Fixed Stage microscope Axio Examiner.A1

Lower microscope part Axio Examiner mot. - motorized objective focusing, 25 nm increments, 100 nm reproducibility, 15 mm focus lifting range - adapter for objective mount - transmitted light illumination for Axio Examiner with luminous field diaphragm - switchable diffusion disk - mount for Dodt contrast slider - heat-protection filter/ filter IR BP 750-990 for IR contrast method used alternately - 6-position filter turret for dia. 32 mm filters

Upper microscope part D/ A-FL Axio Examiner.A1 with - FL reflected-light illumination for HBO/HXP/Colibri with manual safety shutter - integrated luminous-field diaphragm and FL attenuator - mount for reflector slider P&C or reflector turret P&C - mount for filter slider 14x40

Aqua Stop for condensers LD 0.8, 0.9 and 1.2 Flexible cover protecting from overflowing liquids in the area of the condenser front lens

2-position objective turret M27, DIC; Axio Examiner objective turret changeable by customer - 2 objective mounts M27, 1x XYZ adjustable - 1 mount for DIC slider for objectives with 75 mm parfocal length - 22 mm objective lifting range

Stage carrier Axio Examiner, attachable, with support

Condenser carrier Axio Examiner

Reflector turret 4x man., changeable, for P&C modules

Slider for Dodt gradient contrast for condensers 0.9

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Illumination adapter A, achromatic, Axio Scope, Axio Examiner.A1 usable for reflected light with HAL 100, LED, HXP, Colibri and HBO illuminator

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Solid-State Light Source Colibri 5, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Control Panel for Colibri 5/7 and Viluma 5/7 with LCD to display the operating state. For LED selection and brightness setting.

Bulb 12V 100W Halogen Rectangular Filament

Mechanical stage 75x50 R ergon. drive, fixed position with hardcoat anodized surface, 240 x 157 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting shiftable by 90 mm in y direction, fixed to required position

Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner

Binocular phototube 20°/23 (100:0/0:100), upright image with sliding prism, camera port with interface 60N

Neutral-density filter set D, d=32 mm Axio Examiner consisting of 5 neutral-density filters with 50%, 25%, 12%, 6% and 1.5% transmission

Filter set 56 HE LED (E) for use with ZEISS LED fluorescence light sources. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.

Eyepiece PL 10x/23 Br. foc.

Eyepiece eyecup

Objective W N-Achroplan 10x/0.3 M27 (FWD=2.6mm)

Objective W N-Achroplan 40x/0.75 M27 (FWD=2.1mm)

Condenser, achromatic-aplanatic 0.9 H DIC 5x with - fixed front lens - 5-position modulator disk - 3 mounts for DIC prisms - rotary stop for inclined illumination For objectives 10x-100x (5x-100x with enclosed diffusion disk), WD=1.2 mm

Extension cable 2 m for illuminators HAL 100/LED

Controller for Axio Examiner - for use with lower microscope part Axio Examiner mot. - for Axio Examiner.A1/D1/Z1 - 100...127 / 200...240 V AC, autorange 50...60Hz / 320 VA - country-specific power cord supplied

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm