Inverted microscope Axio Vert.A1

Microscope stand Axio Vert.A1 - 5-position nosepiece, H DIC M27 man. (2x H, 3x H DIC) with 10x29 mm slider mount - carrier transmitted-light illumination for HAL or LED with 2-position filter slider, d=32 mm - manual coarse/fine focus drive - 13 mm focus lift with adjustable focus stop - ergonomic intermediate piece H=50 mm - integrated 12V DC 60W power unit, stabilized, 100...240V AC/50...60Hz/80VA - country-specific power cable

Illuminator HAL for Axio Vert transmitted light

Bulb 12V 37W Halogen for Axio Vert

Specimen stage 232x230 mm with hardcoat anodized surface - Object guide M mountable on both sides

Mounting frame Flex M - for microwell plates, flasks and petridishes d=95 mm - for the mounting of Mounting frame inserts Flex M

Mounting frame insert Flex M, petridishes - for petridishes d=88 mm, 65 mm, 54 mm, 36 mm - for insertion in Mounting frame Flex M

Object guide M 130x85 mm for Axio Vert - for mounting frames M - mountable on both sides without tools - 168 mm coaxial drive

Binocular tube 45°/23 - upright and unreversed image

Green filter, d=32x2 mm for contrast enhancement for phase contrast and b/w image recording

Eyepiece PL 10x/23 Br. foc.

Eyepiece eyecup

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)

Objective LD A-Plan 40x/0.55 Ph2 M27 (FWD=2.3mm at CG=1mm polystyrene)

LD condenser 0.4 for slider - for H, Ph, PlasDIC - rotatable, with click stops 0°, 90°, 180°, 270° - for objectives 5x - 63x (2.5x with diffusion disk 2.5x) - 10x46 mm slider mount - 53 mm working distance - aperture stop

Slider 10x46 mm Ph/PlasDIC, H, Ph/PlasDIC - 2 positions for Ph- or PlasDIC diaphragms - brightfield position with neutral-density filter 0.06

Phase stop Ph 1/0.4 for slider

Phase stop Ph 2/0.4 for slider

Dust protection set for Axio Vert - dust cover (L520xW240xH470 mm) - eyepiece cover