Microscope Axioscope 5

Microscope stand Axioscope 5, TL/FL, 6xH DIC encoded - lower stand part with dovetail illumination interface - transmitted-light illumination with white LED 10W, optional for HAL 100W - dovetail mount for attachable stage carriers - 24 mm focus lift, adjustable focus stop - auto mechanical safety shutter - 6-position filter wheel for dia. 36 mm filters - mount for 2-position filter slider 14x40, d=36 mm - CAN port for Colibri/HXP - integrated 24V DC 60W power unit, stabilized 100...240V AC/ 50...60Hz - country-specific power cable - ECO mode and light management control button - snap button supports on ZEISS Axiocam - USB 2.0 to PC - dust cover - filter holder in TL - upper stand part with dovetail interface for reflected illumination HAL 100 /HBO /HXP /Colibri - nosepiece 6xH DIC,M27, encoded - dovetail mount for coded changeable reflector turrets and reflector slider - mount for luminous-field diaphragm slider - mount for aperture stop slider or FL attenuator - mount for adjusting aid for HBO/XBO - mount for filter slider R, 14x40 mm d=25mm

Stage carrier D/A; attachable and vertically adjustable for Axioscope, to accommodate screw-on stages

Condenser carrier with vertical adjustment on both sides for use with attachable Axio Scope stage carriers, adjustable height stop

Reflector turret 4x encoded, changeable, for P & C modules

Antiglare screen

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Mechanical stage 75x50 R with hardcoat anodized surface 220 x 170 mm stage plate, rackless X-guide positioned at bottom, hidden gear in Y-guide, right drive 135 mm (extendable by 15 mm), with friction setting

Specimen holder for two slides 76x26mm, spring lever left

Binocular phototube 30°/23 (100:0/0:100), reversed image with sliding prism, low-vibration prism switch. Camera port with interface 60N

Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40

Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70

Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50

Camera Adapter 60N-C 2/3" 0.63x

Eyepiece PL 10x/23 Br. foc.

Eyepiece eyecup

Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Condenser, achromatic-aplanatic 0.9 H D Ph DIC with front lens switchable on the left and right. 5-position modulator disk. 4 centerable positions with Ph1, Ph2, Ph3 and dark-field stop 0.75. 1 bright-field position with aperture stop. Alternative use of up to 4 DIC prisms / slit-diaphragms PlasDIC possible instead of the Ph/D stops. For objectives 1.0-100x, WD=1.0mm

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.