ZEISS Shop
Inverted microscopes
Axio Observer
Axio Observer 3
Inverted microscope Axio Observer 3

Axio Observer 3

ZEISS Axio Observer for Life Sciences. Your open and flexible inverted microscope platform

Inverted microscope Axio Observer 3

Item no.: 491915-0001-000 (individual configuration)

Description

Inverted microscope Axio Observer 3 for transmitted-light brightfield HAL, phase contrast Ph1 and Pl...

Full description

Inverted microscope Axio Observer 3

Item Number: 491915-0001-000 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Z-drive operation, flat; right

Recover

Item no.: 430051-0000-000

Z-drive operation, flat; right

Item Number: 430051-0000-000

Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right

Microscope stand Axio Observer 3

Recover

Item no.: 431004-9901-000

Microscope stand Axio Observer 3

Item Number: 431004-9901-000

Microscope stand Axio Observer 3 - 6-position nosepiece, H DIC M27 cod. - manual focus drive - 1-position tube lens mount with 1x tube lens - path deflection to the tube for visual observation - slider mount for PlasDIC and analyzer module - keys for switching TL/RL illumination - light manager - interfaces: 1x USB and 1x CAN - integrated 12V DC 100W power supply, stabilized, 100V-127V and 200V-240VAC / 50-60Hz / max. 300VA - USB cable and country-specific line cable
Sideport 60N L, 2 switching positions

Recover

Item no.: 425150-0000-000

Sideport 60N L, 2 switching positions

Item Number: 425150-0000-000

Sideport 60N L, 2 switching positions for basic stands Axio Observer 3 / 5 / A1 / D1 (100% vis : 0% L / 20% vis : 80% L)
Aqua Stop II

Recover

Item no.: 431716-0000-000

Aqua Stop II

Item Number: 431716-0000-000

Aqua Stop II for Axio Observer, Axiovert 5 and Axiovert 200

Stand accessories

0 added 0 removed

Carrier for transmitted-light illumination

Recover

Item no.: 423920-0000-000

Carrier for transmitted-light illumination

Item Number: 423920-0000-000

Carrier for transmitted-light illumination tiltable, for the mounting of condensers. Equiped with luminous-field diaphragm, 3-position filter changer and attachment possibility for micromanipulators.

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Bulbs

0 added 0 removed

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Polarization

0 added 0 removed

Slit-diaphragm 3.5mm for PlasDIC

Recover

Item no.: 000000-1246-773

Slit-diaphragm 3.5mm for PlasDIC

Item Number: 000000-1246-773

Slit-diaphragm 3.5mm for PlasDIC
PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm

Recover

Item no.: 426980-9080-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm

Item Number: 426980-9080-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm for Axio Observer 3 / 5

Stages and accessories

0 added 0 removed

Specimen stage 250x230 mm with hardcoat anodized surface

Recover

Item no.: 432017-9901-000

Specimen stage 250x230 mm with hardcoat anodized surface

Item Number: 432017-9901-000

Specimen stage 250x230 mm with hardcoat anodized surface
Universal mounting frame M

Recover

Item no.: 471718-0000-000

Universal mounting frame M

Item Number: 471718-0000-000

Universal mounting frame M for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm)
Object guide 130x85 mm right

Recover

Item no.: 000000-1005-833

Object guide 130x85 mm right

Item Number: 000000-1005-833

Object guide 130x85 mm right can be attached to both sides, accepts various mounting frames M

Tubes and accessories

0 added 0 removed

Binocular tube 45°/23

Recover

Item no.: 425537-0000-000

Binocular tube 45°/23

Item Number: 425537-0000-000

Binocular tube 45°/23 with manual shutter

Optovar systems

0 added 0 removed

Filters

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.
Auxiliary microscope, d=30

Recover

Item no.: 444830-9902-000

Auxiliary microscope, d=30

Item Number: 444830-9902-000

Auxiliary microscope, d=30 to adjust the phase rings and darkfield stop in the condenser

Eyepiece accessories

0 added 0 removed

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Objective LD A-Plan 5x/0.15 Ph1 M27

Recover

Item no.: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27

Item Number: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)
Objective LD A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27

Item Number: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)
Objective LD A-Plan 20x/0.35 Ph1 M27

Recover

Item no.: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27

Item Number: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)
Objective LD A-Plan 40x/0.55 Ph1 M27

Recover

Item no.: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27

Item Number: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD=2.3mm at CG=1mm polystyrene)

Immersion oils

0 added 0 removed

Condensers

0 added 0 removed

3 position contrast slider 10x29mm for PlasDIC module and analyzer

Recover

Item no.: 426980-9100-000

3 position contrast slider 10x29mm for PlasDIC module and analyzer

Item Number: 426980-9100-000

3 position contrast slider 10x29mm for PlasDIC module and analyzer - for Axio Observer 3 / 5 - switching positions: DIC/Pol, H/Ph/FL, PlasDIC - slider operatable from both sides
LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions

Recover

Item no.: 424241-0000-000

LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions

Item Number: 424241-0000-000

LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions with aperture diaphragm, WD=70mm For objective magnifications 2.5x-100x

Connecting cables

0 added 0 removed

Control devices

0 added 0 removed

Apotome

0 added 0 removed

Laser TIRF

0 added 0 removed

Image processing

0 added 0 removed

Services

0 added 0 removed

Dust cover for Axio Observer / Axiovert 200/200M

Recover

Item no.: 459330-0000-000

Dust cover for Axio Observer / Axiovert 200/200M

Item Number: 459330-0000-000

Dust cover for Axio Observer / Axiovert 200/200M (L600xB420xH620 mm)

PASCAL

0 added 0 removed

System table

0 added 0 removed

LSFM Components

0 added 0 removed

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Inverted microscope Axio Observer 3
Item Number: 491915-0001-000 (individual configuration)
Microscope stands upright (2)

Special accessories

Item has been added to the configuration

Z-drive operation, flat; left

Recover

Item no.: 430052-0000-000

Z-drive operation, flat; left

Item Number: 430052-0000-000

Z-drive operation, flat; left Flat, ergonomic control knob on the left side, recommended for combinations with mechanical stage or object guides, left

Item has been added to the configuration

Z-drive operation, flat; right

Recover

Item no.: 430051-0000-000

Z-drive operation, flat; right

Item Number: 430051-0000-000

Z-drive operation, flat; right Flat, ergonomic control knob on the right side, recommended for combinations with mechanical stage or object guides, right

Microscope stands inverted (25)

Research microscopes

Item has been added to the configuration

Microscope stand Axio Observer 7 materials

Recover

Item no.: 431009-9904-000

Microscope stand Axio Observer 7 materials

Item Number: 431009-9904-000

Microscope stand Axio Observer 7 materials - 6-position objective nosepiece, HD DIC M27 mot. ACR - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - keys for switching TL/RL illumination - circular operation key unit right and left - light- and contrast manager - slider mount 6x30 for Polarizer slider, 90° rotatable - slider mount 6x20 for sliders C-DIC and TIC - interfaces 4x CAN, 2x USB-A, 1x USB-C and TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable

Item has been added to the configuration

Microscope stand Axio Observer 5 materials

Recover

Item no.: 431008-9903-000

Microscope stand Axio Observer 5 materials

Item Number: 431008-9903-000

Microscope stand Axio Observer 5 materials - 6-position nosepiece, HD DIC M27 cod. - manual focus drive - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret cod. - focus stop - z-drive operation, flat; left - keys for switching TL/RL illumination - circular operation key unit right - light manager - slider mount 6x30 for Polarizer slider, 90° rotatable - slider mount 6x20 for sliders C-DIC and TIC - interfaces CAN, 2x USB-A, 1x USB-C and TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - integrated 12V DC 100W power supply, stabilized, 100V-127V and 200V-240VAC / 50-60Hz / max. 300VA - USB cable and country-specific line cable

Item has been added to the configuration

Microscope stand Axio Observer 7

Recover

Item no.: 431007-9904-000

Microscope stand Axio Observer 7

Item Number: 431007-9904-000

Microscope stand Axio Observer 7 - motorized focus drive (min. step width 10 nm) - prepared for motorized beam path deflection - with optional support of laser based applications - TFT touchscreen - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret mot. - circular operation key unit right and left - keys for switching TL/RL illumination - light- and contrast manager - interfaces: 4x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - external power supply 12V DC 100W, stabilized, 100V-240VAC / 50-60Hz / max. 190VA - USB cable and country-specific line cable

Item has been added to the configuration

Microscope stand Axio Observer 5

Recover

Item no.: 431006-9901-000

Microscope stand Axio Observer 5

Item Number: 431006-9901-000

Microscope stand Axio Observer 5 - 6-position nosepiece, H DIC M27 cod. - manual focus drive incl. focus stop - z-drive operation, flat; left - 1x tube lens to fit with optional available 1-position tube lens mount or 3-position optovar turret cod. - slider mount for PlasDIC and analyzer module - circular operation key unit right - keys for switching TL/RL illumination - light manager - interfaces: 1x CAN, 2x USB-A, 1x USB-C and 1x TCP/IP - trigger socket (In/Out) for shutter - connecting socket for external UNIBLITZ shutter - integrated 12V DC 100W power supply, stabilized, 100V-127V and 200V-240VAC / 50-60Hz / max. 300VA - USB cable and country-specific line cable

Item has been added to the configuration

Microscope stand Axio Observer 3

Recover

Item no.: 431004-9901-000

Microscope stand Axio Observer 3

Item Number: 431004-9901-000

Microscope stand Axio Observer 3 - 6-position nosepiece, H DIC M27 cod. - manual focus drive - 1-position tube lens mount with 1x tube lens - path deflection to the tube for visual observation - slider mount for PlasDIC and analyzer module - keys for switching TL/RL illumination - light manager - interfaces: 1x USB and 1x CAN - integrated 12V DC 100W power supply, stabilized, 100V-127V and 200V-240VAC / 50-60Hz / max. 300VA - USB cable and country-specific line cable

Item has been added to the configuration

Microscope stand Axio Observer 3 materials

Recover

Item no.: 431003-9903-000

Microscope stand Axio Observer 3 materials

Item Number: 431003-9903-000

Microscope stand Axio Observer 3 materials - 6-position nosepiece HD DIC M27 cod. - manual focus drive - fixed 1-position tube lens mount with 1x tube lens - path deflection to the tube for visual observation - reflected-light illuminator HD PoL FL (apochromatic corrected) - slider mount 6x30 for Polarizer slider, 90° rotatable - slider mount 6x20 for sliders C-DIC and TIC - keys for switching TL/RL illumination - light manager - interfaces USB and CAN - integrated 12V DC 100W power supply, stabilized, 100V-127V and 200V-240VAC / 50-60Hz / max. 300VA - USB cable and country-specific line cable

Special accessories

Item has been added to the configuration

Aqua Stop II

Recover

Item no.: 431716-0000-000

Aqua Stop II

Item Number: 431716-0000-000

Aqua Stop II for Axio Observer, Axiovert 5 and Axiovert 200

Item has been added to the configuration

Z-drive, 13 mm travel, mot.

Recover

Item no.: 431018-0000-000

Z-drive, 13 mm travel, mot.

Item Number: 431018-0000-000

Z-drive, 13 mm travel, mot. extended travel range from 10 to 13 mm

Item has been added to the configuration

Z-drive, 13 mm travel, man.

Recover

Item no.: 431017-0000-000

Z-drive, 13 mm travel, man.

Item Number: 431017-0000-000

Z-drive, 13 mm travel, man. extended travel range from 10 to 13 mm

Item has been added to the configuration

3-position Optovar turret mot.

Recover

Item no.: 431013-0000-000

3-position Optovar turret mot.

Item Number: 431013-0000-000

3-position Optovar turret mot.

Item has been added to the configuration

3-position Optovar turret cod.

Recover

Item no.: 431012-0000-000

3-position Optovar turret cod.

Item Number: 431012-0000-000

3-position Optovar turret cod.

Item has been added to the configuration

1-position tube lens mount, fixed

Recover

Item no.: 431010-0000-000

1-position tube lens mount, fixed

Item Number: 431010-0000-000

1-position tube lens mount, fixed

Item has been added to the configuration

Anti vibration set Axio Observer (D)

Recover

Item no.: 431007-9000-000

Anti vibration set Axio Observer (D)

Item Number: 431007-9000-000

Anti vibration set Axio Observer (D) Comprising: 2 supporting plates, fitted with 2 vibration dampers (each), for the fixed mounting at the bottom of the Axio Observer stand

Item has been added to the configuration

Sideport 60N L 80/R 100, 3 switching positions

Recover

Item no.: 425165-0000-000

Sideport 60N L 80/R 100, 3 switching positions

Item Number: 425165-0000-000

Sideport 60N L 80/R 100, 3 switching positions (100% vis : 0% LR / 20% vis : 80% L / 0% vis : 100% R)

Item has been added to the configuration

Sideport 60N L/R 100, 3 switching positions

Recover

Item no.: 425155-0000-000

Sideport 60N L/R 100, 3 switching positions

Item Number: 425155-0000-000

Sideport 60N L/R 100, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 0% vis : 100% R)

Item has been added to the configuration

Sideport 60N L/R, 3 switching positions

Recover

Item no.: 425154-0000-000

Sideport 60N L/R, 3 switching positions

Item Number: 425154-0000-000

Sideport 60N L/R, 3 switching positions (100% vis : 0% LR / 0% vis : 100% L / 20% vis : 80% R)

Item has been added to the configuration

Sideport 60N R, 3 switching positions

Recover

Item no.: 425153-0000-000

Sideport 60N R, 3 switching positions

Item Number: 425153-0000-000

Sideport 60N R, 3 switching positions (100% vis : 0% R / 0% vis : 100% R / 50% vis : 50% R)

Item has been added to the configuration

Sideport 60N L, 3 switching positions

Recover

Item no.: 425152-0000-000

Sideport 60N L, 3 switching positions

Item Number: 425152-0000-000

Sideport 60N L, 3 switching positions (100% vis : 0% L / 0% vis : 100% L / 50% vis : 50% L)

Item has been added to the configuration

Sideport 60N L 100, 2 switching positions

Recover

Item no.: 425151-0000-000

Sideport 60N L 100, 2 switching positions

Item Number: 425151-0000-000

Sideport 60N L 100, 2 switching positions for basic stands Axio Observer 3 / 5 / A1 / D1 (100% vis : 0% L / 0% vis : 100% L)

Item has been added to the configuration

Sideport 60N L, 2 switching positions

Recover

Item no.: 425150-0000-000

Sideport 60N L, 2 switching positions

Item Number: 425150-0000-000

Sideport 60N L, 2 switching positions for basic stands Axio Observer 3 / 5 / A1 / D1 (100% vis : 0% L / 20% vis : 80% L)

Item has been added to the configuration

Baseport 60N

Recover

Item no.: 425126-0000-000

Baseport 60N

Item Number: 425126-0000-000

Baseport 60N

Item has been added to the configuration

Anti-vibration plate, rectangular 460mmx610mm (D)

Recover

Item no.: 000000-1754-660

Anti-vibration plate, rectangular 460mmx610mm (D)

Item Number: 000000-1754-660

Anti-vibration plate, rectangular 460mmx610mm (D) suitable for total weight 50 - 105 lbs, e. g. for VivaTome or Cell Observer SD

Item has been added to the configuration

Beam path switching mot

Recover

Item no.: 000000-1069-229

Beam path switching mot

Item Number: 000000-1069-229

Beam path switching mot between visual observation or frontport or baseport

Item has been added to the configuration

Beam path switching

Recover

Item no.: 000000-1069-228

Beam path switching

Item Number: 000000-1069-228

Beam path switching between visual observation or frontport or baseport

Item has been added to the configuration

Path deflection to the tube

Recover

Item no.: 000000-1069-227

Path deflection to the tube

Item Number: 000000-1069-227

Path deflection to the tube for visual observation

Stand accessories (18)

