Axio Imager Vario

Microscope Axio Imager.Z2 Vario

Item no.: 490025-0003-000 (individual configuration)

Description

Microscope Axio Imager.Z2 Vario for reflected-light bright field/dark field and DIC.

Full description

Microscope Axio Imager.Z2 Vario

Item Number: 490025-0003-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Measurement Software

0 added 0 removed

License software

0 added 0 removed

Stand column man. with base plate Axio Imager Vario (D)

Recover

Item no.: 430025-9050-000

Stand column man. with base plate Axio Imager Vario (D)

Item Number: 430025-9050-000

Stand column man. with base plate Axio Imager Vario (D) Base plate 700x574 mm for stages up to 300x300 mm - height adjustment 250 mm - max. sample height 254 mm without stage - max. sample height 112 mm with stage for reflected-light application - max. sample height 88 mm with stage for transmitted-light application
Microscope module Axio Imager.Z2 Vario mot. with control box

Recover

Item no.: 430020-9001-000

Microscope module Axio Imager.Z2 Vario mot. with control box

Item Number: 430020-9001-000

Microscope module Axio Imager.Z2 Vario mot. with control box - motorized objective focusing - stepsize resolution 10 nm - 5 mm focus range - Light Control mot. - main controller incl. USB-A, USB-C and TCP/IP interface - mount for objective nosepiece mot. and reflector turret mot. - reflected-light illumination mot. with shutter and diffusion disk - mount for stop slider man. and mot. - connection for focus linear sensor - 12V DC 100W power unit, stabilized, 100...127/200...240V AC autorange 50...60Hz/168VA - country-specific line cable and USB cable

Stand accessories

0 added 0 removed

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario

Recover

Item no.: 424514-9010-000

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario

Item Number: 424514-9010-000

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario
Double filter wheel, discrete, mot., 2x4 positions

Recover

Item no.: 428301-9901-000

Double filter wheel, discrete, mot., 2x4 positions

Item Number: 428301-9901-000

Double filter wheel, discrete, mot., 2x4 positions each to accept neutral-density filter set and dia. 25 mm color filters. For use in transmitted-light and reflected-light equipments mot.
6-position reflector turret mot. ACR Axio Imager Vario for P&C modules

Recover

Item no.: 424916-9010-000

6-position reflector turret mot. ACR Axio Imager Vario for P&C modules

Item Number: 424916-9010-000

6-position reflector turret mot. ACR Axio Imager Vario for P&C modules with automatic filter set and contrast module recognition
Docking station with TFT display for Axio Examiner/Axio Imager Vario

Recover

Item no.: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario

Item Number: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario Control module with TFT display, coaxial coarse/fine focusing knobs and freely programmable buttons for the control of motorized Axio Examiner and Axio Imager.Z2 Vario components. Positioning on the desk as required. 30°-45° tilt adjustment of the TFT display
Controler cable 2 m for Axio Imager Vario

Recover

Item no.: 432610-9080-000

Controler cable 2 m for Axio Imager Vario

Item Number: 432610-9080-000

Controler cable 2 m for Axio Imager Vario to the connection of the control-box with microscope module

Stop slider mot. with centerable aperture stop

Recover

Item no.: 423614-9901-000

Stop slider mot. with centerable aperture stop

Item Number: 423614-9901-000

Stop slider mot. with centerable aperture stop
Stop slider mot. with centerable luminous-field diaphragm

Recover

Item no.: 423612-9901-000

Stop slider mot. with centerable luminous-field diaphragm

Item Number: 423612-9901-000

Stop slider mot. with centerable luminous-field diaphragm
Reflector module DIC/Pol ACR P&C shift free for reflected light

Recover

Item no.: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light

Item Number: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other
Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light
Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Illuminator microLED 3

Recover

Item no.: 423053-9074-000

Illuminator microLED 3

Item Number: 423053-9074-000

Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90

Bulbs

0 added 0 removed

Polarization

0 added 0 removed

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Recover

Item no.: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Item Number: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50
DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Recover

Item no.: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Item Number: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75
Compensator mount 6x20 with DF stop

Recover

Item no.: 424706-0000-000

Compensator mount 6x20 with DF stop

Item Number: 424706-0000-000

Compensator mount 6x20 with DF stop

Stages and accessories

0 added 0 removed

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario

Recover

Item no.: 432036-9020-000

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario

Item Number: 432036-9020-000

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario - stepper motor with 4 mm spindle pitch - connection to stepper controller - travel range 200 mm x 200 mm - flat surface 325 mm x 410 mm - max load: 3 kg - max speed 45 mm/s - resolution: 0.2 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - for stage inserts 246 x 246 mm
Metal Insert Plate, frame size 246x246 mm (D)

Recover

Item no.: 432324-9000-000

Metal Insert Plate, frame size 246x246 mm (D)

Item Number: 432324-9000-000

Metal Insert Plate, frame size 246x246 mm (D) for mechanical stage 200x200 and Scanning stages 200x200 and 300x300
Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Tubes and accessories

0 added 0 removed

Binocular phototube 15°/25 (100:0/0:100), upright image

Recover

Item no.: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image

Item Number: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image adjustable stop, camera port with interface 60N

Optovar systems

0 added 0 removed

Filters

0 added 0 removed

Conversion filter 5700-3200 K, d=25 mm

Recover

Item no.: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm

Item Number: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light
Neutral-density filter set D/A, d=25

Recover

Item no.: 487931-9901-000

Neutral-density filter set D/A, d=25

Item Number: 487931-9901-000

Neutral-density filter set D/A, d=25 attenuation up to 0.0028 % possible. For integration in filter wheels, discrete, man. or mot. Not usable for HBO/XBO

Photomicrography

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/25 Br. foc.

Recover

Item no.: 444034-9000-000

Eyepiece PL 10x/25 Br. foc.

Item Number: 444034-9000-000

Eyepiece PL 10x/25 Br. foc.

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Recover

Item no.: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Item Number: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm)
Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Recover

Item no.: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Item Number: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm)
Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Recover

Item no.: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Item Number: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm)
Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Recover

Item no.: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Item Number: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm)
Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Recover

Item no.: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Item Number: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm)

Condensers

0 added 0 removed

Connecting cables

0 added 0 removed

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Control devices

0 added 0 removed

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Image processing

0 added 0 removed

Protection cap set

Recover

Item no.: 434302-0000-000

Protection cap set

Item Number: 434302-0000-000

Protection cap set consisting of eyepiece cover and protection cap for luminous-field diaphragm optics
Dust cover for Axio Imager Vario

Recover

Item no.: 459336-0000-000

Dust cover for Axio Imager Vario

Item Number: 459336-0000-000

Dust cover for Axio Imager Vario (L770xB550xH550 mm)

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Microscope Axio Imager.Z2 Vario
Item Number: 490025-0003-000 (individual configuration)
Measurement Software (3)

NEO Software

Item has been added to the configuration

NEO autocad in, BasLic, PC

Recover

Item no.: 662002-0206-103

NEO autocad in, BasLic, PC

Item Number: 662002-0206-103

NEO autocad in, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software interface for import of CAD data im dxf- and dwg format

Item has been added to the configuration

NEO pixel, BasLic, PC

Recover

Item no.: 662002-0206-006

NEO pixel, BasLic, PC

Item Number: 662002-0206-006

NEO pixel, BasLic, PC - basic license for software in current version - PC-bound license - measurement data obtained from image data Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click & Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

NEO q-das out, BasLic, PC

Recover

Item no.: 662002-0206-002

NEO q-das out, BasLic, PC

Item Number: 662002-0206-002

NEO q-das out, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

License software (4)

NEO

Item has been added to the configuration

ZAPHIRE autocad in, BasLic, PC

Recover

Item no.: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC

Item Number: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for import of CAD data im dxf- and dwg format

Item has been added to the configuration

ZAPHIRE PiWeb reporting plus, BasLic, PC

Recover

Item no.: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC

Item Number: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software option for statistical evaluations with graphical display of results - simulataneous measuring and data evaluation - evaluations of up to 1000 measurement processes per inspection plan - investivations of measuring tool capability - additional protocol templates

Item has been added to the configuration

ZAPHIRE offline evaluation, BasLic, PC

Recover

Item no.: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC

Item Number: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC for ZEISS microscopes - basic license for software in current version - PC-bound license - measurement data obtained from image data in CZI format Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click and Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

ZAPHIRE q-das out, BasLic, PC

Recover

Item no.: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC

Item Number: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

Microscope stands upright (12)

Special accessories

Item has been added to the configuration

Stand column man. basic with base plate Axio Imager Vario (D)

Recover

Item no.: 430025-9060-000

Stand column man. basic with base plate Axio Imager Vario (D)

Item Number: 430025-9060-000

Stand column man. basic with base plate Axio Imager Vario (D) Base plate 630x524 mm for stages up to 200x200 mm - height adjustment 250 mm - max. sample height 254 mm without stage - max. sample height 112 mm with stage for reflected-light application - max. sample height 88 mm with stage for transmitted-light application

Item has been added to the configuration

Stand column man. with base plate Axio Imager Vario (D)

Recover

Item no.: 430025-9050-000

Stand column man. with base plate Axio Imager Vario (D)

Item Number: 430025-9050-000

Stand column man. with base plate Axio Imager Vario (D) Base plate 700x574 mm for stages up to 300x300 mm - height adjustment 250 mm - max. sample height 254 mm without stage - max. sample height 112 mm with stage for reflected-light application - max. sample height 88 mm with stage for transmitted-light application

Item has been added to the configuration

Stand column mot. STEP with Base plate Axio Imager Vario (D)

Recover

Item no.: 430020-9050-000

Stand column mot. STEP with Base plate Axio Imager Vario (D)

Item Number: 430020-9050-000

Stand column mot. STEP with Base plate Axio Imager Vario (D) Base plate 700x574 mm for stages up to 300x300 mm - height adjustment 250 mm - max. sample height 254 mm without stage - max. sample height 112 mm with stage for reflected-light application - max. sample height 88 mm with stage for transmitted-light application

Research microscopes

Item has been added to the configuration

Microscope module Axio Imager.A2 Vario mot. with Control-Box

Recover

Item no.: 430025-9000-000

Microscope module Axio Imager.A2 Vario mot. with Control-Box

Item Number: 430025-9000-000

Microscope module Axio Imager.A2 Vario mot. with Control-Box - motorized objective focusing - stepsize resolution 25 nm - 5 mm focus lifting range - Light Control man. with USB and RS 232 interface - reflector turret cod. - mount for objective nosepiece cod. - coaxial transmitter MARC for Axio - reflected-light illumination man. with shutter and diffusion disk - stop slider man. with centerable luminous-field diaphragm - mount for stop slider man. with centerable aperture stop - control cable 2 m for Axio Imager Vario - 12V DC 100W power unit, stabilized, 100...127/200...240V AC autorange 50...60Hz/168VA - country-specific line cable and USB cable

Item has been added to the configuration

Microscope module Axio Imager.Z2 Vario mot. without objective focusing

Recover

Item no.: 430020-9010-000

Microscope module Axio Imager.Z2 Vario mot. without objective focusing

Item Number: 430020-9010-000

Microscope module Axio Imager.Z2 Vario mot. without objective focusing - mount for objective nosepiece mot. and reflector turret mot. - reflected-light illumination mot. with shutter and diffusion disk - mount for stop slider man. and mot.

Item has been added to the configuration

Microscope module Axio Imager.Z2 Vario mot. with control box

Recover

Item no.: 430020-9001-000

Microscope module Axio Imager.Z2 Vario mot. with control box

Item Number: 430020-9001-000

Microscope module Axio Imager.Z2 Vario mot. with control box - motorized objective focusing - stepsize resolution 10 nm - 5 mm focus range - Light Control mot. - main controller incl. USB-A, USB-C and TCP/IP interface - mount for objective nosepiece mot. and reflector turret mot. - reflected-light illumination mot. with shutter and diffusion disk - mount for stop slider man. and mot. - connection for focus linear sensor - 12V DC 100W power unit, stabilized, 100...127/200...240V AC autorange 50...60Hz/168VA - country-specific line cable and USB cable

Special accessories

Item has been added to the configuration

Installation kit for Auto Focus equipment on Sideport

Recover

Item no.: 425131-9030-000

Installation kit for Auto Focus equipment on Sideport

Item Number: 425131-9030-000

Installation kit for Auto Focus equipment on Sideport for Axio Imager.M2/M2m/Z2/Z2m and Vario.Z2 with tube lens and beam combiner 850nm UV/VIS

Item has been added to the configuration

Auto Focus equipment for Sideport 60N

Recover

Item no.: 425131-9000-000

Auto Focus equipment for Sideport 60N

Item Number: 425131-9000-000

Auto Focus equipment for Sideport 60N at Axio Imager.M2/M2m/Z2/Z2m, Axio Imager Vario.Z2 with motorized focus with - Auto Focus-unit, - Controller, - Connection cable, - IR Block filter for camera application

Item has been added to the configuration

Beam splitter 50% for camera deflection, 34x46x2.2 mm

Recover

Item no.: 425110-9120-000

Beam splitter 50% for camera deflection, 34x46x2.2 mm

Item Number: 425110-9120-000

Beam splitter 50% for camera deflection, 34x46x2.2 mm

Item has been added to the configuration

Path deflecting mirror 100% for camera deflection, 34x46x4 mm

Recover

Item no.: 425110-9110-000

Path deflecting mirror 100% for camera deflection, 34x46x4 mm

Item Number: 425110-9110-000

Path deflecting mirror 100% for camera deflection, 34x46x4 mm

Item has been added to the configuration

Camera path deflection on the left side, mot., interface 60N

Recover

Item no.: 425104-0000-000

Camera path deflection on the left side, mot., interface 60N

Item Number: 425104-0000-000

Camera path deflection on the left side, mot., interface 60N motorized slider with 2 switching positions, pos. 1 = 100% vis, pos. 2 for the optional mounting of path-deflecting mirror 100% = 100% doc or beam splitter 50% = 50% vis : 50% doc

Item has been added to the configuration

Camera path deflection on the left side, interface 60N

Recover

Item no.: 425103-0000-000

Camera path deflection on the left side, interface 60N

Item Number: 425103-0000-000

Camera path deflection on the left side, interface 60N slider with 2 switching positions, pos. 1 = 100% vis, pos. 2 for the optional mounting of path-deflecting mirror 100% = 100% doc or beam splitter 50% = 50% vis : 50% doc

Stand accessories (27)

Motorized nosepiece

Item has been added to the configuration

Nosepiece 7-position HD M27 mot. for Axio Imager.Z2 Vario

Recover

Item no.: 424514-9040-000

Nosepiece 7-position HD M27 mot. for Axio Imager.Z2 Vario

Item Number: 424514-9040-000

Nosepiece 7-position HD M27 mot. for Axio Imager.Z2 Vario with particle protection to ensure the clean room suitability of the microscope body according to ISO class 5

Item has been added to the configuration

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario

Recover

Item no.: 424514-9010-000

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario

Item Number: 424514-9010-000

6-position objective nosepiece HD DIC M27 mot. for Axio Imager Vario

Item has been added to the configuration

6-position objective nosepiece, HD DIC M27 mot. ACR

Recover

Item no.: 424507-0000-000

6-position objective nosepiece, HD DIC M27 mot. ACR

Item Number: 424507-0000-000

6-position objective nosepiece, HD DIC M27 mot. ACR with automatic objective recognition

Item has been added to the configuration

6-position objective nosepiece, HD DIC M27 mot.

Recover

Item no.: 424505-0000-000

6-position objective nosepiece, HD DIC M27 mot.

Item Number: 424505-0000-000

6-position objective nosepiece, HD DIC M27 mot.

Item has been added to the configuration

7-position objective nosepiece, HD M27 mot.

Recover

Item no.: 424502-0000-000

7-position objective nosepiece, HD M27 mot.

Item Number: 424502-0000-000

7-position objective nosepiece, HD M27 mot.

Motorized filter magazine

Item has been added to the configuration

Double filter wheel, discrete, mot., 2x4 positions

Recover

Item no.: 428301-9901-000

Double filter wheel, discrete, mot., 2x4 positions

Item Number: 428301-9901-000

Double filter wheel, discrete, mot., 2x4 positions each to accept neutral-density filter set and dia. 25 mm color filters. For use in transmitted-light and reflected-light equipments mot.

