Product Search

EMCCD Camera evolve 512 delta (D) Low Light Live Cell Imaging EMCCD Monochrome Camera with FireWire / IEEE1394a interface, cable 5 m and trigger cable EMCCD image sensor: e2v CCD97 back-illuminated, frame-transfer CCD with EM gain Number of Pixels: 512 (H) x 512 (V) Pixel size: 16 µm x 16 µm Chip size: 8.2 mm x 8.2 mm Spectral range: 350 to 1050 nm Max. Full Well Capacity: Approx. 180 ke Selectable Resolution: H x V Binning Factor 64 x 64 8 x 8 128 x 128 4 x 4 256 x 256 2 x 2 512 x 512 1 x 1 Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 16 Bit / 20 MHz, 10 MHz, 5 MHz pixel clock Read noise: 75 e- rms / 20 MHz (EM gain amplifier (port #1) 45 e- rms / 10 MHz (EM gain amplifier (port #1) (Read noise effectively reduced to < 1 e- rms with EM gain enabled) 14 e- rms @ 5 MHz (Traditional amplifier (port #2)) 5 e- rms @ 0.625 MHz (Traditional amplifier (port #2)) Dark current: 0.0015 e-/p/s (typical) Integration Time: 1 µs bis 600 s Cooling: -80 °C (regulated) Control signals: TTL output for controlling of external shutters Interface: FireWire / IEEE1394 interface, 6 pin jack, cable 5 m, 400MBit/s Optical Interface: C-Mount Size / Weight: App. 14.8 cm x 13.2 cm x 16.9 cm (5.84'' x 5.2'' x 6.67'') / 3 kg Registration: CE, FCC Power Supply: AC 100 - 240 V, DC 12 V / 12.5 A, 150 W with country specific plug Environmental conditions: 0 to 35°C ambient, 0% .... 80% relative air humidity, not condensing, free air circulation required

EMCCD Camera evolve 512 (D) Low Light Live Cell Imaging EMCCD Monochrome Camera with FireWire / IEEE1394a interface, cable 5 m and trigger cable EMCCD image sensor: e2v CCD97 back-illuminated, frame-transfer CCD with EM gain Number of Pixels: 512 (H) x 512 (V) Pixel size: 16 µm x 16 µm Chip size: 8.2 mm x 8.2 mm Spectral range: 350 to 1050 nm Max. Full Well Capacity: Approx. 200 ke Selectable Resolution: H x V Binning Factor 64 x 64 8 x 8 128 x 128 4 x 4 256 x 256 2 x 2 512 x 512 1 x 1 Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 16 Bit / 10 MHz, 5 MHz, 1,25 MHz pixel clock Read noise: 45 e- rms / 10 MHz (EM gain amplifier (port #1) 32 e- rms / 5 MHz (EM gain amplifier (port #1) (Read noise effectively reduced to <1 e- rms with EM gain enabled) 12 e- rms @ 5 MHz (Traditional amplifier (port #2)) 6 e- rms @ 1.25 MHz (Traditional amplifier (port #2)) Dark current: 0.001 e-/p/s (typical) Integration Time: 1 µs bis 600 s Cooling: -85 °C (regulated) Control signals: TTL output for controlling of external shutters Interface: FireWire / IEEE1394 interface, 6 pin jack, cable 5 m, 400MBit/s Optical Interface: C-Mount Size / Weight: App. 14.7 cm x 13.0 cm x 17.5 cm (5.8'' x 5.1'' x 6.9'') / 3 kg Registration: CE, FCC Power Supply: AC 100 - 240 V, DC 12 V / 12,5 A, 150 W with country specific plug Environmental conditions: 0 to 35°C ambient, 0% .... 80% relative air humidity, not condensing, free air circulation required

EMCCD Camera QImaging Rolera em-c2 (D) Low Light Live Cell Imaging Monochrome Camera with FireWire B / IEEE1394b PCIe interface, cable 3 m and Trigger-Box with BNC connections. EMCCD image sensor: Texas Instruments TX285 frame-transfer CCD with EM Gain Number of Pixels: 1004 (H) x 1002 (V) Pixel size: 8 µm x 8 µm Chip size: 8 mm x 8 mm Spectral range: 380 to 1050 nm Max. Full Well Capacity: Approx. 32 ke Selectable Resolution: H x V Binning Factor 125 x 125 8 x 8 250 x 250 4 x 4 500 x 500 2 x 2 1004 x 1002 1 x 1 Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit / 40 MHz Read noise: 18 e- rms / 10 MHz 25 e- rms / 20 MHz 28 e- rms / 40 MHz Read noise effectively reduced to < 1 e- rms with EM Gain enabled. ''Easy EM'' feature for one-click optimization of EM Gain setting for various modes of speed. (ZEN only) Dark current: 0.06 e-/p/s @ -50°C Integration Time: 200 µs to 600 s Cooling: -50 °C (regulated) Control signals: TTL output for controlling of external shutters Interface: FireWire B / IEEE1394b, 9 pin jack, cable 3 m, 800MBit/s Optical Interface: C-Mount Size / Weight: App. 15 cm x 7,6 cm x 6,4 cm (5,9'' x 3,0'' x 2,5'') / 1 kg Housing: 1/4'' photo thread for tripod mount Registration: CE, FCC Power Supply: AC 100 - 240 V, DC 12 V / 5 A, 60 W with country specific plug Environmental conditions: 0 ... 25°C ambient, 0% ... 80% relative air humidity, not condensing, free air circulation required