Various stand accessories

Item has been added to the configuration

Holder with LCD display and Light Manager

Recover

Item no.: 432923-0000-000

Holder with LCD display and Light Manager

Item Number: 432923-0000-000

Holder with LCD display and Light Manager LCD display, four lines for display of nosepiece position, objective magnification, contrasting technique, reflector turret assignment, optovar factor, scale of intermediate image and lamp brightness

Item has been added to the configuration

Docking station for TFT-Display

Recover

Item no.: 432907-9901-000

Docking station for TFT-Display

Item Number: 432907-9901-000

Docking station for TFT-Display upgrading module for the TFT-Display of motorized stands Axio Imager and Axio Observer - free positioning on desktop - Control of z-drive and circular operation key unit - mechanical interface to attach Electronic Coaxial Drive - TFT-Display 30°-45° tiltable

Item has been added to the configuration

Protection filter for reflector turret

Recover

Item no.: 000000-1068-113

Protection filter for reflector turret

Item Number: 000000-1068-113

Protection filter for reflector turret

Filter slider

Item has been added to the configuration

Filter module ms GFP/mRFP Duolink

Recover

Item no.: 426143-9140-000

Filter module ms GFP/mRFP Duolink

Item Number: 426143-9140-000

Filter module ms GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE ms GFP+mRFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 470/27 for GFP EX BP 556/25 for mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module wl GFP/mRFP Duolink

Recover

Item no.: 426143-9130-000

Filter module wl GFP/mRFP Duolink

Item Number: 426143-9130-000

Filter module wl GFP/mRFP Duolink consisting of Filter module 2-position Duolink and filter set 79 HE wl GFP+mRFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 470/27+556/25 for GFP and mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter module ms CFP/YFP Duolink

Recover

Item no.: 426143-9120-000

Filter module ms CFP/YFP Duolink

Item Number: 426143-9120-000

Filter module ms CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE ms CFP+YFP, mounted and adjusted in position 1. For excitation with multi spectral light sources. EX BP 445/25 for CFP EX BP 510/15 for YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter module wl CFP/YFP Duolink

Recover

Item no.: 426143-9110-000

Filter module wl CFP/YFP Duolink

Item Number: 426143-9110-000

Filter module wl CFP/YFP Duolink consisting of Filter module 2-position Duolink and filter set 78 HE wl CFP+YFP, mounted and adjusted in position 1. For excitation with white light sources. EX DBP 445/25+510/15 for CFP and YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

3-position filter slider, d=25 mm

Recover

Item no.: 000000-1062-259

3-position filter slider, d=25 mm

Item Number: 000000-1062-259

3-position filter slider, d=25 mm for FL incident-light equipment for Axiovert 200

Motorized reflector turret

Item has been added to the configuration

6-position reflector turret mot. ACR for P&C modules

Recover

Item no.: 424948-0000-000

6-position reflector turret mot. ACR for P&C modules

Item Number: 424948-0000-000

6-position reflector turret mot. ACR for P&C modules reflector modules exchangable without removal of reflector turret

Item has been added to the configuration

6-position reflector turret mot. for P&C modules

Recover

Item no.: 424947-0000-000

6-position reflector turret mot. for P&C modules

Item Number: 424947-0000-000

6-position reflector turret mot. for P&C modules reflector modules exchangable without removal of reflector turret

Coded reflector turret

Item has been added to the configuration

6-position reflector turret cod. for P&C modules

Recover

Item no.: 424946-0000-000

6-position reflector turret cod. for P&C modules

Item Number: 424946-0000-000

6-position reflector turret cod. for P&C modules reflector modules exchangable without removal of reflector turret

Manual reflector turret

Item has been added to the configuration

6-position reflector turret man. for P&C modules

Recover

Item no.: 424945-0000-000

6-position reflector turret man. for P&C modules

Item Number: 424945-0000-000

6-position reflector turret man. for P&C modules reflector modules exchangable without removal of reflector turret

Motorized nosepiece

Item has been added to the configuration

Compensation module Definite Focus

Recover

Item no.: 424533-9041-000

Compensation module Definite Focus

Item Number: 424533-9041-000

Compensation module Definite Focus for the optical adaptation in case no beam combiner of the Definite Focus module is present in the beam path.

Item has been added to the configuration

Beam Combiner Module UV/VIS for Definite Focus

Recover

Item no.: 424533-9022-000

Beam Combiner Module UV/VIS for Definite Focus

Item Number: 424533-9022-000

Beam Combiner Module UV/VIS for Definite Focus or all applications that require a transmission range between 320nm and 800nm.

Item has been added to the configuration

6-position objective nosepiece, H DIC M27 mot. ACR

Recover

Item no.: 424528-0000-000

6-position objective nosepiece, H DIC M27 mot. ACR

Item Number: 424528-0000-000

6-position objective nosepiece, H DIC M27 mot. ACR

Item has been added to the configuration

6-position objective nosepiece, H DIC M27 mot.

Recover

Item no.: 424527-0000-000

6-position objective nosepiece, H DIC M27 mot.

Item Number: 424527-0000-000

6-position objective nosepiece, H DIC M27 mot.

Motorized filter magazine

Item has been added to the configuration

FL attenuator, discrete mot.

Recover

Item no.: 423648-0000-000

FL attenuator, discrete mot.

Item Number: 423648-0000-000

FL attenuator, discrete mot. Motorized insert for the aperture stop plane of reflected-light illuminators. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.

Manual filter magazine

Item has been added to the configuration

FL attenuator, discrete

Recover

Item no.: 423647-0000-000

FL attenuator, discrete

Item Number: 423647-0000-000

FL attenuator, discrete Insert for the aperture stop plane of reflected-light illuminators. Filter wheel with 6 positions. Pos. 1: clear aperture. Pos. 2-6: transmission appr. 70, 50, 40, 20 and 2%.

Transmitted-light illumination (6)

Transmitted-light illumination carrier

Item has been added to the configuration

Carrier transmitted-light illumination, LCD display, Shutter

Recover

Item no.: 423926-9010-000

Carrier transmitted-light illumination, LCD display, Shutter

Item Number: 423926-9010-000

Carrier transmitted-light illumination, LCD display, Shutter - for Axio Observer 5/D1 - LCD display - shutter, switching time <(><<)> 80ms - manual luminous-field diaphragm - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable

Item has been added to the configuration

Carrier transmitted-light illumination with Shutter

Recover

Item no.: 423926-9000-000

Carrier transmitted-light illumination with Shutter

Item Number: 423926-9000-000

Carrier transmitted-light illumination with Shutter - for Axio Observer 7/Z1 - manual luminous-field diaphragm - shutter, switching time <(><<)> 80ms - condenser mount - interface for LD condenser 0.55 mot. - 3-position filter changer, d=32 mm - carrier tiltable

Item has been added to the configuration

Carrier for transmitted-light illumination with LCD display

Recover

Item no.: 423922-0000-000

Carrier for transmitted-light illumination with LCD display

Item Number: 423922-0000-000

Carrier for transmitted-light illumination with LCD display and light manager, carrier tiltable, for the mounting of condensers. Equipped with luminous-field diaphragm, 3-position filter changer and attachment possibility for micromanipulators. LCD display, four lines for display of nosepiece position, objective magnification, contrasting techniques, reflector turret equipment and lamp brightness.

Item has been added to the configuration

Carrier for transmitted-light illumination

Recover

Item no.: 423920-0000-000

Carrier for transmitted-light illumination

Item Number: 423920-0000-000

Carrier for transmitted-light illumination tiltable, for the mounting of condensers. Equiped with luminous-field diaphragm, 3-position filter changer and attachment possibility for micromanipulators.

Transmitted-light illumination

Item has been added to the configuration

LED lamp module for attachment lamp VIS-LED

Recover

Item no.: 423053-9050-000

LED lamp module for attachment lamp VIS-LED

Item Number: 423053-9050-000

LED lamp module for attachment lamp VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours

Item has been added to the configuration

Attachment lamp VIS-LED with collector

Recover

Item no.: 423053-9030-000

Attachment lamp VIS-LED with collector

Item Number: 423053-9030-000

Illuminator VIS-LED for mounting on the transmitted-light, reflected-light illuminator, included LED lamp module for VIS-LED - color temperature 5600 K - average lifetime > 10,000 hours - control signals: Trigger-input (BNC) for controlling, max. trigger frequency ca. 100 Hz - usable for objectives from 2.5x - incl. neutral-density filter 0.12 D=25x2 for use with digital microscopy cameras

Reflected-light illumination (26)

Fluorescence shutter

Item has been added to the configuration

Stand interface cable for external UNIBLITZ Shutter

Recover

Item no.: 432925-0000-000

Stand interface cable for external UNIBLITZ Shutter

Item Number: 432925-0000-000

Stand interface cable for external UNIBLITZ Shutter switching time < 50 ms

Item has been added to the configuration

Shutter FL, internal for stands Axio Observer 3 / 5 / 7 / D1 / Z1

Recover

Item no.: 423625-0000-000

Shutter FL, internal for stands Axio Observer 3 / 5 / 7 / D1 / Z1

Item Number: 423625-0000-000

Shutter FL, internal for stands Axio Observer 3 / 5 / 7 / D1 / Z1 for reflected-light illumination switching time < 60 ms switching frequency max. 5 Hz

Reflector modules

Item has been added to the configuration

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Recover

Item no.: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable

Item Number: 424941-9070-000

Reflector module FL EC ACR P&C, for darkfield objectives, programmable Filter equipment in Axio Imager.Z2 or Axio Observer.Z1 freely programmable. Contains a diaphragm for covering light from the objective's darkfield channel. Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module FL EC ACR P&C, programmable

Recover

Item no.: 424941-9060-000

Reflector module FL EC ACR P&C, programmable

Item Number: 424941-9060-000

Reflector module FL EC ACR P&C, programmable Filter equipment in Axio Imager.Z2 or Axio Observer 7 / Z1 freely programmable. Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module with analyzer ACR P&C for reflected light

Recover

Item no.: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item Number: 424941-9050-000

Reflector module with analyzer ACR P&C for reflected light

Item has been added to the configuration

Reflector module C-DIC/TIC ACR P&C for reflected light

Recover

Item no.: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light

Item Number: 424941-9000-000

Reflector module C-DIC/TIC ACR P&C for reflected light optimized for circular DIC in reflected light, for use with C-DIC/ TIC sliders 6x20, not suitable for polarization

Item has been added to the configuration

Reflector module DIC/Pol ACR P&C shift free for reflected light

Recover

Item no.: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light

Item Number: 424939-9000-000

Reflector module DIC/Pol ACR P&C shift free for reflected light suitable for DIC and polarization in reflected light, consisting of two Pol filters that are firmly oriented towards each other

Item has been added to the configuration

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Recover

Item no.: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light

Item Number: 424938-0000-000

Reflector module DIC/Pol red I Lambda ACR P&C for reflected light suitable for color DIC and polarization in reflected light, consisting of two Pol filters with lambda plate that are firmly oriented towards each other

Item has been added to the configuration

Reflector module FL EC ACR P&C

Recover

Item no.: 424933-0000-000

Reflector module FL EC ACR P&C

Item Number: 424933-0000-000

Reflector module FL EC ACR P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module FL EC P&C

Recover

Item no.: 424931-0000-000

Reflector module FL EC P&C

Item Number: 424931-0000-000

Reflector module FL EC P&C Reflection avoided through tilted mount for emission filters, max. filter thickness: 5 mm

Item has been added to the configuration

Reflector module bright field ACR P&C for reflected light

Recover

Item no.: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item Number: 424928-9901-000

Reflector module bright field ACR P&C for reflected light

Item has been added to the configuration

Reflector module polarizer ACR P&C for reflected light

Recover

Item no.: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item Number: 424923-9901-000

Reflector module polarizer ACR P&C for reflected light

Item has been added to the configuration

Reflector module dark field ACR P&C for reflected light

Recover

Item no.: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item Number: 424922-9901-000

Reflector module dark field ACR P&C for reflected light

Item has been added to the configuration

Reflector module FL P&C

Recover

Item no.: 424920-0000-000

Reflector module FL P&C

Item Number: 424920-0000-000

Reflector module FL P&C

Aperture diaphragm slider

Item has been added to the configuration

Iris stop slider mot. for incident-light equipment

Recover

Item no.: 423646-0000-000

Iris stop slider mot. for incident-light equipment

Item Number: 423646-0000-000

Iris stop slider mot. for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path)

Item has been added to the configuration

Aperture diaphragm slider MAT mot.

Recover

Item no.: 423644-0000-000

Aperture diaphragm slider MAT mot.

Item Number: 423644-0000-000

Aperture diaphragm slider MAT mot. with integrated ground glass plate

Item has been added to the configuration

Aperture diaphragm slider MAT

Recover

Item no.: 000000-1148-980

Aperture diaphragm slider MAT

Item Number: 000000-1148-980

Aperture diaphragm slider MAT with integrated ground glass plate

Item has been added to the configuration

Slider with variable rectangular diaphragm

Recover

Item no.: 000000-1140-737

Slider with variable rectangular diaphragm

Item Number: 000000-1140-737

Slider with variable rectangular diaphragm for reflected light equipments Axio Observer, Axiovert 200 and Axioplan 2 ie

Item has been added to the configuration

Iris stop slider for incident-light equipment

Recover

Item no.: 000000-1062-360

Iris stop slider for incident-light equipment

Item Number: 000000-1062-360

Iris stop slider for incident-light equipment centerable, can be used as luminous-field diaphragm and/or aperture diaphragm slider (Köhler-type illumination in incident-light beam path)

Various accessories for reflected-light illumination

Item has been added to the configuration

Adapter for Third Party components

Recover

Item no.: 423636-0000-000

Adapter for Third Party components

Item Number: 423636-0000-000

Adapter for Third Party components mounting plate (without optics) for lateral access to the reflected-light illuminator FL of the Axio Observer stand - outer dimensions (H x B): 81.5 x 65.5 mm - aperture (H x B): 42.5 x 41.0 mm

Epi-fluorescence illumination for inverted microscopes

Item has been added to the configuration

Reflected-light illuminator HD Pol FL mot.

Recover

Item no.: 423608-9011-000

Reflected-light illuminator HD Pol FL mot.

Item Number: 423608-9011-000

Reflected-light illuminator HD Pol FL mot. - slider mounts for manual or motorized stop sliders - slider mount 6x30 for polarizer slider, 90° rotatable - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%

Item has been added to the configuration

Reflected-light illuminator HD Pol FL

Recover

Item no.: 423608-9001-000

Reflected-light illuminator HD Pol FL

Item Number: 423608-9001-000

Reflected-light illuminator HD Pol FL - slider mounts for manual stop sliders - slider mount 6x30 for polarizer slider, 90° rotatable - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%

Item has been added to the configuration

Reflected-light illuminator FL mot.

Recover

Item no.: 423607-9901-000

Reflected-light illuminator FL mot.

Item Number: 423607-9901-000

Reflected-light illuminator FL mot. - slider mounts for motorized and manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%

Item has been added to the configuration

Reflected-light illuminator FL

Recover

Item no.: 423606-9901-000

Reflected-light illuminator FL

Item Number: 423606-9901-000

Reflected-light illuminator FL - slider mounts for manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path apochromatic corrected - transmission from 375 to 825 nm >80%

Item has been added to the configuration

Reflected-light illuminator FL UV

Recover

Item no.: 423605-9901-000

Reflected-light illuminator FL UV

Item Number: 423605-9901-000

Reflected-light illuminator FL UV - slider mounts for manual sliders - slider mount for 3-position filter slider, dia. 25 mm - beam path chromatic corrected - transmission from 340 to 850 nm >80%

Fluorescence protection devices

Item has been added to the configuration

Antiglare screen for Axio Observer/Axiovert 200

Recover

Item no.: 000000-1109-741

Antiglare screen for Axio Observer/Axiovert 200

Item Number: 000000-1109-741

Antiglare screen for Axio Observer/Axiovert

Lamps and Lamp housings (24)

Low-voltage and halogen lamp housings

Item has been added to the configuration

HAL 100 illuminator with quartz collector

Recover

Item no.: 423000-9901-000

HAL 100 illuminator with quartz collector

Item Number: 423000-9901-000

HAL 100 illuminator with quartz collector lamp mount and heat-reflecting filter

Switching mirrors

Item has been added to the configuration

Switching mirror for 2 illuminators

Recover

Item no.: 447230-9903-000

Switching mirror for 2 illuminators

Item Number: 447230-9903-000

Switching mirror for 2 illuminators

Item has been added to the configuration

Switching mirror mot.; CAN

Recover

Item no.: 447229-0000-000

Switching mirror mot.; CAN

Item Number: 447229-0000-000

Switching mirror mot.; CAN for Axio Observer 5 / 7 / D1 / Z1 and Axio Imager M2 / Z2 and Z2 Vario

Various lamp accessories

Item has been added to the configuration

Sheathing for Light Guide HXP for Stabilization

Recover

Item no.: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization

Item Number: 423302-9000-000

Sheathing for Light Guide HXP for Stabilization Stabilization of position of the light guide in operation. Avoidance of variation in illumination uniformity due to unwanted movement of the light guide.