Motorized reflector turret

Item has been added to the configuration

6-position reflector turret mot. ACR Axio Imager Vario for P&C modules

Recover

Item no.: 424916-9010-000

6-position reflector turret mot. ACR Axio Imager Vario for P&C modules

Item Number: 424916-9010-000

6-position reflector turret mot. ACR Axio Imager Vario for P&C modules with automatic filter set and contrast module recognition

Item has been added to the configuration

6-position reflector turret mot. Axio Imager Vario for P&C modules

Recover

Item no.: 424916-9000-000

6-position reflector turret mot. Axio Imager Vario for P&C modules

Item Number: 424916-9000-000

6-position reflector turret mot. Axio Imager Vario for P&C modules

Various stand accessories

Item has been added to the configuration

Table-top base for MARC

Recover

Item no.: 435604-9010-000

Table-top base for MARC

Item Number: 435604-9010-000

Table-top base for MARC to accept Coaxial MARC, allows positioning on the desk as required; incl. cable CAN RJ45 1.0m

Item has been added to the configuration

Docking station with TFT display for Axio Examiner/Axio Imager Vario

Recover

Item no.: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario

Item Number: 432926-9001-000

Docking station with TFT display for Axio Examiner/Axio Imager Vario Control module with TFT display, coaxial coarse/fine focusing knobs and freely programmable buttons for the control of motorized Axio Examiner and Axio Imager.Z2 Vario components. Positioning on the desk as required. 30°-45° tilt adjustment of the TFT display

Item has been added to the configuration

Coaxial transmitter MARC for Axio

Recover

Item no.: 432906-0000-000

Coaxial transmitter MARC for Axio

Item Number: 432906-0000-000

Coaxial transmitter MARC for Axio coaxial coarse-/fine focusing controls and 5 keys; incl. connection cable 3 m to Control-Box

Item has been added to the configuration

Controler cable 6 m for Axio Imager Vario

Recover

Item no.: 432610-9090-000

Controler cable 6 m for Axio Imager Vario

Item Number: 432610-9090-000

Controler cable 6 m for Axio Imager Vario to the connection of the control-box with microscope module

Item has been added to the configuration

Controler cable 2 m for Axio Imager Vario

Recover

Item no.: 432610-9080-000

Controler cable 2 m for Axio Imager Vario

Item Number: 432610-9080-000

Controler cable 2 m for Axio Imager Vario to the connection of the control-box with microscope module

Item has been added to the configuration

External Control-Box for Axio Imager.Z2 Vario

Recover

Item no.: 432610-9071-000

External Control-Box for Axio Imager.Z2 Vario

Item Number: 432610-9071-000

External Control-Box for Axio Imager.Z2 Vario with 12V DC 100W power unit, stabilized, 100...127/200...240V AC autorange 50...60Hz/168VA, country-specific line cable and USB cable

Item has been added to the configuration

Breath and sneeze guard made of plexiglas 380x180 f. Axio Imager Vario

Recover

Item no.: 430025-9100-000

Breath and sneeze guard made of plexiglas 380x180 f. Axio Imager Vario

Item Number: 430025-9100-000

Breath and sneeze guard made of plexiglas 380x180 f. Axio Imager Vario to protect the sample from particles from the exhaled breath

Item has been added to the configuration

6-position objective nosepiece, Pol M27 mot. for Axio Imager Vario

Recover

Item no.: 424514-9000-000

6-position objective nosepiece, Pol M27 mot. for Axio Imager Vario

Item Number: 424514-9000-000

6-position objective nosepiece, Pol M27 mot. for Axio Imager Vario 5 centerable HD M27 positions and 1 fixed HD DIC M27 position

Stage carrier

Item has been added to the configuration

Universal transm./refl.-light stage carrier for Axio Imager Vario

Recover

Item no.: 430709-9000-000

Universal transm./refl.-light stage carrier for Axio Imager Vario

Item Number: 430709-9000-000

Universal transm./refl.-light stage carrier for Axio Imager Vario for - Scanning stages 130x85; PIEZO - Scanning stages 225x85; PIEZO - Mechanical stages 75x50 mot; CAN - Mechanical stages 75x50 mot standard; CAN - Scanning stages 130x85 with DC drive - Scanning stages 130x85 STEP - Mechanical stages 105x105 (85) RL(TL) - Mechanical stages 105x105 (85) RL(TL) SCD

Manual filter magazine

Item has been added to the configuration

Double filter wheel, discrete, man. with neutral-density filter set d=25

Recover

Item no.: 428319-9000-000

Double filter wheel, discrete, man. with neutral-density filter set d=25

Item Number: 428319-9000-000

Double filter wheel, discrete, man. with neutral-density filter set d=25 with 2x4 postions, attenuation up to 0,0028 % possible. For use in transmitted-light and reflected-light equipments mot. and man. Not usable for HBO/XBO

Item has been added to the configuration

Double filter wheel, discrete, man., 2x4 positions

Recover

Item no.: 428300-9901-000

Double filter wheel, discrete, man., 2x4 positions

Item Number: 428300-9901-000

Double filter wheel, discrete, man., 2x4 positions each to accept neutral-density filter set and dia. 25 mm color filters. For use in transmitted-light and reflected-light equipment mot. and man.

Filter mounts

Item has been added to the configuration

Color filter carrier 3x for filter d=32 mm

Recover

Item no.: 428305-0000-000

Color filter carrier 3x for filter d=32 mm

Item Number: 428305-0000-000

Color filter carrier 3x for filter d=32 mm

Filter slider

Item has been added to the configuration

Filter module ms GFP/mRFP Duolink

Recover

Item no.: 426143-9140-000

Filter module ms GFP/mRFP Duolink

Item Number: 426143-9140-000

Filter module ms GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE ms GFP+mRFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 470/27 for GFP EX BP 556/25 for mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module wl GFP/mRFP Duolink

Recover

Item no.: 426143-9130-000

Filter module wl GFP/mRFP Duolink

Item Number: 426143-9130-000

Filter module wl GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE wl GFP+mRFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 470/27+556/25 for GFP and mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module ms CFP/YFP Duolink

Recover

Item no.: 426143-9120-000

Filter module ms CFP/YFP Duolink

Item Number: 426143-9120-000

Filter module ms CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE ms CFP+YFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 445/25 for CFP EX BP 510/15 for YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter module wl CFP/YFP Duolink

Recover

Item no.: 426143-9110-000

Filter module wl CFP/YFP Duolink

Item Number: 426143-9110-000

Filter module wl CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE wl CFP+YFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 445/25+510/15 for CFP and YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter module 2-position Duolink

Recover

Item no.: 426143-9100-000

Filter module 2-position Duolink

Item Number: 426143-9100-000

Filter module 2-position Duolink with two slots for standard filter sets. - 2x for beam splitter 26 mm x 36 mm, max. thickness 1 mm - 4x for filters d=25 mm, max. thickness 5 mm

Coded nosepiece

Item has been added to the configuration

6-position objective nosepiece HD DIC M27 cod. for Axio Imager Vario

Recover

Item no.: 424514-9030-000

6-position objective nosepiece HD DIC M27 cod. for Axio Imager Vario

Item Number: 424514-9030-000

6-position objective nosepiece HD DIC M27 cod. for Axio Imager Vario

Item has been added to the configuration

6-position objective nosepiece, Pol M27 cod. for Axio Imager Vario

Recover

Item no.: 424514-9020-000

6-position objective nosepiece, Pol M27 cod. for Axio Imager Vario

Item Number: 424514-9020-000

6-position objective nosepiece, Pol M27 cod. for Axio Imager Vario 5 centerable HD M27 positions and 1 fixed HD DIC M27 position

Transmitted-light illumination (2)

Transmitted-light illumination

Item has been added to the configuration

Transmitted-light module with condenser carrier f. Axio Imager Vario

Recover

Item no.: 423906-9000-000

Transmitted-light module with condenser carrier f. Axio Imager Vario

Item Number: 423906-9000-000

Transmitted-light module with condenser carrier f. Axio Imager Vario including luminous-field diaphragm, with openings for filter wheels man.

Item has been added to the configuration

Attachment lamp VIS-LED with collector

Recover

Item no.: 423053-9030-000

Attachment lamp VIS-LED with collector

Item Number: 423053-9030-000

Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras

Reflected-light illumination (18)

Aperture diaphragm slider

Item has been added to the configuration

Stop slider mot. with 8-position aperture stop turret, d=0.8-6.4 mm

Recover

Item no.: 423618-9000-000

Stop slider mot. with 8-position aperture stop turret, d=0.8-6.4 mm

Item Number: 423618-9000-000

Stop slider mot. with 8-position aperture stop turret, d=0.8-6.4 mm

Item has been added to the configuration

Slider man. with variable rectangular diaphragm

Recover

Item no.: 423615-0000-000

Slider man. with variable rectangular diaphragm

Item Number: 423615-0000-000

Slider man. with variable rectangular diaphragm Operation via lever adjustment, max. opening = 28 x 28 mm, min. opening = 0.3 x 0.3 mm

Item has been added to the configuration

Stop slider mot. with centerable aperture stop

Recover

Item no.: 423614-9901-000

Stop slider mot. with centerable aperture stop

Item Number: 423614-9901-000

Stop slider mot. with centerable aperture stop

Item has been added to the configuration

Stop slider with centerable aperture stop

Recover

Item no.: 423613-0000-000

Stop slider with centerable aperture stop

Item Number: 423613-0000-000

Stop slider with centerable aperture stop

Item has been added to the configuration

Stop slider mot. with centerable luminous-field diaphragm

Recover

Item no.: 423612-9901-000

Stop slider mot. with centerable luminous-field diaphragm

Item Number: 423612-9901-000

Stop slider mot. with centerable luminous-field diaphragm

Item has been added to the configuration

Stop slider man. with centerable luminous-field diaphragm

Recover

Item no.: 423611-0000-000

Stop slider man. with centerable luminous-field diaphragm

Item Number: 423611-0000-000

Stop slider man. with centerable luminous-field diaphragm slider stop position can be set

Reflector modules

Item has been added to the configuration

Reflector module with analyzer ACR P&C for reflected light

Recover

Item no.: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item Number: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item has been added to the configuration

Reflector module DIC/Pol ACR P&C shift free for reflected light

Recover

Item no.: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light

Item Number: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other

Item has been added to the configuration

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Recover

Item no.: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Item Number: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light suitable for color DIC and polarization in reflected light, consisting of two Pol filters with lambda plate that are firmly oriented towards each other

Item has been added to the configuration

Reflector module calibration Apotome universal ACR P&C

Recover

Item no.: 424930-9903-000

Reflector module calibration Apotome universal ACR P&C

Item Number: 424930-9903-000

Reflector module calibration Apotome universal ACR P<(>&<)>C

Item has been added to the configuration

Reflector module C-DIC/TIC ACR P&C for reflected light

Recover

Item no.: 424929-9903-000

Reflector module C-DIC/TIC ACR P&C for reflected light

Item Number: 424929-9903-000

Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC prisms in modulator turret, not suitable for polarization

Item has been added to the configuration

Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item has been added to the configuration

Reflector module Pol ACR P&C for HBO 100 for reflected light

Recover

Item no.: 424924-9901-000

Reflector module Pol ACR P&C for HBO 100 for reflected light

Item Number: 424924-9901-000

Reflector module Pol ACR P&C for HBO 100 for reflected light Suitable for the detection of immunogold staining and the magneto-optical Kerr effect

Item has been added to the configuration

Reflector module polarizer ACR P&C for reflected light

Recover

Item no.: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item Number: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item has been added to the configuration

Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Fluorescence protection devices

Item has been added to the configuration

Antiglare screen

Recover

Item no.: 452163-0000-000

Antiglare screen

Item Number: 452163-0000-000

Antiglare screen

Reflector slider for Axioskop 1

Item has been added to the configuration

Beam splitter 50%, 26x36mm

Recover

Item no.: 446310-0002-000

Beam splitter 50%, 26x36mm

Item Number: 446310-0002-000

Beam splitter 50%, 26x36mm

Fluorescence shutter

Item has been added to the configuration

Shutter high speed, reflected-light for Axio Imager M and Z

Recover

Item no.: 423622-9901-000

Shutter high speed, reflected-light for Axio Imager M and Z

Item Number: 423622-9901-000

Shutter high speed, reflected-light for Axio Imager M and Z switching time < 20 ms switching frequency max. 5 Hz firmware version 06.008 or higher required

Lamps and Lamp housings (25)

LED lamps

Item has been added to the configuration

Illuminator microLED 3

Recover

Item no.: 423053-9074-000

Illuminator microLED 3

Item Number: 423053-9074-000

Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Recover

Item no.: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Item Number: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Recover

Item no.: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Item Number: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (511nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Recover

Item no.: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Item Number: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RYB-UV

Recover

Item no.: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV

Item Number: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RGB-UV

Recover

Item no.: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV

Item Number: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 5, Type RGB-UV

Recover

Item no.: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV

Item Number: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Illumination system Colibri.2

Recover

Item no.: 423052-9502-000

Illumination system Colibri.2

Item Number: 423052-9502-000

Illumination system Colibri.2 continuously variable, quickly switchable and stable on the long term fluorescence light source incl. control box and control panel for use with up to 4 high brightness LED modules changeable by customer. 3 holder for beam combiner, storage case for Colibri LED modules, storage case for 6 reflector modules P&C, country-specific power cable, CAN-Bus cable and USB extension cable are included in delivery.

Switching mirrors

Item has been added to the configuration

Switching mirror for 2 illuminators

Recover

Item no.: 447230-9903-000

Switching mirror for 2 illuminators

Item Number: 447230-9903-000

Switching mirror for 2 illuminators

Item has been added to the configuration

Switching mirror mot.; CAN

Recover

Item no.: 447229-0000-000

Switching mirror mot.; CAN

Item Number: 447229-0000-000

Switching mirror mot.; CAN for Axio Observer 5 / 7 / D1 / Z1 and Axio Imager M2 / Z2 and Z2 Vario

Adjusting aids

Item has been added to the configuration

Adjusting aid for HBO lamps for Axio Imager

Recover

Item no.: 423631-9901-000

Adjusting aid for HBO lamps for Axio Imager

Item Number: 423631-9901-000

Adjusting aid for HBO lamps for Axio Imager

Various lamp accessories

Item has been added to the configuration

Sheathing for Light Guide HXP for Stabilization

Recover

Item no.: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization

Item Number: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization Stabilization of position of the light guide in operation. Avoidance of variation in illumination uniformity due to unwanted movement of the light guide.

Item has been added to the configuration

LED Trigger Box for Colibri 5/7

Recover

Item no.: 423052-9760-000

LED Trigger Box for Colibri 5/7

Item Number: 423052-9760-000

LED Trigger Box for Colibri 5/7 for signal distribution

Item has been added to the configuration

Control Panel for Colibri 5/7

Recover

Item no.: 423052-9751-000

Control Panel for Colibri 5/7

Item Number: 423052-9751-000

Control Panel for Colibri 5/7 with LCD to display the operating state. For LED selection and brightness setting.

