Carl Zeiss Shop
Upright microscopes
Primotech
Primotech
Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP

Primotech

ZEISS Primotech: Installation and Setup with Matscope Digital Classroom App

ZEISS Primotech: Your Clever Imaging Solution. Wireless and Easy to Use.

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP

Item no.: 430055-9010-100 (individual configuration)

Description

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP included - Microscope stand Primo...

Full description

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP

Item Number: 430055-9010-100 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Show all

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP

Recover

Item no.: 430055-9010-100

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP

Item Number: 430055-9010-100

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP included - Microscope stand Primotech D/A, LED, 5x W0.8 cod., stage ESD, base plate and dust cover - Reflected-light illuminator with LED 3W 5000W - Transmitted-light illuminator with LED lamp 3W 5000K with condenser 0.9 - Filter slider 2x, with conversion filter (3200K), d=25 mm - Slider for oblique illumination - 2x eyepiece E-PL 10x/20 Br. foc. - Tube 30°/20 with integrated IP Camera 3MP - Calibration slide for App - Interface module MNA basic for network communication via Ethernet and Matscope App. Interfaces: - 1 x RJ45 for Tube with integrated camera - 1 x D-Sub for connection to the microscope - 1 x RJ45 Ethernet for network access - 1 x Power supply via Primotech stand - Objective Epiplan 5x/0.13 W0.8'' - Objective Epiplan 20x/0.4 W0.8'' - Objective Epiplan 50x/0.65 W0.8'' - Leveling press with starter kit - Power supply 12V/30W The camera is network-enabled and can exclusively be used with the ZEISS iPad App, Labscope or Matscope. The Apps are available as a free download from the Apple App Store. Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.

Stand accessories

0 added 0 removed

Polarization

0 added 0 removed

Stages and accessories

0 added 0 removed

Tubes and accessories

0 added 0 removed

Intermediate tubes

0 added 0 removed

Filters

0 added 0 removed

ZEISS software

0 added 0 removed

Control devices

0 added 0 removed

Show all

There is no parts list for this product.

Add accessories
Suited Accessories

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP
Item Number: 430055-9010-100 (individual configuration)
Microscope stands upright (4)

Training microscopes

Item has been added to the configuration

Primotech stand TL/Pol conoscopy

Recover

Item no.: 430055-9420-000

Primotech stand TL/Pol conoscopy

Item Number: 430055-9420-000

Primotech stand TL/Pol conoscopy included - noisepiece 5x W0.8 cod. centerable - base plate and dust cover and secure lock for 6x20 slider - transmitted-light illuminator with LED 3W 5000K - stage- and condenser carrier with condenser 0.9 Pol - polarizer D 360° rotatable - rotary stage Pol 360°, incl. 2 specimen clamps, max. sample height 17 mm - power supply 12V/30W

Item has been added to the configuration

Primotech stand TL/RL Pol conoscopy

Recover

Item no.: 430055-9400-000

Primotech stand TL/RL Pol conoscopy

Item Number: 430055-9400-000

Primotech stand TL/RL Pol conoscopy included - noisepiece 5x W0.8 cod. centerable - base plate and dust cover and secure lock for 6x20 slider - transmitted-light illuminator with LED 3W 5000K - stage- and condenser carrier with front lens swing in/out condenser 0.9 Pol - polarizer D 360° rotatable - rotary stage Pol 360°, incl. 2 specimen clamps, max. sample height 17 mm - cabling for intermediate tube with illumination - Power supply 12V/30W

Item has been added to the configuration

Primotech stand TL/RL ESD stage

Recover

Item no.: 430055-9010-000

Primotech stand TL/RL ESD stage

Item Number: 430055-9010-000

Primotech stand TL/RL ESD stage Primotech stand TL/RL cod., stage ESD included: - nosepiece 5x W0.8 cod. - base plate and dust cover - max. sample high 17 mm - transmitted-light illuminator with condenser 0.9 - stage carrier with ESD stage - mount for 6x20 mm slider - power supply 12V/30W

Item has been added to the configuration

Microscope stand Primotech MAT LED, 5x cod., stage A

Recover

Item no.: 430055-9000-000

Microscope stand Primotech MAT LED, 5x cod., stage A

Item Number: 430055-9000-000

Microscope stand Primotech MAT LED, 5x cod., stage A included: - nosepiece 5x cod. W0.8 - base plate and dust cover - max. sample height 34 mm - transmitted light illuminator without condenser - stage carrier with stage 75x50 - mount for 6x20mm slider - power supply 12V/30W

Stand accessories (1)

Filter slider

Item has been added to the configuration

Filter slider 6x30 2x d=25mm, undetachably

Recover

Item no.: 423733-9011-000

Filter slider 6x30 2x d=25mm, undetachably

Item Number: 423733-9011-000

Filter slider 6x30 2x d=25mm, undetachably

Polarization (10)

Various PO accessories

Item has been added to the configuration

Analyzer slider TL/RL, fixed, 6x30, undetachably

Recover

Item no.: 428108-9050-000

Analyzer slider TL/RL, fixed, 6x30, undetachably

Item Number: 428108-9050-000

Analyzer slider TL/RL, fixed, 6x30, undetachably

Item has been added to the configuration

Polarizer slider RL, fixed 6x30, undetachably

Recover

Item no.: 428108-9031-000

Polarizer slider RL, fixed 6x30, undetachably

Item Number: 428108-9031-000

Polarizer slider RL, fixed 6x30, undetachably

Item has been added to the configuration

Polarizer slider A, fixed 6x30mm

Recover

Item no.: 428108-9030-000

Polarizer slider A, fixed 6x30mm

Item Number: 428108-9030-000

Polarizer slider A, fixed 6x30mm

Item has been added to the configuration

Analyzer slider TL/RL, 360° rotatable, 6x30, undetachably, lockable

Recover

Item no.: 428108-9021-000

Analyzer slider TL/RL, 360° rotatable, 6x30, undetachably, lockable

Item Number: 428108-9021-000

Analyzer slider TL/RL, 360° rotatable, 6x30, undetachably, lockable

Item has been added to the configuration

Analyzer slider D/A, 360° rotatable, 6x30mm

Recover

Item no.: 428108-9020-000

Analyzer slider D/A, 360° rotatable, 6x30mm

Item Number: 428108-9020-000

Analyzer slider D/A, 360° rotatable, 6x30mm

Item has been added to the configuration

Quarz depolarizer for tubes Primotech

Recover

Item no.: 428106-9040-000

Quarz depolarizer for tubes Primotech

Item Number: 428106-9040-000

Quarz depolarizer for tubes Primotech

Compensators

Item has been added to the configuration

Compensator wedge 0-4 Lambda, 6x20, undetachably

Recover

Item no.: 427900-9021-000

Compensator wedge 0-4 Lambda, 6x20, undetachably

Item Number: 427900-9021-000

Compensator wedge 0-4 Lambda, 6x20, undetachably

Item has been added to the configuration

Wedge compensator 0-4 Lambda, 6x20

Recover

Item no.: 427900-9020-000

Wedge compensator 0-4 Lambda, 6x20

Item Number: 427900-9020-000

Wedge compensator 0-4 Lambda, 6x20

Item has been added to the configuration

Compensator Lambda/4, 6x20, undetachably

Recover

Item no.: 427900-9011-000

Compensator Lambda/4, 6x20, undetachably

Item Number: 427900-9011-000

Compensator Lambda/4, 6x20, undetachably

Item has been added to the configuration

Compensator Lambda, 6x20, undetachably

Recover

Item no.: 427900-9001-000

Compensator Lambda, 6x20, undetachably

Item Number: 427900-9001-000

Compensator Lambda, 6x20, undetachably

Stages and accessories (1)