Item has been added to the configuration

LED Trigger Box for Colibri 5/7

Recover

Item no.: 423052-9760-000

LED Trigger Box for Colibri 5/7

Item Number: 423052-9760-000

LED Trigger Box for Colibri 5/7 for signal distribution

Item has been added to the configuration

Control Panel for Colibri 5/7

Recover

Item no.: 423052-9751-000

Control Panel for Colibri 5/7

Item Number: 423052-9751-000

Control Panel for Colibri 5/7 with LCD to display the operating state. For LED selection and brightness setting.

Item has been added to the configuration

Face protection shield

Recover

Item no.: 417009-0000-000

Face protection shield

Item Number: 417009-0000-000

Face protection shield Face protection shield

Item has been added to the configuration

Protective gloves

Recover

Item no.: 417008-0000-000

Protective gloves

Item Number: 417008-0000-000

Protective gloves Protective gloves

Item has been added to the configuration

Shutter remote control for HXP 120 V

Recover

Item no.: 000000-0544-644

Shutter remote control for HXP 120 V

Item Number: 000000-0544-644

Shutter remote control for HXP 120 V incl. connecting cable 2 m. Usable as knuckle switch or pedal switch.

Adapters

Item has been added to the configuration

Illumination adapter for light guide (D)

Recover

Item no.: 423302-0000-000

Illumination adapter for light guide (D)

Item Number: 423302-0000-000

Illumination adapter for light guide (D) Suitable for HXP 120 and X-Cite 120, coupling diameter of light guide 5 mm

Item has been added to the configuration

Extension tube for illuminator mount, l=17.0 mm

Recover

Item no.: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

Item Number: 000000-1129-916

Extension tube for illuminator mount, l=17.0 mm

LED lamps

Item has been added to the configuration

Illuminator microLED 3

Recover

Item no.: 423053-9074-000

Illuminator microLED 3

Item Number: 423053-9074-000

Illuminator microLED 3 for mounting on the lamp interface for transmitted-light or reflected-light illumination - colour temperature 5700 K - colour rendering index >90

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Recover

Item no.: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV

Item Number: 423052-9770-000

Solid-State Light Source Colibri 7, Type FR-R[G/Y]BV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Far Red (735nm) for excitation of Cy7 and similar dyes Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Recover

Item no.: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV

Item Number: 423052-9741-000

Solid-State Light Source Colibri 7, Type R[G/Y]CBV-UV 7-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 7 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Cyan (511nm) for excitation of eYFP, Eosin, TOTO-1 and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes Violet (430nm) for excitation of eCFP, Lucifer Yellow, Alexa 430 and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Recover

Item no.: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV

Item Number: 423052-9730-000

Solid-State Light Source Colibri 7, Type R[G/Y]B-UV 5-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 5 excitation lines. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RYB-UV

Recover

Item no.: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV

Item Number: 423052-9720-000

Solid-State Light Source Colibri 7, Type RYB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Yellow (590nm) for excitation of mCherry, Alexa 568, mPlum and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 7, Type RGB-UV

Recover

Item no.: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV

Item Number: 423052-9710-000

Solid-State Light Source Colibri 7, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable and stable on the long term. With integrated monitor diode for repetitious brightness adjustment. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Solid-State Light Source Colibri 5, Type RGB-UV

Recover

Item no.: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV

Item Number: 423052-9640-000

Solid-State Light Source Colibri 5, Type RGB-UV 4-channel fluorescence light source with integrated control unit for continuous brightness adjustment, quickly switchable. Equipped with 4 solid state LED lamps. Red (630nm) for excitation of Cy5, Alexa 631, TOTO-3 and similar dyes Green (555nm) for excitation of Cy3, TRITC, DsRed and similar dyes Blue (475nm) for excitation of eGFP, Fluo4, FITC and similar dyes UV (385nm) for excitation of DAPI, Alexa 405, Hoechst 33258 and similar dyes A country-specific power cable and a desktop power supply are included in delivery.

Item has been added to the configuration

Illumination system Colibri.2

Recover

Item no.: 423052-9502-000

Illumination system Colibri.2

Item Number: 423052-9502-000

Illumination system Colibri.2 continuously variable, quickly switchable and stable on the long term fluorescence light source incl. control box and control panel for use with up to 4 high brightness LED modules changeable by customer. 3 holder for beam combiner, storage case for Colibri LED modules, storage case for 6 reflector modules P&C, country-specific power cable, CAN-Bus cable and USB extension cable are included in delivery.

Cold-light sources

Item has been added to the configuration

Illuminator HXP 120 V (D)

Recover

Item no.: 423013-9010-000

Illuminator HXP 120 V (D)

Item Number: 423013-9010-000

Illuminator HXP 120 V (D) inclusive built in power supply, lamp module and infrared filter. Fluorescence light source with motorized brightness switch and integrated motorized shutter, that works stepper motor controlled, fast and vibration free. With CAN connection for switching the shutter and the motorized brightness switch via ZEN (blue edition) and ZEN 2 (black edition). Interfaces: - 1x CAN (CAN-HD15) - 1x Trigger in (BNC) - 1x Trigger out (BNC) - 1x EXT (BNC) for remote control unit The package includes light guide, cable BNC and cable CAN.

HBO/XBO lamp housing

Item has been added to the configuration

HBO 100 illuminator, self-adjusting with lamp mount and collector

Recover

Item no.: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector

Item Number: 423011-9901-000

HBO 100 illuminator, self-adjusting with lamp mount and collector including heat-reflecting filter and 2m connection cable. Automatic lamp alignment

Item has been added to the configuration

HBO 100 illuminator with lamp mount and collector

Recover

Item no.: 423010-0000-000

HBO 100 illuminator with lamp mount and collector

Item Number: 423010-0000-000

HBO 100 illuminator with lamp mount and collector incl. heat-reflecting filter and 2m connection cable

Item has been added to the configuration

HBO 50 illuminator with collector

Recover

Item no.: 423003-9000-000

HBO 50 illuminator with collector

Item Number: 423003-9000-000

HBO 50 illuminator with collector and lamp mount and heat-reflecting filter

Light guides

Item has been added to the configuration

Lightguide HXP with liquid fill, 2m (D)

Recover

Item no.: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D)

Item Number: 000000-0482-760

Lightguide HXP with liquid fill, 2m (D) ø3mm x 2000mm

Bulbs (5)

Halogen lamps

Item has been added to the configuration

Bulb 12V 100W Halogen Rectangular Filament

Recover

Item no.: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

Item Number: 380059-1660-000

Bulb 12V 100W Halogen Rectangular Filament

HBO lamps

Item has been added to the configuration

Burner Mercury - HBO 50 AC L1 (F)

Recover

Item no.: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item Number: 381619-0000-000

Burner Mercury - HBO 50 AC L1 (F)

Item has been added to the configuration

Burner Mercury - HBO 103 W/2 (F)

Recover

Item no.: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

Item Number: 380301-9350-000

Burner Mercury - HBO 103 W/2 (F)

XBO lamps

Item has been added to the configuration

Bulb XBO 300 Xenon for Lambda DG-4 Plus (D)

Recover

Item no.: 000000-0548-167

Bulb XBO 300 Xenon for Lambda DG-4 Plus (D)

Item Number: 000000-0548-167

Bulb XBO 300 Xenon for Lambda DG-4 Plus (D)

Special lamps

Item has been added to the configuration

Bulb mercury short-arc HXP 120 (D)

Recover

Item no.: 000000-0482-730

Bulb mercury short-arc HXP 120 (D)

Item Number: 000000-0482-730

Bulb mercury short-arc HXP 120 (D) average lifetime 2000 h

Lamp power supply cable (6)

Various electrical accessories

Item has been added to the configuration

4-position CAN hub for microscope stands with CAN interface

Recover

Item no.: 432927-9050-000

4-position CAN hub for microscope stands with CAN interface

Item Number: 432927-9050-000

4-position CAN hub for microscope stands with CAN interface for the connection of up to 4 components with CAN connector to a CAN interface on microscope stands Axio Observer 3 / 5 / 7 / D1 / Z1 and Axio Imager M1 / Z1, M2 / Z2 and Z2 Vario

Power units

Item has been added to the configuration

Power supply external for HAL 100 and LED lamps

Recover

Item no.: 432610-9060-000

Power supply external for HAL 100 and LED lamps

Item Number: 432610-9060-000

Power supply external for HAL 100 and LED lamps stabilized, 90...246V/50...60Hz/225VA, 0...12V DC. Incl. 2 lamp sockets for HAL 100/VIS-LED with switch. With country-specific line cable.

Ballasts

Item has been added to the configuration

Power supply unit for HBO 50

Recover

Item no.: 432607-0000-000

Power supply unit for HBO 50

Item Number: 432607-0000-000

Power supply unit for HBO 50 100...240V, 50...60 Hz, 90VA

Item has been added to the configuration

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Recover

Item no.: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA

Item Number: 432604-9902-000

Power supply unit for HBO 100, 90...250V, 50...60Hz, 265 VA with resettable hour meter at the front

Special lamps

Item has been added to the configuration

Filter slider, d= 25 mm for Lambda DG-4 (D)

Recover

Item no.: 000000-1359-846

Filter slider, d= 25 mm for Lambda DG-4 (D)

Item Number: 000000-1359-846

Filter slider, d= 25 mm for Lambda DG-4 (D) for one filter, max. filter thickness: 7 mm

Item has been added to the configuration

Neutral density filter slider, d= 25 mm for Lambda DG-4 (D)

Recover

Item no.: 000000-1359-845

Neutral density filter slider, d= 25 mm for Lambda DG-4 (D)

Item Number: 000000-1359-845

Neutral density filter slider, d= 25 mm for Lambda DG-4 (D) for one filter, max. filter thickness: 7 mm

Polarization (58)

Various DIC accessories

Item has been added to the configuration

PlasDIC module LD PN 20x, 40x for contrast slider 10x29mm

Recover

Item no.: 426980-9090-000

PlasDIC module LD PN 20x, 40x for contrast slider 10x29mm

Item Number: 426980-9090-000

PlasDIC module LD PN 20x, 40x for contrast slider 10x29mm for Axio Observer 3 / 5

Item has been added to the configuration

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm

Recover

Item no.: 426980-9080-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm

Item Number: 426980-9080-000

PlasDIC module LD A-Plan 10x-63x for contrast slider 10x29mm for Axio Observer 3 / 5

Item has been added to the configuration

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Recover

Item no.: 426717-9120-000

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Item Number: 426717-9120-000

Slit diaphragm 5 mm PlasDIC for condenser (40x/63x)

Item has been added to the configuration

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

Recover

Item no.: 426717-9110-000

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

Item Number: 426717-9110-000

Slit diaphragm 3.5 mm PlasDIC for condenser (10x-40x)

Item has been added to the configuration

Slit-diaphragm 3.5mm for PlasDIC

Recover

Item no.: 000000-1246-773

Slit-diaphragm 3.5mm for PlasDIC

Item Number: 000000-1246-773

Slit-diaphragm 3.5mm for PlasDIC

Analyzers

Item has been added to the configuration

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Recover

Item no.: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10°

Item Number: 453663-9901-000

Analyzer slider D/A with lambda-plate, each rotatable +/- 10° position 1 with analyzer and Lambda/4 plate each rotatable by +/- 10°, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Item has been added to the configuration

Analyzer DIC for Dual filter wheel

Recover

Item no.: 428112-9000-000

Analyzer DIC for Dual filter wheel

Item Number: 428112-9000-000

Analyzer DIC for Dual filter wheel optimized for DIC in transmitted light, not suitable for polarization

Item has been added to the configuration

Analyzer fixed for contrast slider 10x29 mm

Recover

Item no.: 428108-9000-000

Analyzer fixed for contrast slider 10x29 mm

Item Number: 428108-9000-000

Analyzer fixed for contrast slider 10x29 mm

Item has been added to the configuration

Analyzer module Pol ACR P&C for transmitted light

Recover

Item no.: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item Number: 424937-9901-000

Analyzer module Pol ACR P&C for transmitted light

Item has been added to the configuration

Analyzer module DIC ACR P&C shift free for transmitted light

Recover

Item no.: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light

Item Number: 424932-9901-000

Analyzer module DIC ACR P&C shift free for transmitted light optimized for DIC in transmitted light, not suitable for polarization. Pol filter for imaging free from pixel shift, almost without wedge error.

Item has been added to the configuration

Analyzer module DIC ACR P&C for transmitted light

Recover

Item no.: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light

Item Number: 424921-9901-000

Analyzer module DIC ACR P&C for transmitted light optimized for DIC in transmitted light, not suitable for polarization

Item has been added to the configuration

Analyzer slider +/- 30°

Recover

Item no.: 000000-1005-863

Analyzer slider +/- 30°

Item Number: 000000-1005-863

Analyzer slider +/- 30° for DIC (Sénarmont with Lambda/4 plate) with one additional filter position dia. 32 mm

Item has been added to the configuration

Analyzer slider, fixed

Recover

Item no.: 000000-1005-862

Analyzer slider, fixed

Item Number: 000000-1005-862

Analyzer slider, fixed with 2 additional filter positions dia. 32 mm

DIC slider PlasDIC

Item has been added to the configuration

PlasDIC slider for LD PN 63x/0.75 corr

Recover

Item no.: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item Number: 444506-0000-000

PlasDIC slider for LD PN 63x/0.75 corr

Item has been added to the configuration

PlasDIC slider for LD PN 40x/0.60 corr

Recover

Item no.: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item Number: 444505-0000-000

PlasDIC slider for LD PN 40x/0.60 corr

Item has been added to the configuration

PlasDIC slider for LD PN 20x/0.40 corr

Recover

Item no.: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item Number: 444504-0000-000

PlasDIC slider for LD PN 20x/0.40 corr

Item has been added to the configuration

Slider PlasDIC for LD A-Plan 10x-63x

Recover

Item no.: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Item Number: 426980-9060-000

Slider PlasDIC for LD A-Plan 10x-63x

Various PO accessories

Item has been added to the configuration

Analyzer slider D/A, 360° rotatable

Recover

Item no.: 428103-0000-000

Analyzer slider D/A, 360° rotatable

Item Number: 428103-0000-000

Analyzer slider D/A, 360° rotatable position 1 with analyzer, position 2 with clear aperture to allow mounting of filters with dia. 32 mm

Polarizers A

Item has been added to the configuration

Polarizer slider RL 6x30 mm, 90° rotatable

Recover

Item no.: 427710-9060-000

Polarizer slider RL 6x30 mm, 90° rotatable

Item Number: 427710-9060-000

Polarizer slider RL 6x30 mm, 90° rotatable usable with reflected-light illuminator HD Pol FL on the Axio Observer

DIC slider 50x for reflected light

Item has been added to the configuration

DIC slider EC EP 40x/0.6 Epi+

Recover

Item no.: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item Number: 426968-9110-000

DIC slider EC EP 40x/0.6 Epi+

Item has been added to the configuration

DIC slider EC EP 50x/0.7 Epi+

Recover

Item no.: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item Number: 426968-9030-000

DIC slider EC EP 50x/0.7 Epi+

Item has been added to the configuration

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Recover

Item no.: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item Number: 000000-1210-957