Item has been added to the configuration

Face protection shield

Recover

Item no.: 417009-0000-000

Face protection shield

Item Number: 417009-0000-000

Face protection shield Face protection shield

Item has been added to the configuration

Protective gloves

Recover

Item no.: 417008-0000-000

Protective gloves

Item Number: 417008-0000-000

Protective gloves Protective gloves

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Item has been added to the configuration

Shutter remote control for HXP C

Recover

Item no.: 000000-0496-214

Shutter remote control for HXP C

Item Number: 000000-0496-214

Shutter remote control for HXP C incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Adapters

Item has been added to the configuration

Illumination adapter for light guide (D)

Recover

Item no.: 423302-0000-000

Illumination adapter for light guide (D)

Item Number: 423302-0000-000

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

Item has been added to the configuration

Extension tube for illuminator mount, l=17.0 mm

Recover

Item no.: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

Item Number: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

Cold-light sources

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

HBO/XBO lamp housing

Item has been added to the configuration

HBO 100 illuminator, self-adjusting with lamp mount and collector

Recover

Item no.: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector

Item Number: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector including heat-reflecting filter and 2m connection cable. Automatic lamp alignment

Item has been added to the configuration

HBO 100 illuminator with lamp mount and collector

Recover

Item no.: 423010-0000-000

HBO 100 illuminator with lamp mount and collector

Item Number: 423010-0000-000

HBO 100 illuminator with lamp mount and collector incl. heat-reflecting filter and 2m connection cable

Low-voltage and halogen lamp housings

Item has been added to the configuration

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Light guides

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (4)

LED modules for LED illuminators

Item has been added to the configuration

LED module 505 nm for Colibri

Recover

Item no.: 423052-9061-000

LED module 505 nm for Colibri

Item Number: 423052-9061-000

LED module 505 nm for Colibri

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 103 W/2 (F)

Recover

Item no.: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item Number: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Halogen lamps

Item has been added to the configuration

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (4)

Various electrical accessories

Item has been added to the configuration

4-position CAN hub for microscope stands with CAN interface

Recover

Item no.: 432927-9050-000

4-position CAN hub for microscope stands with CAN interface

Item Number: 432927-9050-000

4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario

Ballasts

Item has been added to the configuration

Control panel with LCD display for FluoArc

Recover

Item no.: 432905-0000-000

Control panel with LCD display for FluoArc

Item Number: 432905-0000-000

Control panel with LCD display for FluoArc

Item has been added to the configuration

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Recover

Item no.: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Item Number: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA with resettable hour meter at the front

Power units

Item has been added to the configuration

Power Supply, external for HAL 100 and LED lamps, CAN connect

Recover

Item no.: 432610-9040-000

Power Supply, external for HAL 100 and LED lamps, CAN connect

Item Number: 432610-9040-000

Power Supply, external for HAL 100 and LED lamps, CAN connect stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Control via CAN-BUS/stand and/or via software. With country-specific line cable.

Polarization (39)

DIC slider 20x for reflected light

Item has been added to the configuration

DIC slider C EP-Apo 20x/0.7 Epi

Recover

Item no.: 426968-9140-000

DIC slider C EP-Apo 20x/0.7 Epi

Item Number: 426968-9140-000

DIC slider C EP-Apo 20x/0.7 Epi

Item has been added to the configuration

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Recover

Item no.: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item Number: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item has been added to the configuration

DIC slider EC EP 5x/0.13, 10x/0.2, 20x/0.4 Epi+

Recover

Item no.: 426968-9020-000

DIC slider EC EP 5x/0.13, 10x/0.2, 20x/0.4 Epi+

Item Number: 426968-9020-000

DIC slider EC EP 5x/0.13, 10x/0.2, 20x/0.4 Epi+

Item has been added to the configuration

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Recover

Item no.: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Item Number: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

DIC slider 100x for reflected light

Item has been added to the configuration

DIC slider EC EP 100x/0.8 Epi+

Recover

Item no.: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item Number: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item has been added to the configuration

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Recover

Item no.: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Item Number: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Various DIC accessories

Item has been added to the configuration

Compensator mount 6x20 with DF stop

Recover

Item no.: 424706-0000-000

Compensator mount 6x20 with DF stop

Item Number: 424706-0000-000

Compensator mount 6x20 with DF stop

Item has been added to the configuration

4-position modulator turret mot. for circular DIC/TIC

Recover

Item no.: 424704-9902-000

4-position modulator turret mot. for circular DIC/TIC

Item Number: 424704-9902-000

4-position modulator turret mot. for circular DIC/TIC 3 positions for DIC/TIC prisms, 1 position for brightfield/darkfield

Item has been added to the configuration

4-position modulator turret for circular DIC/TIC

Recover

Item no.: 424703-0000-000

4-position modulator turret for circular DIC/TIC

Item Number: 424703-0000-000

4-position modulator turret for circular DIC/TIC 3 positions for DIC/TIC prisms, 1 position for bright field/dark field

Compensators

Item has been added to the configuration

Compensator Lambda/4, 6x20

Recover

Item no.: 473714-0000-000

Compensator Lambda/4, 6x20

Item Number: 473714-0000-000

Compensator Lambda/4, 6x20

Item has been added to the configuration

Compensator Lambda, 6x20

Recover

Item no.: 473704-0000-000

Compensator Lambda, 6x20

Item Number: 473704-0000-000

Compensator Lambda, 6x20

Item has been added to the configuration

Compensator Lambda, rotary, +/-8° 6x20

Recover

Item no.: 453710-0000-000

Compensator Lambda, rotary, +/-8° 6x20

Item Number: 453710-0000-000

Compensator Lambda, rotary, +/-8° 6x20 usable only for transmitted light

Item has been added to the configuration

Wedge compensator 0-4 Lambda, 6x20 (D)

Recover

Item no.: 000000-1140-663

Wedge compensator 0-4 Lambda, 6x20 (D)

Item Number: 000000-1140-663

Wedge compensator 0-4 Lambda, 6x20 (D)

Item has been added to the configuration

Tilting compensator B 0-5 Lambda, 6x20 (D)

Recover

Item no.: 000000-1115-700

Tilting compensator B 0-5 Lambda, 6x20 (D)

Item Number: 000000-1115-700

Tilting compensator B 0-5 Lambda, 6x20 (D)

Item has been added to the configuration

Tilting compensator K 0-30 Lambda, 6x20 (D)

Recover

Item no.: 000000-1115-698

Tilting compensator K 0-30 Lambda, 6x20 (D)

Item Number: 000000-1115-698

Tilting compensator K 0-30 Lambda, 6x20 (D)

Analyzers

Item has been added to the configuration

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Recover

Item no.: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Item Number: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10° position 1 with analyzer and Lambda plate each rotatable by +/- 10°, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer slider fixed for transmitted light, 6x20

Recover

Item no.: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item Number: 433605-0000-000

Analyzer slider fixed for transmitted light, 6x20

Item has been added to the configuration

Analyzer slider D/A with lambda-plate rotatable 360°

Recover

Item no.: 428102-0000-000

Analyzer slider D/A with lambda-plate rotatable 360°

Item Number: 428102-0000-000

Analyzer slider D/A with lambda-plate rotatable 360° position 1 with analyzer fixed and lambda plate 360° rotatable, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item has been added to the configuration

Analyzer module DIC ACR P&C shift free for transmitted light

Recover

Item no.: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light

Item Number: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.

Item has been added to the configuration

Analyzer module DIC ACR P&C for transmitted light

Recover

Item no.: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light

Item Number: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light optimized for DIC in transmitted light, not suitable for polarization

Various PO accessories

Item has been added to the configuration

Quartz depolarizer d=32 mm

Recover

Item no.: 453653-0000-000

Quartz depolarizer d=32 mm

Item Number: 453653-0000-000

Quartz depolarizer d=32 mm

Item has been added to the configuration

Quartz depolarizer with tube-lens for tubes Axio Imager

Recover

Item no.: 428106-9030-000

Quartz depolarizer with tube-lens for tubes Axio Imager

Item Number: 428106-9030-000

Quartz depolarizer with tube-lens for tubes Axio Imager

Item has been added to the configuration

Depolarization slider D/A

Recover

Item no.: 428105-0000-000

Depolarization slider D/A

Item Number: 428105-0000-000

Depolarization slider D/A position 1 with quartz depolarizer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer slider D/A, 360° rotatable

Recover

Item no.: 428103-0000-000

Analyzer slider D/A, 360° rotatable

Item Number: 428103-0000-000

Analyzer slider D/A, 360° rotatable position 1 with analyzer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer slider D/A, fixed

Recover

Item no.: 428101-0000-000

Analyzer slider D/A, fixed

Item Number: 428101-0000-000

Analyzer slider D/A, fixed position 1 with analyzer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Polarizers D

Item has been added to the configuration

Polarizer D for condensers 0,8 and 0,9

Recover

Item no.: 427710-9050-000

Polarizer D for condensers 0,8 and 0,9

Item Number: 427710-9050-000

Polarizer D for condensers 0,8 and 0,9 for use into a DIC position

Polarizers A

Item has been added to the configuration

Polarizer slider for reflected light, 360° rotatable for Axio Imager

Recover

Item no.: 427704-9901-000

Polarizer slider for reflected light, 360° rotatable for Axio Imager

Item Number: 427704-9901-000

Polarizer slider for reflected light, 360° rotatable for Axio Imager

DIC slider 50x for reflected light

Item has been added to the configuration

DIC slider C EP-Apo 50x/0.95 Epi

Recover

Item no.: 426968-9150-000

DIC slider C EP-Apo 50x/0.95 Epi

Item Number: 426968-9150-000

DIC slider C EP-Apo 50x/0.95 Epi

Item has been added to the configuration

DIC slider EC EP 40x/0.6 Epi+

Recover

Item no.: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item Number: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item has been added to the configuration

DIC slider EC EP 50x/0.7 Epi+

Recover

Item no.: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item Number: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item has been added to the configuration

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Recover

Item no.: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item Number: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item has been added to the configuration

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Recover

Item no.: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Item Number: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

DIC slider 10x for reflected light

Item has been added to the configuration

DIC slider C EP-Apo 10x/0.4 Epi

Recover

Item no.: 426968-9130-000

DIC slider C EP-Apo 10x/0.4 Epi

Item Number: 426968-9130-000

DIC slider C EP-Apo 10x/0.4 Epi

DIC slider type II

Item has been added to the configuration

DIC slider LD PN 20x/0.40 II

Recover

Item no.: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item Number: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item has been added to the configuration

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Recover

Item no.: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item Number: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

C-DIC/TIC sliders and prisms

Item has been added to the configuration

C-DIC prism for modulator turret

Recover

Item no.: 426922-0000-000

C-DIC prism for modulator turret

Item Number: 426922-0000-000

C-DIC prism for modulator turret for EC EPN 50x-100x/LD EC EPN 100x and EC EPA 50x-100x

Item has been added to the configuration

C-DIC prism for modulator turret

Recover

Item no.: 426921-0000-000

C-DIC prism for modulator turret

Item Number: 426921-0000-000

C-DIC prism for modulator turret for EC EP 5x-100x/EC EPN 5x-20x/ LD EC EPN 20x-50x and EC EPA 10x-20x

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Recover

Item no.: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Item Number: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism

Stages and accessories (13)

Scanning stages

Item has been added to the configuration

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario

Recover

Item no.: 432036-9020-000

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario

Item Number: 432036-9020-000

Scanning Stage 200x200 STEP with stage carrier Axio Imager Vario - stepper motor with 4 mm spindle pitch - connection to stepper controller - travel range 200 mm x 200 mm - flat surface 325 mm x 410 mm - max load: 3 kg - max speed 45 mm/s - resolution: 0.2 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - for stage inserts 246 x 246 mm

Item has been added to the configuration

Scanning Stage 300x300 STEP with stage carrier Axio Imager Vario

Recover

Item no.: 432036-9010-000

Scanning Stage 300x300 STEP with stage carrier Axio Imager Vario

Item Number: 432036-9010-000

Scanning Stage 300x300 STEP with stage carrier Axio Imager Vario - stepper motor with 4 mm spindle pitch - connection to stepper controller - travel range 300 mm x 300 mm (200 mm x 200 mm at transmitted-light applications) - flat surface 442 mm x 442 mm - max load: 5 kg - max speed 45 mm/s - resolution: 0.2 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - for stage inserts 246 x 246 mm

Specimen holders

Item has been added to the configuration

Vacuum wafer holder rotating, for 8" and 12" wafer (D)

Recover

Item no.: 432636-9020-000

Vacuum wafer holder rotating, for 8" and 12" wafer (D)

Item Number: 432636-9020-000

Vacuum wafer holder rotating, for 8" and 12" wafer (D) for mechanical stages and Scanning stages 300x300

Item has been added to the configuration

Wafer holder rotating, for 6" and 8" wafer (D)

Recover

Item no.: 432636-9010-000

Wafer holder rotating, for 6" and 8" wafer (D)

Item Number: 432636-9010-000

Wafer holder rotating, for 6" and 8" wafer (D) for mechanical stages and Scanning stages 200x200 and 300x300

Item has been added to the configuration

Wafer holder rotating, for 8" and 12" wafer (D)

Recover

Item no.: 432636-9000-000

Wafer holder rotating, for 8" and 12" wafer (D)

Item Number: 432636-9000-000

Wafer holder rotating, for 8" and 12" wafer (D) for mechanical stages and Scanning stages 300x300

Item has been added to the configuration

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Recover

Item no.: 432335-9160-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Item Number: 432335-9160-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D) and mechanical stage 75x50 mot

Item has been added to the configuration

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Recover

Item no.: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Item Number: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage

Item has been added to the configuration

Mounting Frame with Mask holder for 6"x6", frame size 246x246 mm (D)

Recover

Item no.: 432324-9020-000

Mounting Frame with Mask holder for 6"x6", frame size 246x246 mm (D)

Item Number: 432324-9020-000

Mounting Frame with Mask holder for 6"x6", frame size 246x246 mm (D) for mechanical stage 200x200 and Scanning stages 200x200 and 300x300

Item has been added to the configuration

Glass Insert Plate, frame size 246x246 mm (D)

Recover

Item no.: 432324-9010-000

Glass Insert Plate, frame size 246x246 mm (D)

Item Number: 432324-9010-000

Glass Insert Plate, frame size 246x246 mm (D) for mechanical stage 200x200 and Scanning stages 200x200 and 300x300

Item has been added to the configuration

Metal Insert Plate, frame size 246x246 mm (D)

Recover

Item no.: 432324-9000-000

Metal Insert Plate, frame size 246x246 mm (D)

Item Number: 432324-9000-000

Metal Insert Plate, frame size 246x246 mm (D) for mechanical stage 200x200 and Scanning stages 200x200 and 300x300

Various stage accessories

Item has been added to the configuration

Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Mechanical stages

Item has been added to the configuration

Mechanical stage A/D 200x200 R with stage carrier Axio Imager Vario

Recover

Item no.: 432036-9040-000

Mechanical stage A/D 200x200 R with stage carrier Axio Imager Vario

Item Number: 432036-9040-000

Mechanical stage A/D 200x200 R with stage carrier Axio Imager Vario - manual 3-plate mechanical stage for reflected light and transmitted light - 438x346 mm stage plate - for 246x246 mm insert plates and wafer holder up to 8" - coaxial drive and fast adjustment function

Item has been added to the configuration

Mechanical stage A 300x300 R with stage carrier Axio Imager Vario

Recover

Item no.: 432036-9030-000

Mechanical stage A 300x300 R with stage carrier Axio Imager Vario

Item Number: 432036-9030-000

Mechanical stage A 300x300 R with stage carrier Axio Imager Vario - manual 3-plate mechanical stage for reflected light - 520x400 mm stage plate - for wafer holder up to 12" - coaxial drive and fast adjustment function

Tubes and accessories (5)

Binocular phototubes

Item has been added to the configuration

Binocular phototube 15°/25 (100:0/0:100), upright image

Recover

Item no.: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image

Item Number: 425503-9901-000

Binocular phototube 15°/25 (100:0/0:100), upright image adjustable stop, camera port with interface 60N

Binocular ergotubes

Item has been added to the configuration

Comfortable binocular Ergotube 8-33°/23, 50mm high, reversed image

Recover

Item no.: 425518-9010-000

Comfortable binocular Ergotube 8-33°/23, 50mm high, reversed image

Item Number: 425518-9010-000

Comfortable binocular Ergotube 8-33°/23, 50mm high, reversed image for Axio Imager variable, continuous angle adjustment 8-33° and vertical adjustment 50 mm

Various tube accessories

Item has been added to the configuration

Tube module 60N, 100% to the camera, reversed image

Recover

Item no.: 425518-9000-000

Tube module 60N, 100% to the camera, reversed image

Item Number: 425518-9000-000

Tube module 60N, 100% to the camera, reversed image

Binocular ergo photoubes

Item has been added to the configuration

Comfortable binocular Ergophototube 15°/23 (50:50), upright image

Recover

Item no.: 425515-0000-000

Comfortable binocular Ergophototube 15°/23 (50:50), upright image

Item Number: 425515-0000-000

Comfortable binocular Ergophototube 15°/23 (50:50), upright image variable, continuous horizontal and vertical adjustment of the binocular component, camera port with interface 60N

Item has been added to the configuration

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image

Recover

Item no.: 425514-0000-000

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image

Item Number: 425514-0000-000

Binocular Ergophototube 20°/23 MAT (100:0/0:100), upright image variable, continuous vertical adjustment 44 mm, camera port with interface 60N

Optovar systems (6)

Magnification changer

Item has been added to the configuration

5-position tube-lens turret, cod., with Bertrand system

Recover

Item no.: 425309-9901-000

5-position tube-lens turret, cod., with Bertrand system

Item Number: 425309-9901-000

5-position tube-lens turret, cod., with Bertrand system tube lens 1x and Bertrand system already integrated, 3 empty positions for optionally usable tube lenses. Magnification factors can be read out. Software support by AxioVision as from Version 4.5 and ZEN 2011 (blue edition).

