Home
Stereomicroscopes
SteREO Discovery
SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

SteREO Discovery.V12

+13

Variants SteREO Discovery.V12 You can customize this list by removing one or more columns. Show all variants (13) Show all Hide all	Stereomicroscope SteREO Discovery.V12 with stand N Item no.: 495035-9801-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0001-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0004-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0008-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0005-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0011-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0030-000	Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0027-000	Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0016-000	Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0031-000	Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0020-000	Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0046-000	SteREO Discovery.V12 complete system for Correlative Microscopy Item no.: 495007-0050-000

Variants SteREO Discovery.V12 You can customize this list by removing one or more columns. Show all variants (13) Show all Hide all	example picture Stereomicroscope SteREO Discovery.V12 with stand N Item no.: 495035-9801-000 Stereomicroscope SteREO Discovery.V12 with stand N Item no.: 495035-9801-000 Stereomicroscope SteREO Discovery.V12 with stand N without illumination Stereomicroscope SteREO Discovery.V12 with stand N without i...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0001-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0001-000 Stereomicroscope SteREO Discovery.V12 with stand SDA, without illumination Stereomicroscope SteREO Discovery.V12 with stand SDA, withou...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0004-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0004-000 Stereomicroscope SteREO Discovery.V12 with focus motor and without illumination Stereomicroscope SteREO Discovery.V12 with focus motor and w...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0008-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0008-000 Stereomicroscope SteREO Discovery.V12 with focus motor, SYCOP control and without illumination Stereomicroscope SteREO Discovery.V12 with focus motor, SYCO...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0005-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0005-000 Stereomicroscope SteREO Discovery.V12 with focus motor and variable LED epi-illumination Stereomicroscope SteREO Discovery.V12 with focus motor and v...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0011-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0011-000 Stereomicroscope SteREO Discovery.V12 with motor focus, SYCOP control and coaxial incident-light brightfield illuminator Stereomicroscope SteREO Discovery.V12 with motor focus, SYCO...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0030-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0030-000 Stereomicroscope SteREO Discovery.V12 with objective nosepiece S, coax and spot illumination Stereomicroscope SteREO Discovery.V12 with objective nosepie...	example picture Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0027-000 Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0027-000 Fluorescence stereomicroscope SteREO Discovery.V12 with coarse/fine drive, intermediate LED tube 38HE GFP and 69 FITC and EasyLED ring light Plus Fluorescence stereomicroscope SteREO Discovery.V12 with coar...	example picture Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0016-000 Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0016-000 Fluorescence stereomicroscope SteREO Discovery.V12 with coarse/fine drive, HXP 120 V and incident-light oblique illumination Fluorescence stereomicroscope SteREO Discovery.V12 with coar...	example picture Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0031-000 Stereomicroscope SteREO Discovery.V12 Item no.: 495007-0031-000 Stereomicroscope SteREO Discovery.V12 with objective nosepiece S, coax, all-side epi-illumination and mechanical stage 150x100 Stereomicroscope SteREO Discovery.V12 with objective nosepie...	example picture Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0020-000 Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0020-000 Fluorescence stereomicroscope SteREO Discovery.V12 with all-sided epi-illumination at nosepiece and SYCOP control Fluorescence stereomicroscope SteREO Discovery.V12 with all-...	example picture Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0046-000 Fluorescence stereomicroscope SteREO Discovery.V12 Item no.: 495007-0046-000 Fluorescence stereomicroscope SteREO Discovery.V12 with focus motor, SYCOP control, PentaFluar and HXP 120 V, 3 ring illuminators Fluorescence stereomicroscope SteREO Discovery.V12 with focu...	example picture SteREO Discovery.V12 complete system for Correlative Microscopy Item no.: 495007-0050-000 SteREO Discovery.V12 complete system for Correlative Microscopy Item no.: 495007-0050-000 SteREO Discovery.V12 complete system for Correlative Microscopy in materials analysis with incident-light bright field SteREO Discovery.V12 complete system for Correlative Microsc...
Eyepieces	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece E-PL 10x/20 Br.foc. Eyepiece E-PL 10x/20 Br.foc. Item no.: 444232-9904-000 Eyepiece E-PL 10x/20 Br.foc. With mount for reticle diam. 26 mm. Item no.: 444232-9904-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 16x/16 Br. foc. Eyepiece PL 16x/16 Br. foc. Item no.: 444054-9000-000 Eyepiece PL 16x/16 Br. foc. With mount for reticle diam. 21 mm. Item no.: 444054-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000	Eyepieces Eyepiece PL 10x/23 Br. foc. Eyepiece PL 10x/23 Br. foc. Item no.: 444036-9000-000 Eyepiece PL 10x/23 Br. foc. With mount for reticle diam. 26 mm. Item no.: 444036-9000-000