DIC slider LD EC EPN 20x/0.22 and 50x/0.55

Item has been added to the configuration

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Recover

Item no.: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

Item Number: 000000-1170-901

DIC slider EC EPN 50x/0.80 and 100x/0.90 HR

DIC slider 20x for reflected light

Item has been added to the configuration

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Recover

Item no.: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item Number: 426968-9100-000

DIC slider EC EP 5x/0.13; 10x/0.2; 20x/0.4 Epi+

Item has been added to the configuration

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Recover

Item no.: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

Item Number: 000000-1170-899

DIC slider EC EPN 5x/0.13 / 10x/0.25 / 20x/0.50

DIC slider type III

Item has been added to the configuration

DIC slider N-Achroplan 63x/0.85 III

Recover

Item no.: 426968-9090-000

DIC slider N-Achroplan 63x/0.85 III

Item Number: 426968-9090-000

DIC slider N-Achroplan 63x/0.85 III

Item has been added to the configuration

DIC slider PA 150x/1.35 III

Recover

Item no.: 426968-9000-000

DIC slider PA 150x/1.35 III

Item Number: 426968-9000-000

DIC slider PA 150x/1.35 III

Item has been added to the configuration

DIC slider C Plan-Apochromat 40x/1.3 III

Recover

Item no.: 426965-9000-000

DIC slider C Plan-Apochromat 40x/1.3 III

Item Number: 426965-9000-000

DIC slider C Plan-Apochromat 40x/1.3 III

Item has been added to the configuration

DIC slider PA 40x/1.3 III

Recover

Item no.: 426965-0000-000

DIC slider PA 40x/1.3 III

Item Number: 426965-0000-000

DIC slider PA 40x/1.3 III

Item has been added to the configuration

DIC slider PA 100x/1.46 III

Recover

Item no.: 426963-0000-000

DIC slider PA 100x/1.46 III

Item Number: 426963-0000-000

DIC slider PA 100x/1.46 III

Item has been added to the configuration

DIC slider LCI PN 63x/1.30 III

Recover

Item no.: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item Number: 426959-0000-000

DIC slider LCI PN 63x/1.30 III

Item has been added to the configuration

DIC slider C Plan-Apochromat 63x/1.4 III

Recover

Item no.: 426957-9000-000

DIC slider C Plan-Apochromat 63x/1.4 III

Item Number: 426957-9000-000

DIC slider C Plan-Apochromat 63x/1.4 III

Item has been added to the configuration

DIC slider PA 63x/1.40 III

Recover

Item no.: 426957-0000-000

DIC slider PA 63x/1.40 III

Item Number: 426957-0000-000

DIC slider PA 63x/1.40 III

Item has been added to the configuration

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Recover

Item no.: 426948-0000-000

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Item Number: 426948-0000-000

DIC slider CA 40x/1.2 W, LD CA 40x/1.1 W III

Item has been added to the configuration

DIC slider LD LCI PApo 63x/1.2 III

Recover

Item no.: 426947-9010-000

DIC slider LD LCI PApo 63x/1.2 III

Item Number: 426947-9010-000

DIC slider LD LCI PApo 63x/1.2 III

Item has been added to the configuration

DIC slider LD LCI PApo 40x/1,2 III

Recover

Item no.: 426947-9000-000

DIC slider LD LCI PApo 40x/1,2 III

Item Number: 426947-9000-000

DIC slider LD LCI PApo 40x/1,2 III

Item has been added to the configuration

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Recover

Item no.: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item Number: 426946-0000-000

DIC slider EC PN 63x1.25 III, CA 63x/1.2 W III

Item has been added to the configuration

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Recover

Item no.: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item Number: 426945-0000-000

DIC slider EC PN 40x/0.75 II, EC PN 100x/1.30 III

Item has been added to the configuration

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Recover

Item no.: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Item Number: 426944-0000-000

DIC slider EC PN and Fluar 40x/1.30 III, PA 40x/0.95 III

Item has been added to the configuration

DIC slider Plan-Apochromat 100x/1.4 III

Recover

Item no.: 426941-9000-000

DIC slider Plan-Apochromat 100x/1.4 III

Item Number: 426941-9000-000

DIC slider Plan-Apochromat 100x/1.4 III

DIC slider type II

Item has been added to the configuration

DIC slider N-Achroplan 40x/0.65 II

Recover

Item no.: 426968-9070-000

DIC slider N-Achroplan 40x/0.65 II

Item Number: 426968-9070-000

DIC slider N-Achroplan 40x/0.65 II

Item has been added to the configuration

DIC slider N-Achroplan 20x/0.45 II

Recover

Item no.: 426968-9060-000

DIC slider N-Achroplan 20x/0.45 II

Item Number: 426968-9060-000

DIC slider N-Achroplan 20x/0.45 II

Item has been added to the configuration

DIC slider LD PN 63x/0.75 II

Recover

Item no.: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item Number: 426956-0000-000

DIC slider LD PN 63x/0.75 II

Item has been added to the configuration

DIC slider LD PN 40x/0.60 II

Recover

Item no.: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item Number: 426955-0000-000

DIC slider LD PN 40x/0.60 II

Item has been added to the configuration

DIC slider LD PN 20x/0.40 II

Recover

Item no.: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item Number: 426954-0000-000

DIC slider LD PN 20x/0.40 II

Item has been added to the configuration

DIC slider PA 63x/1.4 HC II

Recover

Item no.: 426952-0000-000

DIC slider PA 63x/1.4 HC II

Item Number: 426952-0000-000

DIC slider PA 63x/1.4 HC II

Item has been added to the configuration

DIC slider Plan-Apochromat 100x/1.4 HC II

Recover

Item no.: 426949-9000-000

DIC slider Plan-Apochromat 100x/1.4 HC II

Item Number: 426949-9000-000

DIC slider Plan-Apochromat 100x/1.4 HC II

Item has been added to the configuration

DIC slider LCI PN 25x/0.8 II

Recover

Item no.: 426947-0000-000

DIC slider LCI PN 25x/0.8 II

Item Number: 426947-0000-000

DIC slider LCI PN 25x/0.8 II

Item has been added to the configuration

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Recover

Item no.: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item Number: 426940-0000-000

DIC slider EC PN 10x/0.30 I, 20x/0.50 II, PA 20x/0.80 II

Item has been added to the configuration

DIC slider Plan-Apo 10x/0.45 II

Recover

Item no.: 000000-1045-073

DIC slider Plan-Apo 10x/0.45 II

Item Number: 000000-1045-073

DIC slider Plan-Apo 10x/0.45 II

DIC slider 100x for reflected light

Item has been added to the configuration

DIC slider EC EP 100x/0.8 Epi+

Recover

Item no.: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item Number: 426968-9040-000

DIC slider EC EP 100x/0.8 Epi+

Item has been added to the configuration

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Recover

Item no.: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

Item Number: 000000-1170-902

DIC slider EC EPN 100x/0.90/50x/0.80 HC/LD EC EPN 100x/0.75

DIC slider type 0

Item has been added to the configuration

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Recover

Item no.: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Item Number: 426960-0000-000

DIC slider EC PN 5x/0.16 0, W N-ACP 10x/0.3 I

Polarizers D

Item has been added to the configuration

Polarizer D, rotatable with color glass carrier

Recover

Item no.: 000000-1121-813

Polarizer D, rotatable with color glass carrier

Item Number: 000000-1121-813

Polarizer D, rotatable with color glass carrier

Item has been added to the configuration

Polarizer D with 2-position filter changer

Recover

Item no.: 000000-1005-864

Polarizer D with 2-position filter changer

Item Number: 000000-1005-864

Polarizer D with 2-position filter changer

C-DIC/TIC sliders and prisms

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Recover

Item no.: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x

Item Number: 000000-1105-193

C-DIC slider 6x20 for EC EPN 50x-100x/LD EC EPN 100x with rotary slide-in DIC prism

Item has been added to the configuration

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Recover

Item no.: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x

Item Number: 000000-1105-192

C-DIC slider 6x20 for EC EPN 5x-20x/LD EC EPN 20x-50x/EC EP 5x-100x with rotary slide-in DIC prism

Item has been added to the configuration

TIC slider 6x20

Recover

Item no.: 000000-1105-190

TIC slider 6x20

Item Number: 000000-1105-190

TIC slider 6x20 with rotary slide-in DIC prism for the measurement of step heights

Stages and accessories (60)

Square stages

Item has been added to the configuration

Specimen stage 250x230 mm with hardcoat anodized surface

Recover

Item no.: 432017-9901-000

Specimen stage 250x230 mm with hardcoat anodized surface

Item Number: 432017-9901-000

Specimen stage 250x230 mm with hardcoat anodized surface

Specimen holders

Item has been added to the configuration

Mounting frame M for microtest plates 60, 72 and 120 positions

Recover

Item no.: 471747-0000-000

Mounting frame M for microtest plates 60, 72 and 120 positions

Item Number: 471747-0000-000

Mounting frame M for microtest plates 60, 72 and 120 positions for HLA with adhesive scales

Item has been added to the configuration

Mounting frame M for microtiter plates 96 positions

Recover

Item no.: 471746-0000-000

Mounting frame M for microtiter plates 96 positions

Item Number: 471746-0000-000

Mounting frame M for microtiter plates 96 positions with adhesive scales

Item has been added to the configuration

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Recover

Item no.: 471744-0000-000

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Item Number: 471744-0000-000

Mounting frame M for multitest dishes 133.5 x 88.5 mm

Item has been added to the configuration

Mounting frame M for specimen slider 76x26

Recover

Item no.: 471719-0000-000

Mounting frame M for specimen slider 76x26

Item Number: 471719-0000-000

Mounting frame M for specimen slider 76x26

Item has been added to the configuration

Universal mounting frame M

Recover

Item no.: 471718-0000-000

Universal mounting frame M

Item Number: 471718-0000-000

Universal mounting frame M for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm)

Item has been added to the configuration

Universal mounting frame M-X

Recover

Item no.: 471717-0000-000

Universal mounting frame M-X

Item Number: 471717-0000-000

Universal mounting frame M-X for: - multitest dishes with foot print 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm

Item has been added to the configuration

Universal mounting frame K-X

Recover

Item no.: 451353-0000-000

Universal mounting frame K-X

Item Number: 451353-0000-000

Universal mounting frame K-X for: - multitest dishes with footprint 124...133 x 83...88 mm - Petri dishes dia. 87...92 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame K

Recover

Item no.: 451352-0000-000

Universal mounting frame K

Item Number: 451352-0000-000

Universal mounting frame K for: - Petri dishes dia. 24...68 mm - slides (max. length 120 mm) frame size 160 x 110 mm

Item has been added to the configuration

Mounting frame K for reflected light, d=72mm

Recover

Item no.: 451344-0000-000

Mounting frame K for reflected light, d=72mm

Item Number: 451344-0000-000

Mounting frame K for reflected light, d=72mm frame size 160 x 110 mm

Item has been added to the configuration

Mounting Frame K for specimen slider 76x26 mm

Recover

Item no.: 451341-0000-000

Mounting Frame K for specimen slider 76x26 mm

Item Number: 451341-0000-000

Mounting Frame K for specimen slider 76x26 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame K-M

Recover

Item no.: 432341-9100-000

Universal mounting frame K-M

Item Number: 432341-9100-000

Universal mounting frame K-M for multiwell plates of different manufacturers. - Three adjustable clamping springs for adaption to different plate sizes - base frame for Click-In System - four silicone sealed channels for the lead- through of tubes or cables - CO2/O2 incubation with CO2-cover HM - foot print 125...127 mm x 83...86 mm

Item has been added to the configuration

Insert for Universal mounting frame K-M, slides and chambers (D)

Recover

Item no.: 432340-9040-000

Insert for Universal mounting frame K-M, slides and chambers (D)

Item Number: 432340-9040-000

Insert for Universal mounting frame K-M, slides and chambers (D) - for object slides 76x26 mm - for chambers (ibidi® µ-SlideTM, Nunc® Lab-TekTM / Lab-TekTM II) - suitable for CO2-incubation with CO2-Cover for K-M - for insertion into Universal mounting frame K-M

Item has been added to the configuration

Insert for Universal mounting frame K-M, POC-R2 (D)

Recover

Item no.: 432340-9030-000

Insert for Universal mounting frame K-M, POC-R2 (D)

Item Number: 432340-9030-000

Insert for Universal mounting frame K-M, POC-R2 (D) - for cell cultivation system POC-R2 - suitable for CO2-incubation with CO2-Cover for K-M - for insertion into Universal mounting frame K-M

Item has been added to the configuration

Insert for Universal mounting frame K-M, 2x Petri dish 35 (D)

Recover

Item no.: 432340-9020-000

Insert for Universal mounting frame K-M, 2x Petri dish 35 (D)

Item Number: 432340-9020-000

Insert for Universal mounting frame K-M, 2x Petri dish 35 (D) - for 2x Petri dish dia. 30…40 mm - suitable for CO2-incubation with CO2-Cover for K-M - for insertion into Universal mounting frame K-M

Item has been added to the configuration

Insert for Universal mounting frame K-M, Petri dish 60 (D)

Recover

Item no.: 432340-9010-000

Insert for Universal mounting frame K-M, Petri dish 60 (D)

Item Number: 432340-9010-000

Insert for Universal mounting frame K-M, Petri dish 60 (D) - for 1x Petri dish dia. 47…56 mm - suitable for CO2-incubation with CO2-Cover for K-M - for insertion into Universal mounting frame K-M

Item has been added to the configuration

Insert for Universal mounting frame K-M, Petri dish 35 (D)

Recover

Item no.: 432340-9000-000

Insert for Universal mounting frame K-M, Petri dish 35 (D)

Item Number: 432340-9000-000

Insert for Universal mounting frame K-M, Petri dish 35 (D) - for 1x Petri dish dia. 30…40 mm - suitable for CO2-incubation with CO2-Cover for K-M - for insertion into Universal mounting frame K-M

Item has been added to the configuration

Stage insert Z PIEZO WSB 500 for Heating Inserts P S1 / Mxx S1 (D)

Recover

Item no.: 432339-9051-000

Stage insert Z PIEZO WSB 500 for Heating Inserts P S1 / Mxx S1 (D)

Item Number: 432339-9051-000

Stage insert Z PIEZO WSB 500 for Heating Inserts P S1 / Mxx S1 (D) to insert into Stage attachment Z PIEZO WSB 500 on inverted microscope stands. Fixing to stage attachment through magnets. Applicable for all heating inserts P S1 / M06 S1 ... M96 S1

Item has been added to the configuration

Stage insert Z PIEZO WSB 500 for multi well plates (D)

Recover

Item no.: 432339-9041-000

Stage insert Z PIEZO WSB 500 for multi well plates (D)

Item Number: 432339-9041-000

Stage insert Z PIEZO WSB 500 for multi well plates (D) to insert into Stage attachment Z PIEZO WSB 500 on inverted microscope stands. Fixing in stage attachment through magnets. For plate sizes 84.5 x 126 ... 86 x 128 mm

Item has been added to the configuration

Stage insert Z PIEZO WSB 500 for multi well plates (D)

Recover

Item no.: 432339-9040-000

Stage insert Z PIEZO WSB 500 for multi well plates (D)

Item Number: 432339-9040-000

Stage insert Z PIEZO WSB 500 for multi well plates (D) to insert into Stage attachment Z PIEZO WSB 500 on inverted microscope stands. For plate sizes 84.5 x 126 ... 86 x 128 mm

Item has been added to the configuration

Stage insert Z PIEZO WSB 500 Universal (D)

Recover

Item no.: 432339-9031-000

Stage insert Z PIEZO WSB 500 Universal (D)

Item Number: 432339-9031-000

Stage insert Z PIEZO WSB 500 Universal (D) to insert into Stage attachment Z PIEZO WSB 500 on inverted microscope stands. Fixing in stage attachment through magnets. Applicable for Petri dishes with diameter from 25 ... 60 mm and specimen slides 76 x26 mm

Item has been added to the configuration

Stage attachment Z PIEZO WSB 500 (D)

Recover

Item no.: 432339-9000-000

Stage attachment Z PIEZO WSB 500 (D)

Item Number: 432339-9000-000

Stage attachment Z PIEZO WSB 500 (D) for mechanical and scanning stages Axio Imager and Axio Observer - for mounting on top stage plate - travel range in Z: 500 µm - max speed: 5 mm/sec - resolution: 1 nm - reproducibility: +/- 5 nm - max. load: 2 kg

Item has been added to the configuration

Mounting Frame K for Specimen holder CorrMic LS (D)

Recover

Item no.: 432335-9320-000

Mounting Frame K for Specimen holder CorrMic LS (D)

Item Number: 432335-9320-000

Mounting Frame K for Specimen holder CorrMic LS (D) - frame size 160x110

Item has been added to the configuration

Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9310-000

Specimen holder CorrMic LS for TEM Grids (D) - dimension 76 mm x 26 mm - mounting for 4 TEM Grids, d=3.05 mm - 3 calibration reference points Not compatible with EVO STEM-detector.

