ZEISS Shop
Stereomicroscopes
SteREO Discovery
SteREO Discovery.V12
Stereomicroscope SteREO Discovery.V12

SteREO Discovery.V12

Stereomicroscope SteREO Discovery.V12

Item no.: 495007-0004-000 (individual configuration)

Description

Stereomicroscope SteREO Discovery.V12 with focus motor and without illumination

Full description

Stereomicroscope SteREO Discovery.V12

Item Number: 495007-0004-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Measurement Software

0 added 0 removed

License software

0 added 0 removed

Stand accessories

0 added 0 removed

Bulbs

0 added 0 removed

Stages and accessories

0 added 0 removed

Tubes and accessories

0 added 0 removed

Filters

0 added 0 removed

Photomicrography

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Stereomicroscopes

0 added 0 removed

SteREO Discovery.V12 microscope body

Recover

Item no.: 435001-9901-000

SteREO Discovery.V12 microscope body

Item Number: 435001-9901-000

Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required
Human Interface Panel HIP

Recover

Item no.: 435601-0000-000

Human Interface Panel HIP

Item Number: 435601-0000-000

Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS
Binocular ergo phototube S 5-45°

Recover

Item no.: 435100-0000-000

Binocular ergo phototube S 5-45°

Item Number: 435100-0000-000

Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N
Objective Plan S 1.0x FWD 81 mm

Recover

Item no.: 435200-0000-000

Objective Plan S 1.0x FWD 81 mm

Item Number: 435200-0000-000

Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)
Intermediate tube S, fixed 40 mm

Recover

Item no.: 435102-0000-000

Intermediate tube S, fixed 40 mm

Item Number: 435102-0000-000

Intermediate tube S, fixed 40 mm to increase the viewing height
Mount S with diam. 76 mm support

Recover

Item no.: 435402-0000-000

Mount S with diam. 76 mm support

Item Number: 435402-0000-000

Mount S with diam. 76 mm support
Stand base 450

Recover

Item no.: 435430-9903-000

Stand base 450

Item Number: 435430-9903-000

Stand base 450 WxDxH 449x346x30mm stand base with 3x M8 threaded holes, insert plate 450 and b/w plate D=120mm; compatible with column S 490/800 mm or T column 350mm and with transmitted light unit 450 or 450 mot or VisiLED transmitted light; stage d=84mm needs adapter 84/120 (435430-9010) additionally
Motor focus 3 with column S 490mm

Recover

Item no.: 435403-9001-000

Motor focus 3 with column S 490mm

Item Number: 435403-9001-000

Motor focus 3 with column S 490mm - Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450

Connecting cables

0 added 0 removed

Control devices

0 added 0 removed

Image processing

0 added 0 removed

Dust protection Set M

Recover

Item no.: 434303-0000-000

Dust protection Set M

Item Number: 434303-0000-000

Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Stereomicroscope SteREO Discovery.V12
Item Number: 495007-0004-000 (individual configuration)
Measurement Software (2)

NEO Software

Item has been added to the configuration

NEO pixel, BasLic, PC

Recover

Item no.: 662002-0206-006

NEO pixel, BasLic, PC

Item Number: 662002-0206-006

NEO pixel, BasLic, PC - basic license for software in current version - PC-bound license - measurement data obtained from image data Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click & Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

NEO q-das out, BasLic, PC

Recover

Item no.: 662002-0206-002

NEO q-das out, BasLic, PC

Item Number: 662002-0206-002

NEO q-das out, BasLic, PC for NEO insights and NEO select - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

License software (4)

NEO

Item has been added to the configuration

ZAPHIRE autocad in, BasLic, PC

Recover

Item no.: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC

Item Number: 662002-0302-103

ZAPHIRE autocad in, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for import of CAD data im dxf- and dwg format

Item has been added to the configuration

ZAPHIRE PiWeb reporting plus, BasLic, PC

Recover

Item no.: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC

Item Number: 662002-0302-011

ZAPHIRE PiWeb reporting plus, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software option for statistical evaluations with graphical display of results - simulataneous measuring and data evaluation - evaluations of up to 1000 measurement processes per inspection plan - investivations of measuring tool capability - additional protocol templates

Item has been added to the configuration

ZAPHIRE offline evaluation, BasLic, PC

Recover

Item no.: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC

Item Number: 662002-0302-006

ZAPHIRE offline evaluation, BasLic, PC for ZEISS microscopes - basic license for software in current version - PC-bound license - measurement data obtained from image data in CZI format Software for evaluation and visualization of measurement data - inspection feature oriented programming methodology by inspection feature concept - automatic recognition of elements - interactive programming via Click and Pick - incl. PiWeb reporting for efficient protocol creation using pre-defined protocol templates

Item has been added to the configuration

ZAPHIRE q-das out, BasLic, PC

Recover

Item no.: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC

Item Number: 662002-0302-002

ZAPHIRE q-das out, BasLic, PC for O-SELECT, O-DETECT - basic license for software in current version - PC-bound license Software interface for export of measurement results in transfer format Q-DAS

Stand accessories (1)

Various stand accessories

Item has been added to the configuration

Table-top base for MARC

Recover

Item no.: 435604-9010-000

Table-top base for MARC

Item Number: 435604-9010-000

Table-top base for MARC to accept Coaxial MARC, allows positioning on the desk as required; incl. cable CAN RJ45 1.0m

Reflected-light illumination (2)

Reflector slider for Axioskop 1

Item has been added to the configuration

Beam splitter 50%, 26x36mm

Recover

Item no.: 446310-0002-000

Beam splitter 50%, 26x36mm

Item Number: 446310-0002-000

Beam splitter 50%, 26x36mm

Fluorescence protection devices

Item has been added to the configuration

Special eyecup with light protection for Primo Star

Recover

Item no.: 415500-1819-000

Special eyecup with light protection for Primo Star

Item Number: 415500-1819-000

Special eyecup with light protection for Primo Star Also suited for eyepieces 10x/23 to Stemi 305, Stemi 508, SteREO Discovery and Axio Zoom - Set of two different eyecups (left/right) - To minimize disturbing light incidence - Not foldable, usable without eyeglasses only

Lamps and Lamp housings (45)

Cold-light sources

Item has been added to the configuration

Illuminator HXP 200C (D)

Recover

Item no.: 435716-0000-000

Illuminator HXP 200C (D)

Item Number: 435716-0000-000

Illuminator HXP 200C (D) inclusive built-in power supply 310W, lamp module, infrared filter, CAN-BUS cable and country-specific mains cord. Fluorescence light source with integrated shutter with trigger capability (5V TTL), that works stepper motor controlled, fast and vibration free. With CAN interface for remote control of the shutter

Item has been added to the configuration

Cold light source CL 1500 HAL

Recover

Item no.: 435710-9000-000

Cold light source CL 1500 HAL

Item Number: 435710-9000-000

Cold light source CL 1500 HAL - up to 600lm light flux at 9mm optical output dia., continuous electronically dimming, - LCD display for brightness in % or color temperature in K or power-on hours, - incl. bulb 15V 150W halogen reflector, lifetime ca. 150h at 80%=450lm, - 10mm clamping nut with sensor for light guide 1500, - filter slider for one filter d=28mm and with free opening, - max. 180W wide-range supply for flicker free light, silent axial fan, - country-specific mains cord

Item has been added to the configuration

Cold-light source CL 6000 LED (D)

Recover

Item no.: 435700-9101-000

Cold-light source CL 6000 LED (D)

Item Number: 435700-9101-000

Cold-light source CL 6000 LED (D) - up to 600 lm light flux at 9 mm fiber output dia., ca. 6200K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35x26x4 mm and with free opening - max. 70W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S, USB socket - country-specific mains cord - Dimensions D241xW192xH118 mm, weight 3.1 kg

Item has been added to the configuration

Cold-light source CL 9000 LED CAN (D)

Recover

Item no.: 435700-9000-000

Cold-light source CL 9000 LED CAN (D)

Item Number: 435700-9000-000

Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg

Item has been added to the configuration

Slit-ring illuminator 1500 ECO d=66 mm, 9/2000 mm (D)

Recover

Item no.: 435540-9006-000

Slit-ring illuminator 1500 ECO d=66 mm, 9/2000 mm (D)

Item Number: 435540-9006-000

Slit-ring illuminator 1500 ECO d=66 mm, 9/2000 mm (D)

Item has been added to the configuration

Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)

Recover

Item no.: 435540-9005-000

Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)

Item Number: 435540-9005-000

Slit-ring illuminator 1500 ECO, d=66 mm, 9/1000 mm (D)

Item has been added to the configuration

Flexible light guide 1500 ECO, 2x 4.5/1000 mm (D)

Recover

Item no.: 435540-9002-000

Flexible light guide 1500 ECO, 2x 4.5/1000 mm (D)

Item Number: 435540-9002-000

Flexible light guide 1500 ECO, 2x 4.5/1000 mm (D)

Item has been added to the configuration

Controller K LED

Recover

Item no.: 435525-9200-000

Controller K LED

Item Number: 435525-9200-000

Controller K LED - For on/off switching and dimming of illuminator K LED - For power supply of Stemi 305 cam, if no stand K EDU/LAB/MAT or stand M LED is used - Magnetic plate for mounting to boom stands - Plug-in power unit 12V DC 24W/100...240V AC/50...60Hz incl. mains input plug EU, GB, US/JP, AU and country-specific power cable EURO C8 for other countries - RJ12 cable 1 m for illuminator K LED

Item has been added to the configuration

Clamp S to light guide (D)

Recover

Item no.: 435442-0000-000

Clamp S to light guide (D)

Item Number: 435442-0000-000

Clamp S to light guide (D)

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

Item has been added to the configuration

Illumination Unit X-Cite Xylis (D)

Recover

Item no.: 423006-9000-000

Illumination Unit X-Cite Xylis (D)

Item Number: 423006-9000-000

Illumination Unit X-Cite Xylis (D) LED-based white light source for fluorescence excitation Wavelength Range: 380-770 nm LED Peaks (nm): 385, 430, 475, 545, 650, 735 Control Options: speedDIAL (manual control), TTL on/off, USB LEDon/off response Times: 100 μs TTL / 1 ms USB Incl. 3 mm liquid light guide

Item has been added to the configuration

Holder d=66 mm to VisiLED DF (D)

Recover

Item no.: 417095-9510-000

Holder d=66 mm to VisiLED DF (D)

Item Number: 417095-9510-000

Holder d=66 mm to VisiLED DF (D)

Item has been added to the configuration

Controller MC 1100 for VisiLED (D)

Recover

Item no.: 417095-9041-000

Controller MC 1100 for VisiLED (D)

Item Number: 417095-9041-000

Controller MC 1100 for VisiLED (D) with 3 rotating knobs for dimming, segmentation (5 modes) and its rotation, for control of one VisiLED illuminator

Item has been added to the configuration

Focusing attachment d=10 mm (D)

Recover

Item no.: 417089-0000-000

Focusing attachment d=10 mm (D)

Item Number: 417089-0000-000

Focusing attachment d=10 mm (D)

Item has been added to the configuration

Light guide holder for Stemi mounts (D)

Recover

Item no.: 417085-9002-000

Light guide holder for Stemi mounts (D)

Item Number: 417085-9002-000

Light guide holder for Stemi mounts (D)

Item has been added to the configuration

Flexible light guide 200, 4.5/600 mm (D)

Recover

Item no.: 417085-9001-000

Flexible light guide 200, 4.5/600 mm (D)

Item Number: 417085-9001-000

Flexible light guide 200, 4.5/600 mm (D)

Item has been added to the configuration

Halogen-light filter for focusing attachment d=6 mm (D)

Recover

Item no.: 417084-9020-000

Halogen-light filter for focusing attachment d=6 mm (D)

Item Number: 417084-9020-000

Halogen-light filter for focusing attachment d=6 mm (D)

Item has been added to the configuration

Cold-light source KL 300 LED for column 32 (D)

Recover

Item no.: 417084-9000-000

Cold-light source KL 300 LED for column 32 (D)

Item Number: 417084-9000-000

Cold-light source KL 300 LED for column 32 (D) - up to 75lm light flux, ca. 5,600K color temperature - ca. 50,000 operating hours until intensity drop to 70% - attachment adapter with clamping ring 32 and M8 hole on both sides - incl. Plug-in supply 9 V DC 5 VA with 1.7m cable and EU, GB, US/JP, AU plug adapters

Item has been added to the configuration

Slit-ring illuminator 1500 for incident-light dark field, d=66 mm (D)

Recover

Item no.: 417075-9011-000

Slit-ring illuminator 1500 for incident-light dark field, d=66 mm (D)

Item Number: 417075-9011-000

Slit-ring illuminator 1500 for incident-light dark field, d=66 mm (D) - flexible light guide 1500, 9/1000 mm - free working distance 5...15 mm

Item has been added to the configuration

Flexible light guide, 2 branches 4.5/1000 mm (D)

Recover

Item no.: 417075-9004-000

Flexible light guide, 2 branches 4.5/1000 mm (D)

Item Number: 417075-9004-000

Flexible light guide, 2 branches 4.5/1000 mm (D) for KL 1500 / 2500

Item has been added to the configuration

Flexible light guide 1500, 2x 5.6/1000 mm (D)

Recover

Item no.: 417072-0000-000

Flexible light guide 1500, 2x 5.6/1000 mm (D)

Item Number: 417072-0000-000

Flexible light guide 1500, 2x 5.6/1000 mm (D)

Item has been added to the configuration

Polarizer for focusing attachment d=6 mm (D)

Recover

Item no.: 417065-0000-000

Polarizer for focusing attachment d=6 mm (D)

Item Number: 417065-0000-000

Polarizer for focusing attachment d=6 mm (D) for 435540-9003 or 417060-9901 or 417059-9901

Item has been added to the configuration

Flexible light guide 1500, 8/1000 mm (D)

Recover

Item no.: 417063-9901-000

Flexible light guide 1500, 8/1000 mm (D)

Item Number: 417063-9901-000

Flexible light guide 1500, 8/1000 mm (D)

Item has been added to the configuration

Focusing attachment and filter set (D)

Recover

Item no.: 417060-9901-000

Focusing attachment and filter set (D)

Item Number: 417060-9901-000

Focusing attachment and filter set (D) - with blue, red, green, yellow color filter

Item has been added to the configuration

Goose-neck light guide 1500, 4.5/600 mm (D)

Recover

Item no.: 417052-9901-000

Goose-neck light guide 1500, 4.5/600 mm (D)

Item Number: 417052-9901-000

Goose-neck light guide 1500, 4.5/600 mm (D)

Item has been added to the configuration

Conversion filter, d=28 mm (D)

Recover

Item no.: 000000-1063-317

Conversion filter, d=28 mm (D)

Item Number: 000000-1063-317

Conversion filter, d=28 mm (D)

Item has been added to the configuration

Line light S, l=50 mm (D)

Recover

Item no.: 000000-1063-307

Line light S, l=50 mm (D)

Item Number: 000000-1063-307

Line light S, l=50 mm (D)

Various lamp accessories

Item has been added to the configuration

Halogen Light Filter CL 4500 LED (D)

Recover

Item no.: 435700-9219-000

Halogen Light Filter CL 4500 LED (D)

Item Number: 435700-9219-000

Halogen Light Filter CL 4500 LED (D)

Item has been added to the configuration

Neutral Filter 0.25 CL LED (D)

Recover

Item no.: 435700-9026-000

Neutral Filter 0.25 CL LED (D)

Item Number: 435700-9026-000

Neutral Filter 0.25 CL LED (D)

Item has been added to the configuration

Red filter for CL LED (D)

Recover

Item no.: 435700-9025-000

Red filter for CL LED (D)

Item Number: 435700-9025-000

Red filter for CL LED (D)

Item has been added to the configuration

Yellow filter for CL LED (D)

Recover

Item no.: 435700-9024-000

Yellow filter for CL LED (D)

Item Number: 435700-9024-000

Yellow filter for CL LED (D)

Item has been added to the configuration

Green filter for CL LED (D)

Recover

Item no.: 435700-9023-000

Green filter for CL LED (D)

Item Number: 435700-9023-000

Green filter for CL LED (D)

Item has been added to the configuration

Blue filter for CL LED (D)

Recover

Item no.: 435700-9022-000

Blue filter for CL LED (D)

Item Number: 435700-9022-000

Blue filter for CL LED (D)

Item has been added to the configuration

Day Light Filter CL LED (D)

Recover

Item no.: 435700-9021-000

Day Light Filter CL LED (D)

Item Number: 435700-9021-000

Day Light Filter CL LED (D)

Item has been added to the configuration

Halogen Light Filter CL LED (D)

Recover

Item no.: 435700-9020-000

Halogen Light Filter CL LED (D)

Item Number: 435700-9020-000

Halogen Light Filter CL LED (D)

Item has been added to the configuration

Light-conducting rod 51 mm (D)

Recover

Item no.: 435512-0000-000

Light-conducting rod 51 mm (D)

Item Number: 435512-0000-000

Light-conducting rod 51 mm (D) required with 435506 ring illuminator and Plan Apo Z 1.0x / Z 1.5x / S 1,5x or converter S 1.5x mono

Item has been added to the configuration

Light-conducting rod 13 mm (D)

Recover

Item no.: 435511-0000-000

Light-conducting rod 13 mm (D)

Item Number: 435511-0000-000

Light-conducting rod 13 mm (D) required with 435506 ring illuminator and Plan Apo Z 0.5x / S 1.0x / S 3.5x mono or Achromat S 1.5x or PlanNeoFluar Z 1.0x, to that 2 light-conducting rods are required

Item has been added to the configuration

Slit-ring illuminator d=66 mm without light guide (D)

Recover

Item no.: 435506-0000-000

Slit-ring illuminator d=66 mm without light guide (D)

Item Number: 435506-0000-000

Slit-ring illuminator d=66 mm without light guide (D) useable with 417063-9901 light guide 8/1000mm and objective nosepiece S/doc 435302 or Z 435380-9000

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Item has been added to the configuration

Shutter remote control for HXP C

Recover

Item no.: 000000-0496-214

Shutter remote control for HXP C

Item Number: 000000-0496-214

Shutter remote control for HXP C incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

HBO/XBO lamp housing

Item has been added to the configuration

HBO 100 illuminator, self-adjusting with lamp mount and collector

Recover

Item no.: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector

Item Number: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector including heat-reflecting filter and 2m connection cable. Automatic lamp alignment

Item has been added to the configuration

HBO 100 illuminator with lamp mount and collector

Recover

Item no.: 423010-0000-000

HBO 100 illuminator with lamp mount and collector

Item Number: 423010-0000-000

HBO 100 illuminator with lamp mount and collector incl. heat-reflecting filter and 2m connection cable

Light guides

Item has been added to the configuration

Flexible light guide 1500, 5/1000mm (D)

Recover

Item no.: 417075-9100-000

Flexible light guide 1500, 5/1000mm (D)

Item Number: 417075-9100-000

Flexible light guide 1500, 5/1000mm (D)

Item has been added to the configuration

Gooseneck Light Guide 1500-90°, 2x 4.5/620 mm

Recover

Item no.: 417075-9040-000

Gooseneck Light Guide 1500-90°, 2x 4.5/620 mm

Item Number: 417075-9040-000

Gooseneck Light Guide 1500-90°, 2x 4.5/620 mm

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (5)

Halogen lamps

Item has been added to the configuration

Bulb 15V 150W Halogen Reflector (D)

Recover

Item no.: 417053-0000-000

Bulb 15V 150W Halogen Reflector (D)

Item Number: 417053-0000-000

Bulb 15V 150W Halogen Reflector (D)

Item has been added to the configuration

Halogen lamp 24V 250W (D)

Recover

Item no.: 000000-0300-271

Halogen lamp 24V 250W (D)

Item Number: 000000-0300-271

Bulb 24V 250W Halogen Reflector (D)

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 103 W/2 (F)

Recover

Item no.: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item Number: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item has been added to the configuration

Lamp HXP 200, spare (D)

Recover

Item no.: 000000-0525-316

Lamp HXP 200, spare (D)

Item Number: 000000-0525-316

Lamp HXP 200, spare (D) average lifetime 2000h

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (3)

Various electrical accessories

Item has been added to the configuration

Converter CAN - USB Rev.2 (D)

Recover

Item no.: 432909-9901-000

Converter CAN - USB Rev.2 (D)

Item Number: 432909-9901-000

Converter CAN - USB Rev.2 (D) Interface for components with CAN to USB PC Sockets: 1x CAN, 1x USB, 24 V Included accessories: power supply 100 - 240 V with country specific plug, USB cable

Ballasts

Item has been added to the configuration

Control panel with LCD display for FluoArc

Recover

Item no.: 432905-0000-000

Control panel with LCD display for FluoArc

Item Number: 432905-0000-000

Control panel with LCD display for FluoArc

Item has been added to the configuration

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Recover

Item no.: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Item Number: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA with resettable hour meter at the front

Stages and accessories (38)

Various stage accessories

Item has been added to the configuration

Glass plate d=72 mm for specimen stages

Recover

Item no.: 473378-0000-000

Glass plate d=72 mm for specimen stages

Item Number: 473378-0000-000

Glass plate d=72 mm for specimen stages

Item has been added to the configuration

Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Item has been added to the configuration

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D) compatible to STEM detector and air lock 80 mm

Item has been added to the configuration

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Recover

Item no.: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Item Number: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D) compatible to air lock 80 mm

Item has been added to the configuration

Calibration Marker CorrMic (Stub), 3 pc. (D)

Recover

Item no.: 432335-9191-000

Calibration Marker CorrMic (Stub), 3 pc. (D)

Item Number: 432335-9191-000

Calibration Marker CorrMic (Stub), 3 pc. (D) Set of 3 markers to define coordinate system for Correlative Microscopy. Consisting of: - 3 stubs with calibration marker - 3 extensions for stubs - 2 pin keys - Tool for height adjustment of markers - Instructions for creation of custom sample holders

Specimen holders

Item has been added to the configuration

Stage clip

Recover

Item no.: 473371-9902-000

Stage clip

Item Number: 473371-9902-000

Stage clip

Item has been added to the configuration

Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D) - dimension 76 mm x 26 mm - mounting for 4 TEM Grids, d=3.05 mm - 3 calibration reference points Not compatible with EVO STEM-detector.

Item has been added to the configuration

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Recover

Item no.: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Item Number: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D) - dimension 76 mm x 26 mm - mounting for cover glasses 22 mm x 22 mm - 3 calibration reference points - incl. cover glasses high performance, D=0.17mm, 22 x 22 mm, box with 200 pc.

Item has been added to the configuration

Specimen holder CorrMic MAT for Geo Slides (D)

Recover

Item no.: 432335-9220-000

Specimen holder CorrMic MAT for Geo Slides (D)

Item Number: 432335-9220-000

Specimen holder CorrMic MAT for Geo Slides (D) - suitable for Geo slides within the following dimensions: 46...48 mm x 26...28 mm x 1.0...1.6 mm - 3 calibration reference markers on holder to define coordinate system for Correlative Microscopy - incl. SEM adapter - compatible with airlock 80 mm - outer dimensions 75.5 mm x 51.5 mm x 1.3 mm (W x D x H)

Item has been added to the configuration

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D)

Recover

Item no.: 432335-9210-000

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D)

Item Number: 432335-9210-000

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D) with orientation

Item has been added to the configuration

Adapter plate CorrMic with SEM interface; 160x116 (D)

Recover

Item no.: 432335-9181-000

Adapter plate CorrMic with SEM interface; 160x116 (D)

Item Number: 432335-9181-000

Adapter plate CorrMic with SEM interface; 160x116 (D) - for mounting of specimen holders CorrMic MAT with SEM adapter - plate size 160x116

Item has been added to the configuration

Adapter plate CorrMic with SEM interface; 96x86 (D)

Recover

Item no.: 432335-9170-000

Adapter plate CorrMic with SEM interface; 96x86 (D)

Item Number: 432335-9170-000

Adapter plate CorrMic with SEM interface; 96x86 (D) - for mounting of specimen holders CorrMic MAT with SEM adapter - usable in mounting frames CorrMic MAT; 96x86

Item has been added to the configuration

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Recover

Item no.: 432335-9160-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Item Number: 432335-9160-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D) and mechanical stage 75x50 mot

Item has been added to the configuration

Specimen holder CorrMic MAT for Particle Analysis; 50 mm (D)

Recover

Item no.: 432335-9131-000

Specimen holder CorrMic MAT for Particle Analysis; 50 mm (D)

Item Number: 432335-9131-000

Specimen holder CorrMic MAT for Particle Analysis; 50 mm (D) - clamping mechanism for filter diameter 50 mm - max. scan diameter: 40 mm - filter mount without cover glas - 3 calibration reference markers on holder to define coordinate system for Correlative Microscopy - stamping tool for marking filters for orientated filter installation - with SEM adapter - compatible with airlock 80 mm

Item has been added to the configuration

Specimen holder CorrMic MAT for flat samples / stubs (D)

Recover

Item no.: 432335-9121-000

Specimen holder CorrMic MAT for flat samples / stubs (D)

Item Number: 432335-9121-000

Specimen holder CorrMic MAT for flat samples / stubs (D) - 4 height adjustable spring clips for fixation of various specimens - maximum specimen size 2.5" x 3" (6 cm x 7,5 cm) - mount for 4 SEM stubs with 1/8" pin - 3 calibration reference markers on holder to define coordinate system for Correlative Microscopy - dimension 78 mm x 78 mm - with SEM adapter - incl. SEM stubs with 1/2" surface and 1/8" pin, 10 pc. - compatible with airlock 80 mm

Item has been added to the configuration

Specimen holder CorrMic MAT for Particle Analysis; 47 mm (D)

Recover

Item no.: 432335-9111-000

Specimen holder CorrMic MAT for Particle Analysis; 47 mm (D)

Item Number: 432335-9111-000

Specimen holder CorrMic MAT for Particle Analysis; 47 mm (D) - clamping mechanism for filter diameter 47 mm - max. scan diameter: 37 mm - filter mount without cover glas - 3 calibration reference markers on holder to define coordinate system for Correlative Microscopy - stamping tool for marking filters for orientated filter installation - with SEM adapter - compatible with airlock 80 mm

Item has been added to the configuration

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Recover

Item no.: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Item Number: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage

Item has been added to the configuration

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Recover

Item no.: 432335-9080-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D)

Item Number: 432335-9080-000

Mounting frame for Specimen holder CorrMic MAT; 96x86 (D) - frame size 160x116

Item has been added to the configuration

Stage insert 160x116mm with holder for 4" wafer, rotatable (D)

Recover

Item no.: 432322-9010-000

Stage insert 160x116mm with holder for 4" wafer, rotatable (D)

Item Number: 432322-9010-000

Stage insert 160x116mm with holder for 4" wafer, rotatable (D) for mechanical stages 105x105/85mm

Item has been added to the configuration

Mounting frame for steel specimen (D)

Recover

Item no.: 432322-9000-000

Mounting frame for steel specimen (D)

Item Number: 432322-9000-000

Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm

Item has been added to the configuration

Mounting frame for holder of round particle filters

Recover

Item no.: 432321-9901-000

Mounting frame for holder of round particle filters

Item Number: 432321-9901-000

Mounting frame for holder of round particle filters - frame size 160x116

Item has been added to the configuration

Holder for round particle filters Rev. 2

Recover

Item no.: 432320-9901-000

Holder for round particle filters Rev. 2

Item Number: 432320-9901-000

Holder for round particle filters Rev. 2 - max. filter diameter 50 mm - max. scan diameter: 48 mm - reproducable positioning of filters on a motorised stage - glass plate with mounting ring for planar filter fixation - suitable for objectives up to LD Epiplan 20x/0.4 - positioning mark for 25 mm filters

Item has been added to the configuration

Mounting frame for two slides 76x26 (D)

Recover

Item no.: 432318-0000-000

Mounting frame for two slides 76x26 (D)

Item Number: 432318-0000-000

Mounting frame for two slides 76x26 (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for Terasaki plate (D)

Recover

Item no.: 432317-0000-000

Mounting frame for Terasaki plate (D)

Item Number: 432317-0000-000

Mounting frame for Terasaki plate (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for multiwell plates or ELISPOT HTS (D)

Recover

Item no.: 432316-0000-000

Mounting frame for multiwell plates or ELISPOT HTS (D)

Item Number: 432316-0000-000

Mounting frame for multiwell plates or ELISPOT HTS (D) - frame size 160x116 - for plate footprint 127x86 mm

Item has been added to the configuration

Mounting frame for 1 Geo Slide 48x28 mm (D)

Recover

Item no.: 432315-9000-000

Mounting frame for 1 Geo Slide 48x28 mm (D)

Item Number: 432315-9000-000

Mounting frame for 1 Geo Slide 48x28 mm (D) - frame size 160x116 mm

Item has been added to the configuration

Mounting frame for slide 76x26 (D)

Recover

Item no.: 432315-0000-000

Mounting frame for slide 76x26 (D)

Item Number: 432315-0000-000

Mounting frame for slide 76x26 (D) - frame size 160x116

Item has been added to the configuration

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D)

Recover

Item no.: 432314-0000-000

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D)

Item Number: 432314-0000-000

Mounting frame for 96 multiwell ELISPOT plates HA/IP (D) - frame size 160x116 - for plate footprint 105x71 mm

Item has been added to the configuration

Metal Insert Plate (D)

Recover

Item no.: 432313-0000-000

Metal Insert Plate (D)

Item Number: 432313-0000-000

Metal Insert Plate (D) plane plate, horizontally fine adjustable - frame size 160x116 - with grid lines

Item has been added to the configuration

Glass Insert Plate (D)

Recover

Item no.: 432312-0000-000

Glass Insert Plate (D)

Item Number: 432312-0000-000

Glass Insert Plate (D) - frame size 160x116

Item has been added to the configuration

Universal mounting frame for Petri dishes and slides

Recover

Item no.: 432311-9901-000

Universal mounting frame for Petri dishes and slides

Item Number: 432311-9901-000

Universal mounting frame for Petri dishes and slides for stages for the Axio Imager, Axio Scope and Axio Examiner

Item has been added to the configuration

Specimen holder, special, for 2 slides 76x26 mm

Recover

Item no.: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm

Item Number: 432303-0000-000

Specimen holder, special, for 2 slides 76x26 mm particularly for use with immersion objectives

Item has been added to the configuration

Universal mounting frame A-K (D)

Recover

Item no.: 410800-1000-000

Universal mounting frame A-K (D)

Item Number: 410800-1000-000

Universal mounting frame A-K (D) - frame size 160x116mm

Heating stages

Item has been added to the configuration

LNP96-S Cooling System (D)

Recover

Item no.: 000000-2269-144

LNP96-S Cooling System (D)

Item Number: 000000-2269-144

LNP96-S Cooling System (D) operates using un-pressurized liquid nitrogen - For heating- and freezing stages LTS420 and THMS600 - Stage cooling down to -196°C Consisting of: - LNP96-S automatic cooling pump - Dewar Flask (2 Litres) - Connection cable to T96-S System Controller, country specific power cord

Item has been added to the configuration

T96-S System Controller (D)

Recover

Item no.: 000000-2269-123

T96-S System Controller (D)

Item Number: 000000-2269-123

T96-S System Controller (D) - Supports Linkam heating/freezing stages LTS420, THMS600 and TS1500 - Temperature ramps of up to 200°C/min (dependant on stage attached). - Temperature measurement using a PT100 platinum Sensor with > 0.01°C resolution. - Standard USB interface allows the controller to be connected to a PC. Consisting of: - T96-S Controller - LinkPad - USB cable, country specific power cord

Item has been added to the configuration

Linkam Heating/Freezing Stage LTS420 (D)

Recover

Item no.: 000000-1510-342

Linkam Heating/Freezing Stage LTS420 (D)

Item Number: 000000-1510-342

Linkam Heating/Freezing Stage LTS420 (D) - Temperature range -196°C to 420°C - Sample holder for standard microscope slides 76x 26 mm and 15x15 mm travel range - Max. size for arbitrary samples 53.5x43 mm - Stage body size - 160x80x24 mm - Gas tight chamber for atmospheric control - Swing out lid for easy sample loading - Glass window 22 mm diameter; 0.17 mm thick - Temperature stability & accuracy < 0.1°C - Objective minimum working distance 6 mm - Condenser minimum working distance 13.2 mm Consisting of: - LTS420 stage with accessories - Tubes, connection cables

Item has been added to the configuration

Linkam Heating/Freezing Stage THMS600 (D)

Recover

Item no.: 000000-1510-302

Linkam Heating/Freezing Stage THMS600 (D)

Item Number: 000000-1510-302

Linkam Heating/Freezing Stage THMS600 (D) - Temperature range -196°C to 600°C - Max. sample size 22 mm diameter - Travel range 16x16 mm - Stage body size - 137x92x24 mm - Gas tight chamber for atmospheric control - Glass window 22 mm diameter; 0.17 mm thick - Temperature stability & accuracy < 0.1°C - Objective minimum working distance 4.5 mm - Condenser minimum working distance 12.5 mm Consisting of: - THMS600 stage with accessories - Tubes, connection cables

Item has been added to the configuration

Linkam WCP Water Circulation Pump (D)

Recover

Item no.: 000000-0680-105

Linkam WCP Water Circulation Pump (D)

Item Number: 000000-0680-105

Linkam WCP Water Circulation Pump (D) for Linkam's range of hot and high temperature stages and Peltier stages Requires T96-S System Controller for PC control Consisting of: Water circulation pump Tubes Dimensions: 360 x 80 x 180 (mm) Weight: 2.2kg (dry, excluding cables and power supply) Capacity Volume: 300 ml Tubing Length: 2x 100 cm External power supply: input: 100-240VAC, 1,0A, 50-60Hz output: 12V/DC, 2,5A, 30W Country specific mains cable

Tubes and accessories (6)

Various tube accessories

Item has been added to the configuration

Module 5.0x for magnification changer

Recover

Item no.: 426137-9050-000

Module 5.0x for magnification changer

Item Number: 426137-9050-000

Module 5.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 4.0x for magnification changer

Recover

Item no.: 426137-9040-000

Module 4.0x for magnification changer

Item Number: 426137-9040-000

Module 4.0x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 2.5x for magnification changer

Recover

Item no.: 426137-9030-000

Module 2.5x for magnification changer

Item Number: 426137-9030-000

Module 2.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 1.6x for magnification changer

Recover

Item no.: 426137-9020-000

Module 1.6x for magnification changer

Item Number: 426137-9020-000

Module 1.6x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Module 0.5x for magnification changer

Recover

Item no.: 426137-9010-000

Module 0.5x for magnification changer

Item Number: 426137-9010-000

Module 0.5x for magnification changer suitable for cameras with a maximum sensor diagonal 11 mm

Item has been added to the configuration

Magnification changer 4x, switchable 60N-60N

Recover

Item no.: 426137-9000-000

Magnification changer 4x, switchable 60N-60N

Item Number: 426137-9000-000

Magnification changer 4x, switchable 60N-60N for connection to 60N camera port, 4 switchable positions, adjustable stop, factor 1x already integrated, 3 empty positions for optional magnification modules

Filters (2)

Interference filter

Item has been added to the configuration

IR blocking filter d=42x2.5

Recover

Item no.: 467876-0001-000

IR blocking filter d=42x2.5

Item Number: 467876-0001-000

IR blocking filter d=42x2.5 Blocking of the IR part between 735-1200 nm, suitable for HBO- and HAL 100 illuminators

Conversion filter

Item has been added to the configuration

Conversion filter CB 8, d=32x2.8

Recover

Item no.: 000000-1024-255

Conversion filter CB 8, d=32x2.8

Item Number: 000000-1024-255

Conversion filter CB 8, d=32x2.8

Photomicrography (4)