Eyepiece accessories	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000	Eyepiece accessories Eyepiece eyecup Eyepiece eyecup Item no.: 444801-0000-000 Eyepiece eyecup Item no.: 444801-0000-000
Stereomicroscopes	Stereomicroscopes Stemi Mount Column 32 with Drive Stemi Mount Column 32 with Drive Item no.: 435424-9301-000 Stemi Mount Column 32 with Drive - Lifting range +/- 25 mm, load capacity max. 5 kg - 2x M8 thread for adaptation of illuminator carriers - Adjustable ease of motion by twisting the knobs Item no.: 435424-9301-000 SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular tube S 20° Binocular tube S 20° Item no.: 435104-9901-000 Binocular tube S 20° for 51-75mm eye distance Item no.: 435104-9901-000 Objective Achromat S 0.63x FWD 107 mm Objective Achromat S 0.63x FWD 107 mm Item no.: 435216-9901-000 Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length) Item no.: 435216-9901-000 Intermediate tube S, fixed 40 mm Intermediate tube S, fixed 40 mm Item no.: 435102-0000-000 Intermediate tube S, fixed 40 mm to increase the viewing height Item no.: 435102-0000-000 Stand N with Column 32/450 mm Stand N with Column 32/450 mm Item no.: 435424-9400-000 Stand base N with stand column 32/450 mm - Stand base 440x370 mm - B/W plastic plate D=84x4 mm - 2 stage clips, safety ring Item no.: 435424-9400-000	Stereomicroscopes Stemi Mount Column 32 with Drive Stemi Mount Column 32 with Drive Item no.: 435424-9301-000 Stemi Mount Column 32 with Drive - Lifting range +/- 25 mm, load capacity max. 5 kg - 2x M8 thread for adaptation of illuminator carriers - Adjustable ease of motion by twisting the knobs Item no.: 435424-9301-000 SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Achromat S 0.5x FWD 134 mm Objective Achromat S 0.5x FWD 134 mm Item no.: 435215-9901-000 Objective Achromat S 0.5x FWD 134 mm (164 mm transfer length) Item no.: 435215-9901-000 Stand base SDA (D) Stand base SDA (D) Item no.: 435412-0000-000 Stand base for stand SDA - Dimensions 350x350x50 mm, weight 30 kg - With rubber feet, 2 recessed grips, central borehole for screwing the vertical stand column SDA 40/610 Item no.: 435412-0000-000 Double Boom SDA (D) Double Boom SDA (D) Item no.: 435411-0000-000 Double boom for stand SDA - Dimensions 670x200x170 mm, load capacity max. 8 kg - With integrated tilting/swivelling head with column 32/200 mm. Also included: vertical stand column SDA 40/610 mm with mounting screw M16. The double extension arm can be rotated 360° around the vertical stand column. Boom length 360-690 mm (center of vertical column to optical axis of stereo microscope carrier - microscope carrier not included) Item no.: 435411-0000-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Intermediate tube S, fixed 40 mm Intermediate tube S, fixed 40 mm Item no.: 435102-0000-000 Intermediate tube S, fixed 40 mm to increase the viewing height Item no.: 435102-0000-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Mount S with diam. 76 mm support Mount S with diam. 76 mm support Item no.: 435402-0000-000 Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns Item no.: 435402-0000-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Controller EMS 3 Controller EMS 3 Item no.: 435610-9012-000 Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable Item no.: 435610-9012-000 System Control Panel SYCOP 3 System Control Panel SYCOP 3 Item no.: 435611-9010-000 System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3 Item no.: 435611-9010-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Intermediate tube S, fixed 40 mm Intermediate tube S, fixed 40 mm Item no.: 435102-0000-000 Intermediate tube S, fixed 40 mm to increase the viewing height Item no.: 435102-0000-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Mount S with diam. 76 mm support Mount S with diam. 76 mm support Item no.: 435402-0000-000 Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns Item no.: 435402-0000-000 Cable EMS3/CMD - focus motor 3 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Intermediate tube S, fixed 40 mm Intermediate tube S, fixed 40 mm Item no.: 435102-0000-000 Intermediate tube S, fixed 40 mm to increase the viewing height Item no.: 435102-0000-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Mount S with diam. 76 mm support Mount S with diam. 76 mm support Item no.: 435402-0000-000 Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns Item no.: 435402-0000-000 VisiLED ring light S 80-55 BF, d=66 mm (D) VisiLED ring light S 80-55 BF, d=66 mm (D) Item no.: 417095-9255-000 VisiLED ring light S 80-55 BF, d=66 mm (D) for bright field, working distance 45...95 mm Item no.: 417095-9255-000 Set for simultanous fixing (D) Set for simultanous fixing (D) Item no.: 417095-9500-000 Set for simultanous fixing (D) for VisiLED BF+DF to objectives S with FWD 40...100 mm Item no.: 417095-9500-000 VisiLED ring light S 40-10 DF (D) VisiLED ring light S 40-10 DF (D) Item no.: 417095-9300-000 VisiLED ring light S 40-10 DF (D) for dark field, working distance 5...15 mm Item no.: 417095-9300-000 Multiple Controller MC 1500 for VisiLED (D) Multiple Controller MC 1500 for VisiLED (D) Item no.: 417095-9000-000 Multiple Controller MC 1500 for VisiLED (D) for 2 VisiLED illuminators, foot switch and RS232 adapter, with 5 segment modes, 4 memory keys, continuous dimming and integrated LED temperature control Item no.: 417095-9000-000 Foot button S (D) Foot button S (D) Item no.: 417095-9020-000 Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300 Item no.: 417095-9020-000 Power supply 100...240V, 50...60Hz (D) Power supply 100...240V, 50...60Hz (D) Item no.: 417095-9050-000 Power supply 100...240V, 50...60Hz (D) for VisiLED Item no.: 417095-9050-000 Gliding stage S 110x110, d=120 mm (D) Gliding stage S 110x110, d=120 mm (D) Item no.: 435461-0000-000 Gliding stage S 110x110, d=120 mm (D) 3-plates stage 267x152x32mm with x-y