Binocular microscope Axiolab 5 for Microbiology TL and FL

Microscope stand Axiolab 5, TL/FL, 3 channels FL-LED mount, 5x H encoded mechanical stage 75x30 R - FL-LED reflected-light illumination with 3-position mount for LED modules and 4-position reflector turret for P <(>&<)> C modules, coded - Z-drive with fine drive knob left and fine drive disk right, flat with scale - 15 mm focus lift - nosepiece 5x brightfield, M27 encoded - stage and condenser carrier - mechanical stage 75x30 R with hardcoat anodized surface, 210 x 145 mm stage plate, covered X-guide positioned at bottom, right drive 135 mm (extendable by 15 mm) with friction setting - specimen holder for one-hand operation, spring lever left - transmitted-light illumination with white LED 10W, optional for halogen reflector lamp 12V 35W - Auto. mechanical shutter in TL for fluorescence mode - integrated 24V DC 60W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - Snap button supports ZEISS Axiocam - USB 2.0 to PC - dust cover - filter holder in TL

Antiglare screen

LED module 470 nm with excitation filter BP469/38 and ACR chip Blue (470 nm) for excitation of eGFP, Fluo4, FITC and similar dyes average LED lifetime > 60000 hrs.

Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N

Filter Set 38 HE with Reflector Module FL EC P&C (E) Filter Set 38 HE shift free consisting of filters EX BP 470/40, BS FT 495, EM BP 525/50 inserted in reflector module, reflection avoided through tilted mount for emission filters

Camera Adapter 60N-C 2/3" 0.5x

Eyepiece PL 10x/22 Br. foc.

Eyepiece eyecup

Objective N-Achroplan 10x/0.25 M27 (FWD=6.5mm)

Objective N-Achroplan 40x/0.65 M27 (FWD=0.60mm)

Objective N-Achroplan 50x/1.0 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Condenser, achromatic-aplanatic 0.9 H D Ph DIC with front lens switchable on the left and right. 5-position modulator disk. 4 centerable positions with Ph1, Ph2, Ph3 and dark-field stop 0.75. 1 bright-field position with aperture stop. Alternative use of up to 4 DIC prisms / slit-diaphragms PlasDIC possible instead of the Ph/D stops. For objectives 1.0-100x, WD=1.0mm

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.