Object guides

Item has been added to the configuration

Object guide Pol 35x30 mm, attachable for Primotech

Recover

Item no.: 432338-9000-000

Object guide Pol 35x30 mm, attachable for Primotech

Item Number: 432338-9000-000

Object guide Pol 35x30 mm, attachable for Primotech for slides 48x28 mm and 75x25 mm

Tubes and accessories (6)

Binocular tubes

Item has been added to the configuration

Tube 30°/20 Pol for Primotech

Recover

Item no.: 425538-9040-000

Tube 30°/20 Pol for Primotech

Item Number: 425538-9040-000

Tube 30°/20 Pol for Primotech

Item has been added to the configuration

Tube 30°/20 with integrated HD IP Camera 3MP for Primotech

Recover

Item no.: 425538-9030-000

Tube 30°/20 with integrated HD IP Camera 3MP for Primotech

Item Number: 425538-9030-000

Tube 30°/20 with integrated HD IP Camera 3MP for Primotech Camera specification Sensor: 1/2.5'' color, CMOS Resolution: 2048 (H) x 1536 (V) = 3.1 Megapixels Resolution of single image: 2048 x 1536 pixels IP Livestream: 640 x 480 pixels Interfaces: 1x Ethernet RJ45, 1x USB for power supply Can only be controlled via network In combination with the Primotech ZEISS offers the software Matscope, can exclusively be used with iPad 3rd generation, iPad mini 4, iPhone 5 or later series with iOS 9. ZEISS Matscope iOS version is free for download in AppStore. ZEISS Matscope Windows version is free for download in product webpage Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.

Item has been added to the configuration

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech

Recover

Item no.: 425538-9020-100

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech

Item Number: 425538-9020-100

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech included - Calibration slide for App - Interface module MNA basic for network communication via Ethernet and Matscope App. Interfaces: - 1 x RJ45 Ethernet for Tube with integrated camera - 1 x D-Sub for connection to the microscope - 1 x RJ45 Ethernet for network access Camera specification Sensor: Micron MT9P031, 5 Megapixels, color, CMOS Basic resolution: 2560 (H) x 1920 (V) = 5.0 Megapixels Pixel size: 2.2 µm x 2.2 µm Sensor size: 5.7 mm x 4.28 mm, equivalent to 1/2.5'' (diagonal 7.1 mm) Live frame rate (depending on hardware and software configuration): H x V Frame Rate 800 x 600 20 1280 x 720 15 (over network) Live frame rate standalone via DVI-D (HDMI) : H x V Frame Rate 1280 x 720 60 1920 x 1080 30 Digitization: 3 x 8 bit/pixel Integration time: 20 µs up to 2 s Interfaces: 1x SD card slot, 1x USB 2.0, 1x HDMI, 1x Ethernet RJ45 100 Mbit, 1x IR sensor Spectral range: Approx. 400 nm-700 nm, IR filter Read-out mode: Progressive Registration: CE, FCC Class A, RoHS Ambient conditions: +5° ... +45° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Power connection: 12V/0.5A provided by the stand via interconnection cable Dual color LED: Power on and ready for capture (green); Recording (blinking green); Not ready (red); Error (blinking red) Integrated slot: SD card slot for SD and SDHC cards Control buttons: Image/Video capture, white balance, contrast, brightness, menu The camera is network-enabled and can be used with the ZEISS iPad App, Labscope or Matscope. The Apps are available as a free download from the Apple App Store. Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.