ball tracks and glass plate 116x116mm; useable with transillumination Item no.: 435461-0000-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 System Control Panel SYCOP 3 System Control Panel SYCOP 3 Item no.: 435611-9010-000 System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3 Item no.: 435611-9010-000 Controller EMS 3 Controller EMS 3 Item no.: 435610-9012-000 Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable Item no.: 435610-9012-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Plan Apo S 1.0x FWD 60 mm Objective Plan Apo S 1.0x FWD 60 mm Item no.: 435203-0000-000 Objective Plan Apo S 1.0x FWD 60 mm (137 mm parfocal length) Item no.: 435203-0000-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Mount S with diam. 76 mm support Mount S with diam. 76 mm support Item no.: 435402-0000-000 Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns Item no.: 435402-0000-000 Cable EMS3/CMD - focus motor 3 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Coaxial epi-illumination S Coaxial epi-illumination S Item no.: 435112-0000-000 Coaxial epi-illumination S mountable at mount S with diam. 76 mm support (435402), recommended for objective Plan Apo S 1,0x (435203), further combinations of objectives S >=1,0x and eyepieces possible Item no.: 435112-0000-000 Foot pedal S Foot pedal S Item no.: 435602-0000-000 Foot pedal S for SYCOP for the continuous control of a microscope parameter at option Item no.: 435602-0000-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular ergo tube S 1.25x 5-45° Binocular ergo tube S 1.25x 5-45° Item no.: 435103-9050-000 Binocular ergo tube S 1.25x 5-45° for 55-75mm eye distance and with eyepiece tubes which are 94 mm longer than those of ergo tube 435100 or 435103-9010; especially for Discovery.V8/V12 used in flow boxes or for an upright posture of the observer Item no.: 435103-9050-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Objective Achromat S 0.63x FWD 107 mm Objective Achromat S 0.63x FWD 107 mm Item no.: 435216-9901-000 Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length) Item no.: 435216-9901-000 Intermediate Y-tube S mot Intermediate Y-tube S mot Item no.: 435103-9030-000 Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m Item no.: 435103-9030-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Coarse/fine drive with column S 490mm Coarse/fine drive with column S 490mm Item no.: 435400-9901-000 Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450 Item no.: 435400-9901-000 Illuminator carrier S, M8-M8 (D) Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Foot button S (D) Foot button S (D) Item no.: 417095-9020-000 Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300 Item no.: 417095-9020-000 Gliding stage S 110x110, d=120 mm (D) Gliding stage S 110x110, d=120 mm (D) Item no.: 435461-0000-000 Gliding stage S 110x110, d=120 mm (D) 3-plates stage 267x152x32mm with x-y ball tracks and glass plate 116x116mm; useable with transillumination Item no.: 435461-0000-000 Objective nosepiece S, coax 3x2 cod Objective nosepiece S, coax 3x2 cod Item no.: 435303-9000-000 Objective nosepiece S, coax 3x2 cod for stereo and axial mode with 3 objectives on SteREO Discovery, switchable coaxial epi-illumination incl. light guide 1500, 2x 4.5/1000mm, to mount at focus drive with profile column as an alternative of 435402 carrier S or 435116 co-observer equipment Item no.: 435303-9000-000 Power supply plug CAN RJ45 DC 24V 30W (D) Power supply plug CAN RJ45 DC 24V 30W (D) Item no.: 000000-0514-784 Power supply plug CAN RJ45 DC 24V 30W (D) for power supply of any coupled CAN items S; incl. mains input plug EU, GB, USA/J, AUS in cardboard box Item no.: 000000-0514-784 Intermediate phototube S, right 50:50/0:100/100:0 Intermediate phototube S, right 50:50/0:100/100:0 Item no.: 435103-9000-000 Intermediate phototube S, right 50:50/0:100/100:0 provides together with binocular tube S in stereo mode: - stereo observation by 50% of brightness and 50% from right channel to camera simultaneously or - 100% from right channel to camera and 100% from left channel to left eye or - 0% to camera and stereo observation by 100% of brightness Item no.: 435103-9000-000 Lambda/4 Cap S, d=66 mm Lambda/4 Cap S, d=66 mm Item no.: 435112-9010-000 Lambda/4 Cap S, d=66 mm for objectives S or Z, D=66 mm, reduces FWD by 7 mm; required to coaxial epi-illuminator S working in axial mode or to Epi-illuminator Z if specular samples are existing Item no.: 435112-9010-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular phototube S 20° Binocular phototube S 20° Item no.: 435107-0000-000 Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435107-0000-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Coarse/fine drive with column S 490mm Coarse/fine drive with column S 490mm Item no.: 435400-9901-000 Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450 Item no.: 435400-9901-000 High Power LED Ring Illuminator, segmentable (HPRL) (D) High Power LED Ring Illuminator, segmentable (HPRL) (D) Item no.: 417040-9300-000 High Power LED Ring Illuminator, segmentable (HPRL) (D) - 8 High Power LEDs with ring optics, optics mountable for near- or far WD range - Near WD range position: FWD 45-130 mm, Illuminance typ. 220 klx (@ FWD 50 mm) - Far WD range position: FWD 80-300 mm, Illuminance typ. 170 klx (@ FWD 90 mm) - Correlated color temperature ca. 5800 K, lifetime ca. 25.000 h (lumen maintenance 70 %) - Ergonomic operation integrated in housing: no controller box needed - Encoder 1 for setting of segment modes, turning in 45° steps and auto rotation - Encoder 2 for dimming, storage and recall of one illumination setting - Separate On/Off switch - Segment modes: full, half, quarter circle, two opposite quarter circles - Interface to objective: D=66 mm - ESD socket for controlled discharge of electrostatic load - Thread to mount accessories (Polarization