time adjustment with continuous, automatic or manual mode - adjustable over or under-exposure mode - optional measurement on defined target area (spot-meter) - Readout of Sensor Sub Regions ("ROI"): Adjustable - Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) - Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature - Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) - Exposure Time Range: 0.1 ms to 60 s - Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) - Status-LED for Camera: Color coded operation status, dimmable - Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) - Optical Interface: C-Mount - Thread Depth for Objectives: Max. 5 mm - Size / Weight: Approx. 10.8 cm x 7.8 cm x 5.1 cm (2.3" x 3.2" x 2.0") / 580 g - Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount - Registration: CE - Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption - Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: - for ZEN: Windows 10 / Windows 11 Supported Application Software: - ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.
项目编号:
426560-9071-000
Cable Dual USB 3.0/USB 2.0 angled 3 m (D)
Cable Dual USB 3.0/USB 2.0 angled 3 m (D)
项目编号:
426557-0100-000
Cable Dual USB 3.0/USB 2.0 angled 3 m (D) one side angled for use on Axiocam 5xx/7xx
Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit
项目编号:
410203-9914-000
System Configuration 2b (Rev. 02) for HP Z8 G5
System Configuration 2b (Rev. 02) for HP Z8 G5
项目编号:
000000-2805-201
System Configuration 2b (Rev. 02) for HP Z8 G5 Installation of Windows 11 IoT Enterprise LTSC 2024 x64 incl. Windows 11 License - With ZEN Software Installation and System Integration of Respective System - for Widefield, Celldiscoverer 7, LSM 900/910, LSM 980/990, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
Graphics Card NVIDIA RTX PRO 4000 24 GB Professional graphics card for Microscopy Workstation - 24 GB GDDR7 memory - PCI Express 5.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.6 and CUDA 12.8 - Support for up to four displays - Display outputs: 4 x DisplayPort 2.1b (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)
Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5
项目编号:
410303-3206-000
Language Pack English US (O)
Language Pack English US (O)
项目编号:
410380-0200-000
Language Pack English US (O) - Keyboard with English (US) layout
项目编号:
410380-0200-000
Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)
Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O)
项目编号:
410350-2408-000
Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable
项目编号:
410350-2408-000
Microscopy Camera Axiocam 705 color R2 (D)
Microscopy Camera Axiocam 705 color R2 (D)
项目编号:
426560-9051-000
Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) - Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array - Number of Pixels: 2464 (H) x 2056 (V) = 5.0 Megapixel - Pixel Size: 3.45 µm x 3.45 µm - Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) - Spectral Range: With IR barrier filter approx. 400 nm to 720 nm - Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) - Adjustable Signal Amplification: 1x, 2x, 4x, 8x,16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Dynamic Range (at gain) Capacity 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: - Exposure time adjustment with continuous, automatic or manual mode, - adjustable over or under-exposure mode, - optional measurement on defined target area (spot-meter), - adjustable color saturation, - White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) - Readout of Sensor Sub Regions ("ROI"): Adjustable - Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) - Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature - Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) - Exposure Time Range: 0.1 ms to 60 s - Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) - Status-LED for Camera: Color coded operation status, dimmable - Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) - Optical Interface: C-Mount - Thread Depth for Objectives: max. 5 mm - Size / Weight: Approx. 10.8 cm x 7.8 cm x 5.1 cm (2.3" x 3.2" x 2.0") / 580 g - Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount - Registration: CE - Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption - Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: - for ZEN: Windows 10 / Windows 11 Supported Application Software: - ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.
ZEN core 3.14+ Software suite for microscope image acquisition, processing, analysis and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the arivis Hub DMS image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData export capabilities. Supported Operating System: Windows 11 The license entitles to use the ZEN core software in the specified version AND in the next ZEN core version.
项目编号:
410135-0011-314
ZEN Module Technical Cleanliness Analysis
ZEN Module Technical Cleanliness Analysis
项目编号:
410136-0128-350
ZEN Module Technical Cleanliness Analysis Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness, air cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059, VDA 19.2, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-VI): Workflow Creator Wizard for application guided selection and auto-generation of the following job templates for technical cleanliness analysis: - The workflows I - III are operable with acquired or loaded images. - The correlative workflows IV - V require image acquisition. (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with AI-based object classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Training of the delivered machine learning models requires ZEN Toolkit AI. (IV) light microscope workflow for correlative technical cleanliness analysis (component and oil cleanliness) with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Toolkit Connect. (V) light microscope workflow for correlative component cleanliness analysis with AI-based object classification. Contains trainable, pre- trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Training of the delivered machine learning models requires ZEN Toolkit AI. Requires in addition ZEN Toolkit Connect. (VI) post analysis workflow from archived data for calculation and interpretation of results to monitor air particles using particle traps supporting VDA 19.2 The job templates cover image acquisition, image analysis and image processing, result presentation in interactive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data.