Item has been added to the configuration

5-position tube-lens turret, mot., with Bertrand system

Recover

Item no.: 425302-9901-000

5-position tube-lens turret, mot., with Bertrand system

Item Number: 425302-9901-000

5-position tube-lens turret, mot., with Bertrand system motorized switching, tube lens 1x and Bertrand system already integrated, 3 empty positions for optionally usable tube lenses

Optovar modules

Item has been added to the configuration

Tube-lens 4.0x for Axio Imager/Axiosope

Recover

Item no.: 425307-0000-000

Tube-lens 4.0x for Axio Imager/Axiosope

Item Number: 425307-0000-000

Tube-lens 4.0x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 2.5x for Axio Imager/Axioscope

Recover

Item no.: 425305-0000-000

Tube-lens 2.5x for Axio Imager/Axioscope

Item Number: 425305-0000-000

Tube-lens 2.5x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 1.6x for Axio Imager/Axioscope

Recover

Item no.: 425304-0000-000

Tube-lens 1.6x for Axio Imager/Axioscope

Item Number: 425304-0000-000

Tube-lens 1.6x for Axio Imager/Axioscope for insertion in the tube-lens turret

Item has been added to the configuration

Tube-lens 1.25x for Axio Imager/Axioscope

Recover

Item no.: 425303-0000-000

Tube-lens 1.25x for Axio Imager/Axioscope

Item Number: 425303-0000-000

Tube-lens 1.25x for Axio Imager/Axioscope for insertion in the tube-lens turret

Filters (44)

Conversion filter

Item has been added to the configuration

Conversion filter 3200-5500K; d=25x2

Recover

Item no.: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item Number: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item has been added to the configuration

Conversion filter 5700-3200 K, d=25 mm

Recover

Item no.: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm

Item Number: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

White-balance filter, d=32x1.5 mm

Recover

Item no.: 000000-1155-789

White-balance filter, d=32x1.5 mm

Item Number: 000000-1155-789

White-balance filter, d=32x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Fluorescence filter set

Item has been added to the configuration

Neutral-density filter set for reflected light, d=25

Recover

Item no.: 487935-9020-000

Neutral-density filter set for reflected light, d=25

Item Number: 487935-9020-000

Neutral-density filter set for reflected light, d=25 consisting of 7 neutral-density filters with 2x 50%, 25%, 3x 12% and 3% transmission, for integration in filter wheels, discrete, man. or mot., for the use at strongly reflective samples with HAL 100 illuminator, also suitable for HBO/XBO

Item has been added to the configuration

Filter set transm. light with neutral-density and color filters, d=25

Recover

Item no.: 487935-9010-000

Filter set transm. light with neutral-density and color filters, d=25

Item Number: 487935-9010-000

Filter set transm. light with neutral-density and color filters, d=25 consisting of 4 neutral-density filters with 1x 25%, 2x 6% and 1x 1.5% transmission, as well as 1x green filter and 1x conversion filter 3200-5500K. For integration in filter wheels, discrete, man. or mot. Not usable for HBO/XBO

Item has been added to the configuration

Neutral-density filter set D/A, d=25

Recover

Item no.: 487931-9901-000

Neutral-density filter set D/A, d=25

Item Number: 487931-9901-000

Neutral-density filter set D/A, d=25 attenuation up to 0.0028 % possible. For integration in filter wheels, discrete, man. or mot. Not usable for HBO/XBO

Fluorescence filter set pix

Item has been added to the configuration

Filter Set 117 FRET GFP/mCherry for filter wheels

Recover

Item no.: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels

Item Number: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels for use with excitation and emission filter wheel Consisting of: EX BP 469/38 (GFP/FRET) EX BP 555/30 (mCherry) BS 495 (GFP) BS 583 (mCherry) EM BP 525/50 (GFP) EM BP 640/86 (mCherry/FRET)

Item has been added to the configuration

Filter Set 115 Cy7

Recover

Item no.: 489115-9100-000

Filter Set 115 Cy7

Item Number: 489115-9100-000

Filter Set 115 Cy7 Consisting of: EX BP 710/87 BS 760 EM BP 814/91

Item has been added to the configuration

Filter Set 114 FRET CFP/YFP for filter wheels

Recover

Item no.: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels

Item Number: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels for use with excitation and emission filter wheel Consisting of: EX BP 423/44 (CFP/FRET) EX BP 508/20 (YFP) BS 463 (CFP/FRET) BS 525 (YFP) EM BP 485/35 (CFP) EM BP 555/46 (FRET)

Item has been added to the configuration

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM MBP 425/30 + 514/30 + 592/25 + 681/45 + 785/38

Item has been added to the configuration

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM MBP 425/30 + 524/51 + 634/38 + 785/38

Item has been added to the configuration

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter Set 110 HE LED (E)

Recover

Item no.: 489110-9111-000

Filter Set 110 HE LED (E)

Item Number: 489110-9111-000

Filter Set 110 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, FITC, mCherry and Cy7 with excitation wavelengths 385, 475, 590 and 735 nm. Contains beam splitter QBS 405 + 493 + 611 + 762 and emission filter QBP 425/30 + 524/51 + 634/38 + 785/38.

Item has been added to the configuration

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter set 109 HE LED (E)

Recover

Item no.: 489109-9110-000

Filter set 109 HE LED (E)

Item Number: 489109-9110-000

Filter set 109 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC and TRITC/Cy3 with excitation wavelengths 385, 475 and 555 nm. Contains beam splitter TBS 405 + 493 + 575 and emission filter TBP 425/29 + 514/31 + 632/100.

Item has been added to the configuration

Filter set 108 HE LED (E)

Recover

Item no.: 489108-9110-000

Filter set 108 HE LED (E)

Item Number: 489108-9110-000

Filter set 108 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like CFP and YFP with excitation wavelengths 425 and 510 nm. Contains beam splitter DBS 450 + 538 and emission filter DBP 467/24 + 598/110.

Item has been added to the configuration

Filter Set 92 MBP DAPI+GFP+AF594

Recover

Item no.: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594

Item Number: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM MBP 425/30 + 524/50 + 688/145

Item has been added to the configuration

Filter Set 92 LED SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594

Item Number: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter set 92 HE LED (E)

Recover

Item no.: 489092-9110-000

Filter set 92 HE LED (E)

Item Number: 489092-9110-000

Filter set 92 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, GFP and mCherry with excitation wavelengths 385, 475 and 590 nm. Contains beam splitter TBS 405 + 493 + 610 and emission filter TBP 425/30 + 524/50 + 688/145.

Item has been added to the configuration

Filter Set 92 SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594

Item Number: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594 for use with exciation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter Set 91 MBP CFP+YFP+AF594

Recover

Item no.: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594

Item Number: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594 for use with excitation filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM MBP 467/24 + 555/25 + 687/145

Item has been added to the configuration

Filter Set 91 LED SBP CFP+YFP+AF594

Recover

Item no.: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594

Item Number: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter set 91 HE LED (E)

Recover

Item no.: 489091-9110-000

Filter set 91 HE LED (E)

Item Number: 489091-9110-000

Filter set 91 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like CFP, YFP and mCherry with excitation wavelengths 430, 511 and 590 nm. Contains beam splitter TBS 450 + 538 + 610 and emission filter TBP 467/24 + 555/25 + 687/145.

Item has been added to the configuration

Filter Set 91 SBP CFP+YFP+AF594

Recover

Item no.: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594

Item Number: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594 for use with excitation and emission filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM MBP 425/30 + 514/30 + 592/25 + 709/100

Item has been added to the configuration

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter set 90 HE LED (E)

Recover

Item no.: 489090-9110-000

Filter set 90 HE LED (E)

Item Number: 489090-9110-000

Filter set 90 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.

Item has been added to the configuration

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Recover

Item no.: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Item Number: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E) for excitation with multi spectral light sources. Consisting of EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100

Item has been added to the configuration

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9010-000

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9010-000

Filter Set 90 SBP DAPI+GFP+DsRed+Cy5 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter Set 56 MBP GFP+DsRed

Recover

Item no.: 489056-9130-000

Filter Set 56 MBP GFP+DsRed

Item Number: 489056-9130-000

Filter Set 56 MBP GFP+DsRed for use with excitation filter wheel Consisting of: EX BP 469/38 EX BP 540-570 BS 490 + 575 EM MBP 513/28 + 630/98

Item has been added to the configuration

Filter Set 56 LED SBP GFP+DsRed

Recover

Item no.: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed

Item Number: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed for use with Colibri 5/7 and emission filter wheel Consisting of: BS 490 + 575 EM BP 514/30 EM BP 630/98

Item has been added to the configuration

Filter set 56 HE LED (E)

Recover

Item no.: 489056-9110-000

Filter set 56 HE LED (E)

Item Number: 489056-9110-000

Filter set 56 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.

Item has been added to the configuration

Filter Set 56 SBP GFP+DsRed

Recover

Item no.: 489056-9010-000

Filter Set 56 SBP GFP+DsRed

Item Number: 489056-9010-000

Filter Set 56 SBP GFP+DsRed for use with excitation and emission filter wheel Consisting of: EX BP 469/38 EX BP 555/30 BS 490 + 575 EM BP 514/30 EM BP 630/98

Interference filter

Item has been added to the configuration

Interference wide-band filter green, d=32x4

Recover

Item no.: 467803-0000-000

Interference wide-band filter green, d=32x4

Item Number: 467803-0000-000

Interference wide-band filter green, d=32x4

Item has been added to the configuration

IF green filter, d=25x4

Recover

Item no.: 447805-9901-000

IF green filter, d=25x4

Item Number: 447805-9901-000

IF green filter, d=25x4

LP longpass filter

Item has been added to the configuration

Beam combiner 600 nm

Recover

Item no.: 446436-0001-000

Beam combiner 600 nm

Item Number: 446436-0001-000

Beam combiner 600 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 395 nm

Recover

Item no.: 446431-0011-000

Beam combiner 395 nm

Item Number: 446431-0011-000

Beam combiner 395 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 535 nm

Recover

Item no.: 423052-0104-000

Beam combiner 535 nm

Item Number: 423052-0104-000

Beam combiner 535 nm for illumination system Colibri

Various filter accessories

Item has been added to the configuration

Holder for Beam Combiner Colibri

Recover

Item no.: 423052-9112-000

Holder for Beam Combiner Colibri

Item Number: 423052-9112-000

Holder for Beam Combiner Colibri changeable by customer

Beam splitter /combiner

Item has been added to the configuration

Beam combiner 565 nm

Recover

Item no.: 423052-0103-000

Beam combiner 565 nm

Item Number: 423052-0103-000

Beam combiner 565 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 490 nm

Recover

Item no.: 423052-0102-000

Beam combiner 490 nm

Item Number: 423052-0102-000

Beam combiner 490 nm for illumination system Colibri

Item has been added to the configuration

Beam combiner 425 nm

Recover

Item no.: 423052-0101-000

Beam combiner 425 nm

Item Number: 423052-0101-000

Beam combiner 425 nm for illumination system Colibri

Photomicrography (1)

T2 adapter

Item has been added to the configuration

T2-adapter for Canon EOS (EF Bayonet)

Recover

Item no.: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item Number: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Video devices (18)

Video adapter 60 C

Item has been added to the configuration

Adapter Video 60 C 1/3" 0.4x

Recover

Item no.: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Item Number: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Other video adapters

Item has been added to the configuration

Double Adapter Duolink 60N - 2x 60N man.

Recover

Item no.: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man.

Item Number: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man. for mounting two cameras and Dual Camera applications. - interface to microscope: 60N - interface to camera: 2x 60N, arranged in parallel - distance of optical axes: 194 mm - mounting orientation: horizontal, vertical - laser safety: via Laser Safety Kit (optional) - manual switching of light path via filter module (1 filter module with 100% mirror included) - slider with calibration sample - slider with bertrand optics for TIRF adjustment - incl. Calibration Slide Universal D=0 - camera exit 2 adjustable in x/y +/- 1.3 mm, z +2/-13 mm relative to image plane of camera exit 1, rotation +/- 3° - max. image field: 22 mm - max. weight load: 5 kg for each camera exit - height-adjustable supports - dimensions: (W x D x H) ca. 280 mm x 310 mm x 170 mm (with supports), 156 mm (without supports) - weight: ca. 6.2 kg

Item has been added to the configuration

Double adapter 60N - 2x 60N with slider mount

Recover

Item no.: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount

Item Number: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount - slider mount for slider with 100% mirror or slider with beam splitter mount - 2 clickstop positions - mount for filters d=25 mm on both exits alternatively required: - slider with 100% mirror or - slider with beam splitter mount and 50:50 beam splitter or other beam splitters with dimensions 26x36 mm

Item has been added to the configuration

Slider with beam splitter mount for double adapter

Recover

Item no.: 426141-9021-000

Slider with beam splitter mount for double adapter

Item Number: 426141-9021-000

Slider with beam splitter mount for double adapter - 2 clickstop positions for exit straight / lateral - mount for beam splitter 26x36 mm

Item has been added to the configuration

Slider with 100% mirror for double adapter

Recover

Item no.: 426141-9011-000

Slider with 100% mirror for double adapter

Item Number: 426141-9011-000

Slider with 100% mirror for double adapter - 2 clickstop positions for exit straight / lateral

Item has been added to the configuration

Universal Digital Camera Adapter d30 M37/52x0.75

Recover

Item no.: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item Number: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter T2-T2 SLR 2.5x

Recover

Item no.: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item Number: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item has been added to the configuration

Camera Adapter T2-T2 DSLR 1.6x

Recover

Item no.: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item Number: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Item has been added to the configuration

Adapter 60N - 44

Recover

Item no.: 426102-0000-000

Adapter 60N - 44

Item Number: 426102-0000-000

Adapter 60N - 44

Item has been added to the configuration

Adapter 60N for microscope camera, d=30mm

Recover

Item no.: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Item Number: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Measuring and counting components (5)

Object micrometer A (custom-made)

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Recover

Item no.: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Item Number: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer A

Item has been added to the configuration

Stage micrometer for reflected light 5 + 100/100y d=0mm

Recover

Item no.: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm

Item Number: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

D SF objective lens micrometer

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Recover

Item no.: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Item Number: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated - with cover slip d=0.16 mm - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Various measuring devices

Item has been added to the configuration

Focus Linear Sensor with tube adapter plate for Axio Imager.Z2 Vario

Recover

Item no.: 425300-9000-000

Focus Linear Sensor with tube adapter plate for Axio Imager.Z2 Vario

Item Number: 425300-9000-000

Focus Linear Sensor with tube adapter plate for Axio Imager.Z2 Vario Incremental measuring probe for use with Axio Imager.Z2 Vario. Measuring range = 12 mm, nominal measuring resolution = 5 nm - including 2m connecting cable to the control-box

Eyepieces (6)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/25 Br. foc.

Recover

Item no.: 444234-9902-000

Eyepiece E-PL 10x/25 Br. foc.

Item Number: 444234-9902-000

Eyepiece E-PL 10x/25 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/25 Br. foc.

Recover

Item no.: 444034-9000-000

Eyepiece PL 10x/25 Br. foc.

Item Number: 444034-9000-000

Eyepiece PL 10x/25 Br. foc.

