Fluorescence zoom microscope Axio Zoom.V16 (11x ... 412x)

Stop slider mot. with centerable luminous-field diaphragm

Illuminator HXP 200C (D) inclusive built-in power supply 310W, lamp module, infrared filter, CAN-BUS cable and country-specific mains cord. Fluorescence light source with integrated shutter with trigger capability (5V TTL), that works stepper motor controlled, fast and vibration free. With CAN interface for remote control of the shutter

Cold-light source CL 9000 LED CAN (D) - up to 900 lm light flux at 9 mm fiber output dia., ca. 6500K color temperature - min. 50,000 operating hours until intensity drop to 70% - control of intensity and 6 memory cells by rotary push knob and LCD - 10 mm collet chuck with sensor for 1500 light guides - filter slider for 2 mounted filters 35 x 26 x 4 mm and with free aperture - max. 80W wide-range supply for flicker free light, silent fan - 2.5 mm jack bush for on/off via optional foot button S - BNC socket for trigger input - 2 CAN RJ45 sockets for light control by EMS 3 - CAN RJ45 cable 1 m, country-specific power cable - Dimensions D241xW192xH118 mm, weight 3.1 kg

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Shutter remote control for HXP C incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Day Light Filter CL LED (D)

Yellow filter for CL LED (D)

Lamp HXP 200, spare (D) average lifetime 2000h

Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50

Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50

Filter set 63 HE mRFP shift free (E) EX BP 572/25, BS FT 590, EM BP 629/62

Camera Adapter 60N-C 1'' 1.0x

Eyepiece PL 16x/16 Br. foc.

Eyepiece eyecup

Microscope body Axio Zoom.V16 - apochromatic motor zoom 16:1 (0.7x ... 11.2x), with more than twice the aperture of stereo zoom, - motorized aperture diaphragm with scroll wheel and 3 variable control modes: 1. ''Brightness'' for maximum of image brightness with 10x eyepieces or maximum of resolution with 16x or 25x eyepieces, 2. ''Camera'' for constant brightness and resolution along zoom range fitted to high-resolution image sensor, 3. ''Eyepiece'' for large depth of field in lower zoom range and resolution fitted to 10x eyepieces; - objective support M55x1.5, removeable for nosepiece assembling, - position sensors for objective nosepiece Z, - 76mm support dia. Fitting 435402 carrier S or 435380-9000 nosepiece Z, - additionally required HIP for supply and operation (in Brightness mode only) or EMS 3 + SYCOP 3 for mode control and USB interface

Controller EMS 3 includes 150 W wide-range power supply, on/off button, on rear side mains switch and interfaces: - 5x CAN-RJ45 for CL 9000 LED CAN, SteREO or Axio Zoom components, - 1x Power/CAN, cable 435403-9030 to focus motor 3 or 435610-5003 to motor 2 additionally required, - 1x SYCOP 3, 2x KL 2500 LCD, 2x footswitch, - 2x CAN-HD15 for Axio accessories (motor stage, light sources), - 1x USB to work station, 1x RS232 (D-Sub DE9), incl. USB cable 2m and country-specific power cable

System Control Panel SYCOP 3 5.7'' color touch screen with LED back illumination, joystick, 2 scroll wheels and 6 freely configurable keys; incl. 2 m cable to EMS 3

Binocular ergo phototube Z 0-30° mot - motorized switching 100 vis : 100 doc by push button or CAN command; - manually switchable half-stops after Abbe for stereoscopic effect; - low-positioned binocular tube shifted to observer; - optimized for transillumination top 450 mot; - recommended for high configurations incl. Fluar-illuminator Z or epi-illuminator Z or due to high samples; - incl. cable CAN RJ45 0.5m and 1.0m

Objective PlanNeoFluar Z 1.0x/0.25 FWD 56mm with resolution of 100 ... 740 LP/mm or smallest detail 5.0 ... 0.7 µm; 133mm parfocal length; M62x0.75 thread at front