T2 adapter

Item has been added to the configuration

T2-adapter for Canon EOS (EF Bayonet)

Recover

Item no.: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item Number: 416013-0000-000

T2-adapter for Canon EOS (EF Bayonet)

Item has been added to the configuration

T2-adapter for Minolta (Autofocus)

Recover

Item no.: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item Number: 416012-0000-000

T2-adapter for Minolta (Autofocus)

Item has been added to the configuration

T2-adapter for Contax (Contax-Bayonet)

Recover

Item no.: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item Number: 416010-0000-000

T2-adapter for Contax (Contax-Bayonet)

Item has been added to the configuration

T2-adapter for Nikon F (F-Bayonet)

Recover

Item no.: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Item Number: 416009-0000-000

T2-adapter for Nikon F (F-Bayonet)

Video devices (17)

Video adapter 60 C

Item has been added to the configuration

Adapter Video 60 C 1/3" 0.4x

Recover

Item no.: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Item Number: 456108-0000-000

Adapter Video 60 C 1/3" 0.4x

Other video adapters

Item has been added to the configuration

Double adapter 60N - 2x 60N with slider mount

Recover

Item no.: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount

Item Number: 426141-9902-000

Double adapter 60N - 2x 60N with slider mount - slider mount for slider with 100% mirror or slider with beam splitter mount - 2 clickstop positions - mount for filters d=25 mm on both exits alternatively required: - slider with 100% mirror or - slider with beam splitter mount and 50:50 beam splitter or other beam splitters with dimensions 26x36 mm

Item has been added to the configuration

Slider with beam splitter mount for double adapter

Recover

Item no.: 426141-9021-000

Slider with beam splitter mount for double adapter

Item Number: 426141-9021-000

Slider with beam splitter mount for double adapter - 2 clickstop positions for exit straight / lateral - mount for beam splitter 26x36 mm

Item has been added to the configuration

Slider with 100% mirror for double adapter

Recover

Item no.: 426141-9011-000

Slider with 100% mirror for double adapter

Item Number: 426141-9011-000

Slider with 100% mirror for double adapter - 2 clickstop positions for exit straight / lateral

Item has been added to the configuration

Universal Digital Camera Adapter d30 M37/52x0.75

Recover

Item no.: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item Number: 426126-0000-000

Universal Digital Camera Adapter d30 M37/52x0.75

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter T2-T2 SLR 2.5x

Recover

Item no.: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item Number: 426116-0000-000

Camera Adapter T2-T2 SLR 2.5x

Item has been added to the configuration

Camera Adapter T2-T2 DSLR 1.6x

Recover

Item no.: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item Number: 426115-0000-000

Camera Adapter T2-T2 DSLR 1.6x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Item has been added to the configuration

Adapter 60N - 44

Recover

Item no.: 426102-0000-000

Adapter 60N - 44

Item Number: 426102-0000-000

Adapter 60N - 44

Item has been added to the configuration

Adapter 60N for microscope camera, d=30mm

Recover

Item no.: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Item Number: 426101-0000-000

Adapter 60N for microscope camera, d=30mm

Measuring and counting components (9)

Microscope slide, calibratable

Item has been added to the configuration

Calibration Slide Universal CG=0

Recover

Item no.: 474029-9011-000

Calibration Slide Universal CG=0

Item Number: 474029-9011-000

Calibration Slide Universal CG=0 Calibration Slide Universal CG=0 without coverslip; positive version - high-precision object relocation - position of reference mark relative to left and upper slide border X=38mm/Y=13mm, +/- 5µm - line with 50mm length to control parallelism - Stage micrometer functionality Micro and Stemi: 5 lines with 1mm intervals in y-direction 100 lines with 1/100mm intervals in y-direction 25 lines with 1mm intervals in x-direction 50 lines with 1/10mm intervals in x-direction - circle areas with diameter 2.5/1.0/0.5/0.1/0.05/0.01mm - concentrical retangles 8x6/4x3/2x1.5/1x0.75mm

Object micrometer A (custom-made)

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Recover

Item no.: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Item Number: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Item has been added to the configuration

Stage micrometer 25 + 50/10 mm Stemi; calibrated

Recover

Item no.: 474025-9800-000

Stage micrometer 25 + 50/10 mm Stemi; calibrated

Item Number: 474025-9800-000

Stage micrometer 25mm/25 + 5mm/50 for stereo, calibrated - 25 mm in 25 divisions, 1 interval = 1 mm - 5 mm in 50 divisions, 1 interval = 0.1 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Item has been added to the configuration

Test Standard for Particle Analysis; calibrated

Recover

Item no.: 433400-9010-000

Test Standard for Particle Analysis; calibrated

Item Number: 433400-9010-000

Test Standard for Particle Analysis; calibrated - size categories according to VDA Vol. 19 and ISO 16232 - size categories: 10, 20, 35, 75, 125, 175, 300, 500, 800, 1200µm - total number of particles: 6960 - shapes: circles, rectangles, ellipses - diameter: 47 mm - diameter covered with particles: 44 mm - AR coating on both sides - calibration certificate

Object micrometer A

Item has been added to the configuration

Stage micrometer for reflected light 5 + 100/100y d=0mm

Recover

Item no.: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm

Item Number: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Item has been added to the configuration

Stage micrometer 25 + 50/10 mm Stemi

Recover

Item no.: 474025-0000-000

Stage micrometer 25 + 50/10 mm Stemi

Item Number: 474025-0000-000

Stage micrometer 25 + 50/10 mm Stemi - 25 lines with 1mm intervals in x-direction - 50 lines with 1/10mm intervals in y-direction

Item has been added to the configuration

Test Standard for Particle Analysis

Recover

Item no.: 433400-0000-000

Test Standard for Particle Analysis

Item Number: 433400-0000-000

Test Standard for Particle Analysis - size categories according to VDA Vol. 19 and ISO 16232 - size categories: 10, 20, 35, 75, 125, 175, 300, 500, 800, 1200µm - total number of particles: 6960 - shapes: circles, rectangles, ellipses - diameter: 47 mm - diameter covered with particles: 44 mm - AR coating on both sides

D SF objective lens micrometer

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Recover

Item no.: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Item Number: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated - with cover slip d=0.16 mm - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Eyepieces (9)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br.foc.

Recover

Item no.: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item Number: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item has been added to the configuration

Eyepiece PL 10x/21 Br. foc.

Recover

Item no.: 444039-9000-000

Eyepiece PL 10x/21 Br. foc.

Item Number: 444039-9000-000

Eyepiece PL 10x/21 Br. foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with net micrometer

Recover

Item no.: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item Number: 444036-9070-000

Eyepiece PL 10x/23 Br. foc. with net micrometer

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Recover

Item no.: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item Number: 444036-9060-000

Eyepiece PL 10x/23 Br. foc. with structure comparison disk

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item has been added to the configuration

Eyepiece 16x/14 Br. foc.

Recover

Item no.: 435063-9160-000

Eyepiece 16x/14 Br. foc.

Item Number: 435063-9160-000

Eyepiece 16x/14 Br. foc.

Eyepiece accessories (10)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Crossline graticule, d=26 mm

Recover

Item no.: 474064-0000-000

Crossline graticule, d=26 mm

Item Number: 474064-0000-000

Crossline graticule, d=26 mm

Item has been added to the configuration

Format reticle MC 2.5x/ d=26 mm

Recover

Item no.: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item Number: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item has been added to the configuration

Crossline micrometer 14:140, d=26 mm

Recover

Item no.: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Item Number: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Net micrometer 10x10/5:10, d=21 mm

Recover

Item no.: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item Number: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item has been added to the configuration

Micrometer 10:100, d=21 mm

Recover

Item no.: 434011-0000-000

Micrometer 10:100, d=21 mm

Item Number: 434011-0000-000

Micrometer 10:100, d=21 mm

Pointer for eyepieces

Item has been added to the configuration

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Recover

Item no.: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Item Number: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Stereomicroscopes (166)

Stemi telescope

Item has been added to the configuration

SteREO Discovery.V20 microscope body

Recover

Item no.: 435003-9901-000

SteREO Discovery.V20 microscope body

Item Number: 435003-9901-000

Microscope Body SteREO Discovery.V20 - Apochromatic stereo telescope system - Motor zoom 20:1 (0.75x...15x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required

Item has been added to the configuration

SteREO Discovery.V12 microscope body

Recover

Item no.: 435001-9901-000

SteREO Discovery.V12 microscope body

Item Number: 435001-9901-000

Microscope Body SteREO Discovery.V12 - Apochromatic stereo telescope system - Motor zoom 12.5:1 (0.8x...10x) - Double iris diaphragm - 76 mm mount diameter - 1x HIP or EMS 3 required

Item has been added to the configuration

SteREO Discovery.V8 microscope body

Recover

Item no.: 435000-0000-000

SteREO Discovery.V8 microscope body

Item Number: 435000-0000-000

SteREO Discovery.V8 microscope body Apochromatic stereo telescope system with 76 mm mount diameter, with 8:1 zoom (1.0x ... 8.0x) manually operable on both sides and switchable click stops at 1x-1.25x-1.6x-2x-2.5x-3.2x-4x-5x-6.3x-8x

User interface

Item has been added to the configuration

System Control Panel SYCOP 3

Recover

Item no.: 435611-9010-000

System Control Panel SYCOP 3

Item Number: 435611-9010-000

System Control Panel SYCOP 3 5.7" color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3

Item has been added to the configuration

Controller EMS 3

Recover

Item no.: 435610-9011-000

Controller EMS 3

Item Number: 435610-9011-000

Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, cable 435403-9030 to focus motor 3 or 435610-5003 to motor 2 additionally required, - 1x SYCOP 3, 2x KL 2500 LCD, 2x footswitch, - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB to work station, 1x RS232 (D-Sub DE9), incl. USB cable 2m and country-specific power cable

Item has been added to the configuration

Manual Rotary Control MARC

Recover

Item no.: 435604-0000-000

Manual Rotary Control MARC

Item Number: 435604-0000-000

Manual Rotary Control MARC - focusing by coaxial coarse/fine knobs, sensibility corresponds to optical data or 1x objective without data, - button pair for accelerated focusing, - button for reproducing of one focus position or selection of rotation sense; - second button pair for accelerated zooming or changing between given zoom steps which coincident with display exactly (without rounding) and reproduce positions with digital accuracy; - mountable instead of HIP or on 435604-9010 table-top base in interest of left/right hand use and free positioning; - operating with focus motor 2 or 3, - incl. cable CAN RJ45 0.5m

Item has been added to the configuration

Human Interface Panel HIP

Recover

Item no.: 435601-0000-000

Human Interface Panel HIP

Item Number: 435601-0000-000

Human Interface Panel HIP with plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS

Binocular tubes

Item has been added to the configuration

Binocular tube S 35°

Recover

Item no.: 435114-0000-000

Binocular tube S 35°

Item Number: 435114-0000-000

Binocular tube S 35° for 48-75mm eye distance

Item has been added to the configuration

Binocular phototube S 20°

Recover

Item no.: 435107-0000-000

Binocular phototube S 20°

Item Number: 435107-0000-000

Binocular phototube S 20° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N

Item has been added to the configuration

Binocular tube S 20°

Recover

Item no.: 435104-9901-000

Binocular tube S 20°

Item Number: 435104-9901-000

Binocular tube S 20° for 51-75mm eye distance

Item has been added to the configuration

Binocular ergo tube S 1.25x 5-45°

Recover

Item no.: 435103-9050-000

Binocular ergo tube S 1.25x 5-45°

Item Number: 435103-9050-000

Binocular ergo tube S 1.25x 5-45° for 55-75mm eye distance and with eyepiece tubes which are 94 mm longer than those of ergo tube 435100 or 435103-9010; especially for Discovery.V8/V12 used in flow boxes or for an upright posture of the observer

Item has been added to the configuration

Binocular Ergo Tube S 5-45°

Recover

Item no.: 435103-9011-000

Binocular Ergo Tube S 5-45°

Item Number: 435103-9011-000

Binocular Ergo Tube S 5-45° - Eye distance 51-75 mm - NBR bellows

Item has been added to the configuration

Binocular ergo phototube S 5-45°

Recover

Item no.: 435100-0000-000

Binocular ergo phototube S 5-45°

Item Number: 435100-0000-000

Binocular ergo phototube S 5-45° for 51-75mm eye distance and with 100/100 switchover of the right channel to interface 60N

Objectives

Item has been added to the configuration

Objective Plan Apo S 3.5x mono FWD 16 mm

Recover

Item no.: 435250-0000-000

Objective Plan Apo S 3.5x mono FWD 16 mm

Item Number: 435250-0000-000

Objective Plan Apo S 3.5x mono FWD 16 mm for vertical 2D imaging on SteREO Discovery, mountable at nosepiece 6x cod by 435306-9000 or at objective slider S/doc by 435304

Item has been added to the configuration

Objective Achromat S 1.5x FWD 28 mm

Recover

Item no.: 435228-9901-000

Objective Achromat S 1.5x FWD 28 mm

Item Number: 435228-9901-000

Objective Achromat S 1.5x FWD 28 mm (93 mm parfocal length)

Item has been added to the configuration

Objective Plan Apo S 1.5x FWD 30 mm

Recover

Item no.: 435226-0000-000

Objective Plan Apo S 1.5x FWD 30 mm

Item Number: 435226-0000-000

Objective Plan Apo S 1.5x FWD 30 mm (137 mm parfocal length)

Item has been added to the configuration

Objective Plan Apo S 2.3x FWD 10 mm

Recover

Item no.: 435224-0000-000

Objective Plan Apo S 2.3x FWD 10 mm

Item Number: 435224-0000-000

Objective Plan Apo S 2.3x FWD 10 mm (105 mm transfer length)

Item has been added to the configuration

Objective Achromat S 1.25x FWD 50mm

Recover

Item no.: 435220-0000-000

Objective Achromat S 1.25x FWD 50mm

Item Number: 435220-0000-000

Objective Achromat S 1.25x FWD 50mm (93 mm parfocal length)

Item has been added to the configuration

Objective Achromat S 1.0x FWD 63 mm

Recover

Item no.: 435217-9901-000

Objective Achromat S 1.0x FWD 63 mm

Item Number: 435217-9901-000

Objective Achromat S 1.0x FWD 63 mm (93 mm parfocal length)

Item has been added to the configuration

Objective Achromat S 0.63x FWD 107 mm

Recover

Item no.: 435216-9901-000

Objective Achromat S 0.63x FWD 107 mm

Item Number: 435216-9901-000

Objective Achromat S 0.63x FWD 107 mm (137 mm parfocal length)

Item has been added to the configuration

Objective Achromat S 0.5x FWD 134 mm

Recover

Item no.: 435215-9901-000

Objective Achromat S 0.5x FWD 134 mm

Item Number: 435215-9901-000

Objective Achromat S 0.5x FWD 134 mm (164 mm transfer length)

Item has been added to the configuration

Objective Achromat S 0.3x FWD 236 mm

Recover

Item no.: 435214-9901-000

Objective Achromat S 0.3x FWD 236 mm

Item Number: 435214-9901-000

Objective Achromat S 0.3x FWD 236 mm (266 mm transfer length)

Item has been added to the configuration

Oblique-view module S 0.3x with LED ring light (D)

Recover

Item no.: 435214-9570-000

Oblique-view module S 0.3x with LED ring light (D)

Item Number: 435214-9570-000

Oblique-view module S 0.3x with LED ring light (D) for all-side and centered viewing of i.e. a soldering bump under 27° against the vertical and with 95 mm FWD, in turn-stop position the switching to vertical viewing is possible; dia. 210 x 120 mm oblique-view module incl. objective Achromat S 0.3x, switchable red LED spot for targeting supplied by 2x 1.5V AA battery and switchable LED ring light dia. 210mm accessories: holding ring to Discovery, table-top supply 100...240VAC / 24VDC 60W, and country-specific mains cord

Item has been added to the configuration

Objective Plan Apo S 1.0x FWD 60 mm

Recover

Item no.: 435203-0000-000

Objective Plan Apo S 1.0x FWD 60 mm

Item Number: 435203-0000-000

Objective Plan Apo S 1.0x FWD 60 mm (137 mm parfocal length)

Item has been added to the configuration

Objective Plan Apo S 0.63x FWD 80 mm

Recover

Item no.: 435202-9903-000

Objective Plan Apo S 0.63x FWD 80 mm

Item Number: 435202-9903-000

Objective Plan Apo S 0.63x FWD 80 mm (137 mm parfocal distance)

Item has been added to the configuration

Objective Plan S 1.0x FWD 81 mm

Recover

Item no.: 435200-0000-000

Objective Plan S 1.0x FWD 81 mm

Item Number: 435200-0000-000

Objective Plan S 1.0x FWD 81 mm (137 mm parfocal length)

Other adapters

Item has been added to the configuration

Intermediate analyzer tube S mot mono

Recover

Item no.: 435119-9000-000

Intermediate analyzer tube S mot mono

Item Number: 435119-9000-000

Intermediate analyzer tube S mot mono motorized change of analyzer in right channel via CAN command or push of its button; suitable on Particle Analyzer for vertical documentation through the right channel of Discovery body with nosepiece S/doc (435302); power supply by CAN distributor; incl. 2 cables 0.5m and 1m

Item has been added to the configuration

Intermediate Y-tube S, switchable

Recover

Item no.: 435117-0000-000

Intermediate Y-tube S, switchable

Item Number: 435117-0000-000

Intermediate Y-tube S, switchable switching by push rod between stereoscopic viewing (3D) and binocular vertical viewing (2D) through right channel of Discovery body with 435301 objective slider S/doc or 435302 or 435303-9000 nosepiece S/doc