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Eyepiece accessories (10)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Crossline graticule, d=26 mm

Recover

Item no.: 474064-0000-000

Crossline graticule, d=26 mm

Item Number: 474064-0000-000

Crossline graticule, d=26 mm

Item has been added to the configuration

Structure comparison disk single grains (I), d=26 mm

Recover

Item no.: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Item Number: 454090-0000-000

Structure comparison disk single grains (I), d=26 mm

Item has been added to the configuration

Format reticle MC 2.5x/ d=26 mm

Recover

Item no.: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item Number: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item has been added to the configuration

Crossline micrometer 14:140, d=26 mm

Recover

Item no.: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Item Number: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Net micrometer 10x10/5:10, d=21 mm

Recover

Item no.: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item Number: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item has been added to the configuration

Micrometer 10:100, d=21 mm

Recover

Item no.: 434011-0000-000

Micrometer 10:100, d=21 mm

Item Number: 434011-0000-000

Micrometer 10:100, d=21 mm

Transmitted-light objectives (1)

A-Plan BrightField

Item has been added to the configuration

Objective A-Plan 100x/0.8 M27

Recover

Item no.: 421090-9800-000

Objective A-Plan 100x/0.8 M27

Item Number: 421090-9800-000

Objective A-Plan 100x/0.8 M27 (FWD=0.97mm)

Reflected-light objectives (57)

Epiplan-Neofluar BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Recover

Item no.: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Item Number: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Recover

Item no.: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Item Number: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27 (FWD=12.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Recover

Item no.: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Item Number: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Recover

Item no.: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Item Number: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Recover

Item no.: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Item Number: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Recover

Item no.: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Item Number: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Recover

Item no.: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Item Number: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm)

Epiplan LD BrightField

Item has been added to the configuration

Objective LD Epiplan 20x/0.4 M27

Recover

Item no.: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27

Item Number: 422850-9900-000

Objective LD Epiplan 20x/0.4 M27 (CG=0mm with or CG=1.5mm without coverglass cap) (FWD=7.2mm at D=0mm)

Epiplan-Apochromat BrightField/DarkField DIC

Item has been added to the configuration

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Recover

Item no.: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Item Number: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27 (FWD=0.21mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Recover

Item no.: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Item Number: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27 (FWD=0.28mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Recover

Item no.: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Item Number: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27 (FWD=1.7mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Recover

Item no.: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Item Number: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27 (FWD=5.0mm)

Epiplan-Apochromat BrightField

Item has been added to the configuration

Objective EC Epiplan-Apochromat 150x/0.95 M27

Recover

Item no.: 422690-9900-000

Objective EC Epiplan-Apochromat 150x/0.95 M27

Item Number: 422690-9900-000

Objective EC Epiplan-Apochromat 150x/0.95 M27 (FWD=0.23mm)

Epiplan-Apochromat DIC

Item has been added to the configuration

Objective C Epiplan-Apochromat 50x/0.95 DIC M27

Recover

Item no.: 422672-9900-000

Objective C Epiplan-Apochromat 50x/0.95 DIC M27

Item Number: 422672-9900-000

Objective C Epiplan-Apochromat 50x/0.95 DIC M27 (FWD=0.22mm) Optimized for 405 nm.

Item has been added to the configuration

Objective C Epiplan-Apochromat 20x/0.7 DIC M27

Recover

Item no.: 422652-9900-000

Objective C Epiplan-Apochromat 20x/0.7 DIC M27

Item Number: 422652-9900-000

Objective C Epiplan-Apochromat 20x/0.7 DIC M27 (FWD=1.3mm) Optimized for 405 nm.

Item has been added to the configuration

Objective C Epiplan-Apochromat 10x/0.4 DIC M27

Recover

Item no.: 422642-9900-000

Objective C Epiplan-Apochromat 10x/0.4 DIC M27

Item Number: 422642-9900-000

Objective C Epiplan-Apochromat 10x/0.4 DIC M27 (FWD=5.4mm) Optimized for 405 nm.

Item has been added to the configuration

Objective C Epiplan-Apochromat 5x/0.2 DIC M27

Recover

Item no.: 422632-9900-000

Objective C Epiplan-Apochromat 5x/0.2 DIC M27

Item Number: 422632-9900-000

Objective C Epiplan-Apochromat 5x/0.2 DIC M27 (FWD=21mm) Optimized for 405 nm.

Epiplan-Apochromat LD DIC

Item has been added to the configuration

Objective LD C Epiplan-Apochromat 50x/0.6 DIC M27

Recover

Item no.: 422672-9800-000

Objective LD C Epiplan-Apochromat 50x/0.6 DIC M27

Item Number: 422672-9800-000

Objective LD C Epiplan-Apochromat 50x/0.6 DIC M27 (FWD=7.6mm) Optimized for 405 nm

Epiplan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Recover

Item no.: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27

Item Number: 422493-9900-000

Objective Epiplan-Neofluar 100x/1.3 Oil Pol M27 (FWD=0.37mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Recover

Item no.: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27

Item Number: 422393-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Recover

Item no.: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27

Item Number: 422373-9800-000

Objective EC Epiplan-Neofluar 50x/0.8 Pol M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Recover

Item no.: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27

Item Number: 422343-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 Pol M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Recover

Item no.: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27

Item Number: 422323-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 Pol M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Recover

Item no.: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27

Item Number: 000000-1156-522

Objective EC Epiplan-Neofluar 20x/0.50 Pol M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Recover

Item no.: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27

Item Number: 000000-1156-512

Objective EC Epiplan-Neofluar 5x/0.13 Pol M27 (FWD=15.8mm)

Epiplan-Neofluar LD BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Recover

Item no.: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Item Number: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27 (FWD=4.1mm)

Epiplan-Neofluar LD DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Recover

Item no.: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Item Number: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27 (FWD=4.0mm)

Epiplan-Neofluar DIC

Item has been added to the configuration

Objective LD C Epiplan-Neofluar 100x/0.75 DIC M27

Recover

Item no.: 422492-9801-000

Objective LD C Epiplan-Neofluar 100x/0.75 DIC M27

Item Number: 422492-9801-000

Objective LD C Epiplan-Neofluar 100x/0.75 DIC M27 (FWD=4.0mm) Optimized for 405 nm

Item has been added to the configuration

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Recover

Item no.: 422472-9900-000

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Item Number: 422472-9900-000

Objective LD EC Epiplan-Neofluar 50x/0.55 DIC M27 (FWD=9.1mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Recover

Item no.: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Item Number: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27 (FWD=12.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Recover

Item no.: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Item Number: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Recover

Item no.: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Item Number: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Recover

Item no.: 422342-9900-000

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Item Number: 422342-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 DIC M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Recover

Item no.: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Item Number: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Recover

Item no.: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Item Number: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27 (FWD=15.8mm)

Epiplan-Neofluar BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Recover

Item no.: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Item Number: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Recover

Item no.: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Item Number: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Recover

Item no.: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Item Number: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Recover

Item no.: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Item Number: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27 (FWD=9mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Recover

Item no.: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Item Number: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27 (FWD=14.5mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Recover

Item no.: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Item Number: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm)

Epiplan-Neofluar BrightField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Recover

Item no.: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Item Number: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Item Number: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Epiplan BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 BD M27

Recover

Item no.: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27

Item Number: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 BD M27

Recover

Item no.: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27

Item Number: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 BD M27

Recover

Item no.: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27

Item Number: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 BD M27

Recover

Item no.: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27

Item Number: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 BD M27

Recover

Item no.: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27

Item Number: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 BD M27

Recover

Item no.: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27

Item Number: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27 (FWD=11.8mm)

Epiplan BrightField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 M27

Recover

Item no.: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27

Item Number: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 M27

Recover

Item no.: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27

Item Number: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 M27

Recover

Item no.: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27

Item Number: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 M27

Recover

Item no.: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27

Item Number: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 M27

Recover

Item no.: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27

Item Number: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 M27

Recover

Item no.: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27

Item Number: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm)

Epiplan Polarization Contrast

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 Pol M27

Recover

Item no.: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27

Item Number: 422073-9902-000

Objective EC Epiplan 50x/0.75 Pol M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 Pol M27

Recover

Item no.: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27

Item Number: 422043-9902-000

Objective EC Epiplan 10x/0.25 Pol M27 (FWD=11.0mm)

Accessories for objectives (4)

Antiflex caps

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Recover

Item no.: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Item Number: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Microscope slides, various accessories

Item has been added to the configuration

Object marker

Recover

Item no.: 000000-1105-072

Object marker

Item Number: 000000-1105-072

Object marker for W 0.8 objective thread, for the point or circle-shaped marking of specimens on standard microscope slides with wipe-resistant red color

Item has been added to the configuration

Refill set for object marker 000000-1105-072

Recover

Item no.: 000000-0428-327

Refill set for object marker 000000-1105-072

Item Number: 000000-0428-327

Refill set for object marker 000000-1105-072

Intermediate rings

Item has been added to the configuration

Adapter M 27x0.75 / W 0.8 H "0"

Recover

Item no.: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Item Number: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Condensers (3)

Condenser, H, PH, D, DIC

Item has been added to the configuration

Condenser, LD achromatic 0.8 H DIC 5x

Recover

Item no.: 424226-9000-000

Condenser, LD achromatic 0.8 H DIC 5x

Item Number: 424226-9000-000

Condenser, LD achromatic 0.8 H DIC 5x with - fixed front lens - 5-position modulator disk - rotary stop for inclined illumination - 3 mounts for DIC prisms For objectives 5x-100x (2.5x-100x with enclosed diffusion disk), WD=8.6 mm

Item has been added to the configuration

Achromatic LD condenser 0.8 H D Ph DIC

Recover

Item no.: 424204-9901-000

Achromatic LD condenser 0.8 H D Ph DIC

Item Number: 424204-9901-000

Achromatic LD condenser 0.8 H D Ph DIC with fixed front lens, 8-position turret disk, with 4 centerable Ph1, Ph2, Ph3 and D stops, already integrated, 3 mounts for DIC condenser modules, 1 separate position for bright field. For objectives 5x-100x, WD=8.6 mm

Condenser, H

Item has been added to the configuration

Condenser, LD achromatic 0.8 H DIC

Recover

Item no.: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC

Item Number: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC with fixed front lens, 1 mount for DIC condenser module. For objectives 5x-100x, WD=8.6 mm

Connecting cables (3)

Illuminator cables

Item has been added to the configuration

Extension cable 6 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item Number: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item has been added to the configuration

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Remote lamp control cable

Item has been added to the configuration

Trigger cable for HXP C light source (D)

Recover

Item no.: 000000-0485-260

Trigger cable for HXP C light source (D)

Item Number: 000000-0485-260

Trigger cable for HXP C light source (D) one side D-Sub 9 for connection to HXP C, other side BNC. Incl. BNC coupling for connection to trigger cable set AxioCam, Trigger Board for Fast Acquisition or Colibri.

Control devices (5)

Motor control units

Item has been added to the configuration

Stage Controller XYZ STEP SMC 2009 Vario

Recover

Item no.: 432929-9020-000

Stage Controller XYZ STEP SMC 2009 Vario

Item Number: 432929-9020-000

Stage Controller XYZ STEP SMC 2009 Vario Control unit for Maerzhaeuser XY-Stages with stepper motors and stand column mot. STEP for Axio Imager Vario. - bidirectional communication to microscopes with CAN - XY position display on microscopes with TFT display and option for objective depended travel speed - manual control of stand column (no software control) - 2 CAN interfaces - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Cables, control unit

Item has been added to the configuration

CAN-bus cable 2.5 m

Recover

Item no.: 457411-9011-000

CAN-bus cable 2.5 m

Item Number: 457411-9011-000

CAN-bus cable 2.5 m

Item has been added to the configuration

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Recover

Item no.: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Item Number: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D) 2 m length

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Image processing (62)

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 mono R2 (D)

Recover

Item no.: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D)

Item Number: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live FrameRates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 mono (D)

Recover

Item no.: 426560-9090-000

Microscopy Camera Axiocam 712 mono (D)

Item Number: 426560-9090-000

Microscopy Camera Axiocam 712 mono (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x 1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.1 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 color (D)

Recover

Item no.: 426560-9080-000

Microscopy Camera Axiocam 712 color (D)

Item Number: 426560-9080-000

Microscopy Camera Axiocam 712 color (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 2048 x 1504 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Adjustable color saturation White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x 1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.1 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)>0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 mono R2 (D)

Recover

Item no.: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D)

Item Number: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 color R2 (D)

Recover

Item no.: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D)

Item Number: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Digital Microscopy Camera Axiocam 305 color R2 (D)

Recover

Item no.: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D)

Item Number: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Recover

Item no.: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Item Number: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D) one side angled for use on Axiocam 5xx/7xx

Item has been added to the configuration

Trigger Cable Set Axiocam 5xx/7xx (D)

Recover

Item no.: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx (D)

Item Number: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Item has been added to the configuration

FireWire Cable 1394b 9pin-9pin 5 m (D)

Recover

Item no.: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Item Number: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Item has been added to the configuration

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Recover

Item no.: 000000-0520-302

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Item Number: 000000-0520-302

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Recover

Item no.: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Item Number: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with english (US) layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Recover

Item no.: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Item Number: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O) Visible diagonal: 95 cm, 21:9 curved Maximum resolution: 3840 x 1600 pixel @ 60 Hz Brightness: 300 cd/m² Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 2.0 Data connectors: 1 x USB Type C (upstream), 3 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 195 W, Typical 80 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 55.9 cm x 89.6 cm x 24.8 cm Weight incl. stand: 13.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 12 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Recover

Item no.: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Item Number: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 Pixel @ 60 Hz Brightness: 400 cd/m² Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, Thunderbolt 4.0 Data connectors: 1 x USB Type-C 5Gbps, 4 x SuperSpeed USB Type-A 5Gbps, 1 x Ethernet RJ45 1Mbps Power consumption: Maximum 180 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 60.49 cm x 71.35 cm x 21.7 cm Weight incl. stand: 9 kg Ergonomic features: Tilt: -5° to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Recover

Item no.: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Item Number: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 pixel Brightness: 350 cd/m² Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.3, 2 x HDMI 2.2 Data connectors: 1 x USB Type C (upstream), 2 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 163 W, Typical 33 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 57.6 cm x 71.7 cm x 23 cm Weight incl. stand: 11 kg Ergonomic features: Tilt: -5°to +35°, Swivel: 344°, Height adjustable 14.9 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC, TCO Operating voltage: 100-120 V / 220-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 32" HP Z32 (O)

Recover

Item no.: 410350-3201-000

Monitor TFT 32" HP Z32 (O)

Item Number: 410350-3201-000

Monitor TFT 32" HP Z32 (O) Visible diagonal: 80 cm, 16:9 Max. resolution: 3840 x 2160 pixel @ 60 Hz Brightness: 350 cd/m2 Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, mini DisplayPort 1.2, HDMI 2.0 3 x USB 3.0, 1 x USB 3.1 Type-C Power consumption: Maximum 185 W, Typical 70 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 56.44 cm x 71.45 cm x 24.8 cm Weight: 12.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +20°, swivel:90°, height adjustable 12 cm Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Recover

Item no.: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Item Number: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 250 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type C (upstream), 4 x SuperSpeed USB Type-A 5 Gbps Power consumption: Maximum 138 W, Typical 30 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.6 cm x 61.3 cm x 21,6 cm Weight incl. stand: 7.6 kg Ergonomic features:Tilt: -5° to +23°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Recover

Item no.: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Item Number: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Recover

Item no.: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Item Number: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Recover

Item no.: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Item Number: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Recover

Item no.: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Item Number: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O)

Recover

Item no.: 410331-2400-000

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O)

Item Number: 410331-2400-000

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O) Professional graphics card for Microscopy Workstation Premium hp Z6 G4 Rev. 2 - 24 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4 (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Recover

Item no.: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Item Number: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs:3 x DisplayPort 1.4 (DP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Processor Intel Xeon Gold 5222 (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410330-0600-000

Processor Intel Xeon Gold 5222 (hp Z6 G4 Rev. 2) (O)

Item Number: 410330-0600-000

Processor Intel Xeon Gold 5222 (hp Z6 G4 Rev. 2) (O) Default processor configuration - Intel® Xeon® Gold 5222 (3.8 GHz, 16.5 MB cache, 4 cores) currently only the configuration with one processor is released - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Item Number: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O) - Extension of default RAID system - Increase capacity from 6 TB (RAID 1) to 12 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 32 GB modules - can be extended to 64 GB (2 x 410303-3205-000), 128 GB (4 x 410303- 3205-000) or 192 GB (6 x 410303-3205-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact Core i5 multilingual (O)

Recover

Item no.: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O)