Objective PlanNeoFluar Z 2.3x/0.57 FWD 10.6mm with resolution of 230 ... 1700 LP/mm or smallest detail 2.3 ... 0.3 µm; 105mm transfer length

Objective nosepiece Z, 2x cod carrier of Axio Zoom.V16 body (containing position sensors for objective nosepiece) and support of 2 objectives and optionally 2 ring illuminators (435506), to mount at focus drive as alternative of carrier S, d=76 mm (435402)

Focus Motor 3, Central Profile Column 490 mm - Lifting range 340 mm, load capacity 20 kg - For stand bases 300/450

Stand base 450 WxDxH 449x346x30mm stand base with 3x M8 threaded holes, insert plate 450 and b/w plate D=120mm; compatible with profile column 490/800 mm or T column 350mm and with transmitted light unit 450 or 450 mot or VisiLED transmitted light; stage d=84mm needs adapter 84/120 (435430-9010) additionally

Cable EMS3/CMD - focus motor 3

Transmitted-light equipment S ergonomic console with light guide and 2 shiftable and tiltable reflectors for bright field/dark field and for variable oblique light, usable on stand base 450

Fluar Illuminator Z mot Fluorescence intermediate tube for Axio Zoom.V16 - Reflector turret 4x mot ACR for reflector modules Z FL P&C, - Slider support for field diaphragm mot/man or ApoTome.2 - Support for light guide with liquid core of 3mm dia. from HXP 120V/200C, - Shutter mot synchronizable with HXP 120V/200C shutter, - Left-side button panel for choice+display of filter set and shutter position, - Anti-glare shield with carrier and receptacle for 6 reflector modules Z FL P&C, - Socket CAN RJ45 and 2 cables CAN RJ45 0.5m and 1.0m, - Plug-in power unit CAN RJ45 DC 24V 30W, mains input plug EU, GB, USA/J, AUS

Reflector module Z FL ACR P&C to Fluar Illuminator Z mot on Axio Zoom.V16 and SYCOP 3

Foot button S (D) - 3 m connection cable, 2.5 mm mono jack - Switches LED light sources between ON/Standby mode - compatible with: Light Sources CL 4500/6000/9000 LED, Controller MC 1500 for VisiLED, Transillumination base 300

Trigger cable for HXP C light source (D) one side D-Sub 9 for connection to HXP C, other side BNC. Incl. BNC coupling for connection to trigger cable set AxioCam, Trigger Board for Fast Acquisition or Colibri.

Slider assembly ApoTome.2 for Axio Zoom.V16 consisting of: slider with transmission grids with 3 frequencies, reflector module calibration ApoTome ACR P&C, mirror, fluorescence test slide and others in case; control electronics incl. CAN-HD15 cable 2.5m, USB cable 3m and country-specific power cable

Microscopy Camera Axiocam 506 mono (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2752 (H) x 2208 (V) = 6 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 12 mm x 10 mm, equivalent to 1'' (16 mm diagonal) Spectral range: with protection glass app. 400 nm to 1000 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 2752 x 2208 1x1 Basic Resolution 1376 x 1104 2x2 912 x 736 3x3 688 x 552 4x4 554 x 440 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 2752 x 2208 1 19 1376 x 1104 2 33 912 x 736 3 51 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 2752 x 2208 1 20 1376 x 1104 2 34 912 x 736 3 44 688 x 552 4 52 554 x 440 5 58 Timelapse recording with ''Burst Mode''-function Readout of Sensor Sub-Regions (''ROI''): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500 : 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters, one trigger input for exposure control, 5V auxiliary voltage, GND) Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 12.1 MB at 2752 x 2208 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3''x3.2''x1.7'') / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4'' photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Trigger Cable Set Axiocam 5xx/7xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

ZEN 2.6 pro Hardware License Key Image acquisition and processing under Win 7 / 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following modules are included: - ZEN Module Measurement - ZEN Module Multi Channel - ZEN Module Panorama - ZEN Module Manual Extended Focus - ZEN Module Connect Entry

Dust protection Set L consisting of dust cover (L670xW460xH775 mm), eyepiece cover and protection cap for luminous-field diaphragm