Item has been added to the configuration

Intermediate Y-tube S mot

Recover

Item no.: 435103-9030-000

Intermediate Y-tube S mot

Item Number: 435103-9030-000

Intermediate Y-tube S mot motorized change (at push of its button or via CAN command from nosepiece 435302 or 435303-9000) between stereoscopic viewing (3D) and binocular vertical viewing (2D) through the right channel of Discovery body; powersupply by CAN distributor or power supply plug CAN RJ45, 000000-0514-784; incl. 2 cables 0.5m and 1m

Item has been added to the configuration

Intermediate tube S, fixed 40 mm

Recover

Item no.: 435102-0000-000

Intermediate tube S, fixed 40 mm

Item Number: 435102-0000-000

Intermediate tube S, fixed 40 mm to increase the viewing height

Stemi carrier, telescope

Item has been added to the configuration

Mount S with diam. 76 mm support

Recover

Item no.: 435402-0000-000

Mount S with diam. 76 mm support

Item Number: 435402-0000-000

Mount S with diam. 76 mm support

Item has been added to the configuration

Coarse/fine drive with column S 490mm

Recover

Item no.: 435400-9901-000

Coarse/fine drive with column S 490mm

Item Number: 435400-9901-000

Coarse/fine drive with column S 490mm - Lifting range 340 mm, load capacity 10 kg - For stand bases 300/450

Stand without power supply

Item has been added to the configuration

Base 300 for epi-illumination

Recover

Item no.: 435433-9401-000

Base 300 for epi-illumination

Item Number: 435433-9401-000

Base 300 for epi-illumination WxDxH 290x353x25mm stand base with 2x M8 threaded holes and b/w plate D=120mm; compatible to T column 350mm and central column S 490mm; VisiLED transmitted light (417095-9400) mountable from below, in addition glass plate D=120mm (435501-0002); stage d=84mm needs adapter 84/120 (435430-9010) additionally

Item has been added to the configuration

Coarse/Fine Drive, T Column 350 mm

Recover

Item no.: 435433-9002-000

Coarse/Fine Drive, T Column 350 mm

Item Number: 435433-9002-000

Coarse/Fine Drive, T Column 350 mm - Lifting range 220 mm, load capacity 10 kg - For stand bases 300/450 - Stand base 450 from version -9902, only without nosepiece

Item has been added to the configuration

Stand base 450

Recover

Item no.: 435430-9903-000

Stand base 450

Item Number: 435430-9903-000

Stand base 450 WxDxH 449x346x30mm stand base with 3x M8 threaded holes, insert plate 450 and b/w plate D=120mm; compatible with column S 490/800 mm or T column 350mm and with transmitted light unit 450 or 450 mot or VisiLED transmitted light; stage d=84mm needs adapter 84/120 (435430-9010) additionally

Item has been added to the configuration

Stand N with Column 32/450 mm

Recover

Item no.: 435424-9400-000

Stand N with Column 32/450 mm

Item Number: 435424-9400-000

Stand N with Column 32/450 mm - Stand plate 440x370 mm - B/W plastic plate D=84x4 mm - 2 stage clips, safety-ring

Item has been added to the configuration

Stand Base B 32

Recover

Item no.: 435424-9221-000

Stand Base B 32

Item Number: 435424-9221-000

Stand Base B 32 - Massive stand base 200x280 mm, 20 Kg - For column 32/450 mm or 32/650 mm

Item has been added to the configuration

Stand M

Recover

Item no.: 435424-9100-000

Stand M

Item Number: 435424-9100-000

Stand M - Stand base D340xW300xH35 mm - Working surface W255xD215 mm - Interface d=84 mm for stages - Central through-hole 40 mm - Column 360 mm with drive, lifting range 190 mm - Stemi mount d=76 mm, load capacity 5 Kg, adjustable friction - 2x M8 thread for adaptation of accessories Additionally included: - B/W plastic plate D=84x5 mm - Dust cover

Item has been added to the configuration

Table attachment device SDA

Recover

Item no.: 435412-9000-000

Table attachment device SDA

Item Number: 435412-9000-000

Table attachment device SDA - for table plates up to thickness 55 mm - Steel flange Ø 150 mm, thickness 10 mm - Support for vertical column SDA - 3 holes Ø 9 mm along a circle Ø 120 mm - incl. 3x screws M8x80, spring rings, washers, hexagon nuts, tools

Item has been added to the configuration

Stand base SDA (D)

Recover

Item no.: 435412-0000-000

Stand base SDA (D)

Item Number: 435412-0000-000

Stand base SDA (D) - Dimensions 350x350x50 mm, weight 30 kg - With rubber feet, 2 recessed grips, central borehole for screwing the vertical column SDA 40/610

Item has been added to the configuration

Double Boom SDA (D)

Recover

Item no.: 435411-0000-000

Double Boom SDA (D)

Item Number: 435411-0000-000

Double Boom SDA (D) - Dimensions 670x200x170 mm, load capacity max. 8 kg - Double arm 360° rotatable around the vertical column - Boom length (incl. Stemi mount) 360-690 mm - Tilting/swiveling head with column 32/200 integrated Additionally included: - Vertical column SDA 40/610 with screw M16 - Safety-ring for height fixation

Item has been added to the configuration

Motor focus 3 with column S 490mm

Recover

Item no.: 435403-9001-000

Motor focus 3 with column S 490mm

Item Number: 435403-9001-000

Motor focus 3 with column S 490mm - Lifting range 340 mm, load capacity 18 kg - For stand bases 300/450

Stemi stage accessories

Item has been added to the configuration

Ground glass plate, d=84 mm

Recover

Item no.: 475291-0000-000

Ground glass plate, d=84 mm

Item Number: 475291-0000-000

Ground glass plate, d=84 mm

Item has been added to the configuration

B/W plastic plate, d=84 mm

Recover

Item no.: 475290-9901-000

B/W plastic plate, d=84 mm

Item Number: 475290-9901-000

B/W plastic plate, d=84 mm

Item has been added to the configuration

Adherently coated plate, d=84mm

Recover

Item no.: 475288-0000-000

Adherently coated plate, d=84mm

Item Number: 475288-0000-000

Adherently coated plate, d=84mm

Item has been added to the configuration

Clear glass plate

Recover

Item no.: 475265-0001-000

Clear glass plate

Item Number: 475265-0001-000

Clear glass plate

Item has been added to the configuration

Stage diaphragm d= 84/40 mm

Recover

Item no.: 455140-0111-000

Stage diaphragm d= 84/40 mm

Item Number: 455140-0111-000

Stage diaphragm d= 84/40 mm

Item has been added to the configuration

Stage diaphragm d=84/25 mm

Recover

Item no.: 455140-0110-000

Stage diaphragm d=84/25 mm

Item Number: 455140-0110-000

Stage diaphragm d=84/25 mm

Item has been added to the configuration

Stage adapter 84+120 for Transillumination base 300

Recover

Item no.: 435533-9510-000

Stage adapter 84+120 for Transillumination base 300

Item Number: 435533-9510-000

Stage adapter 84+120 for Transillumination base 300 80mm free dia., 4 captive screws; for mounting of unit d=84mm or for screwing-on of stage d=120mm; not needed for gliding stage S 110x110

Item has been added to the configuration

Stage carrier S, 85mm high, d=120mm

Recover

Item no.: 435498-0000-000

Stage carrier S, 85mm high, d=120mm

Item Number: 435498-0000-000

Stage carrier S, 85mm high, d=120mm for Axio Imager stages, VisiLED transillumination BF (417095-9400) insertable

Item has been added to the configuration

Insert plate S, glass 237x157x3mm (D)

Recover

Item no.: 435465-9053-000

Insert plate S, glass 237x157x3mm (D)

Item Number: 435465-9053-000

Insert plate S, glass 237x157x3mm (D) needed to mechanical stages S 150x100

Item has been added to the configuration

Insert plate S, metal 237x157x3mm (D)

Recover

Item no.: 435465-9052-000

Insert plate S, metal 237x157x3mm (D)

Item Number: 435465-9052-000

Insert plate S, metal 237x157x3mm (D) needed to mechanical stages S 150x100

Item has been added to the configuration

Adapter frame S 160x116 epi-illumination (D)

Recover

Item no.: 435465-9050-000

Adapter frame S 160x116 epi-illumination (D)

Item Number: 435465-9050-000

Adapter frame S 160x116 epi-illumination (D) holding frames and plates 160x116 of Axio Imager are adapted to stages S 150x100, using together with transillumination top 450 mot (435500-9000) is not allowed

Item has been added to the configuration

Mounting frame 116x116 / 84 mm (D)

Recover

Item no.: 435461-9001-000

Mounting frame 116x116 / 84 mm (D)

Item Number: 435461-9001-000

Mounting frame 116x116 / 84 mm (D)

Item has been added to the configuration

Stage adapter 84/120, centerable

Recover

Item no.: 435430-9020-000

Stage adapter 84/120, centerable

Item Number: 435430-9020-000

Stage adapter 84/120, centerable 63mm free dia., 3 captive screws, adjusting disk d=72mm; alternative to 435430-9010 for centering of pol or ball-and-socket stage at interface d=120mm

Item has been added to the configuration

Stage adapter 84/120

Recover

Item no.: 435430-9010-000

Stage adapter 84/120

Item Number: 435430-9010-000

Stage adapter 84/120 63mm free dia., 3 captive screws; for mounting of unit d=84mm on interface d=120mm

Item has been added to the configuration

Plastic Plate B/W D=84x5 mm

Recover

Item no.: 435425-9321-000

Plastic Plate B/W D=84x5 mm

Item Number: 435425-9321-000

Plastic Plate B/W D=84x5 mm - For stands K/M

Stand accessories

Item has been added to the configuration

Column 32/450

Recover

Item no.: 475120-0000-000

Column 32/450

Item Number: 475120-0000-000

Column 32/450

Item has been added to the configuration

Column 32/650

Recover

Item no.: 475119-0000-000

Column 32/650

Item Number: 475119-0000-000

Column 32/650

Item has been added to the configuration

Cable EMS3/CMD - focus motor 2

Recover

Item no.: 435610-5003-000

Cable EMS3/CMD - focus motor 2

Item Number: 435610-5003-000

Cable EMS3/CMD - focus motor 2

Item has been added to the configuration

Articulated arm S M8-M8 (D)

Recover

Item no.: 435443-0000-000

Articulated arm S M8-M8 (D)

Item Number: 435443-0000-000

Articulated arm S M8-M8 (D)

Item has been added to the configuration

B/W plate d=120mm

Recover

Item no.: 435430-0124-000

B/W plate d=120mm

Item Number: 435430-0124-000

B/W plate d=120mm

Item has been added to the configuration

Cable EMS3/CMD - focus motor 3

Recover

Item no.: 435403-9030-000

Cable EMS3/CMD - focus motor 3

Item Number: 435403-9030-000

Cable EMS3/CMD - focus motor 3

Item has been added to the configuration

Cable EMS2 - focus motor 3

Recover

Item no.: 435403-9020-000

Cable EMS2 - focus motor 3

Item Number: 435403-9020-000

Cable EMS2 - focus motor 3

Item has been added to the configuration

Cable EMS3/CMD - Focus Motor 3, 4 m

Recover

Item no.: 000000-0628-717

Cable EMS3/CMD - Focus Motor 3, 4 m

Item Number: 000000-0628-717

Cable EMS3/CMD - Focus Motor 3, 4 m

Stemi polarizer

Item has been added to the configuration

Polarizer S

Recover

Item no.: 455174-0000-000

Polarizer S

Item Number: 455174-0000-000

Polarizer S Polarizer S

Item has been added to the configuration

Polarizer S, d=84 mm

Recover

Item no.: 435531-0000-000

Polarizer S, d=84 mm

Item Number: 435531-0000-000

Polarizer S, d=84 mm

Item has been added to the configuration

Polarizer Transillumination K/M

Recover

Item no.: 435526-9020-000

Polarizer Transillumination K/M

Item Number: 435526-9020-000

Polarizer Transillumination K/M

Item has been added to the configuration

Polarizer Spot K LED

Recover

Item no.: 435526-9010-000

Polarizer Spot K LED

Item Number: 435526-9010-000

Polarizer Spot K LED

Item has been added to the configuration

EasyLED spot polarizer (D)

Recover

Item no.: 417096-9600-000

EasyLED spot polarizer (D)

Item Number: 417096-9600-000

EasyLED spot polarizer (D)

Item has been added to the configuration

Polarization filter set VisiLED/EasyLED (D)

Recover

Item no.: 417095-9550-000

Polarization filter set VisiLED/EasyLED (D)

Item Number: 417095-9550-000

Polarization filter set VisiLED/EasyLED (D) fits 417095-9255 or 417096-9200/-9300

Item has been added to the configuration

Polarizer for VisiLED/EasyLED transillumination H (D)

Recover

Item no.: 417085-9500-000

Polarizer for VisiLED/EasyLED transillumination H (D)

Item Number: 417085-9500-000

Polarizer for VisiLED/EasyLED transillumination H (D)

Item has been added to the configuration

Polarization filter set S, d=66mm special (D)

Recover

Item no.: 417075-9009-710

Polarization filter set S, d=66mm special (D)

Item Number: 417075-9009-710

Polarization filter set S, d=66mm special (D) consisting of fixed analyzer and rotatable ring polarizer fitting 435506 ring illuminator, only ring polarizer useable together with analyzer tube in particle analysis

Item has been added to the configuration

Polarization filter set S, d=66 mm (D)

Recover

Item no.: 417075-9009-000

Polarization filter set S, d=66 mm (D)

Item Number: 417075-9009-000

Polarization filter set S, d=66 mm (D) consisting of fixed analyzer and rotary, annular polarizer

Item has been added to the configuration

Polarization Filter Set HPRL (D)

Recover

Item no.: 417040-9320-000

Polarization Filter Set HPRL (D)

Item Number: 417040-9320-000

Polarization Filter Set HPRL (D) - Extinction of any direct reflexions and glary object parts by crossed polarizers - To observe diffuse reflecting object parts without disturbing glare - Ring-Polarizer, continuously rotatable - Fixed Analyzer with thread to mount at HPRL Ring illuminator

Stemi lambda plate

Item has been added to the configuration

Lambda plate in slider

Recover

Item no.: 455172-0000-000

Lambda plate in slider

Item Number: 455172-0000-000

Lambda plate in slider Lambda plate in slider

Other types of illumination

Item has been added to the configuration

Adapter for built-in illuminator

Recover

Item no.: 455149-0000-000

Adapter for built-in illuminator

Item Number: 455149-0000-000

Adapter for built-in illuminator

Item has been added to the configuration

Built-in light guide 1500 with focusing attachment (D)

Recover

Item no.: 455145-0000-000

Built-in light guide 1500 with focusing attachment (D)

Item Number: 455145-0000-000

Built-in light guide 1500 with focusing attachment (D) - Flexible light guide 6/1000 mm with focusing attachment - Sturdy metal PVC hose - Long sleeve ending for ca. 45 mm adjustment range for positioning the spots in the light guide holder

Stemi specimen stages

Item has been added to the configuration

Ball-and-Socket Stage +/-30° rotatable

Recover

Item no.: 455123-9901-000

Ball-and-Socket Stage +/-30° rotatable

Item Number: 455123-9901-000

Ball-and-Socket Stage +/-30° rotatable - Stage plate D=158 mm with interface d=84 mm - Adherently coated plate D=84 mm - 2 stage clips

Item has been added to the configuration

Gliding stage +/-20mm, rotatable, d=84mm

Recover

Item no.: 455122-0000-000

Gliding stage +/-20mm, rotatable, d=84mm

Item Number: 455122-0000-000

Gliding stage +/-20mm, rotatable, d=84mm

Item has been added to the configuration

Rotating Pol stage for stereomicroscopes

Recover

Item no.: 455120-9901-000

Rotating Pol stage for stereomicroscopes

Item Number: 455120-9901-000

Rotating Pol stage for stereomicroscopes with 2 stage clips, glass plate 72 mm and supports for polarizer 455174 and Lambda plate 455172

Item has been added to the configuration

Measuring stage S 150x100 mot; CAN (D)

Recover

Item no.: 435465-9020-000

Measuring stage S 150x100 mot; CAN (D)

Item Number: 435465-9020-000

Measuring stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors, encoders and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 1µm - absolute accuracy +/- 2µm - interface d=120mm, BNC trigger and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination

Item has been added to the configuration

Mechanical stage S 150x100 R (D)

Recover

Item no.: 435465-9010-000

Mechanical stage S 150x100 R (D)

Item Number: 435465-9010-000

Mechanical stage S 150x100 R (D) 3-plates mechanical stage 322x251x28 mm for max. load 3 kg; with horizontal coaxial drive 115 mm right, interface d=120 mm and 237x157 mm support for insert plate S; useable with transillumination

Item has been added to the configuration

Mechanical stage S 150x100 mot; CAN (D)

Recover

Item no.: 435465-9000-000

Mechanical stage S 150x100 mot; CAN (D)

Item Number: 435465-9000-000

Mechanical stage S 150x100 mot; CAN (D) - 3-plates mechanical stage (495...530)x(280...390)x(28...95)mm for max. load 3kg, - specimen bearing 340x207mm and 237x157mm support for insert plate S, - stepper motors and integrated controller, - variable speed up to 17mm/s, - speed up to 100mm/s in automatic find action, - reproducibility +/- 2µm - absolute accuracy +/- 30µm - interface d=120mm and CAN-HD15, incl. CAN-HD15 cable, - useable with transillumination

Item has been added to the configuration

Gliding stage S 110x110, d=120 mm (D)

Recover

Item no.: 435461-0000-000

Gliding stage S 110x110, d=120 mm (D)

Item Number: 435461-0000-000

Gliding stage S 110x110, d=120 mm (D) 3-plates stage 267x152x32mm with x-y ball tracks and glass plate 116x116mm; useable with transillumination

Item has been added to the configuration

Mechanical stage S 100x100, d=120 mm (D)

Recover

Item no.: 435460-0000-000

Mechanical stage S 100x100, d=120 mm (D)