Item Number: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O) - HP Z240 Tower Workstation - CPU: Intel® CoreTM i5-6500 3.2 GHz 6 MB / 2133 MHz - Chipset: Intel® C236 - Memory: max. 64 GB RAM - Memory Expansion Slots: 4 x DDR3-RAM modules / 2133 MHz unbuffered, non-ECC - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 (x16 mechanical) 1 x PCI Express Generation 3 x4 1 x PCI Express Generation 3 x1 1 M.2 slot (PCIe Gen3 x4) - Graphics interface onboard: Intel® HD Graphics 530 2 x Display Port 1.2 (max. 3840 x 2160 pixel), 1 x DVI-D single link (max. 1920 x 1200 pixel) - Hard Drives: 1 x 4 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: Integrated 10/100/1000 LAN interface - I/O: 1 x serial RS232, 6 x USB 3.0 (2 x front, 4 x rear), 4 x USB 2.0 (2 x front, 2 x rear), PS/2 for keyboard and mouse - Certifications & Declarations: CE, CSA, UL, FCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 400 W with country specific plug - Chassis Dimensions: (H x W x D): 399 x 170 x 442 mm, approx. 10 kg - Rescue kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Recover

Item no.: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Item Number: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O) Installation of Windows 10 Enterprise LTSB 2016 x64 Highend incl. Windows 10 license Installation of ZEN software for LSM 900, LSM 980, Elyra 7, Celldiscoverer 7 and Widefieldsystems Only for Microscopy Workstation Premium hp Z6 G4 Rev. 2 (410203-9912-000)

Memory

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Recover

Item no.: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Item Number: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O) consisting of 1 x 16 GB module

Software for image processing (165)

arivis SMA

Item has been added to the configuration

ZEISS arivis Cloud 1 year Industry

Recover

Item no.: 410145-3035-100

ZEISS arivis Cloud 1 year Industry

Item Number: 410145-3035-100

ZEISS arivis Cloud 1 year Industry The arivis Cloud Industry License is valid for one year, includes 1 arivis Cloud account and is restricted to industry customers. It contains: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

arivis Cloud 1 year Academia

Recover

Item no.: 410145-3034-100

arivis Cloud 1 year Academia

Item Number: 410145-3034-100

arivis Cloud 1 year Academia The arivis Cloud Academia License is valid for one year, includes 2 arivis Cloud accounts and is restricted to academic customers. The 2 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

ZEN core SMA

Item has been added to the configuration

SMA Fee ZEN core with Motorized Acquisition 1 year

Recover

Item no.: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year

Item Number: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Acquisition and all hardware- related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Item has been added to the configuration

SMA Fee ZEN analyzer 1 year

Recover

Item no.: 410139-0035-000

SMA Fee ZEN analyzer 1 year

Item Number: 410139-0035-000

SMA Fee ZEN analyzer 1 year Entitlement to upgrade ZEN analyzer free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN analyzer. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN analyzer configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band A-B") must be included: - AI Toolkit ("SMA ZEN Band B") - 2D Toolkit ("SMA ZEN Band A") - 3D Toolkit ("SMA ZEN Band A") - Connect Toolkit ("SMA ZEN Band A") - Materials Apps ("SMA ZEN Band A") - TCA Modul ("SMA ZEN Band A") - NMI Modul ("SMA ZEN Band A") - Developer Toolkit ("SMA ZEN Band A") - GxP Toolkit ("SMA ZEN Band A")

Item has been added to the configuration

SMA Fee ZEN core 1 year

Recover

Item no.: 410139-0011-000

SMA Fee ZEN core 1 year

Item Number: 410139-0011-000

SMA Fee ZEN core 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Focus Acquisition and all hardware-related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

ZEN Modules image analysis

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.9

Recover

Item no.: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9

Item Number: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.8

Recover

Item no.: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8

Item Number: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.9

Recover

Item no.: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9

Item Number: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.8

Recover

Item no.: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8

Item Number: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.9

Recover

Item no.: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9

Item Number: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.8

Recover

Item no.: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8

Item Number: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.9

Recover

Item no.: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9

Item Number: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.8

Recover

Item no.: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8

Item Number: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Recover

Item no.: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Item Number: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.9 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Recover

Item no.: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Item Number: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic Upgrade of an existing ZEN desk Floating License to ZEN 3.8 desk Floating License Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Recover

Item no.: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Item Number: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Recover

Item no.: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Item Number: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Recover

Item no.: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Item Number: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Recover

Item no.: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Item Number: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Recover

Item no.: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Item Number: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Recover

Item no.: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Item Number: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Recover

Item no.: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Item Number: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.9 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Recover

Item no.: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Item Number: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.8 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or newer does not require this item.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk

Recover

Item no.: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk

Item Number: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk Upgrade of an existing ZEN desk software to ZEN 3.9 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.8 desk

Recover

Item no.: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk

Item Number: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk Upgrade of an existing ZEN desk software to ZEN 3.8 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.9

Recover

Item no.: 410138-0102-390

Upgrade ZEN to ZEN 3.9

Item Number: 410138-0102-390

Upgrade ZEN to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.8

Recover

Item no.: 410138-0102-380

Upgrade ZEN to ZEN 3.8

Item Number: 410138-0102-380

Upgrade ZEN to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

ZEN Module Direct Processing

Recover

Item no.: 410136-1103-260

ZEN Module Direct Processing

Item Number: 410136-1103-260

ZEN Module Direct Processing The module permits the processing of images directly during acquisition. This can accelerate workflows significantly, as already shortly after acquisition, the processed images are available. Supported are the processing functions Airyscan, Apotome, Deblurring, Deconvolution, Denoising, and Unshard Mask. Processing can be configured to run on a dedicated processing workstation, which is connected to the acquisition workstation via a network connection. The processing workstation requires the ZEN desk license.

Item has been added to the configuration

ZEN Intellesis Segmentation

Recover

Item no.: 410136-1089-340

ZEN Intellesis Segmentation

Item Number: 410136-1089-340

ZEN Intellesis Segmentation Simple and user-friendly tool for image segmentation using machine- learning methods incl Deep Learning approaches. Depending on the method the user can either use a dedicated labelling interface to annotate images to train a model or import a pre-trained model for an external source, for example from the APEER platform. In addition it is also possible to obtain pre-trained for specific purposes as part of a customized solution (SCS) as a commercial service. In a subsequent processing step, the trained model can be used to segment images or to create an image analysis setting (CZIAS), which uses the trained model inside its segmentation step (as an alternative method to classical thresholding). The module supports any image data format that can be imported into ZEN blue / ZEN core incl. Data imported via the 3rd party import from other vendors and can process multidimensional datasets including z-stacks, multi-channel and tile images. Trained Models can be also used inside the following material modules in ZEN Core: - Grain Size Analysis - Multiphase Analysis - Layer Thickness Measurement Important: For the usage of trained models inside the Image Analysis the ZEN Module Image Analysis is required.

Item has been added to the configuration

ZEN Module Physiology

Recover

Item no.: 410136-1019-110

ZEN Module Physiology

Item Number: 410136-1019-110

ZEN Module Physiology Tool for the analysis of physiological time series data, with Ca2+ calibration, including mean ROI measurement.

Item has been added to the configuration

ZEN Module FRAP Efficiency Analysis

Recover

Item no.: 410136-1010-250

ZEN Module FRAP Efficiency Analysis

Item Number: 410136-1010-250

ZEN Module FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs.

Image processing 3rd Party SW

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9 Floating License

Recover

Item no.: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License

Item Number: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.9 Floating License Note: The upgrade consists only of the ZEN analyzer 3.9 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8 Floating License

Recover

Item no.: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License

Item Number: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.8 Floating License Note: The upgrade consists only of the ZEN analyzer 3.8 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9 with Motorized Acquisition

Recover

Item no.: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition

Item Number: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.9 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8 with Motorized Acquisition

Recover

Item no.: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition

Item Number: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.8 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9

Recover

Item no.: 410138-0135-390

Upgrade to ZEN analyzer 3.9

Item Number: 410138-0135-390

Upgrade to ZEN analyzer 3.9 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.9 Note: The upgrade consists only of the ZEN analyzer 3.9 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8

Recover

Item no.: 410138-0135-380

Upgrade to ZEN analyzer 3.8

Item Number: 410138-0135-380

Upgrade to ZEN analyzer 3.8 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.8 Note: The upgrade consists only of the ZEN analyzer 3.8 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9

Recover

Item no.: 410138-0111-390

Upgrade to ZEN core 3.9

Item Number: 410138-0111-390

Upgrade to ZEN core 3.9 Upgrade of an existing ZEN core software version to ZEN core 3.9 Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8

Recover

Item no.: 410138-0111-380

Upgrade to ZEN core 3.8

Item Number: 410138-0111-380

Upgrade to ZEN core 3.8 Upgrade of an existing ZEN core software version to ZEN core 3.8 Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Transfer ZEN to ZEN core 3.9

Recover

Item no.: 410138-0011-390

Transfer ZEN to ZEN core 3.9

Item Number: 410138-0011-390

Transfer ZEN to ZEN core 3.9 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.9 Consisting of: - ZEN core 3.9 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.8

Recover

Item no.: 410138-0011-380

Transfer ZEN to ZEN core 3.8

Item Number: 410138-0011-380

Transfer ZEN to ZEN core 3.8 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.8 Consisting of: - ZEN core 3.8 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

ZEN Basic Software

Item has been added to the configuration

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Recover

Item no.: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Item Number: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN 2.6 pro blue edition. Consisting of: - ZEN 2.6 pro basic license - ZEN module Experiment Designer

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.7

Recover

Item no.: 410138-0902-370

Platform change AV 4.x to ZEN 3.7

Item Number: 410138-0902-370

Platform change AV 4.x to ZEN 3.7 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.7 Consisting of: - ZEN 3.7 basic license - entitles to purchase ZEN Packages/Toolkits with a discount

Item has been added to the configuration

Upgrade ZEN 3.4 to ZEN 3.7

Recover

Item no.: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7

Item Number: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7 Upgrade of an existing ZEN 3.4 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.4 installation

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.7 desk

Recover

Item no.: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk

Item Number: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk Upgrade of an existing ZEN desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Modules as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.5 to ZEN 3.7

Recover

Item no.: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7

Item Number: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7 Upgrade of an existing ZEN 3.5 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.5 installation

Item has been added to the configuration

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Recover

Item no.: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Item Number: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk Upgrade of an existing ZEN 3.6 desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Functions as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.6 to ZEN 3.7

Recover

Item no.: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7

Item Number: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7 Upgrade of an existing ZEN 3.6 software to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.6 installation

Item has been added to the configuration

ZEN Toolkit Molecular Quantification for ZEN desk

Recover

Item no.: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk

Item Number: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution for ZEN desk

Recover

Item no.: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk

Item Number: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques.

Item has been added to the configuration

ZEN Toolkit 3D for ZEN desk

Recover

Item no.: 410137-0172-370

ZEN Toolkit 3D for ZEN desk

Item Number: 410137-0172-370

ZEN Toolkit 3D for ZEN desk This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifyingautomatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Developer for ZEN desk

Recover

Item no.: 410137-0171-370

ZEN Toolkit Developer for ZEN desk

Item Number: 410137-0171-370

ZEN Toolkit Developer for ZEN desk Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can futher extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core).

Item has been added to the configuration

ZEN Toolkit Connect for ZEN desk

Recover

Item no.: 410137-0170-370

ZEN Toolkit Connect for ZEN desk

Item Number: 410137-0170-370

ZEN Toolkit Connect for ZEN desk This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (required 3Dxl) - ManualAlignment oftwo3D stacks (required 3Dxl)** - Import FIB stacks (*not ZEN lite <(>&<)> ZEN starter; motorized stage required) (**not available in ZENCore)

Item has been added to the configuration

ZEN Toolkit AI for ZEN desk

Recover

Item no.: 410137-0169-370

ZEN Toolkit AI for ZEN desk

Item Number: 410137-0169-370

ZEN Toolkit AI for ZEN desk The Intellesis AI Package allows to train, import and execute different machine- and deep-learning models inside ZEN and ZEN core. It contains three major AI core functionalities: - Machine- and Deep-Learning for segmenting images (training of Deep- Learning models on APEER or externally) - Machine-Learning for Object Classification in analyzed images (requires analyzed image data) - Deep-Learning based Denoising using Noise2Void (no need for labels) For every workflowexists as dedicated tool to label images or objects and train the respective model. The package supports any image data format that can be imported into ZEN and ZEN core incl. data imported via the 3rd party import from other vendors and can process multidimensional datasets including z-stacks, multi-channel and tile images. - Additionally the labeling and training of Deep Neural networks can be purchased as as part of a special customize solution (SCS). -The complete ZEN platform is "AI ready", i.e.trained models can be used in all image analysis tools in ZEN and ZEN core (e.g. Image Analysis, Bio Apps, Guided Acquisition, Technical Cleanliness Analysis, Metallography package,...) for segmentation. To run trained models within these modules, the ZEN Intellesis AI package is not required. - Important: Recommended hardware configuration is 8GB GPU and 64GB RAM. Only Nvidia GPUs and the CPU are supported.

Item has been added to the configuration

ZEN Toolkit 2D for ZEN desk

Recover

Item no.: 410137-0168-370

ZEN Toolkit 2D for ZEN desk

Item Number: 410137-0168-370

ZEN Toolkit 2D for ZEN desk Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizardprovides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally toclassical segmentationmethods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. Afterrunning the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belongingto the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups.

Item has been added to the configuration

ZEN Module LSM plus for ZEN desk

Recover

Item no.: 410137-0136-370

ZEN Module LSM plus for ZEN desk

Item Number: 410137-0136-370

ZEN Module LSM plus for ZEN desk Module for resolution enhancement of confocal channels

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-370

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-370

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-360

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-360

ZEN Toolkit Bio Apps Floating License Image analysis for standard life science applications. The package contains a collection of Bio Apps that allow users to analyze images from standard life science applications in a simple and user-friendly way.The package includes Bio Appsfor cell counting, confluence measurement, gene- and protein expression, and automated spot detection, and is particularly suitable for analyzing experiments on multiwell plates. All Bio Apps are "AI-ready" and allow the use ofmachine learning models forimage segmentation. The analysis results are presented in interactive measurement tables and various plots. - Simple setup tailored to the specific application - Selection between fast classical segmentation or machine learning (AI) - Predefined parameters enhance ease-of-use - Dedicated and interactive result display (table, heatmap, timeseries, xy-scatterplot, histogram) - Simple export of results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: The use of AI segmentation requires an installation of ZeissPython. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Deconvolution Floating License

Recover

Item no.: 410136-2173-360

ZEN Toolkit Deconvolution Floating License

Item Number: 410136-2173-360

ZEN Toolkit Deconvolution Floating License Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 3D Floating License

Recover

Item no.: 410136-2172-360

ZEN Toolkit 3D Floating License

Item Number: 410136-2172-360

ZEN Toolkit 3D Floating License This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer Floating License

Recover

Item no.: 410136-2171-360

ZEN Toolkit Developer Floating License

Item Number: 410136-2171-360

ZEN Toolkit Developer Floating License Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Connect Floating License

Recover

Item no.: 410136-2170-360

ZEN Toolkit Connect Floating License

Item Number: 410136-2170-360

ZEN Toolkit Connect Floating License This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy* - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*motorized stage required) (**not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 2D Floating License

Recover

Item no.: 410136-2168-360

ZEN Toolkit 2D Floating License

Item Number: 410136-2168-360

ZEN Toolkit 2D Floating License Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze imagedata. The wizard provides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally to classical segmentation methods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. After running the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belonging to the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit GxP Floating License

Recover

Item no.: 410136-2163-350

ZEN Toolkit GxP Floating License

Item Number: 410136-2163-350

ZEN Toolkit GxP Floating License The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process Floating License allows the flexible usage of the license on different clients within a networkenvironment.