Filter Set, Diffusor) - incl. wide-range power supply and 4 adapters EU, US, CH, JP Item no.: 417040-9300-000 Intermediate LED tube S, 38HE GFP Intermediate LED tube S, 38HE GFP Item no.: 435123-9381-000 Intermediate LED tube S, 38HE GFP Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 38HE (EX BP 470/40, BS FT 495, EM BP 525/50), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m Item no.: 435123-9381-000 Intermediate LED tube S, 69 FITC Intermediate LED tube S, 69 FITC Item no.: 435123-9691-000 Intermediate LED tube S, 69 FITC Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 69 (EX BP 470/35, BS FT 499, EM 560/100), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m Item no.: 435123-9691-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular phototube S 20° Binocular phototube S 20° Item no.: 435107-0000-000 Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435107-0000-000 Objective Plan S 1.0x FWD 81 mm Objective Plan S 1.0x FWD 81 mm Item no.: 435200-0000-000 Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length) Item no.: 435200-0000-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Mount S with diam. 76 mm support Mount S with diam. 76 mm support Item no.: 435402-0000-000 Microscope carrier for stereo and zoom microscopes - With diam. 76 mm mount - For T- and profile columns Item no.: 435402-0000-000 Coarse/fine drive with column S 490mm Coarse/fine drive with column S 490mm Item no.: 435400-9901-000 Profile column 490 mm with coarse/fine focusing - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450 Item no.: 435400-9901-000 Focusing attachment d=6 mm without filters Focusing attachment d=6 mm without filters Item no.: 435540-9003-000 Focusing attachment d=6 mm without filters Item no.: 435540-9003-000 Illuminator carrier S, M8-M8 (D) Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Spacing rod S Spacing rod S Item no.: 435440-0000-000 Spacing rod S Item no.: 435440-0000-000 Foot button S (D) Foot button S (D) Item no.: 417095-9020-000 Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300 Item no.: 417095-9020-000 Filter cube 43 Cy3/Rhod/RFP (D) Filter cube 43 Cy3/Rhod/RFP (D) Item no.: 435115-5043-000 Filter cube 43 Cy3/Rhod/RFP (D) EX BP 545/25, BS FT 565, EM BP 606/70 Item no.: 435115-5043-000 Filter cube 38 GFP BP (D) Filter cube 38 GFP BP (D) Item no.: 435115-5038-000 Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50 Item no.: 435115-5038-000 PentaFluar S 120 vertical illuminator (D) PentaFluar S 120 vertical illuminator (D) Item no.: 435115-0000-000 PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator Item no.: 435115-0000-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Manual Rotary Control MARC Manual Rotary Control MARC Item no.: 435604-0000-000 Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m Item no.: 435604-0000-000 Binocular phototube S 20° Binocular phototube S 20° Item no.: 435107-0000-000 Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435107-0000-000 Objective Plan Apo S 1.5x FWD 30 mm Objective Plan Apo S 1.5x FWD 30 mm Item no.: 435226-0000-000 Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length) Item no.: 435226-0000-000 Objective Plan Apo S 1.0x FWD 60 mm Objective Plan Apo S 1.0x FWD 60 mm Item no.: 435203-0000-000 Objective Plan Apo S 1.0x FWD 60 mm (137 mm parfocal length) Item no.: 435203-0000-000 Objective Achromat S 0.63x FWD 107 mm Objective Achromat S 0.63x FWD 107 mm Item no.: 435216-9901-000 Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length) Item no.: 435216-9901-000 Intermediate Y-tube S mot Intermediate Y-tube S mot Item no.: 435103-9030-000 Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m Item no.: 435103-9030-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 VisiLED slim ring light S BF, d=66mm (D) VisiLED slim ring light S BF, d=66mm (D) Item no.: 417095-9150-000 VisiLED slim ring light S BF, d=66mm (D) incl. 2 focus rings: f50 ring lens with FWD 40-90mm and f25 ring mirror with FWD 20-40mm; 2 pcs. ring illuminator are mountable side by side at objective nosepiece of SteREO Discovery or Axio Zoom Item no.: 417095-9150-000 Spacing ring S, d=66 x 40 mm Spacing ring S, d=66 x 40 mm Item no.: 435449-0000-000 Spacing ring S, d=66 x 40 mm elongates the diam. 66 mm objective barrel by 40 mm, e.g. for mounting of dark-field ring illuminator on Discovery objective Achromat 1x or 1.25x or Plan Apo 1x or twice used on Achromat 0.63x Item no.: 435449-0000-000 Dark-field ring for slim VisiLED (D) Dark-field ring for slim VisiLED (D) Item no.: 417095-9810-000 Ring mirror f10 for VisiLED Slim (D) FWD 5-20 mm for gray and dark field, suited as incident illumination for objectives 2.3x Item no.: 417095-9810-000 Multiple Controller MC 1500 for VisiLED (D) Multiple Controller MC 1500 for VisiLED (D) Item no.: 417095-9000-000 Multiple Controller MC 1500 for VisiLED (D) for 2 VisiLED illuminators, foot switch and RS232 adapter, with 5 segment modes, 4 memory keys, continuous dimming and integrated LED temperature control Item no.: 417095-9000-000 Power supply 100...240V, 50...60Hz (D) Power supply 100...240V, 50...60Hz (D) Item no.: 417095-9050-000 Power supply 100...240V, 50...60Hz (D) for VisiLED Item no.: 417095-9050-000 Foot button S (D) Foot button S (D) Item no.: 417095-9020-000 Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300 Item no.: 417095-9020-000 Mechanical stage S 150x100 R (D) Mechanical stage S 150x100 R (D) Item no.: 435465-9010-000 Mechanical stage S 150x100 R (D) 3-plates mechanical stage 322x251x28 mm for max. load 3 kg; with horizontal coaxial drive 115 mm right, interface d=120 mm and 237x157 mm support for insert plate S; useable with transillumination Item no.: 435465-9010-000 Objective nosepiece S, coax 3x2 cod Objective nosepiece S, coax 3x2 cod Item no.: 435303-9000-000 Objective nosepiece S, coax 3x2 cod for stereo and axial mode with 3 