Item has been added to the configuration

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Recover

Item no.: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D)

Item Number: 432335-9300-000

Specimen holder CorrMic LS for cover glasses 22x22 mm (D) - dimension 76 mm x 26 mm - mounting for cover glasses 22 mm x 22 mm - 3 calibration reference points - incl. cover glasses high performance, D=0.17mm, 22 x 22 mm, box with 200 pc.

Item has been added to the configuration

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D)

Recover

Item no.: 432335-9210-000

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D)

Item Number: 432335-9210-000

SEM stubs with 1/2" surface and 1/8" pin, 10 pc. (D) with orientation

Item has been added to the configuration

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Recover

Item no.: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D)

Item Number: 432335-9102-000

Specimen holder CorrMic MAT Universal B Rev.2 (D) for mounting various specimens. Mount for three metallurgical specimens: - 1 specimen d=40 mm or 1x d=30 mm via adapter - 2 specimens d=1" or 1x d=1" and via adapter 1x d=1/2" Holder for thin specimens: - mount for 2 SEM stubs with 1" surface and 1/8" pin Delivery content: - incl. SEM stubs with 1" surface and 1/8" pin, 10 pc. - incl. 3 calibration markers for Correlative Microscopy - incl. SEM adapter - incl. Adapter plate 96x86 and installation aid Compatibility: - compatible with airlock 80 mm - compatible with AURIGA Laser 4" Kleinstage

Item has been added to the configuration

Mounting frame K for Specimen holder CorrMic MAT; 160x110 Rev.2 (D)

Recover

Item no.: 432335-9091-000

Mounting frame K for Specimen holder CorrMic MAT; 160x110 Rev.2 (D)

Item Number: 432335-9091-000

Mounting frame K for Specimen holder CorrMic MAT; 160x110 Rev.2 (D) - for use on inverse microscopes - for use on upright microscopes with Prior stage - frame size 160x110

Item has been added to the configuration

Mounting frame K; low profile, for reflected light, d=72 mm

Recover

Item no.: 432334-9001-000

Mounting frame K; low profile, for reflected light, d=72 mm

Item Number: 432334-9001-000

Mounting frame K; low profile, for reflected light, d=72 mm - with heigt adjustable spring clip - max. specimen size 68 x 48 mm - frame size 160 x 110 mm

Item has been added to the configuration

Mounting frame for steel specimen (D)

Recover

Item no.: 432322-9000-000

Mounting frame for steel specimen (D)

Item Number: 432322-9000-000

Mounting frame for steel specimen (D) - frame size 160x116 and 160x110 - for upright and inverted microscopes - for up to six cylindrical metallurgical specimens - specimen diameter from 10 - 40 mm

Item has been added to the configuration

Mounting frame M for plankton dishes, d=40 mm

Recover

Item no.: 419195-9026-000

Mounting frame M for plankton dishes, d=40 mm

Item Number: 419195-9026-000

Mounting frame M for plankton dishes, d=40 mm

Item has been added to the configuration

Heatable universal mounting frame M-H S1 (D)

Recover

Item no.: 411860-9086-000

Heatable universal mounting frame M-H S1 (D)

Item Number: 411860-9086-000

Heatable universal mounting frame M-H S1 (D) - for object traverser - with apertures d=35 mm and 30x10 mm - temperature range of room temperature up to +50°C

Item has been added to the configuration

Heatable universal mounting frame K-H-L S1 (D)

Recover

Item no.: 411860-9082-000

Heatable universal mounting frame K-H-L S1 (D)

Item Number: 411860-9082-000

Heatable universal mounting frame K-H-L S1 (D) - for mechanical stage or scanning stage - with aperture 47x21 mm (central) - for object slides and chamber slides (max. length 120 mm ; max. width 27 mm) - temperature range of room temperature up to +50°C

Item has been added to the configuration

Heatable universal mounting frame K-H S1 (D)

Recover

Item no.: 411860-9080-000

Heatable universal mounting frame K-H S1 (D)

Item Number: 411860-9080-000

Heatable universal mounting frame K-H S1 (D) - for mechanical stage or scanning stage - with apertures d=35 mm and 30x10 mm - for 35 mm and 60 mm petri dishes - temperature range of room temperature up to +50°C

Item has been added to the configuration

Mounting frame K-AM for multiwell plates (D)

Recover

Item no.: 000000-1755-533

Mounting frame K-AM for multiwell plates (D)

Item Number: 000000-1755-533

Mounting frame K-AM for multiwell plates (D) for scanning stage XY DC 100x100 with attachment Z Piezo and scanning stage XY DC 110x90 with attachment Z Piezo/Rot.En. - frame size 160x110mm - for plate footprint 127.5x85mm

Item has been added to the configuration

Universal mounting frame K-Duo

Recover

Item no.: 000000-1116-078

Universal mounting frame K-Duo

Item Number: 000000-1116-078

Universal mounting frame K-Duo for: - 2x Petri dishes dia. 28...56 mm - 1x Petri dish dia. 28...40 mm and 1x slide 76x26 mm frame size 160 x 110 mm

Item has been added to the configuration

Universal mounting frame M-Duo

Recover

Item no.: 000000-1116-077

Universal mounting frame M-Duo

Item Number: 000000-1116-077

Universal mounting frame M-Duo for: - 2x Petri dishes dia. 28...56 mm - 1x Petri dish dia. 28...40 mm and 1x slide 76x26 mm

Item has been added to the configuration

Mounting frame K for multiwell plates (D)

Recover

Item no.: 000000-0496-315

Mounting frame K for multiwell plates (D)

Item Number: 000000-0496-315

Mounting frame K for multiwell plates (D) for scanning stage XY DC 100x100 with attachment Z Piezo and scanning stage XY DC 110x90 w. attachment Z Piezo/Rot.En. for plate footprint 127.5 x 85 mm frame size 160 x 110 mm

Object guides

Item has been added to the configuration

Object guide 130x85 mm left

Recover

Item no.: 000000-1110-991

Object guide 130x85 mm left

Item Number: 000000-1110-991

Object guide 130x85 mm left can be attached to both sides, accepts various mounting frames M

Item has been added to the configuration

Object guide 130x85 mm right

Recover

Item no.: 000000-1005-833

Object guide 130x85 mm right

Item Number: 000000-1005-833

Object guide 130x85 mm right can be attached to both sides, accepts various mounting frames M

Gliding stages

Item has been added to the configuration

Gliding stage Z with stage inserts d=24 and 48mm

Recover

Item no.: 471722-9902-000

Gliding stage Z with stage inserts d=24 and 48mm

Item Number: 471722-9902-000

Gliding stage Z with stage inserts d=24 and 48mm

Various stage accessories

Item has been added to the configuration

Stage insert, metal; 160x110 mm, d=48 mm

Recover

Item no.: 451347-9901-000

Stage insert, metal; 160x110 mm, d=48 mm

Item Number: 451347-9901-000

Stage insert, metal; 160x110 mm, d=48 mm

Item has been added to the configuration

Stage insert, metal; 160x110 mm, d=36 mm

Recover

Item no.: 451346-9901-000

Stage insert, metal; 160x110 mm, d=36 mm

Item Number: 451346-9901-000

Stage insert, metal; 160x110 mm, d=36 mm

Item has been added to the configuration

Stage insert, metal; 160x110 mm, d=28 mm

Recover

Item no.: 451345-9902-000

Stage insert, metal; 160x110 mm, d=28 mm

Item Number: 451345-9902-000

Stage insert, metal; 160x110 mm, d=28 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm Drop Shape

Recover

Item no.: 451328-9010-000

Stage insert, metal; D=72 mm Drop Shape

Item Number: 451328-9010-000

Stage insert, metal; D=72 mm Drop Shape Drop shape aperture (length/width): 20 mm / 10 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=23 mm

Recover

Item no.: 451328-9000-000

Stage insert, metal; D=72 mm, d=23 mm

Item Number: 451328-9000-000

Stage insert, metal; D=72 mm, d=23 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=20 mm

Recover

Item no.: 451327-9901-000

Stage insert, metal; D=72 mm, d=20 mm

Item Number: 451327-9901-000

Stage insert, metal; D=72 mm, d=20 mm

Item has been added to the configuration

Stage insert, metal; D=72 mm, d=10 mm

Recover

Item no.: 451326-9901-000

Stage insert, metal; D=72 mm, d=10 mm

Item Number: 451326-9901-000

Stage insert, metal; D=72 mm, d=10 mm

Item has been added to the configuration

Electronic Coaxial Drive; CAN (D)

Recover

Item no.: 432904-9901-000

Electronic Coaxial Drive; CAN (D)

Item Number: 432904-9901-000

Electronic Coaxial Drive; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - mounted to lower stage plate of stages CAN or docking station - ergonomic use - direct cable connection to CAN stage or stage controller XY STEP SMC 2009

Item has been added to the configuration

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Recover

Item no.: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D)

Item Number: 432335-9341-000

SEM/STEM Adapter for Specimen holder CorrMic LS for TEM Grids (D) compatible to STEM detector and air lock 80 mm

Item has been added to the configuration

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Recover

Item no.: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D)

Item Number: 432335-9331-000

SEM Adapter for Specimen holder CorrMic LS for cover glasses (D) compatible to air lock 80 mm

Heating stages

Item has been added to the configuration

Heating stage S1

Recover

Item no.: 432049-9000-000

Heating stage S1

Item Number: 432049-9000-000

Heating stage S1 - dimensions: 250x230x18 mm - temperature range of room temperature up to +50°C

Mechanical stages

Item has been added to the configuration

Mechanical stage 130x85 R/L with short coaxial drive

Recover

Item no.: 432047-9902-000

Mechanical stage 130x85 R/L with short coaxial drive

Item Number: 432047-9902-000

Mechanical stage 130x85 R/L with short coaxial drive for mounting frames K 160 x 110 mm and Z-PIEZO, particularly recommended in combination with lateral camera port, compatible with objectives autocorr

Item has been added to the configuration

Mechanical stage 40x40, IVF

Recover

Item no.: 432040-9000-000

Mechanical stage 40x40, IVF

Item Number: 432040-9000-000

Mechanical stage 40x40, IVF for Axio Observer for IVF laboratories (Micromanipulation) - manual 3-plate mechanical stage - stage plate 208 x 283 x 18 mm - receptacle for stage inserts D=115 mm - 157 mm coaxial drive, left or right Including: - Intermediate ring M27 - M27 H "5" (6x) - 3x Spacer 13mm for manual stage (3x)

Item has been added to the configuration

Mechanical stage 130x85 R/L

Recover

Item no.: 432016-9902-000

Mechanical stage 130x85 R/L

Item Number: 432016-9902-000

Mechanical stage 130x85 R/L for mounting frames K 160 x 110 mm and Z-PIEZO, compatible with objectives autocorr

Scanning stages

Item has been added to the configuration

Scanning Stage 130x85 MAT; CAN (D)

Recover

Item no.: 432034-9001-000

Scanning Stage 130x85 MAT; CAN (D)

Item Number: 432034-9001-000

Scanning Stage 130x85 MAT; CAN (D) for Axio Observer 3 / 5 / 7 materials - stepper motor drive with 2 mm spindle pitch and integrated controller - direct connection via CAN bus - flat surface for huge specimen - travel range: 130 mm x 85 mm (86 mm x 50 mm with HD-objectives) - adjustable limit switches - max speed: 20 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - tiltable holder for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z Piezo - compatible with Axio Observer A1m/D1m/Z1m and Axiovert 100/135/200

Item has been added to the configuration

Scanning Stage 130x85 mot P; CAN (D)

Recover

Item no.: 432031-9902-000

Scanning Stage 130x85 mot P; CAN (D)

Item Number: 432031-9902-000

Scanning Stage 130x85 mot P; CAN (D) for Axiovert 5/7, Axio Vert.A1, Axio Observer and Axiovert 100/135/200 - stepper motor drive with integrated controller - linear encoders - connection via CAN bus - travel range 130 mm x 85 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute Accuracy: +/- 5 µm - connector for Electronic Coaxial Drive - incl. CAN cable - for mounting frames K 160 x 110 mm and Z-PIEZO

Item has been added to the configuration

Scanning Stage 130x100 STEP (D)

Recover

Item no.: 432029-9904-000

Scanning Stage 130x100 STEP (D)

Item Number: 432029-9904-000

Scanning Stage 130x100 STEP (D) for Axio Observer and Axiovert 200 - stepper motor with 2 mm spindle pitch - connection to stepper controller - travel range 130 mm x 100 mm - stage surface 325 mm x 144 mm - max speed 50 mm/s - resolution: 0.1 µm - reproducibility: +/- 1 µm - absolute accuracy: +/- 5 µm - travel range adjustable - fixed motor cable with exit on stage back side; left - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr

Item has been added to the configuration

Scanning Stage 130x100 PIEZO (D)

Recover

Item no.: 432027-9002-000

Scanning Stage 130x100 PIEZO (D)

Item Number: 432027-9002-000

Scanning Stage 130x100 PIEZO (D) for Axio Observer - with linear encoders and piezo drive - travel range 130 mm x 100 mm - max speed 100 mm/s - resolution: 0.1 µm - reproducibility: +/- 0.6 µm - absolute accuracy: +/- 3 µm - travel range adjustable - for mounting frames K 160 x 110 mm and Z PIEZO - compatible with objectives autocorr - compatible with AI Sample Finder

Item has been added to the configuration

Scanning stage XY DC 110x90 w. attachment Z Piezo/Rot.En. Rev.4 (D)

Recover

Item no.: 000000-0538-386

Scanning stage XY DC 110x90 w. attachment Z Piezo/Rot.En. Rev.4 (D)

Item Number: 000000-0538-386

Scanning stage XY DC 110x90 w. attachment Z Piezo/Rot.En. Rev.4 (D) for Axio Observer and mounting frames K; compatible with Definite Focus. With DC drive and rotary encoder for XY and high precision Piezo attachment for Z. Specification for X/Y: - travel range: 110x90 mm - max speed: 7 mm/sec - resolution: 0.1 µm - reproducibility: +/- 1 µm Specification for Z: - travel range: 150 µm (+/-5%) - max speed: 5 mm/sec - resolution: 2.2 nm - reproducibility: +/- 5 nm - max load: 1000 g consisting of: - Scanning stage XY DC 110x90 with attachment Z Piezo - XYZ stage controller DC / Piezo with Joystick for XY and Control Wheel for manual operation of Z - LCD display for XYZ, button "Zero" and "Home" for simple stand alone operations - Universal mounting frame - motor cables and RS232 cable - power supply 90 - 240 V / 40 - 60 Hz

Tubes and accessories (3)

Binocular tubes

Item has been added to the configuration

Binocular tube 45°/23

Recover

Item no.: 425537-0000-000

Binocular tube 45°/23

Item Number: 425537-0000-000

Binocular tube 45°/23 with manual shutter

Binocular phototubes

Item has been added to the configuration

Binocular phototube 45°/23 with sliding prism

Recover

Item no.: 425536-0000-000

Binocular phototube 45°/23 with sliding prism

Item Number: 425536-0000-000

Binocular phototube 45°/23 with sliding prism (100 % vis : 0% doc / 0% vis : 100% doc / 50% vis : 50% doc) with Bertrand lens and manual shutter for VIS, camera port with interface 60N