Item has been added to the configuration

ZEN Toolkit Materials Apps Floating License

Recover

Item no.: 410136-2162-350

ZEN Toolkit Materials Apps Floating License

Item Number: 410136-2162-350

ZEN Toolkit Materials Apps Floating License This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximumdiameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 63942002 - Non-metallic inclusions (NMI): ISO4967:2013; GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004 Floating License allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.5 Floating License

Recover

Item no.: 410135-2035-350

ZEN analyzer 3.5 Floating License

Item Number: 410135-2035-350

ZEN analyzer 3.5 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - APEER (on-site) connectorenables the execution of customized solutions by integrating modules from the APEER platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN starter basic software (O)

Recover

Item no.: 410135-1010-000

ZEN starter basic software (O)

Item Number: 410135-1010-000

ZEN starter basic software (O) ZEN starter with basic functionality and user interface of ZEN core. Drivers for Axiocam cameras and image acquisition (SNAPs). No microscope control. - Configurable graphical user interface including workbench concept - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - Panorama for acquisition of Tiles Images with manual stage - Online Panorama for creation of stitched images on un-coded/ un- motorized stages - Video recorder functionality with movie export functionality - Manual Extended Focus (EDF) capability - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements and text annotations - Using of Microsoft Word report templates - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - Can only be extended with ZEN Toolkit Basic Acquisition and ZEN Module Coded Microscope Differences compared with ZEN core: - No microscope control - Limited image processing functions - No Job functionality - No HDR -Acquisition of High Dynamic Range Images Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN 3.5 desk

Recover

Item no.: 410135-1004-350

ZEN 3.5 desk

Item Number: 410135-1004-350

ZEN 3.5 desk ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope control, deliverable with an existing license of ZEN pro or ZEN system. Includes the basic ZEN functionality, and the modules of the respectiveZEN pro or ZEN system license without image acquisition. The following modules are always included: - ZEN Module Image Analysis - ZEN Module Extended Focus

Item has been added to the configuration

ZEN 3.5 system

Recover

Item no.: 410135-1003-350

ZEN 3.5 system

Item Number: 410135-1003-350

ZEN 3.5 system Image acquisition and processing under Windows 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following modules are included: - ZEN Module Measurement - ZEN Module Multi Channel - ZEN Module Panorama - ZEN Module Manual Extended Focus - ZEN Module Image Analysis - ZEN Module Time Lapse - ZEN Module Z Stack - ZEN Module Extended Focus - ZEN Module Autofocus - ZEN Module Colocalisation - ZEN Module Spectral Unmixing (LSM only) - ZEN Module 3Dxl

Item has been added to the configuration

ZEN 3.7 desk

Recover

Item no.: 410135-0004-370

ZEN 3.7 desk

Item Number: 410135-0004-370

ZEN 3.7 desk ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.7

Recover

Item no.: 410135-0002-370

ZEN 3.7

Item Number: 410135-0002-370

ZEN 3.7 Image acquisition and processing under Windows 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Connect basic - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN Module Data Management

Item has been added to the configuration

Upgrade ZEN Data Explorer Viewer

Recover

Item no.: 410138-0931-360

Upgrade ZEN Data Explorer Viewer

Item Number: 410138-0931-360

Upgrade ZEN Data Explorer Viewer Conversion of an existing ZEN Data Storage Server License (Version 22.40 or older) into a license compatible with version 23.xx (or higher). The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. The newly integrated viewer, based on server side rendering, significantly enhances the display performance which is mainly reflected in the fast display of large and very large image files. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version: 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android Version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

Item has been added to the configuration

ZEN Module Sample Navigator

Recover

Item no.: 410136-0107-370

ZEN Module Sample Navigator

Item Number: 410136-0107-370

ZEN Module Sample Navigator Module for simple overview scan with autofocus function on LSM, with Axiocam or transmitted light fluorescence with T-PMT.

Item has been added to the configuration

Software Module LM-EM Correlative Microscopy

Recover

Item no.: 410136-0078-370

Software Module LM-EM Correlative Microscopy

Item Number: 410136-0078-370

Software Module LM-EM Correlative Microscopy Materials Module for image recording, navigation and correlation on light, digital and electron microscopes. - Software module for ZEN core and Smartzoom 5 software - Semi-automatic calibration of ZEISS Correlative Microscopy specimen holder - Manual calibration of custom holders and specimens with any type of fiducials - Definition of regions and points of interest (ROI/POI) - ZEN core only: Easy recovery of previously marked sample ROIs and POIs - ZEN core only: Alignment and overlay of light, digital and electron microscope images and creation of new overlay images - ZEN core only: Automated alignment of images using algorithms for key point detection

Item has been added to the configuration

ZEN Data Storage Server

Recover

Item no.: 410135-0031-360

ZEN Data Storage Server

Item Number: 410135-0031-360

ZEN Data Storage Server Database for storage and multi-client access of documents on a centralized server. ZEN applications can connect to the server as clients to store and retrieve data. ZEN Data Storage provides a client-server database solution for microscopy customers who deal with the storage of large amounts of data originating from one or several microscopes. ZEN Data Storage allows the exchange of data and workflows and supports microscopists who want to separate image acquisition from post-acquisition work. In this way it also facilitates correlative workflows where the data of a sample can be accessed from a centralized location. "Server side rendering" based display enables the user to visualize also very large files in a fast and seamless way. The centralized ZEN Data Storage enables IT managers to ensure data security and backup availability. It allows to manage users and user rights within a laboratory or even across multiple sites. Main features: - Scalable server database solution based on MS-SQL server - Integration into existing server landscape possible - Multi-client concurrent access to data - Server based user and access management - Integration of user management with Active Directory possible - Data access management on user and group level (ZEN blue only) - Full archive integration for ZEN core including storage of documents and templates - Optional: Compatible with ZEN Module GxP in ZEN core The package includes: ZEN Data Explorer - browser or app based client which allows access and viewing of the data stored on the ZEN Data Storage. Main features: - Gallery for browsing, grouping and searching of data - Viewer for images and ZEN Connect projects - Basic annotation functionality - Upload of images and camera snapshots (app version only) - Download and Snapshot functionality - Available in Browser or as app for iOS and Android ZEN Data Storage Uploader - upload tool which monitors a drop folder and uploads and if needed converts the files to CZI. Supported files types CZI, ZVI, Leica LIF, Nikon ND2, Olympus TIF, PDF The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

ZEN core Platform change

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.9

Recover

Item no.: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9

Item Number: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.9. Consisting of: - ZEN core 3.9 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.8

Recover

Item no.: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8

Item Number: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.8. Consisting of: - ZEN core 3.8 basic license - entitles to purchase ZEN Toolkits with a discount

ZEN modules image processing

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.9

Recover

Item no.: 410138-0902-390

Platform change AV 4.x to ZEN 3.9

Item Number: 410138-0902-390

Platform change AV 4.x to ZEN 3.9 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.9 Consisting of: - ZEN 3.9 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.8

Recover

Item no.: 410138-0902-380

Platform change AV 4.x to ZEN 3.8

Item Number: 410138-0902-380

Platform change AV 4.x to ZEN 3.8 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.8 Consisting of: - ZEN 3.8 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

ZEN Module Lattice Lightsheet Processing

Recover

Item no.: 410136-1125-320

ZEN Module Lattice Lightsheet Processing

Item Number: 410136-1125-320

ZEN Module Lattice Lightsheet Processing ZEN Module to process Lattice Lightsheet data. Contains ZEN Module Remote Processing

Item has been added to the configuration

ZEN Module 3Dxl (O)

Recover

Item no.: 410136-1068-210

ZEN Module 3Dxl (O)

Item Number: 410136-1068-210

ZEN Module 3Dxl (O) Module for visualization and analysis of 3D or 4D image data. 3Dxl features the rendering of ray-tracing-based volume models (transparency), surface renderings and maximum intensity projection renderings. Time series (4D)/movies, the generation and export of movies as well as tools for interactive 3D measurements are included. 3Dxl is powered by technology from arivis AG (www.arivis.com) and is thus optimized to handle data sets that are larger than Graphics memory.

Item has been added to the configuration

ZEN Module Colocalisation

Recover

Item no.: 410136-1027-110

ZEN Module Colocalisation

Item Number: 410136-1027-110

ZEN Module Colocalisation Module for quantitative analysis of colocalisation between two channels of multichannel fluorescence images with the aid of a scatter plot. Coefficients e.g. Pearsons, Manders; mask function.

Item has been added to the configuration

ZEN Module 3D VisArt Hardware License Key

Recover

Item no.: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key

Item Number: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key Module for visualisation of 3D image stacks as volume models, time series (4D)/movies, various rendering methods, maximum intensity projections. Tools for interactive 3D measurements.

Item has been added to the configuration

ZEN Module Deconvolution

Recover

Item no.: 410136-1021-230

ZEN Module Deconvolution

Item Number: 410136-1021-230

ZEN Module Deconvolution Module for improvement of 3D image stacks with 3D deconvolution algorithms, methods for theoretical PSF.

Item has been added to the configuration

ZEN Module Deconvolution Hardware License Key

Recover

Item no.: 410136-1021-110

ZEN Module Deconvolution Hardware License Key

Item Number: 410136-1021-110

ZEN Module Deconvolution Hardware License Key Module for improvement of 3D image stacks with 3D deconvolution algorithms, methods for theoretical PSF.

ZEN modules image recording

Item has been added to the configuration

ZEN SEM Module Shuttle & Find Hardware License Key

Recover

Item no.: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key

Item Number: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key. Module for acquisition of SEM images and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with SEM - Import of light microscopy images with position data to SEM and XB - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN Module HDR Confocal Basic Hardware License Key

Recover

Item no.: 410136-1067-210

ZEN Module HDR Confocal Basic Hardware License Key

Item Number: 410136-1067-210

ZEN Module HDR Confocal Basic Hardware License Key High dynamic range imaging by automatic acquisition and merging of images with different excitation intensities.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-380

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-380

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Module Shuttle & Find Software License Key

Recover

Item no.: 410136-0056-120

ZEN Module Shuttle & Find Software License Key

Item Number: 410136-0056-120

ZEN Module Shuttle & Find Software License Key Module for acquisition and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with light microscope - Transfer of images with position data to SEM and XB running Shuttle & Find module under ZEN software - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN 3.9 desk floating license

Recover

Item no.: 410135-2004-390

ZEN 3.9 desk floating license

Item Number: 410135-2004-390

ZEN 3.9 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk floating license

Recover

Item no.: 410135-2004-380

ZEN 3.8 desk floating license

Item Number: 410135-2004-380

ZEN 3.8 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9 desk

Recover

Item no.: 410135-0004-390

ZEN 3.9 desk

Item Number: 410135-0004-390

ZEN 3.9 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk

Recover

Item no.: 410135-0004-380

ZEN 3.8 desk

Item Number: 410135-0004-380

ZEN 3.8 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9

Recover

Item no.: 410135-0002-390

ZEN 3.9

Item Number: 410135-0002-390

ZEN 3.9 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.8

Recover

Item no.: 410135-0002-380

ZEN 3.8

Item Number: 410135-0002-380

ZEN 3.8 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN Module Image Analysis

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Advanced

Recover

Item no.: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced

Item Number: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced ZEN Module Dynamics Profiler Advanced for ZEN desk with additional flow- and diffusion analysis functionality. The ZEN desk Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN desk Module Lattice SIM

Recover

Item no.: 410137-0133-390

ZEN desk Module Lattice SIM

Item Number: 410137-0133-390

ZEN desk Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods.

Item has been added to the configuration

ZEN desk Module SMLM

Recover

Item no.: 410137-0041-390

ZEN desk Module SMLM

Item Number: 410137-0041-390

ZEN desk Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification Floating License

Recover

Item no.: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License

Item Number: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, withRatiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery/ decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data whichhave been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulationisexecuted either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching). Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module LSM plus Floating License

Recover

Item no.: 410136-2136-370

ZEN Module LSM plus Floating License

Item Number: 410136-2136-370

ZEN Module LSM plus Floating License Module for resolution enhancement of confocal channels Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Lattice SIM floating license

Recover

Item no.: 410136-2133-390

ZEN Module Lattice SIM floating license

Item Number: 410136-2133-390

ZEN Module Lattice SIM floating license ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module SMLM floating license

Recover

Item no.: 410136-2041-390

ZEN Module SMLM floating license

Item Number: 410136-2041-390

ZEN Module SMLM floating license The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Confocal Topography Floating Licenses

Recover

Item no.: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses

Item Number: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses Module for analysis of surface data and visualisation of measument results. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Recover

Item no.: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Item Number: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License The module enables global fitting for all data sets loaded and contains extended parameter sets for Fit models as well as the ability to create own Fit Models. Floating License allows theflexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Spectral RICS

Recover

Item no.: 410136-0182-390

ZEN Module Spectral RICS

Item Number: 410136-0182-390

ZEN Module Spectral RICS Single-molecule analysis based on raster image correlation spectroscopy. The calculation of CPM (Counts per Molecule) values allows the optimization of the hardware settings for the experiment. The calibration step with known dye solutions defines the confocal volume for quantitative data. Images of several different fluorescently labeled molecules can be clearly separated into image channels using single spectra. The typical crosstalk of the signals into other channels is thus resolved, which enables the calculation of correlations of different molecules to each other (cross-correlation). For analysis, regions in the image can be defined and threshold values can be set. Analysis masks can be created based on image regionsof the same image or a different image. The analysis uses a model of the three-dimensional diffusion of a single molecule. There are three different representations of the analysis to choose from: threshold-based standard analysis, Grid-based heatmap and Intensity-based heat map. In addition to the diffusion velocities, various other result parameters are summarized in a table.

Item has been added to the configuration

ZEN Toolkit 3D

Recover

Item no.: 410136-0172-360

ZEN Toolkit 3D

Item Number: 410136-0172-360

ZEN Toolkit 3D Unlock the full 3D potential with the Toolkit 3D. Equip yourself with a collection of rendering methods, tools for sophisticated visualization and data navigation as well as 3D image analysis. The 3D Toolkit offers multiple types of rendering methods allowing you to choose the visualization that best fits your application. A sophisticated 3D rendering can be overwhelming when exploring a data set. With the viewer available with ZEN 3D Toolkit, 3D and 2D views are placed side-by-side so you may navigate in the 3D space seamless through your sample. Analyze your 3D data – a user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Segmentation is AI-ready: load your Intellesis models or segment object based on thresholding. The resulting objects are visualized in 3D in glass or opaque mode. The measurements include various geometric and intensity measurements, as well as user-defined measurement parameters* which can be sorted and exported. The 3D viewer requires a dedicated up-to-date graphics card with full OpenGL 4.3+ support. Older AMD graphic cards such as AMD FirePro V4900 1GB or ATI FirePro V5800 1GB are not supported any longer. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit 2D

Recover

Item no.: 410136-0168-360

ZEN Toolkit 2D

Item Number: 410136-0168-360

ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Module SMLM

Recover

Item no.: 410136-0041-390

ZEN Module SMLM

Item Number: 410136-0041-390

ZEN Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Special acquisition modalities allow 3- dimensional acquisition via a phase ramp, as well as iterative sequential excitation of two differently labeled molecules.

ZEN modules image acquisition

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Basic

Recover

Item no.: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic

Item Number: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic for ZEN desk with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced Floating License

Recover

Item no.: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License

Item Number: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License ZEN Module Dynamics Profiler Advanced Floating License with additional flow- and diffusion analysis functionality. The Module Dynamics Profiler Basic Floating License is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-2178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-2178-380

ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic Floating License with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Airyscan Joint Deconvolution Floating License

Recover

Item no.: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License

Item Number: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License ZEN Module Airyscan Joint Deconvolution, additional deconvolution for Airyscan SR data (4 or 32 phase format). Intelligent algorithm based on Joint Iterative methods. Selectable iteration numberfor maximum results and ease of use. Provides superresolution results down to 90nm lateral resolution with suiting samples on LSM systems with Airyscan detection module.

