Holding ring A53 --> d=66 mm attached to Greenough body or front lens <1x, the ring requires 15.5 mm of working distance; on front lens >1x, 0 mm or 15.5 mm of working distance are required, depending on ring orientation
Microscope Body Stemi 508 trino - Apochromatic greenough system - Camera port with interface 60N with fixed split 50vis:50doc right - Manually operable zoom 8:1 (0.63x...5.0x) on both sides - Switchable zoom clickstops 0.63x-0.8x-1x-1.25x-1.6x-2x-2.5x-3.2x-4x-5x - Free working distance 92 mm (without dust protection glass) - Viewing angle 35° with adjustable interocular distance 55...75 mm - Eyepiece mount 30 mm with maximum field number 23 mm - Mount D=76 mm for Stemi mount/Mount S - Interface D=53 mm for illuminators - Thread M49/50 for front optics or analyzer Additionally included: - Eyepieces PL 10x/23 Br. foc. - Dust protection glass M50 with M49x0.75 - Camera adapter 60N C-Mount 0.5x
Stand M LED - Stand base D340xW300xH35 mm - Working surface W255xD215 mm - Interfaces d=84 mm for stages and d=45 mm for TL polarizer - Central through-hole 40 mm - Column 360 mm with drive, lifting range 190 mm - Stemi mount d=76 mm, load capacity 5 Kg, adjustable friction - Transillumination units M LED retrofittable - 2x sockets for IVI and illuminator K LED - Separate RL/TL controls: 2x rotary push knob for on/off/dimming - 3x Memory button to save/recall three mixed light settings: Save: Long press (2 sec), call: Short press Saves: Currently set values (on/off, brightness) of RL/TL illuminators K/M LED Does not save: Mechanical adjustment of lighting and segment setting and rotation of ring illuminator K LED - Integrated power unit 12V DC 24W/100...240V AC/50...60Hz Additionally included: - Glass and B/W plastic plate D=84x5 mm - Country-specific power cable EURO C8 - Dust cover
Ring Illuminator K LED segmentable - 48 LEDs in 2 rows, tilted - FWD 50...300 mm, mount d=66 mm - Separate controls for segmentation and rotation - 4 modes: Full, half, quarter circle, 2 facing quarter circles - Manual turning in 90° steps or continuous rotation - For stands K EDU/LAB/MAT, stand M LED or controller K LED