Item has been added to the configuration

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech

Recover

Item no.: 425538-9020-000

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech

Item Number: 425538-9020-000

Tube 30°/20 with integrated HD IP Camera 5MP for Primotech Camera specification Sensor: Micron MT9P031, 5 Megapixels, color, CMOS Basic resolution: 2560 (H) x 1920 (V) = 5.0 Megapixels Pixel size: 2.2 µm x 2.2 µm Sensor size: 5.7 mm x 4.28 mm, equivalent to 1/2.5'' (diagonal 7.1 mm) Live frame rate (depending on hardware and software configuration): H x V Bildrate 800 x 600 20 Live frame rate standalone via DVI-D (HDMI) : H x V Frame Rate 1280 x 720 60 1920 x 1080 30 Digitization: 3 x 8 bit/pixel Integration time: 20 µs up to 2 s Interfaces: 1x SD card slot, 1x USB 2.0 (connection cable included), 1x DVI- D (HDMI), 1x Ethernet RJ45 100 Mbit, 1x IR sensor Spectral range: Approx. 400 nm-700 nm, IR filter Read-out mode: Progressive Registration: CE, FCC Class B, RoHS Ambient conditions: +5° ... +45° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Power connection: External power supply USB 2.0 5V/1A 100...240VAC/50...60Hz with country-specific adapters Dual color LED: Power on and ready for capture (green); Recording (blinking green); Not ready (red); Error (blinking red) Integrated slot: SD card slot for SD and SDHC cards Control buttons: Image/Video capture, white balance, contrast, brightness, menu In combination with the Primotech ZEISS offers the software Matscope, can exclusively be used with iPad 3rd generation, iPad mini 4, iPhone 5 or later series with iOS 9. ZEISS Matscope iOS version is free for download in AppStore. ZEISS Matscope Windows version is free for download in product webpage Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.

Item has been added to the configuration

Binocular phototube 30°/23 (50:50), for Primotech

Recover

Item no.: 425538-9010-000

Binocular phototube 30°/23 (50:50), for Primotech

Item Number: 425538-9010-000

Binocular phototube 30°/23 (50:50), for Primotech

Item has been added to the configuration

Tube 30°/20 for Primotech

Recover

Item no.: 425538-9000-000

Tube 30°/20 for Primotech

Item Number: 425538-9000-000

Tube 30°/20 for Primotech

Intermediate tubes (3)

Various intermediate tube accessories

Item has been added to the configuration

Intermediate tube transmitted light with Bertrand system

Recover

Item no.: 423733-9100-000

Intermediate tube transmitted light with Bertrand system

Item Number: 423733-9100-000

Intermediate tube transmitted light with Bertrand system included: - swing in/out Bertrand system, transmitted light - focusable Bertrand lens - secure lock on slider interfaces

Item has been added to the configuration

Intermediate tube TL/RL Pol conos., LED 3W 5000K, reflector turet 3x

Recover

Item no.: 423733-9030-000

Intermediate tube TL/RL Pol conos., LED 3W 5000K, reflector turet 3x

Item Number: 423733-9030-000

Intermediate tube TL/RL Pol conos., LED 3W 5000K, reflector turet 3x included: - reflected-light illumination with LED 3W 5000K - turret 3x with integrated Bertrand lens for objective 63x - secure lock on slider interfaces

Item has been added to the configuration

Intermediate tube reflected Light, LED 3W 5000K

Recover

Item no.: 423733-9000-000

Intermediate tube reflected Light, LED 3W 5000K

Item Number: 423733-9000-000

Intermediate tube reflected Light, LED 3W 5000K included: - Reflected-light illuminator with LED 3W 5000K - Slider for oblique illumination

Filters (1)

Color filter

Item has been added to the configuration

Color filter 1, mounted

Recover

Item no.: 000000-1764-617

Color filter 1, mounted

Item Number: 000000-1764-617

Color filter 1, mounted

Transmitted-light objectives (5)

A-Plan Polarization Contrast

Item has been added to the configuration

Objective A-Plan 63x/0.8 Pol W0.8''

Recover

Item no.: 441063-9900-000

Objective A-Plan 63x/0.8 Pol W0.8''

Item Number: 441063-9900-000

Objective A-Plan 63x/0.8 Pol W0.8'' (WD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Pol W0.8''

Recover

Item no.: 441053-9900-000

Objective A-Plan 40x/0.65 Pol W0.8''

Item Number: 441053-9900-000

Objective A-Plan 40x/0.65 Pol W0.8'' (WD=0.43mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 Pol W0.8''