Microscopy Camera Axiocam 712 mono (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX304 Exmor CMOS, SONY Pregius Global Shutter Monochrome Number of Pixels: 4096 (H) x 3008 (V) = 12 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 14.1 mm x 10.4 mm, equivalent to 1'' (diagonal 17.5 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 4096 x 3008 1x1 Basic Resolution 2048 x 1504 2x2 1365 x 1002 3x3 1024 x 752 4x4 819 x 601 5x5 H x V Subsampling Factor 4096 x 3008 1x1 2048 x 1504 2x2 Live Frame Rates: (1 ms exposure, default setting) H x V Frame Rate (fps) 4096 x 3008 23 Frame Rates for Time Series Recording: (1 ms exposure, further depending on hardware and software configuration) H x V (ROI) Frame Rate (fps) 4096 x 3008 23 2048 x 1504 46 (2x2 subsampling, full field of view) 1920 x 1080 63 1024 x 1024 66 1920 x 256 241 1920 x 128 431 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000   Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions (''ROI''): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3'' x 3.2'' x 1.7'') / 580 g Housing: Blue anodized aluminum, with cooling fins on top 1/4'' photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: Windows 10 x64 Enterprise Supported Software: ZEN 3.1 blue, ZEN 2.7 core

Microscopy Camera Axiocam 506 mono (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2752 (H) x 2208 (V) = 6 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 12 mm x 10 mm, equivalent to 1'' (16 mm diagonal) Spectral range: with protection glass app. 400 nm to 1000 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 2752 x 2208 1x1 Basic Resolution 1376 x 1104 2x2 912 x 736 3x3 688 x 552 4x4 554 x 440 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 2752 x 2208 1 19 1376 x 1104 2 33 912 x 736 3 51 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 2752 x 2208 1 20 1376 x 1104 2 34 912 x 736 3 44 688 x 552 4 52 554 x 440 5 58 Timelapse recording with ''Burst Mode''-function Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500 : 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters, one trigger input for exposure control, 5V auxiliary voltage, GND) Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 12.1 MB at 2752 x 2208 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3''x3.2''x1.7'') / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4'' photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Microscopy Camera Axiocam 702 mono (D) High performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1920 (H) x 1216 (V) = 2.3 Mega Pixels Pixel size: 5.86 µm x 5.86 µm Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2'' (13.3 mm diagonal) Spectral range: With protection glass app. 350 nm to 1000 nm Quantum Efficiency 72% at 520 nm (including sensor cover slip) Max. Full Well Capacity: Approx. 32.000 e Selectable Resolution: H x V Binning Faktor (digital) 1920 x 1216 1x1 basic pixel count 960 x 608 2x2 640 x 404 3x3 480 x 304 4x4 384 x 240 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms, H x V Frame Rate 1936 x 1460 >100 fps Frame rates for time series recording (depending on computer hardware and software configuration) H x V Frame Rate 1920 x 1216 128 1920 x 1080 145 960 x 612 245 480 x 306 458 384 x 244 557 1280 x 112 982 1024 x 112 1003 Timelapse recording with ''Burst Mode''-function Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit (internal 12 Bit ADC, 14 Bit by data processing) Dynamic Range: Typical >5000: 1 (74> dB) at typ. <(><<)> 6.e readout noise Dark current: ca. 1.1 e/p/s Integration Time: 0.1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 15°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 300 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 4.7 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3''x3.2''x1.7'') / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4'' photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Microscopy Camera Axiocam 705 mono (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 Exmor CMOS, SONY Pregius Global Shutter Monochrome Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3'' (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1 to 5x5 digital) 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor 2464 x 2056 1x1 1232 x 1028 2x2 Live Frame Rates: (1 ms, exposure, default setting) H x V Frame Rate (fps) 2464 x 2056 30 Frame Rates for Time Series Recording: (at 1 ms exposure, further depending hardware and software configuration) H x V (ROI) Frame Rate (fps) 2464 x 2056 60 1920 x 1080 115 1232 x 1028 173 (2x2 subsampling, full field of view) 1024 x 1024 121 512 x 512 235 1920 x 256 436 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 HDR Mode Dynamic Range 1:25,000   Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode Adjustable over or under-exposure mode Optional measurement on defined target area (spot-meter) Readout of Sensor Sub Regions (''ROI''): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation with USB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 4.3 cm (2.3'' x 3.2'' x 1.7'') / 580 g Housing: Blue anodized aluminum, with cooling fins on top 1/4'' photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 and USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: Windows 10 x64 Enterprise Supported Software: ZEN 3.1 blue, ZEN 2.7 core

Microscopy Camera Axiocam 503 mono (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3'' (11 mm diagonal) Spectral range: With protection glass app. 400 nm to 1000 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 640 x 484 3x3 480 x 364 4x4 384 x 292 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with ''Burst Mode''-function Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 5.6 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3''x3.2''x1.7'') / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4'' photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23'' (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: Blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.75 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Operating systems for ZEN: Windows 10 x64 Prof./Ultimate and higher for Labscope: Windows 7/10 x64 Prof./Ultimate and iOS v11 and higher Supported Application Software: ZEN blue v3.0 and higher (includes ZEN lite/pro/system) ZEN core v2.7 and higher (includes ZEN starter/core) Labscope v2.9 (win) v2.8.3 (iOS) and higher TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App and Labscope software. The App is available as a free download from the Apple App Store. Unless otherwise stated by the distributor, iPad and WLAN router are not supplied by ZEISS.