Axio Examiner.Z1
Axio Examiner.Z1
Axio Examiner.Z1
Axio Examiner.Z1
Fixed Stage microscope Axio Examiner.Z1
Item no.: 491406-0001-000 (individual configuration)Fixed Stage microscope Axio Examiner.Z1 for electrophysiology for bright field, inclined illuminatio...
Fixed Stage microscope Axio Examiner.Z1
Item Number: 491406-0001-000 (individual configuration) Reset configurationTip
Current configuration
-
Lower microscope part Axio Examiner mot.
Item no.: 430031-9012-000Lower microscope part Axio Examiner mot.
Item Number: 430031-9012-000Lower microscope part Axio Examiner mot. - motorized objective focusing, 25 nm increments, 100 nm reproducibility, 15 mm focus lifting range - adapter for objective mount - transmitted light illumination for Axio Examiner with luminous field diaphragm - switchable diffusion disk - mount for Dodt contrast slider - heat-protection filter/ filter IR BP 750-990 for IR contrast method used alternately - 6-position filter turret for dia. 32 mm filters
-
Upper microscope part D/A Axio Examiner.Z1 with sideport 60N
Item no.: 423731-9031-000Upper microscope part D/A Axio Examiner.Z1 with sideport 60N
Item Number: 423731-9031-000Upper microscope part D/A Axio Examiner.Z1 with sideport 60N with mount for reflected-light illumination man. P&C or reflected-light illumination mot. P&C, additional lower microscope part Axio Examiner mot. is required
-
Connecting PCB for mot. components in upper part Axio Examiner D1/Z1
Item no.: 423731-9160-000Connecting PCB for mot. components in upper part Axio Examiner D1/Z1
Item Number: 423731-9160-000Connecting PCB for mot. components in upper part Axio Examiner D1/Z1 for use of shutter A mot. or reflected-light illumination mot.
-
Aqua Stop for condensers LD 0.8, 0.9 and 1.2
Item no.: 431717-9000-000Aqua Stop for condensers LD 0.8, 0.9 and 1.2
Item Number: 431717-9000-000Aqua Stop for condensers LD 0.8, 0.9 and 1.2 Flexible cover protecting from overflowing liquids in the area of the condenser front lens
-
4-position objective turret M27, DIC cod.; Axio Examiner
Item no.: 424516-9030-0004-position objective turret M27, DIC cod.; Axio Examiner
Item Number: 424516-9030-0004-position objective turret M27, DIC cod.; Axio Examiner objective turret changeable by customer - 4 objective mounts M27, 3x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range - position coding via Hall sensors
-
Stage carrier Axio Examiner, attachable, with support
Item no.: 430711-9000-000Stage carrier Axio Examiner, attachable, with support
Item Number: 430711-9000-000Stage carrier Axio Examiner, attachable, with support
-
Condenser carrier Axio Examiner, mot. focus
Item no.: 430721-9011-000Condenser carrier Axio Examiner, mot. focus
Item Number: 430721-9011-000Condenser carrier Axio Examiner, mot. focus - 2 µm increments - 4.5 mm focus lifting range - optional manual operation
-
Slider 14x40 FL attenuator, discrete
Item no.: 423730-9130-000Slider 14x40 FL attenuator, discrete
Item Number: 423730-9130-000Slider 14x40 FL attenuator, discrete For insert into the aperture stop plane of reflected-light illuminator. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.