Recover

Item no.: 441043-9900-000

Objective A-Plan 20x/0.45 Pol W0.8''

Item Number: 441043-9900-000

Objective A-Plan 20x/0.45 Pol W0.8'' (WD=0.50mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Pol W0.8''

Recover

Item no.: 441033-9900-000

Objective A-Plan 10x/0.25 Pol W0.8''

Item Number: 441033-9900-000

Objective A-Plan 10x/0.25 Pol W0.8'' (WD=4.2mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 Pol W0.8''

Recover

Item no.: 441023-9900-000

Objective A-Plan 5x/0.12 Pol W0.8''

Item Number: 441023-9900-000

Objective A-Plan 5x/0.12 Pol W0.8'' (WD=9.9mm)

Reflected-light objectives (5)

Epiplan BrightField

Item has been added to the configuration

Objective Epiplan 100x/0.8 W0.8''

Recover

Item no.: 442080-9901-000

Objective Epiplan 100x/0.8 W0.8''

Item Number: 442080-9901-000

Objective Epiplan 100x/0.8 W0.8'' (WD=1.3mm)

Item has been added to the configuration

Objective Epiplan 50x/0.65 W0.8''

Recover

Item no.: 442060-9901-000

Objective Epiplan 50x/0.65 W0.8''

Item Number: 442060-9901-000

Objective Epiplan 50x/0.65 W0.8'' (WD=1.6mm)

Item has been added to the configuration

Objective Epiplan 20x/0.4 W0.8''

Recover

Item no.: 442040-9902-000

Objective Epiplan 20x/0.4 W0.8''

Item Number: 442040-9902-000

Objective Epiplan 20x/0.4 W0.8'' (WD=4.1mm)

Item has been added to the configuration

Objective Epiplan 10x/0.23 W0.8''

Recover

Item no.: 442030-9903-000

Objective Epiplan 10x/0.23 W0.8''

Item Number: 442030-9903-000

Objective Epiplan 10x/0.23 W0.8'' (WD=11.1mm)

Item has been added to the configuration

Objective Epiplan 5x/0.13 W0.8''

Recover

Item no.: 442020-9902-000

Objective Epiplan 5x/0.13 W0.8''

Item Number: 442020-9902-000

Objective Epiplan 5x/0.13 W0.8'' (WD=20.5mm)

Accessories for objectives (2)

Microscope slides

Item has been added to the configuration

Calibration slide for Lab Scope

Recover

Item no.: 474029-9090-000

Calibration slide for Lab Scope

Item Number: 474029-9090-000

Calibration slide for Lab Scope

Microscope slides, various accessories

Item has been added to the configuration

Leveling press with Starter kit, 3x metal sample plate 76x26mm

Recover

Item no.: 434002-9010-000

Leveling press with Starter kit, 3x metal sample plate 76x26mm

Item Number: 434002-9010-000

Leveling press with Starter kit, 3x metal sample plate 76x26mm

ZEISS software (3)

Software for microscopes

Item has been added to the configuration

Upgrade Labscope/Matscope Teacher from <=30 to >30 microscopes

Recover

Item no.: 410138-1015-100

Upgrade Labscope/Matscope Teacher from <=30 to >30 microscopes

Item Number: 410138-1015-100

Upgrade Labscope/Matscope Teacher from <(><<)>=30 to >30 microscopes Upgrade from ''Labscope/Matscope Teacher (<(><<)>=30 Microscopes) Hardware License Key'' to ''Labscope/Matscope Teacher (>30 Microscopes) Hardware License Key'', to support any number of microscopes.