Item Number: 435460-0000-000

Mechanical stage S 100x100, d=120 mm (D) 3-plates mechanical stage 267x152x100mm with vertical coaxial drive 60mm right, glass plate 116x116mm and support column, therein VisiLED transillumination BF (417095-9400) insertable

Various accessories

Item has been added to the configuration

Foot pedal S

Recover

Item no.: 435602-0000-000

Foot pedal S

Item Number: 435602-0000-000

Foot pedal S for SYCOP for the continuous control of a microscope parameter at option

Item has been added to the configuration

Resolution test slide 3000 (D)

Recover

Item no.: 435298-9901-000

Resolution test slide 3000 (D)

Item Number: 435298-9901-000

Resolution test slide 3000 glass slide 76x26x2.5 mm with 3 positive and 3 negative bar charts, each one includes 45 bar groups of 10 LP/mm up to 3000 LP/mm

Item has been added to the configuration

Cover plate S

Recover

Item no.: 435103-9040-000

Cover plate S

Item Number: 435103-9040-000

Cover plate S covers the stereo port of intermediate phototube of SteREO Discovery/Lumar configurations without binocular tube

Item has been added to the configuration

Power supply plug CAN RJ45 DC 24V 30W (D)

Recover

Item no.: 000000-0514-784

Power supply plug CAN RJ45 DC 24V 30W (D)

Item Number: 000000-0514-784

Power supply plug CAN RJ45 DC 24V 30W (D) for power supply of any coupled CAN items S; incl. mains input plug EU, GB, USA/J, AUS in cardboard box

Fluorescence illumination for stereomicroscopes

Item has been added to the configuration

Lumar filter support, empty

Recover

Item no.: 435551-0000-000

Lumar filter support, empty

Item Number: 435551-0000-000

Lumar filter support, empty

Item has been added to the configuration

Lumar filter wheel

Recover

Item no.: 435550-0000-000

Lumar filter wheel

Item Number: 435550-0000-000

Lumar filter wheel

Item has been added to the configuration

Intermediate LED tube S, 96HE BFP/DAPI

Recover

Item no.: 435123-9961-000

Intermediate LED tube S, 96HE BFP/DAPI

Item Number: 435123-9961-000

Intermediate LED tube S, 96HE BFP/DAPI Intermediate tube for SteREO Discovery incl. - 2 LED modules 385 nm - 2 filter sets 96HE (EX BP 390/40, BS FT 420, EM BP 450/40) - FL antiglare screen with support - 2 CAN RJ45 sockets and BNC entry for TTL trigger - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Intermediate LED tube S, 69 FITC

Recover

Item no.: 435123-9691-000

Intermediate LED tube S, 69 FITC

Item Number: 435123-9691-000

Intermediate LED tube S, 69 FITC Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 69 (EX BP 470/35, BS FT 499, EM 560/100), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Intermediate LED tube S, 64HE mPlum

Recover

Item no.: 435123-9641-000

Intermediate LED tube S, 64HE mPlum

Item Number: 435123-9641-000

Intermediate LED tube S, 64HE mPlum Intermediate tube for SteREO Discovery incl. - 2 LED modules 590 nm, - 2 filter sets 64HE (EX BP 587/25, BS FT 605, EM BP 647/70), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Intermediate LED tube S, 38HE GFP

Recover

Item no.: 435123-9381-000

Intermediate LED tube S, 38HE GFP

Item Number: 435123-9381-000

Intermediate LED tube S, 38HE GFP Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 38HE (EX BP 470/40, BS FT 495, EM BP 525/50), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Intermediate LED tube S, 14 mRFP

Recover

Item no.: 435123-9141-000

Intermediate LED tube S, 14 mRFP

Item Number: 435123-9141-000

Intermediate LED tube S, 14 mRFP Intermediate tube for SteREO Discovery incl. - 2 LED modules 530 nm, - 2 filter sets 14 (EX BP 510-560, BS FT 580, EM LP 590), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Intermediate LED tube S, 09 Epodye

Recover

Item no.: 435123-9091-000

Intermediate LED tube S, 09 Epodye

Item Number: 435123-9091-000

Intermediate LED tube S, 09 Epodye Intermediate tube for SteREO Discovery incl. - 2 LED modules 470 nm, - 2 filter sets 09 (EX BP 450-490, BS FT 510, EM LP 515), - FL antiglare screen with support, - 2 CAN RJ45 sockets and BNC entry for TTL trigger, - power supply CAN RJ45 DC 24V 30W, EU, GB, USA/J, AUS, - 2 CAN RJ45 cables 0.5m and 1m

Item has been added to the configuration

Filter cube 120 UV/DAPI LP (D)

Recover

Item no.: 435115-5120-000

Filter cube 120 UV/DAPI LP (D)

Item Number: 435115-5120-000

Filter cube 120 UV/DAPI LP (D) EX BP 375/28, BS FT 415, EM LP 435

Item has been added to the configuration

Filter cube 119 Pacific Blue LP (D)

Recover

Item no.: 435115-5119-000

Filter cube 119 Pacific Blue LP (D)

Item Number: 435115-5119-000

Filter cube 119 Pacific Blue LP (D) EX BP 405/30, BS FT 440, EM LP 450

Item has been added to the configuration

Filter cube 57 GFP LP (D)

Recover

Item no.: 435115-5057-000

Filter cube 57 GFP LP (D)

Item Number: 435115-5057-000

Filter cube 57 GFP LP (D) EX BP 470/40, BS FT 495, EM LP 500

Item has been added to the configuration

Filter cube 50 Cy5 (D)

Recover

Item no.: 435115-5050-000

Filter cube 50 Cy5 (D)

Item Number: 435115-5050-000

Filter cube 50 Cy5 (D) EX BP 640/30, BS FT 660, EM BP 690/50

Item has been added to the configuration

Filter cube 47 CFP (D)

Recover

Item no.: 435115-5047-000

Filter cube 47 CFP (D)

Item Number: 435115-5047-000

Filter cube 47 CFP (D) EX BP 436/20, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter cube 46 YFP (D)

Recover

Item no.: 435115-5046-000

Filter cube 46 YFP (D)

Item Number: 435115-5046-000

Filter cube 46 YFP (D) EX BP 500/20, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter cube 43 Cy3/Rhod/RFP (D)

Recover

Item no.: 435115-5043-000

Filter cube 43 Cy3/Rhod/RFP (D)

Item Number: 435115-5043-000

Filter cube 43 Cy3/Rhod/RFP (D) EX BP 545/25, BS FT 565, EM BP 606/70

Item has been added to the configuration

Filter cube 38 GFP BP (D)

Recover

Item no.: 435115-5038-000

Filter cube 38 GFP BP (D)

Item Number: 435115-5038-000

Filter cube 38 GFP BP (D) EX BP 470/40, BS FT 495, EM BP 525/50

Item has been added to the configuration

PentaFluar S 120 vertical illuminator (D)

Recover

Item no.: 435115-0000-000

PentaFluar S 120 vertical illuminator (D)

Item Number: 435115-0000-000

PentaFluar S 120 vertical illuminator (D) with 5 position filter turret and antiglare shield, for SteREO Discovery and HXP 120 or X-Cite 120 S illuminator

Reflected-light illumination

Item has been added to the configuration

Focusing attachment d=6 mm without filters

Recover

Item no.: 435540-9003-000

Focusing attachment d=6 mm without filters

Item Number: 435540-9003-000

Focusing attachment d=6 mm without filters

Item has been added to the configuration

Ring Illuminator K LED segmentable

Recover

Item no.: 435525-9050-000

Ring Illuminator K LED segmentable

Item Number: 435525-9050-000

Ring Illuminator K LED segmentable - 48 LEDs in 2 rows, tilted - FWD 50...300 mm, mount d=66 mm - Separate controls for segmentation and rotation - 4 modes: Full, half, quarter circle, 2 facing quarter circles - Manual turning in 90° steps or continuous rotation - For stands K EDU/LAB/MAT, stand M LED or controller K LED

Item has been added to the configuration

Double Spot Illuminator K LED

Recover

Item no.: 435525-9020-000

Double Spot Illuminator K LED

Item Number: 435525-9020-000

Double Spot Illuminator K LED - Gooseneck double spot, 2x 160 mm for variable epi-illumination - 2x thread M24x0.5 for polarizer - Height adjustable - For stands K EDU/LAB/MAT and stand M LED

Item has been added to the configuration

Spot Illuminator K LED

Recover

Item no.: 435525-9010-000

Spot Illuminator K LED

Item Number: 435525-9010-000

Spot Illuminator K LED - Single spot for brightfield and darkfield epi-illumination - Thread M24x0.5 for polarizer - Height adjustable, inclinable, zoomable - For stands K EDU/LAB/MAT and stand M LED

Item has been added to the configuration

Diffuse face light M8 with light guide (D)

Recover

Item no.: 435508-0000-000

Diffuse face light M8 with light guide (D)

Item Number: 435508-0000-000

Diffuse face light M8 with light guide (D) radiating surface 78x30 mm, outer dimensions 140x58x22 mm, incl. light guide 8/1000 mm and M6/M8 screw adapter

Item has been added to the configuration

Diffuser S, telescopic, d=66 mm/M8

Recover

Item no.: 435507-0000-000

Diffuser S, telescopic, d=66 mm/M8

Item Number: 435507-0000-000

Diffuser S, telescopic, d=66 mm/M8 incl. light guide 8/1000 mm; 88mm external dia. allows assembling on nosepiece; 45...84 mm length fittable to medium-sized FWD or in case of long FWD mounting by M8-M8 arm nearly to specimen

Item has been added to the configuration

EasyLED Double Spot Plus K/M/32 (D)

Recover

Item no.: 417096-9700-000

EasyLED Double Spot Plus K/M/32 (D)

Item Number: 417096-9700-000

EasyLED Double Spot Plus K/M/32 (D) - Flex-and-stay gooseneck arms, 2x 490 mm - 2x LED High Power Spots, CCT typ. 5600 K - Max. light flux typ. 260 lm (130 lm per spot) - LED Lifetime typ. 50.000h (until intensity drop to 70%) - Interface M22.5x0.5 for EasyLED spot polarizer - Illuminator housing with push button for operation modes and rotary button for continuous intensity adjustment (scale 0ÔÇª5) - Operation Modes: Spot 1 ON / Spot 2 ON / Spot 1+2 ON / Spot 1+2 OFF - Plug-in power supply 5V DC 6VA/100ÔÇª240V AC/50ÔÇª60Hz with cable 1.4 m and 4 plug adapters EU, GB, US/JP, AU Additionally included: - Adapter for stands K/M - Adapter for column 32

Item has been added to the configuration

Set for simultanous fixing (D)

Recover

Item no.: 417095-9500-000

Set for simultanous fixing (D)

Item Number: 417095-9500-000

Set for simultanous fixing (D) for VisiLED BF+DF to objectives S with FWD 40...100 mm

Item has been added to the configuration

VisiLED ring light S 40-10 DF (D)

Recover

Item no.: 417095-9300-000

VisiLED ring light S 40-10 DF (D)

Item Number: 417095-9300-000

VisiLED ring light S 40-10 DF (D) for dark field, working distance 5...15 mm

Item has been added to the configuration

VisiLED ring light S 80-55 BF, d=66 mm (D)

Recover

Item no.: 417095-9255-000

VisiLED ring light S 80-55 BF, d=66 mm (D)

Item Number: 417095-9255-000

VisiLED ring light S 80-55 BF, d=66 mm (D) for bright field, working distance 45...95 mm

Item has been added to the configuration

VisiLED ring light S 80-25 BF, d=66 mm (D)

Recover

Item no.: 417095-9225-000

VisiLED ring light S 80-25 BF, d=66 mm (D)

Item Number: 417095-9225-000

VisiLED ring light S 80-25 BF, d=66 mm (D) for brightfield, working distance 25...50 mm

Item has been added to the configuration

VisiLED slim ring light S BF, d=66mm (D)

Recover

Item no.: 417095-9150-000

VisiLED slim ring light S BF, d=66mm (D)

Item Number: 417095-9150-000

VisiLED slim ring light S BF, d=66mm (D) incl. 2 focus rings: f50 ring lens with FWD 40-90mm and f25 ring mirror with FWD 20-40mm; 2 pcs. ring illuminator are mountable side by side at objective nosepiece of SteREO Discovery or Axio Zoom

Item has been added to the configuration

Flexible Light Guide 1500, 5/2200 mm

Recover

Item no.: 417075-9220-000

Flexible Light Guide 1500, 5/2200 mm

Item Number: 417075-9220-000

Flexible Light Guide 1500, 5/2200 mm - For focussing attachment and build-in epi-illumination - Output sleeve 50 mm (6/20 mm and 10/30 mm)

Item has been added to the configuration

LED double spot for mount S (D)

Recover

Item no.: 417040-9560-000

LED double spot for mount S (D)

Item Number: 417040-9560-000

LED double spot for mount S (D) - LED Hi-Power double spot 5500K - goose-neck branches, 2x 570 mm - angle adapter for mount S (435402) - 2-channel control unit - table-top supply unit 100-250V and country-specific mains cord

Item has been added to the configuration

LED double spot for column 32 (D)

Recover

Item no.: 417040-9450-000

LED double spot for column 32 (D)

Item Number: 417040-9450-000

LED double spot for column 32 (D) - LED Hi-Power double spot 5500K - goose-neck branches, 2x 570 mm - clamping ring for column 32 - 2-channel control unit - table-top supply unit 100-250V and country-specific mains cord

Item has been added to the configuration

High Power LED Ring Illuminator, segmentable (HPRL) (D)

Recover

Item no.: 417040-9300-000

High Power LED Ring Illuminator, segmentable (HPRL) (D)

Item Number: 417040-9300-000

High Power LED Ring Illuminator, segmentable (HPRL) (D) - 8 High Power LEDs with ring optics, optics mountable for near- or far WD range - Near WD range position: FWD 45-130 mm, Illuminance typ. 220 klx (@ FWD 50 mm) - Far WD range position: FWD 80-300 mm, Illuminance typ. 170 klx (@ FWD 90 mm) - Correlated color temperature ca. 5800 K, lifetime ca. 25.000 h (lumen maintenance 70 %) - Ergonomic operation integrated in housing: no controller box needed - Encoder 1 for setting of segment modes, turning in 45° steps and auto rotation - Encoder 2 for dimming, storage and recall of one illumination setting - Separate On/Off switch - Segment modes: full, half, quarter circle, two opposite quarter circles - Interface to objective: D=66 mm - ESD socket for controlled discharge of electrostatic load - Thread to mount accessories (Polarization Filter Set, Diffusor) - incl. wide-range power supply and 4 adapters EU, US, CH, JP

Transmitted-light illumination

Item has been added to the configuration

Transillumination base 300

Recover

Item no.: 435533-9500-000

Transillumination base 300

Item Number: 435533-9500-000

Transillumination base 300 WxDxH 322x373x42mm stand base with 2x M8 threaded holes, 90 white-light LED transmitted light, brightness knob, socket for footswitch S, straightly movable diaphragm and 3 position turret for: 1. Bright Field plus and oblique-light contrast by shiftable diaphragm 2. homogenous bright field with 67mm dia. 3. all-side dark field, also unilateral by movable diaphragm; incl. glass plate D=120mm, DF insert diaphragm 28/84, table-top supply 24V 60W and country-specific mains cord; compatible to T column 350mm and central profile column 490mm; stage d=84mm or d=120mm needs additionally adapter 84+120 (435533-9510) except gliding stage S 110x110

Item has been added to the configuration

Transilluminator Brightfield M LED

Recover

Item no.: 435525-9130-000

Transilluminator Brightfield M LED

Item Number: 435525-9130-000

Transilluminator Brightfield M LED - Flat LED transillumination for brightfield and all-sided darkfield, switchable - Integrable into stand M LED, without increasing height of the stand - Easy to assemble, wireless

Item has been added to the configuration

Transillumination Unit M LED

Recover

Item no.: 435525-9100-000

Transillumination Unit M LED

Item Number: 435525-9100-000

Transillumination Unit M LED - Lower part for stand M LED D340xW300xH58 mm - LED transillumination base with rotatable and slidable mirror for brightfield, darkfield and oblique transillumination - Plain mirror side for crisp, diffuse mirror side for homogenuous illumination - Easy to assemble under stand M LED, wireless

Item has been added to the configuration

Transmitted-light equipment S

Recover

Item no.: 435501-0000-000

Transmitted-light equipment S

Item Number: 435501-0000-000

Transmitted-light equipment S ergonomic console with light guide and 2 shiftable and tiltable reflectors for bright field/dark field and for variable oblique light, usable on stand base 450

Item has been added to the configuration

EasyLED transillumination H, D=84 mm (D)

Recover

Item no.: 417096-9400-000

EasyLED transillumination H, D=84 mm (D)

Item Number: 417096-9400-000

EasyLED transillumination H, D=84 mm (D) - bright field with D=50 mm - dimmer and on/off switch integrated - plug-in power unit 12V DC incl. mains input plug EU, GB, US/JP, AU

Item has been added to the configuration

VisiLED transillumination H, D=84 mm (D)

Recover

Item no.: 417095-9400-000

VisiLED transillumination H, D=84 mm (D)

Item Number: 417095-9400-000

VisiLED transillumination H, D=84 mm (D) for homogeneous bright field with dia. 50 mm and high illumination intensity

Stemi analyzer

Item has been added to the configuration

Analyzer S, rotatable, d=66 mm

Recover

Item no.: 435530-0000-000

Analyzer S, rotatable, d=66 mm

Item Number: 435530-0000-000

Analyzer S, rotatable, d=66 mm

Vertical illumination

Item has been added to the configuration

Vertical illuminator S, d=66mm, adjustable

Recover

Item no.: 435505-9000-000

Vertical illuminator S, d=66mm, adjustable

Item Number: 435505-9000-000

Vertical illuminator S, d=66mm, adjustable recommended to illuminate sample depressions and to assemble on 0.63x or 1.0x Discovery objective, FWD is reduced by 20mm, additionally flexible light guide 1500, 5/1000mm (417075-9100) is required