-
Slider for sideport Axio Examiner with 100% mirror 46x34mm
Item no.: 423731-9131-000Slider for sideport Axio Examiner with 100% mirror 46x34mm
Item Number: 423731-9131-000Slider for sideport Axio Examiner with 100% mirror 46x34mm
-
Docking station with TFT display for Axio Examiner/Axio Imager Vario
Item no.: 432926-9001-000Docking station with TFT display for Axio Examiner/Axio Imager Vario
Item Number: 432926-9001-000Docking station with TFT display for Axio Examiner/Axio Imager Vario Control module with TFT display, coaxial coarse/fine focusing knobs and freely programmable buttons for the control of motorized Axio Examiner and Axio Imager.Z2 Vario components. Positioning on the desk as required. 30°-45° tilt adjustment of the TFT display
-
Adapter for expansion of specimen area by 30 mm
Item no.: 430030-9100-000Adapter for expansion of specimen area by 30 mm
Item Number: 430030-9100-000Adapter for expansion of specimen area by 30 mm Insert between upper and lower part of the Axio Scope and Axio Examiner microscopes. Expansion to max. sample height of altogether 79 mm (109 mm, if upper microscope parts Axio Examiner.A1 are used)
-
Shutter mot. for transmitted-light illumination Axio Examiner
Item no.: 423731-9060-000Shutter mot. for transmitted-light illumination Axio Examiner
Item Number: 423731-9060-000Shutter mot. for transmitted-light illumination Axio Examiner for lower microscope part Axio Examiner mot., switching time <100 ms
-
Reflected-light illumination with reflector turret 5x mot. P&C
Item no.: 423731-9121-000Reflected-light illumination with reflector turret 5x mot. P&C
Item Number: 423731-9121-000Reflected-light illumination with reflector turret 5x mot. P&C achromatic, for HBO/HXP/Colibri - usable with upper microscope parts D/A Axio Examiner D1 and Z1 - mounts for luminous-field diaphragm slider and aperture stop slider or FL attenuator - mechanical safety shutter - optical axis on the front reflector position
-
Stop slider A 14x40 mm with luminous-field diaphragm
Item no.: 423730-9100-000Stop slider A 14x40 mm with luminous-field diaphragm
Item Number: 423730-9100-000Stop slider A 14x40 mm with luminous-field diaphragm usable with reflected-light illuminator HD DIC
-
Reflector module FL EC P&C
Item no.: 424931-0000-000Reflector module FL EC P&C
Item Number: 424931-0000-000Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm
-
HAL 100 illuminator with quartz collector
Item no.: 423000-9901-000HAL 100 illuminator with quartz collector
Item Number: 423000-9901-000HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter
-
Solid-State Light Source Colibri 7, Type RYB-UV
Item no.: 423052-9720-000Solid-State Light Source Colibri 7, Type RYB-UV
Item Number: 423052-9720-000Solid-State Light Source Colibri 7, Type RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.
-
Bulb 12V 100W Halogen Rectangular Filament
Item no.: 380059-1660-000Bulb 12V 100W Halogen Rectangular Filament
Item Number: 380059-1660-000Bulb 12V 100W Halogen Rectangular Filament
-
4-position CAN hub for microscope stands with CAN interface
Item no.: 432927-9050-0004-position CAN hub for microscope stands with CAN interface
Item Number: 432927-9050-0004-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario
-
DIC slider W PA 40x/1.0 III
Item no.: 426967-9010-000DIC slider W PA 40x/1.0 III
Item Number: 426967-9010-000DIC slider W PA 40x/1.0 III
-
DIC slider Senarmont 75 W PA 20x/1.0 III
Item no.: 426967-9000-000DIC slider Senarmont 75 W PA 20x/1.0 III
Item Number: 426967-9000-000DIC slider Senarmont 75 W PA 20x/1.0 III for use with Axio Examiner only
-
Analyzer module D P&C for IR-DIC 770 nm
Item no.: 424941-9020-000Analyzer module D P&C for IR-DIC 770 nm
Item Number: 424941-9020-000Analyzer module D P&C for IR-DIC 770 nm
-
Analyzer module Pol ACR P&C for transmitted light
Item no.: 424937-9901-000Analyzer module Pol ACR P&C for transmitted light
Item Number: 424937-9901-000Analyzer module Pol ACR P&C for transmitted light
-
Senarmont polarizer DIC/VIS-IR 770 nm
Item no.: 427710-9030-000Senarmont polarizer DIC/VIS-IR 770 nm
Item Number: 427710-9030-000Senarmont polarizer DIC/VIS-IR 770 nm
-
Mechanical stage 75x50 mot standard; CAN (D)
Item no.: 432026-9000-000Mechanical stage 75x50 mot standard; CAN (D)
Item Number: 432026-9000-000Mechanical stage 75x50 mot standard; CAN (D) for Axio Scope, Axio Examiner, Axio Imager and SteREO - with hardcoat anodized surface - stepper motor drive with integrated controller - connection via CAN bus - stage plate 292 x 187 x 18 mm - travel range 75 mm x 50 mm - max speed 100 mm/s - resolution: 0.5 µm - reproducibility: +/- 5 µm - absolute accuracy: +/- 30 µm - max sample weight: 1 kg - incl. CAN cable
-
Universal mounting frame for Petri dishes and slides
Item no.: 432311-9901-000Universal mounting frame for Petri dishes and slides
Item Number: 432311-9901-000Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner
-
Binocular phototube 15°/23 (100:0/0:100), upright image
Item no.: 425521-9020-000Binocular phototube 15°/23 (100:0/0:100), upright image
Item Number: 425521-9020-000Binocular phototube 15°/23 (100:0/0:100), upright image adjustable stop, camera port with interface 60N
-
Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC
Item no.: 447958-9000-000Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC
Item Number: 447958-9000-000Filter IR BP 750-790 nm d=32 x 2 mm for IR-DIC
-
Filter set 56 HE LED (E)
Item no.: 489056-9110-000Filter set 56 HE LED (E)
Item Number: 489056-9110-000Filter set 56 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.