项目编号:
410136-0128-350
ZEN Toolkit Motorized Acquisition 3.14+
ZEN Toolkit Motorized Acquisition 3.14+
项目编号:
410136-0165-314
ZEN Toolkit Motorized Acquisition 3.14+ Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. Z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles & Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image The license entitles to use the ZEN software in the specified version AND in the next ZEN version.
ZEN core 3.14+ Software suite for microscope image acquisition, processing, analysis and data connectivity. - Customizable Interface: Configurable graphical user interface with a workbench concept for tailored workflows and routine tasks. - Multi-Screen Support: Enables seamless operation across multiple displays. - Full HW Integration: Supports the complete range of ZEISS microscopes (including Visioner 1) configurable via MicroToolbox, Axiocam cameras and additional components. - Interactive and Automatic Control: Provides interactive and automated control of individual motorized microscope components, with seamless transfer of information from encoded components into the software. - Image Acquisition: Supports black-and-white, RGB, high-resolution and high-sensitivity cameras. - Advanced Acquisition Features: Includes HDR, Panorama and manual Extended Depth of Focus (EDF) acquisitions. - Electron Microscope Support: Enables basic image acquisition on electron microscopes. - Image Processing Tools: Provides standard operations for image optimization, including contrast, brightness, gamma, color adjustments, smoothing, sharpening and geometric corrections. - Interactive Measurements: Perform dimensional measurements interactively, including real-time measurements on live images. - Input Form Designer: Enables customer-specific data input, including automated data import. - Report Creation: Generate Microsoft Word and PDF reports, with template modification supported via the ZEN Word add-in. - Data Management Archive: Efficiently manage documents with features such as search, filter, tagging, viewing, re-opening, structuring, exporting and importing (supports drag-and-drop for any file format). - User Management: Provides full multi-user environment support with integration into Windows multi-user functionality. - Data Connectivity: Seamlessly connects to the arivis Hub DMS image database. - Additional Functionalities: Includes ZEN Connect basic features, 2D CAD overlay and QUALData export capabilities. Supported Operating System: Windows 11 The license entitles to use the ZEN core software in the specified version AND in the next ZEN core version.
项目编号:
410135-0011-314
ZEN Toolkit Motorized Acquisition 3.14+
ZEN Toolkit Motorized Acquisition 3.14+
项目编号:
410136-0165-314
ZEN Toolkit Motorized Acquisition 3.14+ Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. Z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles & Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image The license entitles to use the ZEN software in the specified version AND in the next ZEN version.
项目编号:
410136-0165-314
ZEN Module Technical Cleanliness Analysis
ZEN Module Technical Cleanliness Analysis
项目编号:
410136-0128-350
ZEN Module Technical Cleanliness Analysis Software module for evaluation of particulate contamination on prepared specimen. The following standards for component cleanliness, oil cleanliness, air cleanliness and cleanliness of medical products are supported: VDA 19.1, ISO 16232, ISO 4406, ISO 4407, NAS 1638, SAE AS 4059, VDA 19.2, VDI 2083 (Sheet 21). The scope of delivery includes preconfigured automated workflows for technical cleanliness analysis and rating of single or multiple specimen for the user roles Supervisor and Operator. Provided job templates (I-VI): Workflow Creator Wizard for application guided selection and auto-generation of the following job templates for technical cleanliness analysis: - The workflows I - III are operable with acquired or loaded images. - The correlative workflows IV - V require image acquisition. (I) automated workflow for acquisition of multichannel images with different polarization directions in combination with Axiocam 705 pol mainly for the evaluation of component cleanliness and the rating of technical cleanliness of medical products. The use of latest camera sensor technology with on-chip polarization enables a workflow with one single specimen acquisition instead of double image acquisition of the complete specimen area with different contrast methods. This leads to a significant time saving. (II) automated workflow for acquisition of single channel images mainly for oil analysis. (III) automated workflow for component cleanliness testing with AI-based object classification. Contains trainable, pre-trained models for AI- based analysis of multichannel images with different polarization directions. Training of the delivered machine learning models requires ZEN Toolkit AI. (IV) light microscope workflow for correlative technical cleanliness analysis (component and oil cleanliness) with automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Requires in addition ZEN Toolkit Connect. (V) light microscope workflow for correlative component cleanliness analysis with AI-based object classification. Contains trainable, pre- trained models for AI-based analysis of multichannel images with different polarization directions. Supports automated and/or manual particle selection for subsequent SEM/EDS analysis in Free Mode. Training of the delivered machine learning models requires ZEN Toolkit AI. Requires in addition ZEN Toolkit Connect. (VI) post analysis workflow from archived data for calculation and interpretation of results to monitor air particles using particle traps supporting VDA 19.2 The job templates cover image acquisition, image analysis and image processing, result presentation in interactive views for fast inspection and revision of detected particles, reports with results of characteristic values and standard specific methods per tested specimen. Automated storage of generated results and inspection views in the data archive. Inspection and export of archived data.