objectives on SteREO Discovery, switchable coaxial epi-illumination incl. light guide 1500, 2x 4.5/1000mm, to mount at focus drive with profile column as an alternative of 435402 carrier S or 435116 co-observer equipment Item no.: 435303-9000-000 Power supply plug CAN RJ45 DC 24V 30W (D) Power supply plug CAN RJ45 DC 24V 30W (D) Item no.: 000000-0514-784 Power supply plug CAN RJ45 DC 24V 30W (D) for power supply of any coupled CAN items S; incl. mains input plug EU, GB, USA/J, AUS in cardboard box Item no.: 000000-0514-784 Lambda/4 Cap S, d=66 mm Lambda/4 Cap S, d=66 mm Item no.: 435112-9010-000 Lambda/4 Cap S, d=66 mm for objectives S or Z, D=66 mm, reduces FWD by 7 mm; required to coaxial epi-illuminator S working in axial mode or to Epi-illuminator Z if specular samples are existing Item no.: 435112-9010-000 Insert plate S, metal 237x157x3mm (D) Insert plate S, metal 237x157x3mm (D) Item no.: 435465-9052-000 Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100 Item no.: 435465-9052-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 Controller EMS 3 Controller EMS 3 Item no.: 435610-9012-000 Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable Item no.: 435610-9012-000 System Control Panel SYCOP 3 System Control Panel SYCOP 3 Item no.: 435611-9010-000 System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3 Item no.: 435611-9010-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Achromat S 1.0x FWD 63 mm Objective Achromat S 1.0x FWD 63 mm Item no.: 435217-9901-000 Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length) Item no.: 435217-9901-000 Objective Achromat S 1.5x FWD 28 mm Objective Achromat S 1.5x FWD 28 mm Item no.: 435228-9901-000 Objective Achromat S 1.5x FWD 28 mm (93 mm parfocal length) Item no.: 435228-9901-000 Objective Plan Apo S 3.5x mono FWD 16 mm Objective Plan Apo S 3.5x mono FWD 16 mm Item no.: 435250-0000-000 Objective Plan Apo S 3.5x mono FWD 16 mm for vertical 2D imaging on SteREO Discovery, mountable at nosepiece 6x cod by 435306-9000 or at objective slider S/doc by 435304 Item no.: 435250-0000-000 Intermediate Y-tube S, switchable Intermediate Y-tube S, switchable Item no.: 435117-0000-000 Intermediate Y-tube S, switchable switching by push rod between stereoscopic viewing (3D) and binocular vertical viewing (2D) through right channel of Discovery body with 435301 objective slider S/doc or 435302 or 435303-9000 nosepiece S/doc Item no.: 435117-0000-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Cable EMS3/CMD - focus motor 3 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Illuminator carrier S, M8-M8 (D) Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Spacing ring M62, d=66x16 mm Spacing ring M62, d=66x16 mm Item no.: 435307-0000-000 Spacing ring M62, d=66x16 mm required with 435506 ring illuminator and PlanApo Z 0.5x or Achromat S 0.3x/0.5x/0.63x/1.0x in -9901 version with M62 Item no.: 435307-0000-000 Gliding stage S 110x110, d=120 mm (D) Gliding stage S 110x110, d=120 mm (D) Item no.: 435461-0000-000 Gliding stage S 110x110, d=120 mm (D) 3-plates stage 267x152x32mm with x-y ball tracks and glass plate 116x116mm; useable with transillumination Item no.: 435461-0000-000 Objective nosepiece S/doc, 3fold, 6x cod Objective nosepiece S/doc, 3fold, 6x cod Item no.: 435302-0000-000 Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment Item no.: 435302-0000-000 Rings for nosepiece 6x cod + objective mono Rings for nosepiece 6x cod + objective mono Item no.: 435306-9000-000 Rings for nosepiece 6x cod + objective mono M40/M60 ring provides parfocality of Plan Apo S 3.5x mono with Achromat S 1.0x / 1.25x / 1.5x on nosepiece and the d=66x45 mm sleeve supports d=66 mm accessories Item no.: 435306-9000-000 PentaFluar S 120 vertical illuminator (D) PentaFluar S 120 vertical illuminator (D) Item no.: 435115-0000-000 PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator Item no.: 435115-0000-000 Filter cube 38 GFP BP (D) Filter cube 38 GFP BP (D) Item no.: 435115-5038-000 Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50 Item no.: 435115-5038-000 Filter cube 120 UV/DAPI LP (D) Filter cube 120 UV/DAPI LP (D) Item no.: 435115-5120-000 Filter cube 120 UV/DAPI LP (D) EX BP 375/28, BS FT 415, EM LP 435 Item no.: 435115-5120-000 Stage diaphragm d= 84/40 mm Stage diaphragm d= 84/40 mm Item no.: 455140-0111-000 Stage diaphragm d= 84/40 mm Item no.: 455140-0111-000 Mounting frame 116x116 / 84 mm (D) Mounting frame 116x116 / 84 mm (D) Item no.: 435461-9001-000 Mounting frame 116x116 / 84 mm (D) Item no.: 435461-9001-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 System Control Panel SYCOP 3 System Control Panel SYCOP 3 Item no.: 435611-9010-000 System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3 Item no.: 435611-9010-000 Controller EMS 3 Controller EMS 3 Item no.: 435610-9012-000 Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable Item no.: 435610-9012-000 Binocular ergo phototube S 5-45° Binocular ergo phototube S 5-45° Item no.: 435100-0000-000 Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N Item no.: 435100-0000-000 Objective Achromat S 1.0x FWD 63 mm Objective Achromat S 1.0x FWD 63 mm Item no.: 435217-9901-000 Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length) Item no.: 435217-9901-000 Objective Achromat S 1.5x FWD 28 mm Objective Achromat S 1.5x FWD 28 mm Item no.: 435228-9901-000 Objective Achromat S 1.5x FWD 28 mm (93 mm parfocal length) Item no.: 435228-9901-000 Objective Plan Apo S 3.5x mono FWD 16 mm Objective Plan Apo S 3.5x mono FWD 16 mm Item no.: 435250-0000-000 Objective Plan Apo S 3.5x mono FWD 16 mm for vertical 2D imaging on SteREO Discovery, mountable at nosepiece 6x cod by 435306-9000 or at objective slider S/doc by 435304 Item no.: 435250-0000-000 Intermediate Y-tube S mot Intermediate Y-tube S mot Item no.: 435103-9030-000 Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m