Binocular ergotubes

Item has been added to the configuration

Binocular ergotube 25°/23, 50 mm horizontal adjustment

Recover

Item no.: 425535-0000-000

Binocular ergotube 25°/23, 50 mm horizontal adjustment

Item Number: 425535-0000-000

Binocular ergotube 25°/23, 50 mm horizontal adjustment with Bertrand lens and manual shutter for VIS

Optovar systems (3)

Optovar modules

Item has been added to the configuration

Optovar 1.6x

Recover

Item no.: 000000-1268-705

Optovar 1.6x

Item Number: 000000-1268-705

Optovar 1.6x

Item has been added to the configuration

Optovar 1.25x

Recover

Item no.: 000000-1145-667

Optovar 1.25x

Item Number: 000000-1145-667

Optovar 1.25x

Item has been added to the configuration

Optovar 2.5x

Recover

Item no.: 000000-1005-856

Optovar 2.5x

Item Number: 000000-1005-856

Optovar 2.5x

Filters (95)

Fluorescence filter set pix

Item has been added to the configuration

Filter Set 121 mCherry

Recover

Item no.: 489121-9100-000

Filter Set 121 mCherry

Item Number: 489121-9100-000

Filter Set 121 mCherry Consisting of: EX BP 555/30 BS 583 EM BP 640/86

Item has been added to the configuration

Filter Set 118 YFP

Recover

Item no.: 489118-9100-000

Filter Set 118 YFP

Item Number: 489118-9100-000

Filter Set 118 YFP Consisting of: EX BP 508/20 BS 525 EM BP 555/46

Item has been added to the configuration

Filter Set 117 FRET GFP/mCherry for filter wheels

Recover

Item no.: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels

Item Number: 489117-9140-000

Filter Set 117 FRET GFP/mCherry for filter wheels for use with excitation and emission filter wheel Consisting of: EX BP 469/38 (GFP/FRET) EX BP 555/30 (mCherry) BS 495 (GFP) BS 583 (mCherry) EM BP 525/50 (GFP) EM BP 640/86 (mCherry/FRET)

Item has been added to the configuration

Filter Set 115 Cy7

Recover

Item no.: 489115-9100-000

Filter Set 115 Cy7

Item Number: 489115-9100-000

Filter Set 115 Cy7 Consisting of: EX BP 710/87 BS 760 EM BP 814/91

Item has been added to the configuration

Filter Set 114 FRET CFP/YFP for filter wheels

Recover

Item no.: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels

Item Number: 489114-9140-000

Filter Set 114 FRET CFP/YFP for filter wheels for use with excitation and emission filter wheel Consisting of: EX BP 423/44 (CFP/FRET) EX BP 508/20 (YFP) BS 463 (CFP/FRET) BS 525 (YFP) EM BP 485/35 (CFP) EM BP 555/46 (FRET)

Item has been added to the configuration

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9130-000

Filter Set 112 MBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM MBP 425/30 + 514/30 + 592/25 + 681/45 + 785/38

Item has been added to the configuration

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9120-000

Filter Set 112 LED SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 112 HE LED (E)

Recover

Item no.: 489112-9110-000

Filter Set 112 HE LED (E)

Item Number: 489112-9110-000

Filter Set 112 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, FITC, DsRed, Cy5 and Cy7 with excitation wavelengths 385, 475, 555, 630 and 735 nm. Contains beam splitter PBS 405 + 493 + 575 + 654 + 761 and emission filter PBP 425/30 + 514/31 + 592/25 + 681/45 + 785/38.

Item has been added to the configuration

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Recover

Item no.: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7

Item Number: 489112-9010-000

Filter Set 112 SBP DAPI+GFP+DsRed+Cy5+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 EX BP 735/40 BS 405 + 493 + 575 + 654 + 761 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45 EM BP 788/38

Item has been added to the configuration

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9130-000

Filter Set 110 MBP DAPI+GFP+AF594+Cy7 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM MBP 425/30 + 524/51 + 634/38 + 785/38

Item has been added to the configuration

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9120-000

Filter Set 110 LED SBP DAPI+GFP+AF594+Cy7 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter Set 110 HE LED (E)

Recover

Item no.: 489110-9111-000

Filter Set 110 HE LED (E)

Item Number: 489110-9111-000

Filter Set 110 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, FITC, mCherry and Cy7 with excitation wavelengths 385, 475, 590 and 735 nm. Contains beam splitter QBS 405 + 493 + 611 + 762 and emission filter QBP 425/30 + 524/51 + 634/38 + 785/38.

Item has been added to the configuration

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Recover

Item no.: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7

Item Number: 489110-9010-000

Filter Set 110 SBP DAPI+GFP+AF594+Cy7 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 EX BP 735/40 BS 405 + 493 + 611 + 762 EM BP 425/30 EM BP 525/50 EM BP 649/65 EM BP 788/38

Item has been added to the configuration

Filter set 109 HE LED (E)

Recover

Item no.: 489109-9110-000

Filter set 109 HE LED (E)

Item Number: 489109-9110-000

Filter set 109 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC and TRITC/Cy3 with excitation wavelengths 385, 475 and 555 nm. Contains beam splitter TBS 405 + 493 + 575 and emission filter TBP 425/29 + 514/31 + 632/100.

Item has been added to the configuration

Filter set 108 HE LED (E)

Recover

Item no.: 489108-9110-000

Filter set 108 HE LED (E)

Item Number: 489108-9110-000

Filter set 108 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like CFP and YFP with excitation wavelengths 425 and 510 nm. Contains beam splitter DBS 450 + 538 and emission filter DBP 467/24 + 598/110.

Item has been added to the configuration

Filter Set 96 HE BFP shift free (E)

Recover

Item no.: 489096-9100-000

Filter Set 96 HE BFP shift free (E)

Item Number: 489096-9100-000

Filter Set 96 HE BFP shift free (E) EX BP 390/40, BS FT 420, EM BP 450/40

Item has been added to the configuration

Filter Set 92 MBP DAPI+GFP+AF594

Recover

Item no.: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594

Item Number: 489092-9130-000

Filter Set 92 MBP DAPI+GFP+AF594 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM MBP 425/30 + 524/50 + 688/145

Item has been added to the configuration

Filter Set 92 LED SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594

Item Number: 489092-9120-000

Filter Set 92 LED SBP DAPI+GFP+AF594 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter set 92 HE LED (E)

Recover

Item no.: 489092-9110-000

Filter set 92 HE LED (E)

Item Number: 489092-9110-000

Filter set 92 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like DAPI, GFP and mCherry with excitation wavelengths 385, 475 and 590 nm. Contains beam splitter TBS 405 + 493 + 610 and emission filter TBP 425/30 + 524/50 + 688/145.

Item has been added to the configuration

Filter Set 92 SBP DAPI+GFP+AF594

Recover

Item no.: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594

Item Number: 489092-9010-000

Filter Set 92 SBP DAPI+GFP+AF594 for use with exciation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 591/27 BS 405 + 493 + 610 EM BP 425/30 EM BP 525/50 EM BP 649/65

Item has been added to the configuration

Filter Set 91 MBP CFP+YFP+AF594

Recover

Item no.: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594

Item Number: 489091-9130-000

Filter Set 91 MBP CFP+YFP+AF594 for use with excitation filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM MBP 467/24 + 555/25 + 687/145

Item has been added to the configuration

Filter Set 91 LED SBP CFP+YFP+AF594

Recover

Item no.: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594

Item Number: 489091-9120-000

Filter Set 91 LED SBP CFP+YFP+AF594 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter set 91 HE LED (E)

Recover

Item no.: 489091-9110-000

Filter set 91 HE LED (E)

Item Number: 489091-9110-000

Filter set 91 HE LED (E) for use with the illumination system Colibri 7. Suitable for fluorescent dyes like CFP, YFP and mCherry with excitation wavelengths 430, 511 and 590 nm. Contains beam splitter TBS 450 + 538 + 610 and emission filter TBP 467/24 + 555/25 + 687/145.

Item has been added to the configuration

Filter Set 91 SBP CFP+YFP+AF594

Recover

Item no.: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594

Item Number: 489091-9010-000

Filter Set 91 SBP CFP+YFP+AF594 for use with excitation and emission filter wheel Consisting of: EX BP 423/44 EX BP 508/20 EX BP 591/27 BS 450 + 538 + 610 EM BP 467/24 EM BP 558/25 EM BP 649/65

Item has been added to the configuration

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9130-000

Filter Set 90 MBP DAPI+GFP+DsRed+Cy5 for use with excitation filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM MBP 425/30 + 514/30 + 592/25 + 709/100

Item has been added to the configuration

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9120-000

Filter Set 90 LED SBP DAPI+GFP+DsRed+Cy5 for use with Colibri 5/7 and emission filter wheel Consisting of: BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter set 90 HE LED (E)

Recover

Item no.: 489090-9110-000

Filter set 90 HE LED (E)

Item Number: 489090-9110-000

Filter set 90 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like DAPI, FITC, TRITC and Cy5 with excitation wavelengths 385, 475, 555 and 630 nm. Contains beam splitter QBS 405 + 493 + 575 + 653 and emission filter QBP 425/30 + 514/30 + 592/25 + 709/100.

Item has been added to the configuration

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Recover

Item no.: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E)

Item Number: 489090-9100-000

Filter set 90 HE ms DAPI+FITC+TRITC+Cy5 shift free (E) for excitation with multi spectral light sources. Consisting of EX BP 385/30 for DAPI EX BP 469/38 for FITC EX BP 555/30 for TRITC EX BP 631/33 for Cy5 QBS 405+493+575+653 EM QBP 425/30+514/30+592/25+709/100

Item has been added to the configuration

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Recover

Item no.: 489090-9010-000

Filtersatz 90 SBP DAPI+GFP+DsRed+Cy5

Item Number: 489090-9010-000

Filter Set 90 SBP DAPI+GFP+DsRed+Cy5 for use with excitation and emission filter wheel Consisting of: EX BP 385/30 EX BP 469/38 EX BP 555/30 EX BP 631/33 BS 405 + 493 + 575 + 653 EM BP 425/30 EM BP 514/30 EM BP 592/25 EM BP 681/45

Item has been added to the configuration

Filter set 87 HE (405nm) shift free (E)

Recover

Item no.: 489087-0000-000

Filter set 87 HE (405nm) shift free (E)

Item Number: 489087-0000-000

Filter set 87 HE (405nm) shift free (E) EX BP 406/32, BS FT 427, EM BP 459/25

Item has been added to the configuration

Filter set 85 HE (445nm) shift free (E)

Recover

Item no.: 489085-0000-000

Filter set 85 HE (445nm) shift free (E)

Item Number: 489085-0000-000

Filter set 85 HE (445nm) shift free (E) EX BP 445/25, BS FT 463, EM BP 506/75

Item has been added to the configuration

Filter set 84 HE (445+515+638nm) shift free (E)

Recover

Item no.: 489084-0000-000

Filter set 84 HE (445+515+638nm) shift free (E)

Item Number: 489084-0000-000

Filter set 84 HE (445+515+638nm) shift free (E) EX TBP 434/40+517/18+640/22, BS TFT 460+532+659, EM TBP 482/34+576/78+688/45

Item has been added to the configuration

Filter set 79 HE ms GFP+mRFP dual camera (E)

Recover

Item no.: 489079-9010-000

Filter set 79 HE ms GFP+mRFP dual camera (E)

Item Number: 489079-9010-000

Filter set 79 HE ms GFP+mRFP dual camera (E) for excitation with multi spectral light sources. Consisting of EX BP 470/27 for GFP EX BP 556/25 for mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter set 79 HE wl GFP+mRFP dual camera (E)

Recover

Item no.: 489079-9000-000

Filter set 79 HE wl GFP+mRFP dual camera (E)

Item Number: 489079-9000-000

Filter set 79 HE wl GFP+mRFP dual camera (E) for excitation with white light sources. Consisting of EX DBP 470/27+556/25 for GFP and mRFP main beam splitter DFT 490+575 secondary beam splitter FT 565 EM BP 512/30 and EM BP 630/98

Item has been added to the configuration

Filter set 78 HE ms CFP+YFP dual camera (E)

Recover

Item no.: 489078-9010-000

Filter set 78 HE ms CFP+YFP dual camera (E)

Item Number: 489078-9010-000

Filter set 78 HE ms CFP+YFP dual camera (E) for excitation with multi spectral light sources. Consisting of EX BP 445/25 for CFP EX BP 510/15 for YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter set 78 HE wl CFP+YFP dual camera (E)

Recover

Item no.: 489078-9000-000

Filter set 78 HE wl CFP+YFP dual camera (E)

Item Number: 489078-9000-000

Filter set 78 HE wl CFP+YFP dual camera (E) for excitation with white light sources. Consisting of EX DBP 445/25+510/15 for CFP and YFP main beam splitter DFT 460+520 secondary beam splitter FT 510 EM BP 480/22 and EM LP 530

Item has been added to the configuration

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E)

Recover

Item no.: 489077-0000-000

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E)

Item Number: 489077-0000-000

Filter set 77 HE GFP+mRFP+Alexa 633 shift free (E) EX TBP 483+564+642; BS TFT 506+582+659; EM TBP 526+601+688

Item has been added to the configuration

Filter set 74 HE GFP+mRFP shift free (E)

Recover

Item no.: 489074-0000-000

Filter set 74 HE GFP+mRFP shift free (E)

Item Number: 489074-0000-000

Filter set 74 HE GFP+mRFP shift free (E) EX DBP 480/30+565/25; BS DFT 505+583; EM DBP 525/31+616/57

Item has been added to the configuration

Filter set 70 HE Alexa 430 shift free (E)

Recover

Item no.: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E)

Item Number: 489070-0000-000

Filter set 70 HE Alexa 430 shift free (E) EX BP 430/60, BS FT 500, EM BP 550/100

Item has been added to the configuration

Filter set 64 HE mPlum shift free (E)

Recover

Item no.: 489064-0000-000

Filter set 64 HE mPlum shift free (E)

Item Number: 489064-0000-000

Filter set 64 HE mPlum shift free (E) EX BP 587/25, BS FT 605, EM BP 647/70

Item has been added to the configuration

Filter set 63 HE mRFP shift free (E)

Recover

Item no.: 489063-0000-000

Filter set 63 HE mRFP shift free (E)

Item Number: 489063-0000-000

Filter set 63 HE mRFP shift free (E) EX BP 572/25, BS FT 590, EM BP 629/62

Item has been added to the configuration

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Recover

Item no.: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E)

Item Number: 489062-9901-000

Filter set 62 HE BFP + GFP + HcRed shift free (E) optimized for use with the illumination system Colibri EX BP 370/40 o. BP 474/28 o. BP 585/35 BS TFT 395+495+610 EM DBP 425/46+527/54+LP 615

Item has been added to the configuration

Filter Set 56 MBP GFP+DsRed

Recover

Item no.: 489056-9130-000

Filter Set 56 MBP GFP+DsRed

Item Number: 489056-9130-000

Filter Set 56 MBP GFP+DsRed for use with excitation filter wheel Consisting of: EX BP 469/38 EX BP 540-570 BS 490 + 575 EM MBP 513/28 + 630/98

Item has been added to the configuration

Filter Set 56 LED SBP GFP+DsRed

Recover

Item no.: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed

Item Number: 489056-9120-000

Filter Set 56 LED SBP GFP+DsRed for use with Colibri 5/7 and emission filter wheel Consisting of: BS 490 + 575 EM BP 514/30 EM BP 630/98

Item has been added to the configuration

Filter set 56 HE LED (E)

Recover

Item no.: 489056-9110-000

Filter set 56 HE LED (E)

Item Number: 489056-9110-000

Filter set 56 HE LED (E) for use with the illumination system Colibri 5/7. Suitable for fluorescent dyes like GFP and DsRed with excitation wavelengths 475 and 555 nm. Contains beam splitter DBS 490 + 575 and emission filter DBP 512/30 + 630/98.