Item has been added to the configuration

Labscope/Matscope Teacher (>30 Microscopes)

Recover

Item no.: 410135-1030-100

Labscope/Matscope Teacher (>30 Microscopes)

Item Number: 410135-1030-100

Labscope/Matscope Teacher (>30 Microscopes) Integrated management tool for connected microscopes, devices and users. Supports any number of microscopes. Configurable: - Classroom and class - Layout of class - Group in the class Clear monitor layout for the teacher. Discussion within group. Cloud file storage in the server with protected authority. Centralized control Labscope/Matscope functionality. Teaching assistant tool, including - Raise hands - Blank screen - Calling the roll tool - Locking workspace Supported operating systems: Windows Server 2012 or Windows Server 2016.

Item has been added to the configuration

Labscope/Matscope Teacher (<=30 Microscopes)

Recover

Item no.: 410135-1029-100

Labscope/Matscope Teacher (<=30 Microscopes)

Item Number: 410135-1029-100

Labscope/Matscope Teacher (<(><<)>=30 Microscopes) Integrated management tool for connected microscopes, devices and users. Supports up to 30 microscopes in total. Configurable: - Classroom and class - Layout of class - Group in the class Clear monitor layout for the teacher. Discussion within group. Cloud file storage in the server with protected authority. Centralized control Labscope/Matscope functionality. Teaching assistant tool, including - Raise hands - Blank screen - Calling the roll tool - Locking workspace Supported operating systems: Windows 7 64-bit, Windows 10 64-bit, Windows Server 2012 or Windows Server 2016.

Control devices (2)

Various accessories

Item has been added to the configuration

Interface module MNA advanced, Primotech

Recover

Item no.: 430055-9110-000

Interface module MNA advanced, Primotech

Item Number: 430055-9110-000

Interface module MNA advanced, Primotech for network communication and saving of microscope configuration and scaling via Ethernet and Matscope App. The Advanced type enables the use of full Matscope functionality including advanced measurement and automatic scaling. Interfaces: - 1 x RJ45 Ethernet for Tube with integrated camera - 1 x D-Sub for connection to the microscope - 1 x RJ45 Ethernet for network access

Item has been added to the configuration

Interface module MNA basic, Primotech

Recover

Item no.: 430055-9100-000

Interface module MNA basic, Primotech

Item Number: 430055-9100-000

Interface module MNA basic, Primotech for network communication via Ethernet and Matscope App. Interfaces: - 1 x RJ45 for Tube with integrated camera - 1 x D-Sub for connection to the microscope - 1 x RJ45 Ethernet for network access - 1 x Power supply via Primotech stand

Packing and dust protection (1)

Cases for microscopes

Item has been added to the configuration

Case for transport and storage for Primotech

Recover

Item no.: 434002-9000-000

Case for transport and storage for Primotech

Item Number: 434002-9000-000

Case for transport and storage for Primotech - with trolley, 2 wheels, lateral handle and lockable, - dustproof, - outside dimensions of the case: 615 x 540 x 325 mm, - weight 7.5 kg

Microscope Primotech D/A cod., stage ESD, integrated IP Camera 3MP included - Microscope stand Primotech D/A, LED, 5x W0.8 cod., stage ESD, base plate and dust cover - Reflected-light illuminator with LED 3W 5000W - Transmitted-light illuminator with LED lamp 3W 5000K with condenser 0.9 - Filter slider 2x, with conversion filter (3200K), d=25 mm - Slider for oblique illumination - 2x eyepiece E-PL 10x/20 Br. foc. - Tube 30°/20 with integrated IP Camera 3MP - Calibration slide for App - Interface module MNA basic for network communication via Ethernet and Matscope App. Interfaces: - 1 x RJ45 for Tube with integrated camera - 1 x D-Sub for connection to the microscope - 1 x RJ45 Ethernet for network access - 1 x Power supply via Primotech stand - Objective Epiplan 5x/0.13 W0.8'' - Objective Epiplan 20x/0.4 W0.8'' - Objective Epiplan 50x/0.65 W0.8'' - Leveling press with starter kit - Power supply 12V/30W The camera is network-enabled and can exclusively be used with the ZEISS iPad App, Labscope or Matscope. The Apps are available as a free download from the Apple App Store. Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.