Item no.: 435103-9030-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Cable EMS3/CMD - focus motor 3 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Spacing ring M62, d=66x16 mm Spacing ring M62, d=66x16 mm Item no.: 435307-0000-000 Spacing ring M62, d=66x16 mm required with 435506 ring illuminator and PlanApo Z 0.5x or Achromat S 0.3x/0.5x/0.63x/1.0x in -9901 version with M62 Item no.: 435307-0000-000 Foot button S (D) Foot button S (D) Item no.: 417095-9020-000 Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300 Item no.: 417095-9020-000 Illuminator carrier S, M8-M8 (D) Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Illuminator carrier S, M8-M8 (D) Item no.: 435441-0000-000 Gliding stage S 110x110, d=120 mm (D) Gliding stage S 110x110, d=120 mm (D) Item no.: 435461-0000-000 Gliding stage S 110x110, d=120 mm (D) 3-plates stage 267x152x32mm with x-y ball tracks and glass plate 116x116mm; useable with transillumination Item no.: 435461-0000-000 Objective nosepiece S/doc, 3fold, 6x cod Objective nosepiece S/doc, 3fold, 6x cod Item no.: 435302-0000-000 Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment Item no.: 435302-0000-000 Rings for nosepiece 6x cod + objective mono Rings for nosepiece 6x cod + objective mono Item no.: 435306-9000-000 Rings for nosepiece 6x cod + objective mono M40/M60 ring provides parfocality of Plan Apo S 3.5x mono with Achromat S 1.0x / 1.25x / 1.5x on nosepiece and the d=66x45 mm sleeve supports d=66 mm accessories Item no.: 435306-9000-000 Filter cube 43 Cy3/Rhod/RFP (D) Filter cube 43 Cy3/Rhod/RFP (D) Item no.: 435115-5043-000 Filter cube 43 Cy3/Rhod/RFP (D) EX BP 545/25, BS FT 565, EM BP 606/70 Item no.: 435115-5043-000 Filter cube 38 GFP BP (D) Filter cube 38 GFP BP (D) Item no.: 435115-5038-000 Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50 Item no.: 435115-5038-000 Filter cube 120 UV/DAPI LP (D) Filter cube 120 UV/DAPI LP (D) Item no.: 435115-5120-000 Filter cube 120 UV/DAPI LP (D) EX BP 375/28, BS FT 415, EM LP 435 Item no.: 435115-5120-000 PentaFluar S 120 vertical illuminator (D) PentaFluar S 120 vertical illuminator (D) Item no.: 435115-0000-000 PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator Item no.: 435115-0000-000 Stage diaphragm d= 84/40 mm Stage diaphragm d= 84/40 mm Item no.: 455140-0111-000 Stage diaphragm d= 84/40 mm Item no.: 455140-0111-000 Mounting frame 116x116 / 84 mm (D) Mounting frame 116x116 / 84 mm (D) Item no.: 435461-9001-000 Mounting frame 116x116 / 84 mm (D) Item no.: 435461-9001-000	Stereomicroscopes SteREO Discovery.V12 microscope body SteREO Discovery.V12 microscope body Item no.: 435001-9901-000 Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required Item no.: 435001-9901-000 System Control Panel SYCOP 3 System Control Panel SYCOP 3 Item no.: 435611-9010-000 System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3 Item no.: 435611-9010-000 Manual Rotary Control MARC Manual Rotary Control MARC Item no.: 435604-0000-000 Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m Item no.: 435604-0000-000 Controller EMS 3 Controller EMS 3 Item no.: 435610-9012-000 Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, additionally required: Cable EMS3-motor focus 3(435403-9030-000) or Cable EMS3-motor focus 2 (435610-5003-000), - 1x SYCOP 3, 2x footswitch (focus, zoom), - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB-C to workstation, incl. USB-C/USB3.0 cable 2m and country-specificpower cable Item no.: 435610-9012-000 Human Interface Panel HIP Human Interface Panel HIP Item no.: 435601-0000-000 Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS Item no.: 435601-0000-000 Binocular tube S 20° Binocular tube S 20° Item no.: 435104-9901-000 Binocular tube S 20° for 51-75mm eye distance Item no.: 435104-9901-000 Objective Plan Apo S 1.5x FWD 30 mm Objective Plan Apo S 1.5x FWD 30 mm Item no.: 435226-0000-000 Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length) Item no.: 435226-0000-000 Motor focus 3 with column S 490mm Motor focus 3 with column S 490mm Item no.: 435403-9001-000 Profile column 490 mm with motor focus 3 - Central assembly on stand bases 300, 450 and transillumination unit 300. Interface to mount a HIP operation unit. Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450 Item no.: 435403-9001-000 Stand base 450 Stand base 450 Item no.: 435430-9903-000 Stand base 450 WxDxH 449x346x30 mm stand base with 3x M8 threaded holes, insert plate 450 and B/W plate D=120 mm; compatible with: - profile columns 490 mm, 800 mm or T-profile column 350 mm - transillumination units 450 or 450 mot - VisiLED transmitted light (417095-9400); - stages for interface d=120 mm For stages d=84 mm additionally needed: adapter 84/120 (435430-9010) Item no.: 435430-9903-000 Cable EMS3/CMD - focus motor 3 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Cable EMS3/CMD - focus motor 3 Item no.: 435403-9030-000 Measuring stage S 150x100 mot; CAN (D) Measuring stage S 150x100 mot; CAN (D) Item no.: 435465-9020-000 Measuring stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors, encoders and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 1µm - absolute accuracy +/- 2µm - interface d=120mm, BNC trigger and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination Item no.: 435465-9020-000 Objective nosepiece S/doc, 3fold, 6x cod Objective nosepiece S/doc, 3fold, 6x cod Item no.: 435302-0000-000 Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment Item no.: 435302-0000-000 Adapter frame S 160x116 epi-illumination (D) Adapter frame S 160x116 epi-illumination (D) Item no.: 435465-9050-000 Adapter frame S 160x116 epi-illumination (D) holding frames and plates 160x116 of Axio Imager are adapted to stages S 150x100, using together with transillumination top 450 mot (435500-9000) is not allowed Item no.: 435465-9050-000 Insert plate S, metal 237x157x3mm (D) Insert plate S, metal 237x157x3mm (D) Item no.: 435465-9052-000 Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100 Item no.: 435465-9052-000 Intermediate phototube S mot, right 100/100 Intermediate phototube S mot, right 100/100 Item no.: 435118-0000-000 Intermediate phototube S mot, right 100/100 motorized alternation per CAN command or push button between 100% light for camera or 100% for right eye; power supply by CAN distributor or plug-in supply RJ45-CAN via its 2 sockets; incl. 2 cables 0.5m and 1m Item no.: 435118-0000-000