Item has been added to the configuration

ZEN Module Counting and basic FCS Floating License

Recover

Item no.: 410136-2079-370

ZEN Module Counting and basic FCS Floating License

Item Number: 410136-2079-370

ZEN Module Counting and basic FCS Floating License Enables image acquisition in counting mode for GaAsP detectors: 2+4ch Quasar and 2+32ch Quasar (both need additional HW), 2+1ch Quasar, cooled MA-PMT and BiG.2. The Modulea also enables the acquisition of fluorescence correlation spectroscopy data (FCS) with one channel (autocorrelation) providing one Fit Model. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan floating license

Recover

Item no.: 410136-2064-380

ZEN Module Airyscan floating license

Item Number: 410136-2064-380

ZEN Module Airyscan floating license Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format. Floating license allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan Floating License

Recover

Item no.: 410136-2064-370

ZEN Module Airyscan Floating License

Item Number: 410136-2064-370

ZEN Module Airyscan Floating License Module for processing of image data acquired with Airyscan. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module FCS FCCS Add-on PCH Floating License

Recover

Item no.: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License

Item Number: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License Provides the entry function to calculate Number and Brightness of molecule populations. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Counting Add-on FCS and FCCS Floating License

Recover

Item no.: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License

Item Number: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License Enables Fluorescence Correlation and Cross-Correalation Spectroscopy using any counting capable GaAsP-PMT and MA-PMT detectors. The software includes single molecule analyses, an extended range ofFit Models and the acquisition of spectral FCS / FCCS data. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced

Recover

Item no.: 410136-0179-380

ZEN Module Dynamics Profiler Advanced

Item Number: 410136-0179-380

ZEN Module Dynamics Profiler Advanced Dynamics Profiler Advanced enables to collect unique molecular characteristics of fluorescently labelled proteins or other molecules. Using the individual detector elements of the Airyscan detector, specific fluorescence correlation spectroscopy (FCS) techniques provide additional area-based information. In addition to classic FCS parameters (see SW ZEN Module Dynamics Profiler Basic) every measurement includes the opportunity to analyze a) Dynamics with pair correlation to investigate e.g., diffusion barriers and b) active flow providing speed in µm/s and its direction. The Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-0178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-0178-380

ZEN Module Dynamics Profiler Basic Dynamics Profiler allows to gather details of the molecular characteristics of living samples – providing concentration and dynamics information of fluorescently labelled molecules. Expanding the capability of the Airyscan detector and utilizing the area information gathered from 32 circular arranged detection elements for fluorescence correlation spectroscopy (FCS). Data acquisition is guided by a wizard which serves both simplicity and usability. Using the context of a reference image up to 10 measurement spots can be obtained consecutively and analyzed by various fit models. Additionally, the Raw data of all Airyscan detection elements can be exported and used for individual analysis.

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in thecamera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-380

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-380

ZZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Connect

Recover

Item no.: 410136-0170-360

ZEN Toolkit Connect

Item Number: 410136-0170-360

ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Smart Acquisition

Recover

Item no.: 410136-0167-360

ZEN Toolkit Smart Acquisition

Item Number: 410136-0167-360

ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-390

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-390

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-380

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-380

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drivebacklash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-370

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-370

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment. - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility. - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field. -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-390

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-390

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Base Acquisition

Recover

Item no.: 410136-0164-360

ZEN Toolkit Base Acquisition

Item Number: 410136-0164-360

ZEN Toolkit Base Acquisition Acquire images including Time lapse, multi-channel fluorescence <(>&<)> brightfield. This package allows to acquire fluorescence and transmitted light images as well as contrast methods in independent channels. Furthermore, it provides functionality to acquire a time-lapse image of dynamic samples. For multi-channel acquisitions the following features are available: - Acquisition of multiple independent channels for reflected light and transmitted light techniques - Dyes (including wavelength information) can be selected from a database containing more than 500 dyes or fluorescent proteins, and for all common transmitted light contrast techniques supported by the acquisition system (e.g. brightfield, phase contrast, DIC, darkfield, etc.) - Smart setup generation of the required microscope setting for a channel that is added - Possibility of adjusting light intensity and camera settings manually for each channel - Display of channels in a pseudo color image with overlay option or as a monochrome single channel display - Possibility to generate shading corrections for each channel - A focus reference channel can be defined For time-lapse acquisition following functionality exists: - Definition of time series by selection of intervals, total duration or number of cycles. - Control via time, trigger* or manually *only ZEN

Item has been added to the configuration

ZEN Toolkit Materials Apps

Recover

Item no.: 410136-0162-350

ZEN Toolkit Materials Apps

Item Number: 410136-0162-350

ZEN Toolkit Materials Apps This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximum diameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 6394 2002 - Non-metallic inclusions (NMI): GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004

Item has been added to the configuration

ZEN Module Lattice SIM

Recover

Item no.: 410136-0133-390

ZEN Module Lattice SIM

Item Number: 410136-0133-390

ZEN Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods

Item has been added to the configuration

ZEN Module Airyscan

Recover

Item no.: 410136-0064-380

ZEN Module Airyscan

Item Number: 410136-0064-380

ZEN Module Airyscan Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Module HDR Confocal Basic Hardware License Key

Recover

Item no.: 410136-0007-370

ZEN Module HDR Confocal Basic Hardware License Key

Item Number: 410136-0007-370

ZEN Module ROI-HDR ROI High Dynamic Range Imaging. Acquisition and display of HDR image data with extended dynamic range, incl. illumination blanking.

ZEN image processing modules

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-380

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-380

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Modul Lattice Lightsheet Processing Floating License

Recover

Item no.: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License

Item Number: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License Lattice Lightsheet specific image processing functions for data collected with this instrument. Includes the processing functions Deskew and Subset. Both can be used singly or in combination. Furthermore, there is the possibility to start a deconvolution (singly or in combination with the other two Processing functions) if the deconvolution toolkit required for deconvolution is installed. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox Floating License

Recover

Item no.: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License

Item Number: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-370

ZEN Toolkit Bio Apps

Item Number: 410136-0175-370

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps one, that fits your application and simply adapt the preconfigured Bio App to your data if necessary. Use fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models in the Bio Apps without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a DNN trained on apeer for semantic or instance segmentation in the BioApp. After analysis, the segmented images are displayed along with customized results tables and diagrams (e.g., heatmaps and scatterplots) so you can get a quick overview of your sample. At the same time, tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with Bio Apps tailored to specific applications - Available Bio Apps: Cell counting, confluency, gene- and protein expression and automated spot detection - Easy operation with predefined parameters - Choose between fast classical segmentation or more powerful AI-models: use AI models trained with the ZEN Toolkit AI or DNNs trained on apeer with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of Z Zeiss Python. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification

Recover

Item no.: 410136-0174-370

ZEN Toolkit Molecular Quantification

Item Number: 410136-0174-370

ZEN Toolkit Molecular Quantification Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color-coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either a tall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution

Recover

Item no.: 410136-0173-370

ZEN Toolkit Deconvolution

Item Number: 410136-0173-370

ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox

Recover

Item no.: 410136-0126-370

ZEN Module EM Image Processing Toolbox

Item Number: 410136-0126-370

ZEN Module EM Image Processing Toolbox Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. If the PC system is equipped with a NVIDIA GPU it is possible to use the GPU-version for the "Remove Stripes" image processing function and speedup the processing time. It is recommended to use at least a workstation with a NVIDIA GPU with at least 4 GB of memory (and install latest Nvidia drivers).

Item has been added to the configuration

ZEN Module Correlative Array Tomography (CAT)

Recover

Item no.: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT)

Item Number: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT) Module for automated image acquisition of ultrathin sections in widefield microscopes. The software module includes image acquisition, the Z-stack alignment and the correlation of the Z-stacks. - Wizard-based workflow solution - Precise correlative calibration in widefield microscopes - Hierarchical image acquisition using the full range of magnification - Definition and imaging of regions of interest and even imaging of complete sections - Automated large area imaging - 3D reconstruction of 3D datasets (Z-stacks) - Registration of correlative 3D datasets - Using the full potential of the ZEN imaging software on the light microscope - Can be used as a non-correlative array tomography module

Item has been added to the configuration

ZEN Module Confocal Topography

Recover

Item no.: 410136-0038-370

ZEN Module Confocal Topography

Item Number: 410136-0038-370

ZEN Module Confocal Topography Module for analysis of surface data and visualisation of measument results.

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI 1 year license

Recover

Item no.: 410136-3169-380

ZEN Toolkit AI 1 year license

Item Number: 410136-3169-380

ZEN Toolkit AI 1 year license Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. License validity period: 1 year from date of activation

Item has been added to the configuration

ZEN Toolkit AI Floating License

Recover

Item no.: 410136-2169-380

ZEN Toolkit AI Floating License

Item Number: 410136-2169-380

ZEN Toolkit AI Floating License Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN andZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative toan own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. The floating license allows the flexible use of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer

Recover

Item no.: 410136-0171-360

ZEN Toolkit Developer

Item Number: 410136-0171-360

ZEN Toolkit Developer Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated workflows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core)

Item has been added to the configuration

ZEN Toolkit AI

Recover

Item no.: 410136-0169-380

ZEN Toolkit AI

Item Number: 410136-0169-380

ZEN Toolkit AI Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services.

Item has been added to the configuration

ZEN Toolkit GxP

Recover

Item no.: 410136-0163-350

ZEN Toolkit GxP

Item Number: 410136-0163-350

ZEN Toolkit GxP The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process.

ZEN tools

Item has been added to the configuration

ZEN Module Macro Environment

Recover

Item no.: 410136-1002-120

ZEN Module Macro Environment

Item Number: 410136-1002-120

ZEN Module Macro Environment Integrated Development Environment (IDE) with editor, debugger and recorder*. Enables intermediate Users to customize and automate ZEN for their needs with a selected set of commands. The Macro Interface in combination with the Python language allows users to generate simple Macro Code as well as Macros with loops and branches. Experts can extend the functionality by including additional libraries. Needed for remote control of ZEN via TCP/IP* and COM*. (*not ZEN core)

ZEN drivers

Item has been added to the configuration

ZEN Toolkit Peripheral Device Drivers

Recover

Item no.: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers

Item Number: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers Contains drivers for the following devices: Software Driver Uniblitz Driver for control of Uniblitz controllers VCM-D1, VMM-D1. Control of the Uniblitz shutter ("open"/ "closed"). Software Driver Ludl XY Stage Control Driver for the X-, Y-axis of the Ludl XY stage controller. The following types are supported: MAC 5000 XY, MAC 6000 XY. Software Driver Ludl Filterwheel/Shutter Driver for positioning of filters and control of the shutters. Up to 4 filter wheels and 6 shutters simultaneously. Supported controllers: MAC 5000, MAC 6000. Software Driver Sutter DG-4/Filter/Shutter Driver for positioning of the filter wheel and controlling of the shutter via software directly. Supports the Sutter controller Lambda10- 3, Lambda 10-2 and the light sources DG-4 and DG-4 Plus. SW Driver ASI Stage DC with attachment Z Piezo Driver for control of scanning stage XY DC 100x100 with attachment Z Piezo and scanning stage XY DC 110x90 with attachment Z Piezo / Rot.En. Software Driver PIFOC / Prior Driver for control of piezo objective focus unit and stage attachment Z- PIEZO.

Item has been added to the configuration

ZEN SW Driver Linkam Cryo Stage

Recover

Item no.: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage

Item Number: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage - Control of motorized x-, y-axis of CMS196M - Readout and storage of the temperature values in the image - Asynchronous temperature log

Item has been added to the configuration

ZEN Software Driver PCO

Recover

Item no.: 410136-0060-370

ZEN Software Driver PCO

Item Number: 410136-0060-370

ZEN Software Driver PCO Driver for the use of pco.edge cameras edge 5.5 CL, edge 4.2 CL/USB3.0, edge CLHS, edge 4.2 bi

Item has been added to the configuration

ZEN Software Driver Hitachi Camera

Recover

Item no.: 410136-0057-370

ZEN Software Driver Hitachi Camera

Item Number: 410136-0057-370

ZEN Software Driver Hitachi Camera Driver for the operation of the Hitachi camera HV-F202SCL

Item has been added to the configuration

ZEN Software Driver Roper PVCAM

Recover

Item no.: 410136-0046-370

ZEN Software Driver Roper PVCAM

Item Number: 410136-0046-370

ZEN Software Driver Roper PVCAM Driver for the use of Roper/Photometrics/QImaging b/w cameras Evolve 512, Evolve 512 Delta, Prime 95B, Prime BSI, Prime B 22mm

Item has been added to the configuration

ZEN Software Driver Hamamatsu Cameras

Recover

Item no.: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras

Item Number: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras Driver for the use of Hamamatsu b/w cameras Orca Flash 4.0 V3 CL/USB3.0, Orca Flash LT USB3.0, Image EM X2 512, Image EM X2-1K, Orca Fusion

Item has been added to the configuration

ZEN Software Driver Linkam

Recover

Item no.: 410136-0044-350

ZEN Software Driver Linkam

Item Number: 410136-0044-350

ZEN Software Driver Linkam Module to control Linkam Single-Element Heating/Freezing Stages and Vacuum option - Setup of temperature curves with individually defined temperature ramps - Acquisition of time series or temperature series - 5-point temperature calibration - Automatic logging and graphic representation of temperature- and vacuum data - Simultaneous presentation of temperature curve and temperature/time series - T95/T96-LinkPad and PE95/PE96-LinkPad controller supported

Item has been added to the configuration

ZEN desk (network license)

Recover

Item no.: 410135-2004-370

ZEN desk (network license)

Item Number: 410135-2004-370

ZEN desk (network license) ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

Virtual Slide Box

Recover

Item no.: 410135-0047-370

Virtual Slide Box

Item Number: 410135-0047-370

Virtual Slide Box E-learning package for virtual slides in Education. Packages offers digitalization for 20 slides and a solution for storage and sharing of virtual slides. Virtual slides can be accessed by students remotely with free of charge ZEISS Explorer app. Package includes the following services and software packages: - ZEN Data Storage as storage solution for the digitized slides - ZEN Data Explorer for remote access to stored slides via browser or iOS/Android app - Free of charge scanning service of 20 slides (with cover glass, brightfield only). Please use the ZMCC Demo Request Form in preparation of the scanning of the slides. The price includes installation and setup of the ZEN Data Storage server via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required),32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone® 6s or newer; Ipad® 5 or newer (Mini versions not supported); iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome88.0.4324.104 (64-bit) Windows: Browser: Google Chrome 78.0.3904.108 Apple® iPad Pro® iPhone® are registered trademarks of Apple Inc.

ZEN core base software

Item has been added to the configuration

ZEN analyzer 3.9 Floating License

Recover

Item no.: 410135-2035-390

ZEN analyzer 3.9 Floating License

Item Number: 410135-2035-390

ZEN analyzer 3.9 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.8 Floating License

Recover

Item no.: 410135-2035-380

ZEN analyzer 3.8 Floating License

Item Number: 410135-2035-380

ZEN analyzer 3.8 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.9

Recover

Item no.: 410135-0035-390

ZEN analyzer 3.9

Item Number: 410135-0035-390

ZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)amma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.8

Recover

Item no.: 410135-0035-380

ZEN analyzer 3.8

Item Number: 410135-0035-380

ZEN analyzer 3.8 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN core 3.9

Recover

Item no.: 410135-0011-390

ZEN core 3.9

Item Number: 410135-0011-390

ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN core 3.8

Recover

Item no.: 410135-0011-380

ZEN core 3.8

Item Number: 410135-0011-380

ZEN core 3.8 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Smartproof 5 and Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components. - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

arivis Vision4D software for image processing

Item has been added to the configuration

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Recover

Item no.: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Item Number: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN Desk 3.8 and arivis pro TL package (D)

Recover

Item no.: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package (D)

Item Number: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package Combined package of a ZEN desk base software and a two-year temporary license of arivis pro for 3D image visualization and data analysis to help researchers getting started with their image analysis. ZEN Desk: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. This arivis pro (TL) temporary license is valid for two years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact support-zeiss@arivis.com) with regular SW updates. The arivis pro (TL) package can only be sold together with a new microscopy system. After two years this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time (contact sales-zeiss@arivis.com).

arivis Software

Item has been added to the configuration

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Packing and dust protection (2)

Dust covers

Item has been added to the configuration

Dust cover for Axio Imager Vario

Recover

Item no.: 459336-0000-000

Dust cover for Axio Imager Vario

Item Number: 459336-0000-000

Dust cover for Axio Imager Vario (L770xB550xH550 mm)

Item has been added to the configuration

Protection cap set

Recover

Item no.: 434302-0000-000

Protection cap set

Item Number: 434302-0000-000

Protection cap set consisting of eyepiece cover and protection cap for luminous-field diaphragm optics

Computer and accessories (1)

Accessories for the computer

Item has been added to the configuration

Desk for microscopes and accessories 1200x800 mm (O)

Recover

Item no.: 000000-0465-514

Desk for microscopes and accessories 1200x800 mm (O)

Item Number: 000000-0465-514

Desk for microscopes and accessories 1200x800 mm (O) max. loading capacity 150 kg

Purchased parts for the LSFM (1)

Computer and accessories

Item has been added to the configuration

PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)

Recover

Item no.: 430039-9021-000

PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)

Item Number: 430039-9021-000

PC Interface Microscope and Trigger for Celldiscoverer 7 (D) Trigger board for TTL trigger output and analysis. with precise trigger control of Celldiscoverer 7, LSM and up to two triggerable cameras.

Microscope Axio Imager.Z2 Vario for reflected-light bright field/dark field and DIC.