Item has been added to the configuration

Filter Set 56 SBP GFP+DsRed

Recover

Item no.: 489056-9010-000

Filter Set 56 SBP GFP+DsRed

Item Number: 489056-9010-000

Filter Set 56 SBP GFP+DsRed for use with excitation and emission filter wheel Consisting of: EX BP 469/38 EX BP 555/30 BS 490 + 575 EM BP 514/30 EM BP 630/98

Item has been added to the configuration

Filter set 56 HE GFP + DsRed shift free (E)

Recover

Item no.: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E)

Item Number: 489056-0000-000

Filter set 56 HE GFP + DsRed shift free (E) EX (GFP) BP 470/27, EX (DsRed) BP 556/25, BS DFT 490+575, EM DBP 512/30+630/98

Item has been added to the configuration

Filter set 47 HE CFP shift free (E)

Recover

Item no.: 489047-9901-000

Filter set 47 HE CFP shift free (E)

Item Number: 489047-9901-000

Filter set 47 HE CFP shift free (E) EX BP 436/25, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter set 46 HE YFP shift free (E)

Recover

Item no.: 489046-9901-000

Filter set 46 HE YFP shift free (E)

Item Number: 489046-9901-000

Filter set 46 HE YFP shift free (E) EX BP 500/25, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter set 43 HE Cy 3 shift free (E)

Recover

Item no.: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E)

Item Number: 489043-9901-000

Filter set 43 HE Cy 3 shift free (E) EX BP 550/25, BS FT 570, EM BP 605/70

Item has been added to the configuration

Filter set 38 HE eGFP shift free (E)

Recover

Item no.: 489038-9901-000

Filter set 38 HE eGFP shift free (E)

Item Number: 489038-9901-000

Filter set 38 HE eGFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50

Item has been added to the configuration

Filter set 25 HE shift free (E)

Recover

Item no.: 489025-0000-000

Filter set 25 HE shift free (E)

Item Number: 489025-0000-000

Filter set 25 HE shift free (E) EX TBP 405+495+575, BS TFT 435+510+600, EM TBP 460+530+625

Item has been added to the configuration

Filter set 21 HE Fura 2 shift free (E)

Recover

Item no.: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E)

Item Number: 489021-0000-000

Filter set 21 HE Fura 2 shift free (E) EX BP 340/30, EX BP 387/15, BS FT 409, EM BP 510/90

Item has been added to the configuration

Filter set 20 HE Rhodamin shift free (E)

Recover

Item no.: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E)

Item Number: 489020-0000-000

Filter set 20 HE Rhodamin shift free (E) EX BP 546/12, BS FT 560, EM BP 607/80

Item has been added to the configuration

Filter Set 106 (E)

Recover

Item no.: 488106-9100-000

Filter Set 106 (E)

Item Number: 488106-9100-000

Filter Set 106 (E) EX BP 420/40, BS FT 465, EM LP 470/00 Filter set for fluorometric quantification of rock samples.

Item has been added to the configuration

Filter set 95 eGFP+mCherry shift free (E)

Recover

Item no.: 488095-9100-000

Filter set 95 eGFP+mCherry shift free (E)

Item Number: 488095-9100-000

Filter set 95 eGFP+mCherry shift free (E) EX DBP 475/20+583/25, DBS FT 495+600, EM DBP 518/25+625/30

Item has been added to the configuration

Filterset 71 shift free (E)

Recover

Item no.: 488071-0000-000

Filterset 71 shift free (E)

Item Number: 488071-0000-000

Filterset 71 shift free (E) EX BP 592/24, BS FT 615, EM BP 675/100

Item has been added to the configuration

Filter set 50 Cy 5 shift free (E)

Recover

Item no.: 488050-9901-000

Filter set 50 Cy 5 shift free (E)

Item Number: 488050-9901-000

Filter set 50 Cy 5 shift free (E) EX BP 640/30, BS FT 660, EM BP 690/50

Item has been added to the configuration

Filter set 49 DAPI shift free (E)

Recover

Item no.: 488049-9901-000

Filter set 49 DAPI shift free (E)

Item Number: 488049-9901-000

Filter set 49 DAPI shift free (E) EX G 365, BS FT 395, EM BP 445/50

Item has been added to the configuration

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Recover

Item no.: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F)

Item Number: 488025-0000-000

Filter set 25 DAPI + FITC + Texas Red shift free (F) EX TBP 400+495+570, BS FT 410+505+585, EM TBP 460+530+625

Item has been added to the configuration

Filter set 20 Rhodamin shift free (F)

Recover

Item no.: 488020-9901-000

Filter set 20 Rhodamin shift free (F)

Item Number: 488020-9901-000

Filter set 20 Rhodamin shift free (F) EX BP 546/12, BS FT 560, EM BP 575-640

Item has been added to the configuration

Filter set 15 shift free (F)

Recover

Item no.: 488015-0000-000

Filter set 15 shift free (F)

Item Number: 488015-0000-000

Filter set 15 shift free (F) EX BP 546/12, BS FT 580, EM LP 590

Item has been added to the configuration

Filter set 14 shift free (F)

Recover

Item no.: 488014-0000-000

Filter set 14 shift free (F)

Item Number: 488014-0000-000

Filter set 14 shift free (F) EX BP 510-560, BS FT 580, EM LP 590

Item has been added to the configuration

Filter set 10 shift free (F)

Recover

Item no.: 488010-9901-000

Filter set 10 shift free (F)

Item Number: 488010-9901-000

Filter set 10 shift free (F) EX BP 450-490, BS FT 510, EM BP 515-565

Item has been added to the configuration

Filter set 09 shift free (F)

Recover

Item no.: 488009-9901-000

Filter set 09 shift free (F)

Item Number: 488009-9901-000

Filter set 09 shift free (F) EX BP 450-490, BS FT 510, EM LP 515

Item has been added to the configuration

Filter set 02 shift free (F)

Recover

Item no.: 488002-9901-000

Filter set 02 shift free (F)

Item Number: 488002-9901-000

Filter set 02 shift free (F) EX G 365, BS FT 395, EM LP 420

Item has been added to the configuration

Filter set 01 shift free (F)

Recover

Item no.: 488001-9901-000

Filter set 01 shift free (F)

Item Number: 488001-9901-000

Filter set 01 shift free (F) EX BP 365/12, BS FT 395, EM LP 397

Item has been added to the configuration

Filter set 00 shift free (F)

Recover

Item no.: 488000-0000-000

Filter set 00 shift free (F)

Item Number: 488000-0000-000

Filter set 00 shift free (F) EX BP 530-585, BS FT 600, EM LP 615

Item has been added to the configuration

Filter set 48 FRET CFP/YFP shift free (E)

Recover

Item no.: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E)

Item Number: 000000-1196-684

Filter set 48 FRET CFP/YFP shift free (E) EX BP 436/20, BS FT 455, EM BP 535/30

Item has been added to the configuration

Filter set 47 CFP shift free (E)

Recover

Item no.: 000000-1196-682

Filter set 47 CFP shift free (E)

Item Number: 000000-1196-682

Filter set 47 CFP shift free (E) EX BP 436/20, BS FT 455, EM BP 480/40

Item has been added to the configuration

Filter set 46 YFP shift free (E)

Recover

Item no.: 000000-1196-681

Filter set 46 YFP shift free (E)

Item Number: 000000-1196-681

Filter set 46 YFP shift free (E) EX BP 500/20, BS FT 515, EM BP 535/30

Item has been added to the configuration

Filter set 45 HQ TexasRed, d=25 shift free (E)

Recover

Item no.: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E)

Item Number: 000000-1114-462

Filter set 45 HQ TexasRed, d=25 shift free (E) EX BP 560/40, BS FT 585, EM BP 630/75

Item has been added to the configuration

Filter set 44 FITC special, d=25 shift free (E)

Recover

Item no.: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E)

Item Number: 000000-1114-459

Filter set 44 FITC special, d=25 shift free (E) EX BP 475/40, BS FT 500, EM BP 530/50

Item has been added to the configuration

Filter set 43 Cy 3, d=25 shift free (E)

Recover

Item no.: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E)

Item Number: 000000-1114-101

Filter set 43 Cy 3, d=25 shift free (E) EX BP 545/25, BS FT 570, EM BP 605/70

Item has been added to the configuration

Filter set 31 Cy 3.5 shift free (E)

Recover

Item no.: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E)

Item Number: 000000-1031-350

Filter set 31 Cy 3.5 shift free (E) EX BP 565/30, BS FT 585, EM BP 620/60

Item has been added to the configuration

Filter set 38 Endow GFP shift free (E)

Recover

Item no.: 000000-1031-346

Filter set 38 Endow GFP shift free (E)

Item Number: 000000-1031-346

Filter set 38 Endow GFP shift free (E) EX BP 470/40, BS FT 495, EM BP 525/50

Fluorescence filter set

Item has been added to the configuration

Filter set 52 HE (488nm) shift free (E)

Recover

Item no.: 489052-0000-000

Filter set 52 HE (488nm) shift free (E)

Item Number: 489052-0000-000

Filter set 52 HE (488nm) shift free (E) EX BP 488/20, BS FT 505, EM BP 530/50

Neutral density filter

Item has been added to the configuration

Neutral-density filter 0.25; d=32x2

Recover

Item no.: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item Number: 467849-0000-000

Neutral-density filter 0.25; d=32x2

Item has been added to the configuration

Neutral-density filter 0.06, d=32x2

Recover

Item no.: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item Number: 467848-0000-000

Neutral-density filter 0.06, d=32x2

Item has been added to the configuration

Neutral-density filter 0.10 d=23x1 for reflector module FL EC P&C

Recover

Item no.: 424931-0001-000

Neutral-density filter 0.10 d=23x1 for reflector module FL EC P&C

Item Number: 424931-0001-000

Neutral-density filter 0.10 d=23x1 for reflector module FL EC P&C

Item has been added to the configuration

Neutral-density filter 0.05 for condenser

Recover

Item no.: 424228-9060-000

Neutral-density filter 0.05 for condenser

Item Number: 424228-9060-000

Neutral-density filter 0.05 for condenser - for the use at transmitted-light brightfield with alternating Ph, PlasDIC, iHMC - to be inserted into free position of LD condensers with modulator disk

Heat-reflecting filter

Item has been added to the configuration

Heat protection filter KG 1, d=32x2

Recover

Item no.: 467830-0000-000

Heat protection filter KG 1, d=32x2

Item Number: 467830-0000-000

Heat protection filter KG 1, d=32x2

Interference filter

Item has been added to the configuration

Interference wide-band filter green, d=32x4

Recover

Item no.: 467803-0000-000

Interference wide-band filter green, d=32x4

Item Number: 467803-0000-000

Interference wide-band filter green, d=32x4

Item has been added to the configuration

IF green filter, d=25x4

Recover

Item no.: 447805-9901-000

IF green filter, d=25x4

Item Number: 447805-9901-000

IF green filter, d=25x4

Gray filter

Item has been added to the configuration

Grey filter 0.25, d=25x2

Recover

Item no.: 447836-0000-000

Grey filter 0.25, d=25x2

Item Number: 447836-0000-000

Grey filter 0.25, d=25x2

Item has been added to the configuration

Grey filter 0.06, d=25x2

Recover

Item no.: 447835-0000-000

Grey filter 0.06, d=25x2

Item Number: 447835-0000-000

Grey filter 0.06, d=25x2

Conversion filter

Item has been added to the configuration

Conversion filter 3200-5500K; d=25x2

Recover

Item no.: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item Number: 447825-0000-000

Conversion filter 3200-5500K; d=25x2

Item has been added to the configuration

Conversion filter 5700-3200 K, d=25 mm

Recover

Item no.: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm

Item Number: 427809-9010-000

Conversion filter 5700-3200 K, d=25 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

Conversion filter 5700-3200 K, d=32 mm

Recover

Item no.: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm

Item Number: 427809-9000-000

Conversion filter 5700-3200 K, d=32 mm for adapting the LED light to the color impression of halogen light

Item has been added to the configuration

White-balance filter, d=32x1.5 mm

Recover

Item no.: 000000-1155-789

White-balance filter, d=32x1.5 mm

Item Number: 000000-1155-789

White-balance filter, d=32x1.5 mm for white-light adjustment and contrast enhancement in visual observation

Item has been added to the configuration

Conversion filter CB 8, d=32x2.8

Recover

Item no.: 000000-1024-255

Conversion filter CB 8, d=32x2.8

Item Number: 000000-1024-255

Conversion filter CB 8, d=32x2.8

BP bandpass filter

Item has been added to the configuration

Phosphorescence block filter for LED transmitted-light illumination

Recover

Item no.: 427918-9000-000

Phosphorescence block filter for LED transmitted-light illumination

Item Number: 427918-9000-000

Phosphorescence block filter for LED transmitted-light illumination

Item has been added to the configuration

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Recover

Item no.: 424533-9070-000

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Item Number: 424533-9070-000

IR blocking filter, mounted (BP 400-750 nm), d=32 mm

Color filter

Item has been added to the configuration

Contrast-enhancing blue filter, d=32x2.75 mm

Recover

Item no.: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm

Item Number: 000000-2450-639

Contrast-enhancing blue filter, d=32x2.75 mm for enhanced blue-red contrast, e.g. with HE stained slides

Item has been added to the configuration

Green filter, d=32x2 mm

Recover

Item no.: 000000-1374-896

Green filter, d=32x2 mm

Item Number: 000000-1374-896

Green filter, d=32x2 mm for contrast enhancement for phase contrast and b/w image recording

Video devices (10)

Other video adapters

Item has been added to the configuration

Double Adapter Duolink 60N - 2x 60N man.

Recover

Item no.: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man.

Item Number: 426143-9000-000

Double Adapter Duolink 60N - 2x 60N man. for mounting two cameras and Dual Camera applications. - interface to microscope: 60N - interface to camera: 2x 60N, arranged in parallel - distance of optical axes: 194 mm - mounting orientation: horizontal, vertical - laser safety: via Laser Safety Kit (optional) - manual switching of light path via filter module (1 filter module with 100% mirror included) - slider with calibration sample - slider with bertrand optics for TIRF adjustment - incl. Calibration Slide Universal D=0 - camera exit 2 adjustable in x/y +/- 1.3 mm, z +2/-13 mm relative to image plane of camera exit 1, rotation +/- 3° - max. image field: 22 mm - max. weight load: 5 kg for each camera exit - height-adjustable supports - dimensions: (W x D x H) ca. 280 mm x 310 mm x 170 mm (with supports), 156 mm (without supports) - weight: ca. 6.2 kg

Item has been added to the configuration

Camera Adapter 60N-C 1" 0,8x

Recover

Item no.: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item Number: 426118-9100-000

Camera Adapter 60N-C 1" 0,8x

Item has been added to the configuration

Camera Adapter 60N-C 1" 1.0x

Recover

Item no.: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item Number: 426114-0000-000

Camera Adapter 60N-C 1" 1.0x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Recover

Item no.: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2°

Item Number: 426113-9010-000

Camera Adapter 60N-C 2/3" 0.63x; rotating +/- 2° for fine adjustment of camera rotation. - adjustment range: +/- 2° - maximum weight load: 2 kg

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.63x

Recover

Item no.: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item Number: 426113-0000-000

Camera Adapter 60N-C 2/3" 0.63x

Item has been added to the configuration

Camera Adapter 60N-C 2/3" 0.5x

Recover

Item no.: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item Number: 426112-0000-000

Camera Adapter 60N-C 2/3" 0.5x

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x; adjustable

Recover

Item no.: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable

Item Number: 426105-0000-000

Camera Adapter T2-C 1" 1.0x; adjustable (x,y,z and rotation)

Item has been added to the configuration

Camera Adapter T2-C 1" 1.0x

Recover

Item no.: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item Number: 426104-0000-000

Camera Adapter T2-C 1" 1.0x

Item has been added to the configuration

Adapter 60N - T2 1.0x

Recover

Item no.: 426103-0000-000

Adapter 60N - T2 1.0x

Item Number: 426103-0000-000

Adapter 60N - T2 1.0x

Video adapter 60 C

Item has been added to the configuration

Adapter Video V200 C 2/3" 0.63x at frontport

Recover

Item no.: 000000-1071-171

Adapter Video V200 C 2/3" 0.63x at frontport

Item Number: 000000-1071-171

Adapter Video V200 C 2/3" 0.63x at frontport

Measuring and counting components (5)