Packing and dust protection	Packing and dust protection Dust cover K L300xW190xH500 mm Dust cover K L300xW190xH500 mm Item no.: 459325-0000-000 Dust cover K L300xB190xH500 mm Item no.: 459325-0000-000	Packing and dust protection Dust cover K L300xW190xH500 mm Dust cover K L300xW190xH500 mm Item no.: 459325-0000-000 Dust cover K L300xB190xH500 mm Item no.: 459325-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000	Packing and dust protection Dust protection Set L Dust protection Set L Item no.: 434304-0000-000 Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm Item no.: 434304-0000-000	Packing and dust protection Dust protection Set L Dust protection Set L Item no.: 434304-0000-000 Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm Item no.: 434304-0000-000	Packing and dust protection Dust protection Set M Dust protection Set M Item no.: 434303-0000-000 Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics Item no.: 434303-0000-000
Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings	Lamps and Lamp housings Flexible light guide, 2 branches 4.5/1000 mm (D) Flexible light guide, 2 branches 4.5/1000 mm (D) Item no.: 417075-9004-000 Flexible light guide, 2 branches 4.5/1000 mm (D) for KL 1500 / 2500 Item no.: 417075-9004-000 Cold-light source CL 9000 LED CAN (D) Cold-light source CL 9000 LED CAN (D) Item no.: 435700-9000-000 Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9000-000 Halogen Light Filter CL LED (D) Halogen Light Filter CL LED (D) Item no.: 435700-9020-000 Halogen Light Filter CL LED (D) Item no.: 435700-9020-000 Day Light Filter CL LED (D) Day Light Filter CL LED (D) Item no.: 435700-9021-000 Day Light Filter CL LED (D) Item no.: 435700-9021-000	Lamps and Lamp housings Cold-light source CL 6000 LED (D) Cold-light source CL 6000 LED (D) Item no.: 435700-9101-000 Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9101-000 Clamp S to light guide (D) Clamp S to light guide (D) Item no.: 435442-0000-000 Clamp S to light guide (D) Item no.: 435442-0000-000 Focusing attachment d=10 mm (D) Focusing attachment d=10 mm (D) Item no.: 417089-0000-000 Focusing attachment d=10 mm (D) Item no.: 417089-0000-000 Flexible light guide 1500, 8/1000 mm (D) Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000 Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000	Lamps and Lamp housings	Lamps and Lamp housings Cold-light source CL 6000 LED (D) Cold-light source CL 6000 LED (D) Item no.: 435700-9101-000 Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9101-000 Clamp S to light guide (D) Clamp S to light guide (D) Item no.: 435442-0000-000 Clamp S to light guide (D) Item no.: 435442-0000-000 Flexible light guide, 2 branches 4.5/1000 mm (D) Flexible light guide, 2 branches 4.5/1000 mm (D) Item no.: 417075-9004-000 Flexible light guide, 2 branches 4.5/1000 mm (D) for KL 1500 / 2500 Item no.: 417075-9004-000 Illuminator HXP 120 V (D) Illuminator HXP 120 V (D) Item no.: 423013-9010-000 Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN. Item no.: 423013-9010-000 Neutral Filter 0.25 CL LED (D) Neutral Filter 0.25 CL LED (D) Item no.: 435700-9026-000 Neutral Filter 0.25 CL LED (D) Item no.: 435700-9026-000	Lamps and Lamp housings Cold-light source CL 6000 LED (D) Cold-light source CL 6000 LED (D) Item no.: 435700-9101-000 Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9101-000	Lamps and Lamp housings Cold-light source CL 9000 LED CAN (D) Cold-light source CL 9000 LED CAN (D) Item no.: 435700-9000-000 Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9000-000 Clamp S to light guide (D) Clamp S to light guide (D) Item no.: 435442-0000-000 Clamp S to light guide (D) Item no.: 435442-0000-000 Flexible light guide 1500, 8/1000 mm (D) Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000 Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000 Illuminator HXP 120 V (D) Illuminator HXP 120 V (D) Item no.: 423013-9010-000 Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN. Item no.: 423013-9010-000 Shutter remote control for HXP 120 V Shutter remote control for HXP 120 V Item no.: 000000-0544-644 Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch. Item no.: 000000-0544-644 Day Light Filter CL LED (D) Day Light Filter CL LED (D) Item no.: 435700-9021-000 Day Light Filter CL LED (D) Item no.: 435700-9021-000 Slit-ring illuminator d=66 mm without light guide (D) Slit-ring illuminator d=66 mm without light guide (D) Item no.: 435506-0000-000 Slit-ring illuminator d=66 mm without light guide (D) useable with 417063-9901 light guide 8/1000mm and objective nosepiece S/doc 435302 or Z 435380-9000 Item no.: 435506-0000-000 Light-conducting rod 13 mm (D) Light-conducting rod 13 mm (D) Item no.: 435511-0000-000 Light-conducting rod 13 mm (D) required with 435506 ring illuminator and Plan Apo Z 0.5x / S 1.0x / S 3.5x mono or Achromat S 1.5x or PlanNeoFluar Z 1.0x, to that 2 light-conducting rods are required Item no.: 435511-0000-000 Halogen Light Filter CL LED (D) Halogen Light Filter CL LED (D) Item no.: 435700-9020-000 Halogen Light Filter CL LED (D) Item no.: 435700-9020-000	Lamps and Lamp housings Cold-light source CL 9000 LED CAN (D) Cold-light source CL 9000 LED CAN (D) Item no.: 435700-9000-000 Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9000-000 Clamp S to light guide (D) Clamp S to light guide (D) Item no.: 435442-0000-000 Clamp