Various lamp accessories

Item has been added to the configuration

Clear glass plate, D=120 mm

Recover

Item no.: 435501-0002-000

Clear glass plate, D=120 mm

Item Number: 435501-0002-000

Clear glass plate, D=120 mm

Item has been added to the configuration

Spacing ring S, d=66 x 40 mm

Recover

Item no.: 435449-0000-000

Spacing ring S, d=66 x 40 mm

Item Number: 435449-0000-000

Spacing ring S, d=66 x 40 mm elongates the diam. 66 mm objective barrel by 40 mm, e.g. for mounting of dark-field ring illuminator on Discovery objective Achromat 1x or 1.25x or Plan Apo 1x or twice used on Achromat 0.63x

Item has been added to the configuration

Spacing ring S, d=66 x 57 mm

Recover

Item no.: 435448-0000-000

Spacing ring S, d=66 x 57 mm

Item Number: 435448-0000-000

Spacing ring S, d=66 x 57 mm elongates the diam. 66 mm objective barrel by 57 mm, e.g. for mounting of dark-field ring illuminator on Discovery objective Plan 1x or Plan Apo 0.63x or twice used on Achromat 0.5x

Item has been added to the configuration

Steel base M8+M6, 100mm dia. (D)

Recover

Item no.: 435446-9020-000

Steel base M8+M6, 100mm dia. (D)

Item Number: 435446-9020-000

Steel base M8+M6, 100mm dia. (D)

Item has been added to the configuration

Clamping ring 2x M8 to column 32

Recover

Item no.: 435444-0000-000

Clamping ring 2x M8 to column 32

Item Number: 435444-0000-000

Clamping ring 2x M8 to column 32

Item has been added to the configuration

Illuminator carrier S, M8-M8 (D)

Recover

Item no.: 435441-0000-000

Illuminator carrier S, M8-M8 (D)

Item Number: 435441-0000-000

Illuminator carrier S, M8-M8 (D)

Item has been added to the configuration

Spacing rod S

Recover

Item no.: 435440-0000-000

Spacing rod S

Item Number: 435440-0000-000

Spacing rod S

Item has been added to the configuration

Spacing ring M62, d=66x16 mm

Recover

Item no.: 435307-0000-000

Spacing ring M62, d=66x16 mm

Item Number: 435307-0000-000

Spacing ring M62, d=66x16 mm required with 435506 ring illuminator and PlanApo Z 0.5x or Achromat S 0.3x/0.5x/0.63x/1.0x in -9901 version with M62

Item has been added to the configuration

Dark-field ring for slim VisiLED (D)

Recover

Item no.: 417095-9810-000

Dark-field ring for slim VisiLED (D)

Item Number: 417095-9810-000

Ring mirror f10 for VisiLED Slim (D) FWD 5-20 mm for gray and dark field, suited as incident illumination for objectives 2.3x

Item has been added to the configuration

Power supply 100...240V, 50...60Hz (D)

Recover

Item no.: 417095-9050-000

Power supply 100...240V, 50...60Hz (D)

Item Number: 417095-9050-000

Power supply 100...240V, 50...60Hz (D) for VisiLED

Item has been added to the configuration

Foot button S (D)

Recover

Item no.: 417095-9020-000

Foot button S (D)

Item Number: 417095-9020-000

Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300

Item has been added to the configuration

Multiple Controller MC 1500 for VisiLED (D)

Recover

Item no.: 417095-9000-000

Multiple Controller MC 1500 for VisiLED (D)

Item Number: 417095-9000-000

Multiple Controller MC 1500 for VisiLED (D) for 2 VisiLED illuminators, foot switch and RS232 adapter, with 5 segment modes, 4 memory keys, continuous dimming and integrated LED temperature control

Item has been added to the configuration

Stand base for KL 200/300 LED (D)

Recover

Item no.: 417084-9010-000

Stand base for KL 200/300 LED (D)

Item Number: 417084-9010-000

Stand base for KL 200/300 LED (D) incl. mounting bracket and cast iron base

Item has been added to the configuration

Diffusor HPRL (D)

Recover

Item no.: 417040-9310-000

Diffusor HPRL (D)

Item Number: 417040-9310-000

Diffusor HPRL (D) - Provides diffuse, soft illumination - To observe glary object parts in natural colors and without hot spot reflexions - Thread to mount at HPRL Ring illuminator

Stand with power supply

Item has been added to the configuration

Stand M LED

Recover

Item no.: 435425-9100-000

Stand M LED

Item Number: 435425-9100-000

Stand M LED - Stand base D340xW300xH35 mm - Working surface W255xD215 mm - Interfaces d=84 mm for stages and d=45 mm for TL polarizer - Central through-hole 40 mm - Column 360 mm with drive, lifting range 190 mm - Stemi mount d=76 mm, load capacity 5 Kg, adjustable friction - Transillumination units M LED retrofittable - 2x sockets for IVI and illuminator K LED - Separate RL/TL controls: 2x rotary push knob for on/off/dimming - 3x Memory button to save/recall three mixed light settings: Save: Long press (2 sec), call: Short press Saves: Currently set values (on/off, brightness) of RL/TL illuminators K/M LED Does not save: Mechanical adjustment of lighting and segment setting and rotation of ring illuminator K LED - Integrated power unit 12V DC 24W/100...240V AC/50...60Hz Additionally included: - Glass and B/W plastic plate D=84x5 mm - Country-specific power cable EURO C8 - Dust cover

Stemi carrier, Greenough

Item has been added to the configuration

Stemi Mount Column 32 with Drive

Recover

Item no.: 435424-9301-000

Stemi Mount Column 32 with Drive

Item Number: 435424-9301-000

Stemi Mount Column 32 with Drive - Lifting range +/- 25 mm, load capacity max. 5 kg - 2x M8 thread for adaptation of illuminator carriers - Adjustable ease of motion by twisting the knobs

Coupling device for non-Zeiss stands

Item has been added to the configuration

Tilting Head B 32/115 mm

Recover

Item no.: 435424-9210-000

Tilting Head B 32/115 mm

Item Number: 435424-9210-000

Tilting Head B 32/115 mm - Lever handle for tool-free tilting - Safety stop at column end

Item has been added to the configuration

Tilting head 32/115 for floor stand

Recover

Item no.: 435413-8202-000

Tilting head 32/115 for floor stand

Item Number: 435413-8202-000

Tilting head 32/115 for floor stand - Tilting head with column 32/115 for adaptation of a Stemi mount - Coupling to floor stand S and MED stands, with safety cover - Clamping lever for locking the tilt angle - End piece for securing the Stemi mount

Other stands

Item has been added to the configuration

Mounting Set Boom Stand B

Recover

Item no.: 435424-9200-000

Mounting Set Boom Stand B

Item Number: 435424-9200-000

Mounting Set Boom Stand B - Tilting head B 32/115 mm - Adapter B 32-BMS 90° - Crosspiece B 32 - Safetyring B 32

Item has been added to the configuration

Stand U with Articulated Suspension Arm (D)

Recover

Item no.: 435414-9000-000

Stand U with Articulated Suspension Arm (D)

Item Number: 435414-9000-000

Stand U with Articulated Suspension Arm (D) - Table attachment device U 210 mm - Table clamp U (5...75 mm table thickness) - Articulated suspension arm U 580 mm with rotary knob for height locking (lifting range 500 mm, carrying capacity 2…4.8 Kg) - Adapter for tilting head B 32/115 mm - Console U for cold-light sources 1500/2500/4500/6000/9000

Item has been added to the configuration

Floor Stand S

Recover

Item no.: 435413-9000-000

Floor Stand S

Item Number: 435413-9000-000

Floor Stand S - Portable and stable floor stand with four freely movable and lockable wheels - Tilting head B 32/115 mm - Console for cold light sources 1500/4500/6000/9000 - Radius of Traverse with articulated suspension arm: 500+600 mm - Height adjustment: +/- 300 mm - Payload: 2.5...7 kg - Total height (with foot base): 1730 mm - Foot base dimensions: 650 x 625 mm - Weight (w/o microscope): approx. 82 kg

Item has been added to the configuration

Traverse U 35/320 mm (D)

Recover

Item no.: 000000-1222-246

Traverse U 35/320 mm (D)

Item Number: 000000-1222-246

Traverse U 35/320 mm (D)

Item has been added to the configuration

Wall mount for stand U (D)

Recover

Item no.: 000000-1222-243

Wall mount for stand U (D)

Item Number: 000000-1222-243

Wall mount for stand U (D) (Use of U-console requires the traverse U)

Objective mount

Item has been added to the configuration

Rings for nosepiece 6x cod + objective mono

Recover

Item no.: 435306-9000-000

Rings for nosepiece 6x cod + objective mono

Item Number: 435306-9000-000

Rings for nosepiece 6x cod + objective mono M40/M60 ring provides parfocality of Plan Apo S 3.5x mono with Achromat S 1.0x / 1.25x / 1.5x on nosepiece and the d=66x45 mm sleeve supports d=66 mm accessories

Item has been added to the configuration

Intermediate rings for objective S mono

Recover

Item no.: 435304-0000-000

Intermediate rings for objective S mono

Item Number: 435304-0000-000

Intermediate rings for objective S mono for mounting at objective slider

Item has been added to the configuration

Objective nosepiece S, coax 3x2 cod

Recover

Item no.: 435303-9000-000

Objective nosepiece S, coax 3x2 cod

Item Number: 435303-9000-000

Objective nosepiece S, coax 3x2 cod for stereo and axial mode with 3 objectives on SteREO Discovery, switchable coaxial epi-illumination incl. light guide 1500, 2x 4.5/1000mm, to mount at focus drive with profile column as an alternative of 435402 carrier S or 435116 co-observer equipment

Item has been added to the configuration

Objective nosepiece S/doc, 3fold, 6x cod

Recover

Item no.: 435302-0000-000

Objective nosepiece S/doc, 3fold, 6x cod

Item Number: 435302-0000-000

Objective nosepiece S/doc, 3fold, 6x cod for stereo and axial mode using 3 objectives on SteREO Discovery, to mount at focus drive with Profile S column as an alternative of 435402 carrier S, d=76 mm or 435116 co-observer equipment

Item has been added to the configuration

Objective slider S /doc (D)

Recover

Item no.: 435301-0000-000

Objective slider S /doc (D)

Item Number: 435301-0000-000

Objective slider S /doc (D) on SteREO Discovery for vertical imaging through right (axial mode) or left channel with one tandem mono or one stereo objective and for stereo observation with last mentioned one in central position of slider

Item has been added to the configuration

Coaxial epi-illumination S

Recover

Item no.: 435112-0000-000

Coaxial epi-illumination S

Item Number: 435112-0000-000

Coaxial epi-illumination S mountable at mount S with diam. 76 mm support (435402), recommended for objective Plan Apo S 1,0x (435203), further combinations of objectives S >=1,0x and eyepieces possible

Camera adapter

Item has been added to the configuration

Intermediate phototube S mot, right 100/100

Recover

Item no.: 435118-0000-000

Intermediate phototube S mot, right 100/100

Item Number: 435118-0000-000

Intermediate phototube S mot, right 100/100 motorized alternation per CAN command or push button between 100% light for camera or 100% for right eye; power supply by CAN distributor or plug-in supply RJ45-CAN via its 2 sockets; incl. 2 cables 0.5m and 1m

Item has been added to the configuration

Intermediate phototube S, left 100/100

Recover

Item no.: 435108-9901-000

Intermediate phototube S, left 100/100

Item Number: 435108-9901-000

Intermediate phototube S, left 100/100 compatible with co-observer equipment S

Stemi Antiflex caps

Item has been added to the configuration

Lambda/4 Cap S, d=66 mm

Recover

Item no.: 435112-9010-000

Lambda/4 Cap S, d=66 mm

Item Number: 435112-9010-000

Lambda/4 Cap S, d=66 mm for objectives S or Z, D=66 mm, reduces FWD by 7 mm; required to coaxial epi-illuminator S working in axial mode or to Epi-illuminator Z if specular samples are existing

Drawing devices

Item has been added to the configuration

Drawing intermediate tube S, switchable

Recover

Item no.: 435111-0000-000

Drawing intermediate tube S, switchable

Item Number: 435111-0000-000

Drawing intermediate tube S, switchable for stereoscopic viewing on specimen or for binocular 2D viewing of specimen and drawing

TV/camera adapters

Item has been added to the configuration

Intermediate phototube with 2 ports 50:50

Recover

Item no.: 435109-9901-000

Intermediate phototube with 2 ports 50:50

Item Number: 435109-9901-000

Intermediate phototube with 2 ports 50:50

Phototubes

Item has been added to the configuration

Intermediate phototube S, right 50:50/0:100/100:0

Recover

Item no.: 435103-9000-000

Intermediate phototube S, right 50:50/0:100/100:0

Item Number: 435103-9000-000

Intermediate phototube S, right 50:50/0:100/100:0 provides together with binocular tube S in stereo mode: - stereo observation by 50% of brightness and 50% from right channel to camera simultaneously or - 100% from right channel to camera and 100% from left channel to left eye or - 0% to camera and stereo observation by 100% of brightness

Computer and accessories (4)

Various computer accessories

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language English US (O)

Recover

Item no.: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item Number: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item has been added to the configuration

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Recover

Item no.: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Item Number: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O) Cable, High-Speed-HDMI-Cable, Premium, Resolution 4K, HDMI connector A to HDMI connector A, black, 2m

Item has been added to the configuration

Mouse, Optical USB-Scroll Mouse (O)

Recover

Item no.: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item Number: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language German (O)

Recover

Item no.: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Item Number: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Connecting cables (1)

Remote lamp control cable

Item has been added to the configuration

Trigger cable for HXP C light source (D)

Recover

Item no.: 000000-0485-260

Trigger cable for HXP C light source (D)

Item Number: 000000-0485-260

Trigger cable for HXP C light source (D) one side D-Sub 9 for connection to HXP C, other side BNC. Incl. BNC coupling for connection to trigger cable set AxioCam, Trigger Board for Fast Acquisition or Colibri.

Control devices (4)

Cables, control unit

Item has been added to the configuration

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Recover

Item no.: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D)

Item Number: 432929-9030-000

Motor cable XY SMC 2009 D-Sub/2x Maerzhaeuser round plug (D) 2 m length

Motor control units

Item has been added to the configuration

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Recover

Item no.: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Item Number: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D) Control unit for Maerzhaeuser XY-Stages with stepper motors. The modular system contents of the following components: - System base with power supply 230V / 110V, autoswitching - RS-232 host computer interface module incl. serial interface cable - two stepper motor controller modules for X- and Y-axes - Joystick for two axes - two motor cable for Maerzhaeuser stages with stepper motors - adapter for Maerzhaeuser stages with fixed motor cable

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Micromanipulation injection (4)

PECON devices

Item has been added to the configuration

Supplementary pre-heating plate

Recover

Item no.: 471841-9902-000

Supplementary pre-heating plate

Item Number: 471841-9902-000

Supplementary pre-heating plate - dimensions: 210x160x15 mm - temperature range of 3°C above room temperature up to +60°C

Item has been added to the configuration

Tempcontrol 37 (1 channel)

Recover

Item no.: 000000-1116-057

Tempcontrol 37 (1 channel)

Item Number: 000000-1116-057

Tempcontrol 37 (1 channel)

Item has been added to the configuration

Supplementary pre-heating plate with 3 inserts

Recover

Item no.: 000000-1116-049

Supplementary pre-heating plate with 3 inserts

Item Number: 000000-1116-049

Supplementary pre-heating plate with 3 inserts - dimensions: 250x400x16 mm - temperature range of 3°C above room temperature up to +60°C

Narishige devices

Item has been added to the configuration

Magnetic base TSA-Z (D)

Recover

Item no.: 411831-9120-000

Magnetic base TSA-Z (D)

Item Number: 411831-9120-000

Magnetic base TSA-Z (D) consisting of low magnetic base suitable on ferromagnetic plate 450 and of double-railed adapter for mounting of 2 pcs. Narishige manipulators

Image processing (97)

Camera accessories

Item has been added to the configuration

Wi-Fi adapter package (O)

Recover

Item no.: 426570-9110-000

Wi-Fi adapter package (O)

Item Number: 426570-9110-000

Wi-Fi adapter package (O) consisting of Wireless Network Adapter and USB Adapter USB Type-C to Type-A Technical specification: Frequency: 2.4 GHz Transmission: 400 Mbps Antenna: Built-in 2dBi Transmit power: 18 dBm Interface: USB 3.0 Standard: IEEE802.11a/b/g/n

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 mono R2 (D)

Recover

Item no.: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D)

Item Number: 426560-9091-000

Microscopy Camera Axiocam 712 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live FrameRates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 712 color (D)

Recover

Item no.: 426560-9080-000

Microscopy Camera Axiocam 712 color (D)

Item Number: 426560-9080-000

Microscopy Camera Axiocam 712 color (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1" (diagonal 17.5 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 2048 x 1504 30 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Adjustable color saturation White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3" x 3.2" x 1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.1 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)>0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 mono R2 (D)

Recover

Item no.: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D)

Item Number: 426560-9061-000

Microscopy Camera Axiocam 705 mono R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius GlobalShutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25.000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,4") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photothread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 color R2 (D)

Recover

Item no.: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D)

Item Number: 426560-9051-000

Microscopy Camera Axiocam 705 color R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter (coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Color filter array Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution (color and monochrome): H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rate: (1 ms exposure, default setting Fast Mode) H x V Frame Rate (fps) 1232 x 1028 30 Frame Ratesfor TimeSeries Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot-meter), adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3" x 3.2" x 2,0") / 580 g Housing: Blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Digital Microscopy Camera Axiocam 305 color R2 (D)

Recover

Item no.: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D)

Item Number: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 702 mono (D)

Recover

Item no.: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D)