-
Eyepiece PL 10x/23 Br. foc.
Item no.: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
Item Number: 444036-9000-000Eyepiece PL 10x/23 Br. foc.
-
Eyepiece eyecup
Item no.: 444801-0000-000Eyepiece eyecup
Item Number: 444801-0000-000Eyepiece eyecup
-
Objective W Plan-Apochromat 10x/0.5 M27 75mm
Item no.: 421440-9900-000Objective W Plan-Apochromat 10x/0.5 M27 75mm
Item Number: 421440-9900-000Objective W Plan-Apochromat 10x/0.5 M27 75mm parfocal length 75mm, (FWD=3.7mm), (UV) VIS-IR
-
Objective W Plan-Apochromat 20x/1.0 DIC M27 75mm
Item no.: 421452-9800-000Objective W Plan-Apochromat 20x/1.0 DIC M27 75mm
Item Number: 421452-9800-000Objective W Plan-Apochromat 20x/1.0 DIC M27 75mm parfocal length 75mm (FWD=1.8mm), (UV) VIS-IR
-
Objective W Plan-Apochromat 40x/1.0 DIC M27
Item no.: 421462-9900-000Objective W Plan-Apochromat 40x/1.0 DIC M27
Item Number: 421462-9900-000Objective W Plan-Apochromat 40x/1.0 DIC M27 (FWD=2.5mm), VIS-IR
-
Adapter 30mm with optics and DIC slider mount
Item no.: 424516-9041-000Adapter 30mm with optics and DIC slider mount
Item Number: 424516-9041-000Adapter 30mm with optics and DIC slider mount for adaptation of objectives M27 with parfocal length of 45mm
-
Condenser, achromatic-aplanatic 1.2W H DIC 5x
Item no.: 424226-9020-000Condenser, achromatic-aplanatic 1.2W H DIC 5x
Item Number: 424226-9020-000Condenser, achromatic-aplanatic 1.2W H DIC 5x with - fixed front lens - 5-position modulator disk - 3 mounts for DIC prisms - rotary stop for inclined illumination For objectives 20x-100x (10x-100x with enclosed diffusion disk), WD=2.0mm for 0.17 mm chamber bottom thickness and water immersion
-
Condenser module DIC III/1.2 Senarmont
Item no.: 426724-9020-000Condenser module DIC III/1.2 Senarmont
Item Number: 426724-9020-000Condenser module DIC III/1.2 Senarmont
-
Extension cable 2 m for illuminators HAL 100/LED
Item no.: 457411-9051-000Extension cable 2 m for illuminators HAL 100/LED
Item Number: 457411-9051-000Extension cable 2 m for illuminators HAL 100/LED
-
Controller for Axio Examiner
Item no.: 432610-9023-000Controller for Axio Examiner
Item Number: 432610-9023-000Controller for Axio Examiner - for use with lower microscope part Axio Examiner mot. - for Axio Examiner.A1/D1/Z1 - 100...127 / 200...240 V AC, autorange 50...60Hz / 320 VA - country-specific power cord supplied
-
Dust protection Set L
Item no.: 434304-0000-000Dust protection Set L
Item Number: 434304-0000-000Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm
Fixed Stage microscope Axio Examiner.Z1 for electrophysiology for bright field, inclined illumination, DIC-IR/VIS and epi-fluorescence, with motorized objective and condenser focusing as well as motorized reflector turret