S to light guide (D) Item no.: 435442-0000-000 Flexible light guide 1500, 8/1000 mm (D) Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000 Flexible light guide 1500, 8/1000 mm (D) Item no.: 417063-9901-000 Illuminator HXP 120 V (D) Illuminator HXP 120 V (D) Item no.: 423013-9010-000 Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN. Item no.: 423013-9010-000 Shutter remote control for HXP 120 V Shutter remote control for HXP 120 V Item no.: 000000-0544-644 Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch. Item no.: 000000-0544-644 Slit-ring illuminator d=66 mm without light guide (D) Slit-ring illuminator d=66 mm without light guide (D) Item no.: 435506-0000-000 Slit-ring illuminator d=66 mm without light guide (D) useable with 417063-9901 light guide 8/1000mm and objective nosepiece S/doc 435302 or Z 435380-9000 Item no.: 435506-0000-000 Light-conducting rod 13 mm (D) Light-conducting rod 13 mm (D) Item no.: 435511-0000-000 Light-conducting rod 13 mm (D) required with 435506 ring illuminator and Plan Apo Z 0.5x / S 1.0x / S 3.5x mono or Achromat S 1.5x or PlanNeoFluar Z 1.0x, to that 2 light-conducting rods are required Item no.: 435511-0000-000	Lamps and Lamp housings Cold-light source CL 9000 LED CAN (D) Cold-light source CL 9000 LED CAN (D) Item no.: 435700-9000-000 Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg Item no.: 435700-9000-000 Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D) Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D) Item no.: 435540-9005-000 Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D) Item no.: 435540-9005-000 Day Light Filter CL LED (D) Day Light Filter CL LED (D) Item no.: 435700-9021-000 Day Light Filter CL LED (D) Item no.: 435700-9021-000
Bulbs	Bulbs	Bulbs	Bulbs	Bulbs	Bulbs	Bulbs	Bulbs	Bulbs	Bulbs Bulb mercury short-arc HXP 120 (D) Bulb mercury short-arc HXP 120 (D) Item no.: 000000-0482-730 Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h Item no.: 000000-0482-730	Bulbs	Bulbs Bulb mercury short-arc HXP 120 (D) Bulb mercury short-arc HXP 120 (D) Item no.: 000000-0482-730 Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h Item no.: 000000-0482-730	Bulbs Bulb mercury short-arc HXP 120 (D) Bulb mercury short-arc HXP 120 (D) Item no.: 000000-0482-730 Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h Item no.: 000000-0482-730	Bulbs
Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories	Stand accessories Table-top base for MARC Table-top base for MARC Item no.: 435604-9010-000 Table-top base for MARC to accept Coaxial MARC, allows positioning on the desk as required; incl. cable CAN RJ45 1.0m Item no.: 435604-9010-000	Stand accessories	Stand accessories	Stand accessories
Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories	Stages and accessories Adapter plate CorrMic with SEM interface; 160x116 (D) Adapter plate CorrMic with SEM interface; 160x116 (D) Item no.: 432335-9181-000 Adapter plate CorrMic with SEM interface; 160x116 (D) - for mounting of specimen holders CorrMic MAT with SEM adapter - plate size 160x116 Item no.: 432335-9181-000 Specimen holder CorrMic MAT Universal B Rev.2 (D) Specimen holder CorrMic MAT Universal B Rev.2 (D) Item no.: 432335-9102-000 Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage Item no.: 432335-9102-000
Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices	Video devices Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° Item no.: 426113-9010-000 Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg Item no.: 426113-9010-000
Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing	Image processing Microscopy Workstation Premium (HP Z8 G5) (O) Microscopy Workstation Premium (HP Z8 G5) (O) Item no.: 410203-9914-000 Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit Item no.: 410203-9914-000 System Configuration 2b for HP Z8 G5 System Configuration 2b for HP Z8 G5 Item no.: 000000-2677-269 System Configuration 2b for HP Z8 G5 Installation of Windows 11 IoT Enterprise LTSC 2024 x64 incl. Windows 11 License - With ZEN Software Installation and System Integration of Respective System - for Widefield, Celldiscoverer 7, LSM 900/910, LSM 980/990, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 000000-2677-269 Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Item no.: 410330-1100-000 Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Default processor configuration - Intel Xeon W5-3425 (3.2 GHz, 30 MB cache, 12 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 410330-1100-000 Graphics Card NVIDIA RTX A4000 16 GB DP (O) Graphics Card NVIDIA RTX A4000 16 GB DP (O) Item no.: 410331-2800-000 Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel) Item no.: 410331-2800-000 Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) Item no.: 410303-3206-000 Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5 Item no.: 410303-3206-000 Language Pack English US (O) Language Pack English US (O) Item no.: 410380-0200-000 Language Pack English US (O) - Keyboard with English (US) layout Item no.: 410380-0200-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Item no.: 410350-2408-000 Monitor TFT 24" HP Series 7 Pro 724pn (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 100 Hz Brightness: 350 nits Contrast: 1500:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort1.2, HDMI 1.4 Data connectors: 4 x USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 36 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.14 cm x 53.17 cm x 19.5 cm Weight incl. stand: 4.8 kg Ergonomic features:Tilt: -5°to +20°, Swivel:-45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable Item no.: 410350-2408-000 Microscopy Camera Axiocam 705 color R2 (D) Microscopy Camera Axiocam 705 color R2 (D) Item no.: 426560-9051-000 Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: < 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center. Item no.: 426560-9051-000