Item Number: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D) High performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1920 (H) x 1216 (V) = 2.3 Mega Pixels Pixel size: 5.86 µm x 5.86 µm Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2" (13.3 mm diagonal) Spectral range: With protection glass app. 350 nm to 1000 nm Quantum Efficiency 72% at 520 nm (including sensor cover slip) Max. Full Well Capacity: Approx. 32.000 e Selectable Resolution: H x V Binning Faktor (digital) 1920 x 1216 1x1 basic pixel count 960 x 608 2x2 640 x 404 3x3 480 x 304 4x4 384 x 240 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms, H x V Frame Rate 1936 x 1460 >100 fps Frame rates for time series recording (depending on computer hardware and software configuration) H x V Frame Rate 1920 x 1216 128 1920 x 1080 145 960 x 612 245 480 x 306 458 384 x 244 557 1280 x 112 982 1024 x 112 1003 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit (internal 12 Bit ADC, 14 Bit by data processing) Dynamic Range: Typical >5000 : 1 (74> dB) at typ. <(><<)> 6.e readout noise Dark current: ca. 1.1 e/p/s Integration Time: 0.1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 15°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 300 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 4.7 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 2 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Cable USB 3.0 angled 3 m (D)

Recover

Item no.: 426560-5001-000

Cable USB 3.0 angled 3 m (D)

Item Number: 426560-5001-000

Cable USB 3.0 angled 3 m (D) - One side angled for use with Axiocam 305 on stereomicroscopes with a central column - This cable cannot be used with Axiocam 5xx/7xx

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Recover

Item no.: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D)

Item Number: 426557-0100-000

Cable Dual USB 3.0/USB 2.0 angled 3 m (D) one side angled for use on Axiocam 5xx/7xx

Item has been added to the configuration

Trigger Cable Set Axiocam 5xx/7xx (D)

Recover

Item no.: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx (D)

Item Number: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Item has been added to the configuration

AxioCam Adapter for macro stand (D)

Recover

Item no.: 000000-1127-508

AxioCam Adapter for macro stand (D)

Item Number: 000000-1127-508

AxioCam Adapter for macro stand (D) incl. screw for camera fixation necessary for all macro stands with large camera base plate

Item has been added to the configuration

FireWire Cable 1394b 9pin-9pin 5 m (D)

Recover

Item no.: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Item Number: 000000-0544-791

FireWire Cable 1394b 9pin-9pin 5 m (D)

Item has been added to the configuration

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Recover

Item no.: 000000-0520-302

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Item Number: 000000-0520-302

Cable FireWire 1394 a/b 6pin-9pin 4.5m (D)

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Dutch NL (O)

Recover

Item no.: 410380-0800-000

Language Pack Dutch NL (O)

Item Number: 410380-0800-000

Language Pack Dutch NL (O) - Keyboard with Dutch layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Recover

Item no.: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O)

Item Number: 410377-0200-000

Language Package Windows 7 Ultimate Embedded x64 English US (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with english (US) layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

FireWire Cable A, 6-6 pin, 4 m with Right Angled Plug (D)

Recover

Item no.: 410361-0100-000

FireWire Cable A, 6-6 pin, 4 m with Right Angled Plug (D)

Item Number: 410361-0100-000

Cable FireWire 1394a 6pin-6pin 4 m, with right angled plug (D)

Item has been added to the configuration

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)

Recover

Item no.: 410358-0505-000

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O)

Item Number: 410358-0505-000

Network Adapter 2 x 10 GbE RJ45 (HP Z8 G5) (O) - Additional network adapter 2 x 10 GbE RJ45 (HP Z8 G5) e.g. for connection of storage systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Network Adapter 2x10 GbE RJ45 (hp Z6) (O)

Recover

Item no.: 410358-0503-000

Network Adapter 2x10 GbE RJ45 (hp Z6) (O)

Item Number: 410358-0503-000

Network Adapter 2x10 GbE RJ45 (hp Z6) (O) Additional network adapter 2x10 GbE RJ45 (hp Z6) e.g. for connection of storage systems

Item has been added to the configuration

USB 3.0 Card PCIe Quad Chip (O)

Recover

Item no.: 410358-0401-000

USB 3.0 Card PCIe Quad Chip (O)

Item Number: 410358-0401-000

USB 3.0 Card PCIe Quad Chip (O) - PCIe x4 USB 3.0 Interface U3X4-PCIE4XE101 - compatibel with PCIe x4, x8 and x16 slots - 4 separate controller chips with 4x USB 3.0 connectors - max. data transfer rate 4 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

USB 3.0 Card PCIe EX-11094 (O)

Recover

Item no.: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O)

Item Number: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O) - PCIe x1 USB 3.0 Interface EX-11094 - compatibel with PCIe x1, x4, x8 and x16 slots - Single Chip Controller with 4x USB 3.0 connectors - max. data transfer rate 1 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Recover

Item no.: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Item Number: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O) Visible diagonal: 95 cm, 21:9 curved Maximum resolution: 3840 x 1600 pixel @ 60 Hz Brightness: 300 cd/m² Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 2.0 Data connectors: 1 x USB Type C (upstream), 3 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 195 W, Typical 80 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 55.9 cm x 89.6 cm x 24.8 cm Weight incl. stand: 13.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 12 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Recover

Item no.: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Item Number: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 Pixel @ 60 Hz Brightness: 400 cd/m² Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, Thunderbolt 4.0 Data connectors: 1 x USB Type-C 5Gbps, 4 x SuperSpeed USB Type-A 5Gbps, 1 x Ethernet RJ45 1Mbps Power consumption: Maximum 180 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 60.49 cm x 71.35 cm x 21.7 cm Weight incl. stand: 9 kg Ergonomic features: Tilt: -5° to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Recover

Item no.: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Item Number: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 pixel Brightness: 350 cd/m² Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.3, 2 x HDMI 2.2 Data connectors: 1 x USB Type C (upstream), 2 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 163 W, Typical 33 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 57.6 cm x 71.7 cm x 23 cm Weight incl. stand: 11 kg Ergonomic features: Tilt: -5°to +35°, Swivel: 344°, Height adjustable 14.9 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC, TCO Operating voltage: 100-120 V / 220-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Recover

Item no.: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Item Number: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 250 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type C (upstream), 4 x SuperSpeed USB Type-A 5 Gbps Power consumption: Maximum 138 W, Typical 30 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.6 cm x 61.3 cm x 21,6 cm Weight incl. stand: 7.6 kg Ergonomic features:Tilt: -5° to +23°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Recover

Item no.: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Item Number: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Recover

Item no.: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Item Number: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O) Visible diagonal: 68.58 cm, 16:9 Max. resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 2.0 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 96 W, Typical 45 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.9 cm x 61.3 cm x 21.4 cm Weight: 8 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Recover

Item no.: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Item Number: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Recover

Item no.: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Item Number: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A2000 12 GB (O)

Recover

Item no.: 410331-3000-000

Graphics Card NVIDIA RTX A2000 12 GB (O)

Item Number: 410331-3000-000

Graphics Card NVIDIA RTX A2000 12 GB (O) Professional graphics card for Microscopy Workstation - 12 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Recover

Item no.: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O)

Item Number: 410331-2900-000

Graphics Card NVIDIA RTX A5000 24 GB DP (O) Professional graphics card for Microscopy Workstation - 24 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O)

Recover

Item no.: 410331-2400-000

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O)

Item Number: 410331-2400-000

Graphics Card NVIDIA Quadro RTX6000 24 GB DP (O) Professional graphics card for Microscopy Workstation Premium hp Z6 G4 Rev. 2 - 24 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4 (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Recover

Item no.: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Item Number: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs:3 x DisplayPort 1.4 (DP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphic Card NVIDIA Quadro P6000 24GB DP (O)

Recover

Item no.: 410331-1900-000

Graphic Card NVIDIA Quadro P6000 24GB DP (O)

Item Number: 410331-1900-000

Graphic Card NVIDIA Quadro P6000 24GB DP (O) Professional graphic card for Workstation Premium - 24 GB GDDR5X memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4 (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphic Card NVIDIA Quadro P4000 8GB DP (O)

Recover

Item no.: 410331-1800-000

Graphic Card NVIDIA Quadro P4000 8GB DP (O)

Item Number: 410331-1800-000

Graphic Card NVIDIA Quadro P4000 8GB DP (O) Professional graphic card for Workstation Premium - 8 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4 (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphic Card NVIDIA Quadro P400 2GB mDP (O)

Recover

Item no.: 410331-1700-000

Graphic Card NVIDIA Quadro P400 2GB mDP (O)

Item Number: 410331-1700-000

Graphic Card NVIDIA Quadro P400 2GB mDP (O) Professional graphic card for Workstation Premium - 2 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to three displays - Display outputs: 3 x DisplayPort 1.4 (mDP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Processor Intel Xeon W7-3455 (HP Z8 G5) (O)

Recover

Item no.: 410330-1200-000

Processor Intel Xeon W7-3455 (HP Z8 G5) (O)

Item Number: 410330-1200-000

Processor Intel Xeon W7-3455 (HP Z8 G5) (O) High performance processor configuration - Intel Xeon W7-3455 (2.5 GHz, 67.5 MB cache, 24 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Processor Intel Xeon W5-3425 (HP Z8 G5) (O)

Recover

Item no.: 410330-1100-000

Processor Intel Xeon W5-3425 (HP Z8 G5) (O)

Item Number: 410330-1100-000

Processor Intel Xeon W5-3425 (HP Z8 G5) (O) Default processor configuration - Intel Xeon W5-3425 (3.2 GHz, 30 MB cache, 12 cores) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O)

Recover

Item no.: 410324-1008-000

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O)

Item Number: 410324-1008-000

SSD 8 TB (2 x 4 TB) M.2 NVMe RAID 0, additional solid state drive (HP Z8 G5) (O) - Data storage with high performance for data handling with high bandwidth requirement - Configured as RAID 0 for further increased performance, resulting capacity 8 TB - Maximum count per workstation: 1 - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O)

Recover

Item no.: 410324-1004-000

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O)

Item Number: 410324-1004-000

SSD 4 TB M.2 NVMe, additional solid state drive (HP Z8 G5) (O) - Data storage with high performance for data handling with high bandwidth requirement - Maximum count per workstation: 1 - only for 410203-9914-000 Microscopy Workstation Premium HP Z8Fury G5

Item has been added to the configuration

Hard Drive Extension to 20TB RAID10 (HP Z8 G5)

Recover

Item no.: 410324-0020-000

Hard Drive Extension to 20TB RAID10 (HP Z8 G5)

Item Number: 410324-0020-000

Hard Drive Extension to 20TB RAID10 (HP Z8 G5) - Extension of default RAID system - Increase capacity from 10 TB (RAID 1) to 20 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O)

Item Number: 410324-0012-000

Hard Drive Extension 12TB RAID10 (hp Z6 G4 Rev. 2) (O) - Extension of default RAID system - Increase capacity from 6 TB (RAID 1) to 12 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Hard Drive Extension 8TB RAID10 (hp Z6) (O)

Recover

Item no.: 410324-0008-000

Hard Drive Extension 8TB RAID10 (hp Z6) (O)

Item Number: 410324-0008-000

Hard Drive Extension 8TB RAID10 (hp Z6) (O) - Extension of default RAID system - Increase capacity from 4 TB (RAID 1) to 8 TB (RAID 10) - Speed up write and read transfer rates - Recommended for applications generating large amount of data and / or high data transfer rates, e.g. processing of large datasets or driving detector systems at full bandwidth.

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

Harddisk 6 TB 7200 RPM SATA, additional (O)

Recover

Item no.: 410323-6000-000

Harddisk 6 TB 7200 RPM SATA, additional (O)

Item Number: 410323-6000-000

Harddisk 6 TB 7200 RPM SATA, additional (O)

Item has been added to the configuration

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Recover

Item no.: 410303-6401-000

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Item Number: 410303-6401-000

Memory 64 GB (1x64) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 64 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 256 GB (4 x 410303-6401-000), 512 GB (8 x 410303-6401-000) or 1024 GB (16 x 410303-6401-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Recover

Item no.: 410303-3206-000

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O)

Item Number: 410303-3206-000

Memory 32 GB (1x32) DDR5 4800 MHz ECC reg RAM (HP Z8 G5) (O) consisting of 1 x 32 GB module - DDR5 4800 MHz ECC registered DIMM - can be extended to 64 GB (2 x 410303-3206-000), 128 GB (4 x 410303- 3206-000) or 256 GB (8 x 410303-3206-000) - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-3205-000

Memory 32 GB (1x32) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 32 GB modules - can be extended to 64 GB (2 x 410303-3205-000), 128 GB (4 x 410303- 3205-000) or 192 GB (6 x 410303-3205-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O)

Recover

Item no.: 410303-3204-000

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O)

Item Number: 410303-3204-000

Memory 32 GB (1x32) DDR4-2666 MHz ECC registered RAM (O) consisting of 1 x 32 GB modules

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Premium (HP Z8 G5) (O)

Recover

Item no.: 410203-9914-000

Microscopy Workstation Premium (HP Z8 G5) (O)

Item Number: 410203-9914-000

Microscopy Workstation Premium (HP Z8 G5) (O) HP Z8 Fury G5 Workstation - Chipset: Intel W790 - Memory Expansion Slots: 16 x DDR5, RDIMM, ECC, 4800 MHz Modules - Memory: max. 1024 GB RAM - PCI Express Connectors: 2 x PCI Express Generation5 x16 1 x PCI Express Generation 5 x4 2 x PCI Express Generation 4 x16 2 x PCI Express Generation 4 x4 1 x PCI Express Generation 3 x8 - SSD: 1 x 2 TB M.2 NVMe - Hard Drives: 2 x 12 TB SATA 7200 rpm (configured as 10 TB RAID 1hard drive) - Network Controller: 2 x GbE LAN interface (RJ 45) - USB: 2 x USB 3.2 Gen2x2 type C (front), 8 x USB 3.1 Gen 1 type A (2 x front, 6 x rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, CCC, KCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 1450 W with country specific plug - Chassis Dimensions: (H x W x D): 445 x 216 x 555 mm - USB Mouse, Recovery kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact Intel Core-i3 multilingual (O)

Recover

Item no.: 410201-9911-000

Microscopy Workstation Compact Intel Core-i3 multilingual (O)

Item Number: 410201-9911-000

Microscopy Workstation Compact Intel Core-i3 multilingual (O) - HP Z2 G4 Workstation - CPU: Intel Core i3-8100 3.6 GHz 4 cores 4 threads - Chipset: Intel C246 - Memory: max. 64 GB RAM - Memory Expansion Slots: 4 x DDR4-RAM modules, 2666 MHz non-ECC - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Grafics card onboard: Intel UHD Grafik 630 2 x Display Port 1.2 (max. 3840 x 2160 Pixel) - SSD: 1 x 256 GB M.2 NVMe - Harddisks: 1 x 6 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface integrated - I/O: 6 x USB 3.0 Type A (2 x front, 4 x rear), 2 x USB 2.0 (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 100 - 127 V / 200 - 240 V / 50 - 60 Hz / 500 W with country specific plus - Chassis Dimensions: (H x W x D): 435 x 169 x 356 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact Core i5 multilingual (O)

Recover

Item no.: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O)

Item Number: 410201-9910-000

Microscopy Workstation Compact Core i5 multilingual (O) - HP Z240 Tower Workstation - CPU: Intel® CoreTM i5-6500 3.2 GHz 6 MB / 2133 MHz - Chipset: Intel® C236 - Memory: max. 64 GB RAM - Memory Expansion Slots: 4 x DDR3-RAM modules / 2133 MHz unbuffered, non-ECC - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 (x16 mechanical) 1 x PCI Express Generation 3 x4 1 x PCI Express Generation 3 x1 1 M.2 slot (PCIe Gen3 x4) - Graphics interface onboard: Intel® HD Graphics 530 2 x Display Port 1.2 (max. 3840 x 2160 pixel), 1 x DVI-D single link (max. 1920 x 1200 pixel) - Hard Drives: 1 x 4 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: Integrated 10/100/1000 LAN interface - I/O: 1 x serial RS232, 6 x USB 3.0 (2 x front, 4 x rear), 4 x USB 2.0 (2 x front, 2 x rear), PS/2 for keyboard and mouse - Certifications & Declarations: CE, CSA, UL, FCC - Power Supply: 100 - 240 V / 50 - 60 Hz / 400 W with country specific plug - Chassis Dimensions: (H x W x D): 399 x 170 x 442 mm, approx. 10 kg - Rescue kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-2666 MHz non-ECC unbuffered RAM (O)

Recover

Item no.: 410201-1604-000

Memory 16 GB (1x16) DDR4-2666 MHz non-ECC unbuffered RAM (O)

Item Number: 410201-1604-000

Memory 16 GB (1x16) DDR4-2666 MHz non-ECC unbuffered RAM (O) consisting of 1 x 16 GB modules - only for 410201-9911-000 Workstation Compact ZEISS 65BC (hp Z2)) - can be extended to 64 GB (4 x 410201-1604-000)

Item has been added to the configuration

System Configuration 4 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-592

System Configuration 4 for HP Z8 G5 (O)

Item Number: 000000-2615-592

System Configuration 4 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - With Installation of ZEN Software for Lightsheet Systems - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System Configuration 3 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-591

System Configuration 3 for HP Z8 G5 (O)

Item Number: 000000-2615-591

System Configuration 3 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 880 and Elyra Systems (ZEN black) - only for 410203-9914-000 Microscopy Workstation PremiumHP Z8 FuryG5

Item has been added to the configuration

System Configuration 2 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-590

System Configuration 2 for HP Z8 G5 (O)

Item Number: 000000-2615-590

System Configuration 2 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with ZEN software installation and system integration of respective system - for Celldiscoverer 7, LSM 900, LSM 980, Elyra 7, Lattice SIM, Axioscan 7, Lattice Lightsheet - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System Configuration 1 for HP Z8 G5 (O)

Recover

Item no.: 000000-2615-589

System Configuration 1 for HP Z8 G5 (O)

Item Number: 000000-2615-589

System Configuration 1 for HP Z8 G5 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410203-9914-000 Microscopy Workstation Premium HP Z8 Fury G5

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Recover

Item no.: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O)

Item Number: 000000-2360-095

System configuration 5b Windows 10 LTSB 2016 (hp Z6 R2) (O) Installation of Windows 10 Enterprise LTSB 2016 x64 Highend incl. Windows 10 license Installation of ZEN software for LSM 900, LSM 980, Elyra 7, Celldiscoverer 7 and Widefieldsystems Only for Microscopy Workstation Premium hp Z6 G4 Rev. 2 (410203-9912-000)

Item has been added to the configuration

System Configuration 1 (hp Z2 Basic) (O)

Recover

Item no.: 000000-2325-868

System Configuration 1 (hp Z2 Basic) (O)

Item Number: 000000-2325-868

System configuration 1 (hp Z2 Basic) (O) Installation of Windows 10 Enterprise LTSC 2019 x64 Value incl. Windows 10 licence

Item has been added to the configuration

System configuration 1 Image with OS for HP Z6 (O)

Recover

Item no.: 000000-2307-666

System configuration 1 Image with OS for HP Z6 (O)

Item Number: 000000-2307-666

System configuration 1 Image with OS for HP Z6 (O) Installation of Windows 10 IoT Enterprise 2016 LTSB Embedded x64 Highend Master Image incl. Windows 10 license System configuration 1 (HP Z6 Basic)

Item has been added to the configuration

Firewire ExpressCard EX-6701 (O)

Recover

Item no.: 000000-0505-420

Firewire ExpressCard EX-6701 (O)

Item Number: 000000-0505-420

Firewire ExpressCard EX-6701 (O) - for Notebook with ExpressCard slot 34/54 mm - 2 x IEEE1394B - Hot Plug and Play - Chip-Set Texas Instruments OHCI - IEEE1394 B/A adapter cable 3m 9pin/6pin

Item has been added to the configuration

Firewire HUB EX-6681/6682 (D)

Recover

Item no.: 000000-0452-376

Firewire HUB EX-6681/6682 (D)

Item Number: 000000-0452-376

Firewire HUB EX-6681/6682 (D) with power supply - IEEE 1394 and P1394 A compatible - 6 ports - Hard Plug and Play - Incl. Cable 6pin/6pin and 6pin/4pin - Country-specific power supply 110-220V / 12 V, 1 A

Item has been added to the configuration

Firewire PCMCIA Card EX-6600 E (D)

Recover

Item no.: 000000-0452-037

Firewire PCMCIA Card EX-6600 E (D)

Item Number: 000000-0452-037

Firewire PCMCIA Card EX-6600 E (D) - PCMCIA Card for Notebook - 2 x IEEE1394 - Hot Plug and Play - Chip-Set Texas Instruments OHCI

Memory

Item has been added to the configuration

Memory 32 GB (2x16) DDR3-1600 MHz ECC registered RAM (O)

Recover

Item no.: 410303-3202-000

Memory 32 GB (2x16) DDR3-1600 MHz ECC registered RAM (O)

Item Number: 410303-3202-000

Memory 32 GB (2x16) DDR3-1600 MHz ECC registered RAM (O) consisting of 2 x 16 GB modules

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Recover

Item no.: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O)

Item Number: 410201-1603-000

Memory 16 GB (1x16) DDR4-2133 MHz non-ECC unbuffered RAM (O) consisting of 1 x 16 GB module

Camera objectives

Item has been added to the configuration

APO-Rodagon-N 2.8/50 mm C-Mount (D)

Recover

Item no.: 410119-0044-000

APO-Rodagon-N 2.8/50 mm C-Mount (D)

Item Number: 410119-0044-000

APO-Rodagon-N 2.8/50 mm C-Mount (D)

Software for image processing (40)

ZEN core SMA

Item has been added to the configuration

SMA Fee ZEN core with Motorized Acquisition 1 year

Recover

Item no.: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year

Item Number: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Acquisition and all hardware- related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Item has been added to the configuration

SMA Fee ZEN analyzer 1 year

Recover

Item no.: 410139-0035-000

SMA Fee ZEN analyzer 1 year

Item Number: 410139-0035-000

SMA Fee ZEN analyzer 1 year Entitlement to upgrade ZEN analyzer free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN analyzer. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN analyzer configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band A-B") must be included: - AI Toolkit ("SMA ZEN Band B") - 2D Toolkit ("SMA ZEN Band A") - 3D Toolkit ("SMA ZEN Band A") - Connect Toolkit ("SMA ZEN Band A") - Materials Apps ("SMA ZEN Band A") - TCA Modul ("SMA ZEN Band A") - NMI Modul ("SMA ZEN Band A") - Developer Toolkit ("SMA ZEN Band A") - GxP Toolkit ("SMA ZEN Band A")

Item has been added to the configuration

SMA Fee ZEN core 1 year

Recover

Item no.: 410139-0011-000

SMA Fee ZEN core 1 year

Item Number: 410139-0011-000

SMA Fee ZEN core 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Focus Acquisition and all hardware-related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Image processing 3rd Party SW

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9 Floating License

Recover

Item no.: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License

Item Number: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.9 Floating License Note: The upgrade consists only of the ZEN analyzer 3.9 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8 Floating License

Recover

Item no.: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License

Item Number: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.8 Floating License Note: The upgrade consists only of the ZEN analyzer 3.8 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9 with Motorized Acquisition

Recover

Item no.: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition

Item Number: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.9 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8 with Motorized Acquisition

Recover

Item no.: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition

Item Number: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.8 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9

Recover

Item no.: 410138-0135-390

Upgrade to ZEN analyzer 3.9

Item Number: 410138-0135-390

Upgrade to ZEN analyzer 3.9 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.9 Note: The upgrade consists only of the ZEN analyzer 3.9 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8

Recover

Item no.: 410138-0135-380

Upgrade to ZEN analyzer 3.8

Item Number: 410138-0135-380

Upgrade to ZEN analyzer 3.8 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.8 Note: The upgrade consists only of the ZEN analyzer 3.8 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9

Recover

Item no.: 410138-0111-390

Upgrade to ZEN core 3.9

Item Number: 410138-0111-390

Upgrade to ZEN core 3.9 Upgrade of an existing ZEN core software version to ZEN core 3.9 Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8

Recover

Item no.: 410138-0111-380

Upgrade to ZEN core 3.8

Item Number: 410138-0111-380

Upgrade to ZEN core 3.8 Upgrade of an existing ZEN core software version to ZEN core 3.8 Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Transfer ZEN to ZEN core 3.9

Recover

Item no.: 410138-0011-390

Transfer ZEN to ZEN core 3.9

Item Number: 410138-0011-390

Transfer ZEN to ZEN core 3.9 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.9 Consisting of: - ZEN core 3.9 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.8

Recover

Item no.: 410138-0011-380

Transfer ZEN to ZEN core 3.8

Item Number: 410138-0011-380

Transfer ZEN to ZEN core 3.8 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.8 Consisting of: - ZEN core 3.8 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

ZEN Module Data Management

Item has been added to the configuration

Upgrade ZEN Data Explorer Viewer

Recover

Item no.: 410138-0931-360

Upgrade ZEN Data Explorer Viewer

Item Number: 410138-0931-360

Upgrade ZEN Data Explorer Viewer Conversion of an existing ZEN Data Storage Server License (Version 22.40 or older) into a license compatible with version 23.xx (or higher). The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. The newly integrated viewer, based on server side rendering, significantly enhances the display performance which is mainly reflected in the fast display of large and very large image files. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version: 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android Version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

Item has been added to the configuration

ZEN Data Storage Server

Recover

Item no.: 410135-0031-360

ZEN Data Storage Server

Item Number: 410135-0031-360

ZEN Data Storage Server Database for storage and multi-client access of documents on a centralized server. ZEN applications can connect to the server as clients to store and retrieve data. ZEN Data Storage provides a client-server database solution for microscopy customers who deal with the storage of large amounts of data originating from one or several microscopes. ZEN Data Storage allows the exchange of data and workflows and supports microscopists who want to separate image acquisition from post-acquisition work. In this way it also facilitates correlative workflows where the data of a sample can be accessed from a centralized location. "Server side rendering" based display enables the user to visualize also very large files in a fast and seamless way. The centralized ZEN Data Storage enables IT managers to ensure data security and backup availability. It allows to manage users and user rights within a laboratory or even across multiple sites. Main features: - Scalable server database solution based on MS-SQL server - Integration into existing server landscape possible - Multi-client concurrent access to data - Server based user and access management - Integration of user management with Active Directory possible - Data access management on user and group level (ZEN blue only) - Full archive integration for ZEN core including storage of documents and templates - Optional: Compatible with ZEN Module GxP in ZEN core The package includes: ZEN Data Explorer - browser or app based client which allows access and viewing of the data stored on the ZEN Data Storage. Main features: - Gallery for browsing, grouping and searching of data - Viewer for images and ZEN Connect projects - Basic annotation functionality - Upload of images and camera snapshots (app version only) - Download and Snapshot functionality - Available in Browser or as app for iOS and Android ZEN Data Storage Uploader - upload tool which monitors a drop folder and uploads and if needed converts the files to CZI. Supported files types CZI, ZVI, Leica LIF, Nikon ND2, Olympus TIF, PDF The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

ZEN core Platform change

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.9

Recover

Item no.: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9

Item Number: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.9. Consisting of: - ZEN core 3.9 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.8

Recover

Item no.: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8

Item Number: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.8. Consisting of: - ZEN core 3.8 basic license - entitles to purchase ZEN Toolkits with a discount

ZEN Basic Software

Item has been added to the configuration

ZEN Toolkit 3D Floating License

Recover

Item no.: 410136-2172-360

ZEN Toolkit 3D Floating License

Item Number: 410136-2172-360

ZEN Toolkit 3D Floating License This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer Floating License

Recover

Item no.: 410136-2171-360

ZEN Toolkit Developer Floating License

Item Number: 410136-2171-360

ZEN Toolkit Developer Floating License Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Connect Floating License

Recover

Item no.: 410136-2170-360

ZEN Toolkit Connect Floating License

Item Number: 410136-2170-360

ZEN Toolkit Connect Floating License This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy* - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*motorized stage required) (**not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 2D Floating License

Recover

Item no.: 410136-2168-360

ZEN Toolkit 2D Floating License

Item Number: 410136-2168-360

ZEN Toolkit 2D Floating License Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze imagedata. The wizard provides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally to classical segmentation methods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. After running the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belonging to the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit GxP Floating License

Recover

Item no.: 410136-2163-350

ZEN Toolkit GxP Floating License

Item Number: 410136-2163-350

ZEN Toolkit GxP Floating License The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process Floating License allows the flexible usage of the license on different clients within a networkenvironment.

Item has been added to the configuration

ZEN Toolkit Materials Apps Floating License

Recover

Item no.: 410136-2162-350

ZEN Toolkit Materials Apps Floating License

Item Number: 410136-2162-350

ZEN Toolkit Materials Apps Floating License This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximumdiameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 63942002 - Non-metallic inclusions (NMI): ISO4967:2013; GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004 Floating License allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.5 Floating License

Recover

Item no.: 410135-2035-350

ZEN analyzer 3.5 Floating License

Item Number: 410135-2035-350

ZEN analyzer 3.5 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - APEER (on-site) connectorenables the execution of customized solutions by integrating modules from the APEER platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN starter basic software (O)

Recover

Item no.: 410135-1010-000

ZEN starter basic software (O)

Item Number: 410135-1010-000

ZEN starter basic software (O) ZEN starter with basic functionality and user interface of ZEN core. Drivers for Axiocam cameras and image acquisition (SNAPs). No microscope control. - Configurable graphical user interface including workbench concept - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - Panorama for acquisition of Tiles Images with manual stage - Online Panorama for creation of stitched images on un-coded/ un- motorized stages - Video recorder functionality with movie export functionality - Manual Extended Focus (EDF) capability - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements and text annotations - Using of Microsoft Word report templates - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - Can only be extended with ZEN Toolkit Basic Acquisition and ZEN Module Coded Microscope Differences compared with ZEN core: - No microscope control - Limited image processing functions - No Job functionality - No HDR -Acquisition of High Dynamic Range Images Supported operating systems: Windows 10 (64-Bit)

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI Floating License

Recover

Item no.: 410136-2169-380

ZEN Toolkit AI Floating License

Item Number: 410136-2169-380

ZEN Toolkit AI Floating License Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN andZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative toan own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. The floating license allows the flexible use of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer

Recover

Item no.: 410136-0171-360

ZEN Toolkit Developer

Item Number: 410136-0171-360

ZEN Toolkit Developer Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated workflows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core)

Item has been added to the configuration

ZEN Toolkit GxP

Recover

Item no.: 410136-0163-350

ZEN Toolkit GxP

Item Number: 410136-0163-350

ZEN Toolkit GxP The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process.

ZEN Module Image Analysis

Item has been added to the configuration

ZEN Toolkit 3D

Recover

Item no.: 410136-0172-360

ZEN Toolkit 3D

Item Number: 410136-0172-360

ZEN Toolkit 3D Unlock the full 3D potential with the Toolkit 3D. Equip yourself with a collection of rendering methods, tools for sophisticated visualization and data navigation as well as 3D image analysis. The 3D Toolkit offers multiple types of rendering methods allowing you to choose the visualization that best fits your application. A sophisticated 3D rendering can be overwhelming when exploring a data set. With the viewer available with ZEN 3D Toolkit, 3D and 2D views are placed side-by-side so you may navigate in the 3D space seamless through your sample. Analyze your 3D data – a user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Segmentation is AI-ready: load your Intellesis models or segment object based on thresholding. The resulting objects are visualized in 3D in glass or opaque mode. The measurements include various geometric and intensity measurements, as well as user-defined measurement parameters* which can be sorted and exported. The 3D viewer requires a dedicated up-to-date graphics card with full OpenGL 4.3+ support. Older AMD graphic cards such as AMD FirePro V4900 1GB or ATI FirePro V5800 1GB are not supported any longer. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit 2D

Recover

Item no.: 410136-0168-360

ZEN Toolkit 2D

Item Number: 410136-0168-360

ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.

ZEN modules image acquisition

Item has been added to the configuration

ZEN Toolkit Connect

Recover

Item no.: 410136-0170-360

ZEN Toolkit Connect

Item Number: 410136-0170-360

ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Smart Acquisition

Recover

Item no.: 410136-0167-360

ZEN Toolkit Smart Acquisition

Item Number: 410136-0167-360

ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).

Item has been added to the configuration

ZEN Toolkit Materials Apps

Recover

Item no.: 410136-0162-350

ZEN Toolkit Materials Apps

Item Number: 410136-0162-350

ZEN Toolkit Materials Apps This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximum diameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 6394 2002 - Non-metallic inclusions (NMI): GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004

ZEN drivers

Item has been added to the configuration

ZEN Software Driver Linkam

Recover

Item no.: 410136-0044-350

ZEN Software Driver Linkam

Item Number: 410136-0044-350

ZEN Software Driver Linkam Module to control Linkam Single-Element Heating/Freezing Stages and Vacuum option - Setup of temperature curves with individually defined temperature ramps - Acquisition of time series or temperature series - 5-point temperature calibration - Automatic logging and graphic representation of temperature- and vacuum data - Simultaneous presentation of temperature curve and temperature/time series - T95/T96-LinkPad and PE95/PE96-LinkPad controller supported

ZEN core base software

Item has been added to the configuration

ZEN analyzer 3.9 Floating License

Recover

Item no.: 410135-2035-390

ZEN analyzer 3.9 Floating License

Item Number: 410135-2035-390

ZEN analyzer 3.9 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.8 Floating License

Recover

Item no.: 410135-2035-380

ZEN analyzer 3.8 Floating License

Item Number: 410135-2035-380

ZEN analyzer 3.8 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.9

Recover

Item no.: 410135-0035-390

ZEN analyzer 3.9

Item Number: 410135-0035-390

ZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.8

Recover

Item no.: 410135-0035-380

ZEN analyzer 3.8

Item Number: 410135-0035-380

ZEN analyzer 3.8 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN core 3.9

Recover

Item no.: 410135-0011-390

ZEN core 3.9

Item Number: 410135-0011-390

ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN core 3.8

Recover

Item no.: 410135-0011-380

ZEN core 3.8

Item Number: 410135-0011-380

ZEN core 3.8 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Smartproof 5 and Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components. - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Packing and dust protection (6)

Dust covers

Item has been added to the configuration

Dust cover K L300xW190xH500 mm

Recover

Item no.: 459325-0000-000

Dust cover K L300xW190xH500 mm

Item Number: 459325-0000-000

Dust cover K L300xB190xH500 mm

Item has been added to the configuration

Dust cover G L570xW135xH650 mm

Recover

Item no.: 459306-0000-000

Dust cover G L570xW135xH650 mm

Item Number: 459306-0000-000

Dust cover G L570xW135xH650 mm

Item has been added to the configuration

Dust cover K L300xW190xH400 mm

Recover

Item no.: 459300-0000-000

Dust cover K L300xW190xH400 mm

Item Number: 459300-0000-000

Dust cover K L300xW190xH400 mm

Item has been added to the configuration

Dust protection Set L

Recover

Item no.: 434304-0000-000

Dust protection Set L

Item Number: 434304-0000-000

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm

Item has been added to the configuration

Dust protection Set M

Recover

Item no.: 434303-0000-000

Dust protection Set M

Item Number: 434303-0000-000

Dust protection Set M consisting of dust cover (L650xW200xH570 mm), eyepiece cover and protection cap for luminous-field diaphragm optics

Item has been added to the configuration

Protection cap set

Recover

Item no.: 434302-0000-000

Protection cap set

Item Number: 434302-0000-000

Protection cap set consisting of eyepiece cover and protection cap for luminous-field diaphragm optics

Stereomicroscope SteREO Discovery.V12 with focus motor and without illumination