Microscope slide, calibratable

Item has been added to the configuration

Calibration Slide Universal CG=0

Recover

Item no.: 474029-9011-000

Calibration Slide Universal CG=0

Item Number: 474029-9011-000

Calibration Slide Universal CG=0 Calibration Slide Universal CG=0 without coverslip; positive version - high-precision object relocation - position of reference mark relative to left and upper slide border X=38mm/Y=13mm, +/- 5µm - line with 50mm length to control parallelism - Stage micrometer functionality Micro and Stemi: 5 lines with 1mm intervals in y-direction 100 lines with 1/100mm intervals in y-direction 25 lines with 1mm intervals in x-direction 50 lines with 1/10mm intervals in x-direction - circle areas with diameter 2.5/1.0/0.5/0.1/0.05/0.01mm - concentrical retangles 8x6/4x3/2x1.5/1x0.75mm

Object micrometer A (custom-made)

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Recover

Item no.: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated

Item Number: 474027-9801-000

Stage micrometer 5mm/5 + 1mm/100 for reflected light, calibrated - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer A

Item has been added to the configuration

Stage micrometer for reflected light 5 + 100/100y d=0mm

Recover

Item no.: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm

Item Number: 474027-0000-000

Stage micrometer for reflected light 5 + 100/100y d=0mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

D SF objective lens micrometer

Item has been added to the configuration

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Recover

Item no.: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated

Item Number: 474026-9801-000

Stage micrometer 5mm/5 + 1mm/100 for transm. light, calibrated - with cover slip d=0.16 mm - 5 mm in 5 divisions, 1 interval = 1 mm - 1 mm in 100 divisions, 1 interval = 0.01 mm - all intervals calibrated - calibration certificate as proof of the traceability to national standards, issued by a DIN EN ISO/IEC 17025 accredited calibration laboratory

Object micrometer D

Item has been added to the configuration

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Recover

Item no.: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm

Item Number: 474026-0000-000

Stage micrometer for transmitted light 5 + 100/100y d=0.16mm - 5 lines with 1mm intervals in y-direction - 100 lines with 1/100mm intervals in y-direction

Eyepieces (6)

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece E-PL 10x/23 Br. foc.

Recover

Item no.: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item Number: 444235-9901-000

Eyepiece E-PL 10x/23 Br. foc.

Item has been added to the configuration

Eyepiece E-PL 10x/20 Br.foc.

Recover

Item no.: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item Number: 444232-9904-000

Eyepiece E-PL 10x/20 Br.foc.

Item has been added to the configuration

Eyepiece PL 10x/23 Br. foc.

Recover

Item no.: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Item Number: 444036-9000-000

Eyepiece PL 10x/23 Br. foc.

Auxiliary microscopes

Item has been added to the configuration

Auxiliary microscope, d=30

Recover

Item no.: 444830-9902-000

Auxiliary microscope, d=30

Item Number: 444830-9902-000

Auxiliary microscope, d=30 to adjust the phase rings and darkfield stop in the condenser

Eyepieces, focusing, 25x

Item has been added to the configuration

Eyepiece W 25x/10 foc.

Recover

Item no.: 455046-9901-000

Eyepiece W 25x/10 foc.

Item Number: 455046-9901-000

Eyepiece W 25x/10 foc.

Eyepieces for spectacle wearers, focusing, 16x

Item has been added to the configuration

Eyepiece PL 16x/16 Br. foc.

Recover

Item no.: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Item Number: 444054-9000-000

Eyepiece PL 16x/16 Br. foc.

Eyepiece accessories (11)

Eyecups

Item has been added to the configuration

Eyepiece eyecup

Recover

Item no.: 444801-0000-000

Eyepiece eyecup

Item Number: 444801-0000-000

Eyepiece eyecup

Eyepiece reticle 26 mm

Item has been added to the configuration

Net micrometer 12,5x12,5/5;10 d=26 mm

Recover

Item no.: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item Number: 474068-0000-000

Net micrometer 12,5x12,5/5;10 d=26 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=26 mm

Recover

Item no.: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item Number: 474066-9901-000

Crossline micrometer 10:100, d=26 mm

Item has been added to the configuration

Crossline graticule, d=26 mm

Recover

Item no.: 474064-0000-000

Crossline graticule, d=26 mm

Item Number: 474064-0000-000

Crossline graticule, d=26 mm

Item has been added to the configuration

Measuring graticule 2x/20:200, d=26 mm

Recover

Item no.: 454089-0000-000

Measuring graticule 2x/20:200, d=26 mm

Item Number: 454089-0000-000

Measuring graticule 2x/20:200, d=26 mm

Item has been added to the configuration

Format reticle MC 2.5x/ d=26 mm

Recover

Item no.: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item Number: 454075-0000-000

Format reticle MC 2.5x/ d=26 mm

Item has been added to the configuration

Crossline micrometer 14:140, d=26 mm

Recover

Item no.: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Item Number: 454060-0000-000

Crossline micrometer 14:140, d=26 mm

Eyepiece reticle 21 mm

Item has been added to the configuration

Net micrometer 10x10/5:10, d=21 mm

Recover

Item no.: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item Number: 454020-0000-000

Net micrometer 10x10/5:10, d=21 mm

Item has been added to the configuration

Crossline micrometer 10:100, d=21 mm

Recover

Item no.: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item Number: 434013-0000-000

Crossline micrometer 10:100, d=21 mm

Item has been added to the configuration

Micrometer 10:100, d=21 mm

Recover

Item no.: 434011-0000-000

Micrometer 10:100, d=21 mm

Item Number: 434011-0000-000

Micrometer 10:100, d=21 mm

Pointer for eyepieces

Item has been added to the configuration

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Recover

Item no.: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Item Number: 000000-1095-418

Fixed pointer, dia. 26mm for eyepieces foc, dia. 30mm

Transmitted-light objectives (160)

A-Plan LD Phase Contrast

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 Ph2 M27

Recover

Item no.: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27

Item Number: 421281-9910-000

Objective LD A-Plan 63x/0.65 Ph2 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27

Recover

Item no.: 421261-9931-710

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27

Item Number: 421261-9931-710

Objective LD A-Plan 40x/0.55 iHMC for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene) for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 iHMC M27

Recover

Item no.: 421261-9931-000

Objective LD A-Plan 40x/0.55 iHMC M27

Item Number: 421261-9931-000

Objective LD A-Plan 40x/0.55 iHMC M27 (FWD=2.3mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph2 M27

Recover

Item no.: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27

Item Number: 421261-9918-000

Objective LD A-Plan 40x/0.55 Ph2 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27

Recover

Item no.: 421261-9917-710

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27

Item Number: 421261-9917-710

Objective LD A-Plan 40x/0.55 Ph1 for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 Ph1 M27

Recover

Item no.: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27

Item Number: 421261-9917-000

Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph2 M27

Recover

Item no.: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27

Item Number: 421251-9911-711

Objective LD A-Plan 20x/0.35 Ph2 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1- M27

Recover

Item no.: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27

Item Number: 421251-9911-710

Objective LD A-Plan 20x/0.35 Ph1- M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 Ph1 M27

Recover

Item no.: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27

Item Number: 421251-9911-000

Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 iHMC M27

Recover

Item no.: 421241-9930-000

Objective LD A-Plan 10x/0.25 iHMC M27

Item Number: 421241-9930-000

Objective LD A-Plan 10x/0.25 iHMC M27 (FWD=8.4mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27

Item Number: 421241-9910-000

Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 Ph1 M27

Recover

Item no.: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27

Item Number: 421231-9910-000

Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD=11.7mm at CG=1mm polystyrene)

A-Plan Polarization Contrast

Item has been added to the configuration

Objective A-Plan 63x/0.8 Pol W0.8"

Recover

Item no.: 441063-9900-000

Objective A-Plan 63x/0.8 Pol W0.8"

Item Number: 441063-9900-000

Objective A-Plan 63x/0.8 Pol W0.8" (WD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Pol W0.8"

Recover

Item no.: 441053-9900-000

Objective A-Plan 40x/0.65 Pol W0.8"

Item Number: 441053-9900-000

Objective A-Plan 40x/0.65 Pol W0.8" (WD=0.43mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Pol W0.8"

Recover

Item no.: 441033-9900-000

Objective A-Plan 10x/0.25 Pol W0.8"

Item Number: 441033-9900-000

Objective A-Plan 10x/0.25 Pol W0.8" (WD=4.2mm)

Item has been added to the configuration

Objective A-Plan 63x/0.8 Pol M27

Recover

Item no.: 421083-9900-000

Objective A-Plan 63x/0.8 Pol M27

Item Number: 421083-9900-000

Objective A-Plan 63x/0.8 Pol M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Pol M27

Recover

Item no.: 421063-9900-000

Objective A-Plan 40x/0.65 Pol M27

Item Number: 421063-9900-000

Objective A-Plan 40x/0.65 Pol M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 Pol M27

Recover

Item no.: 421053-9900-000

Objective A-Plan 20x/0.45 Pol M27

Item Number: 421053-9900-000

Objective A-Plan 20x/0.45 Pol M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Pol M27

Recover

Item no.: 421043-9900-000

Objective A-Plan 10x/0.25 Pol M27

Item Number: 421043-9900-000

Objective A-Plan 10x/0.25 Pol M27 (FWD=4.5mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 Pol M27

Recover

Item no.: 421033-9900-000

Objective A-Plan 5x/0.12 Pol M27

Item Number: 421033-9900-000

Objective A-Plan 5x/0.12 Pol M27 (FWD=10.1mm)

Plan-Apochromat BrightField

Item has been added to the configuration

Objective Plan-Apochromat 20x/0.8

Recover

Item no.: 440640-9903-000

Objective Plan-Apochromat 20x/0.8

Item Number: 440640-9903-000

Objective Plan-Apochromat 20x/0.8 (WD=0.55mm), incl. Cover glasses, high performance, D=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil M27

Recover

Item no.: 420790-9901-000

Objective Plan-Apochromat 100x/1.4 Oil M27

Item Number: 420790-9901-000

Objective Plan-Apochromat 100x/1.4 Oil M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil Iris M27

Recover

Item no.: 420786-9900-000

Objective Plan-Apochromat 63x/1.4 Oil Iris M27

Item Number: 420786-9900-000

Objective Plan-Apochromat 63x/1.4 Oil Iris M27 (FWD=0.19mm), Numerical Aperture adjustable from 0.7 to 1.4, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective alpha Plan-Apochromat 63x/1.46 Oil Corr M27

Recover

Item no.: 420780-9971-000

Objective alpha Plan-Apochromat 63x/1.46 Oil Corr M27

Item Number: 420780-9971-000

Objective alpha Plan-Apochromat 63x/1.46 Oil Corr M27 TIRF (CG=0.14-0.19mm at 23°C or CG=0.15-0.19mm at 37°C) (FWD=0.10mm at CG=0.17mm), incl. Immersol 518 F, oiler 20 ml and Cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil M27

Recover

Item no.: 420780-9900-000

Objective Plan-Apochromat 63x/1.4 Oil M27

Item Number: 420780-9900-000

Objective Plan-Apochromat 63x/1.4 Oil M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/0.95 Corr M27

Recover

Item no.: 420660-9970-000

Objective Plan-Apochromat 40x/0.95 Corr M27

Item Number: 420660-9970-000

Objective Plan-Apochromat 40x/0.95 Corr M27 (FWD=0.25mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 20x/0.8 M27

Recover

Item no.: 420650-9903-000

Objective Plan-Apochromat 20x/0.8 M27

Item Number: 420650-9903-000

Objective Plan-Apochromat 20x/0.8 M27 (FWD=0.55mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc Lead-free

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.45 M27

Recover

Item no.: 420640-9900-000

Objective Plan-Apochromat 10x/0.45 M27

Item Number: 420640-9900-000

Objective Plan-Apochromat 10x/0.45 M27 (FWD=2.1mm)

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.3 M27

Recover

Item no.: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27

Item Number: 420640-9800-000

Objective Plan-Apochromat 10x/0.3 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective Plan-Apochromat 5x/0.16 M27

Recover

Item no.: 420630-9900-000

Objective Plan-Apochromat 5x/0.16 M27

Item Number: 420630-9900-000

Objective Plan-Apochromat 5x/0.16 M27 (FWD=12.1mm)

Plan-Neofluar BrightField

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75

Recover

Item no.: 440350-9903-000

Objective EC Plan-Neofluar 40x/0.75

Item Number: 440350-9903-000

Objective EC Plan-Neofluar 40x/0.75 (WD=0.71mm), incl. Cover glasses, high performance, D=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50

Recover

Item no.: 440340-9904-000

Objective EC Plan-Neofluar 20x/0.50

Item Number: 440340-9904-000

Objective EC Plan-Neofluar 20x/0.50 (WD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Recover

Item no.: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27

Item Number: 420496-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Iris M27 (FWD=0.20mm), Numerical Aperture adjustable from 0.7 to 1.3, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Recover

Item no.: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27

Item Number: 420490-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Recover

Item no.: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27

Item Number: 420480-9901-000

Objective EC Plan-Neofluar 63x/1.25 Oil M27 (FWD=0.10mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Recover

Item no.: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27

Item Number: 420460-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Recover

Item no.: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27

Item Number: 420380-9970-000

Objective EC Plan-Neofluar 63x/0.95 Corr M27 (FWD=0.12mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 M27

Recover

Item no.: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27

Item Number: 420360-9900-000

Objective EC Plan-Neofluar 40x/0.75 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 M27

Recover

Item no.: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27

Item Number: 420350-9900-000

Objective EC Plan-Neofluar 20x/0.50 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 M27

Recover

Item no.: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27

Item Number: 420340-9901-000

Objective EC Plan-Neofluar 10x/0.3 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 M27

Recover

Item no.: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27

Item Number: 420330-9901-000

Objective EC Plan-Neofluar 5x/0.16 M27 (FWD=18.5mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 2.5x/0.085 M27

Recover

Item no.: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27

Item Number: 420320-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 M27 (FWD=8.8mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 420310-9901-000

Objective EC Plan-Neofluar 1.25x/0.03 M27

Item Number: 420310-9901-000

Objective EC Plan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 1x/0.025 M27

Recover

Item no.: 420300-9900-000

Objective EC Plan-Neofluar 1x/0.025 M27

Item Number: 420300-9900-000

Objective EC Plan-Neofluar 1x/0.025 M27 (FWD=3.0mm)

Fluar BrightField

Item has been added to the configuration

Objective Fluar 5x/0.25

Recover

Item no.: 440125-0000-000

Objective Fluar 5x/0.25

Item Number: 440125-0000-000

Objective Fluar 5x/0.25 (WD=12.5mm)

Item has been added to the configuration

Objective alpha Plan-Fluar 100x/1.49 Oil M27

Recover

Item no.: 421190-9800-000

Objective alpha Plan-Fluar 100x/1.49 Oil M27

Item Number: 421190-9800-000

Objective alpha Plan-Fluar 100x/1.49 Oil M27 (FWD=0.08mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Fluar 40x/1.30 Oil M27

Recover

Item no.: 420260-9900-000

Objective Fluar 40x/1.30 Oil M27

Item Number: 420260-9900-000

Objective Fluar 40x/1.30 Oil M27 (FWD=0.16mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Fluar 20x/0.75 M27

Recover

Item no.: 420150-9900-000

Objective Fluar 20x/0.75 M27

Item Number: 420150-9900-000

Objective Fluar 20x/0.75 M27 (FWD=0.60mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Fluar 10x/0.5 M27

Recover

Item no.: 420140-9901-000

Objective Fluar 10x/0.5 M27

Item Number: 420140-9901-000

Objective Fluar 10x/0.5 M27 (WD=1.6mm)

Item has been added to the configuration

Objective Fluar 5x/0.25 M27

Recover

Item no.: 420130-9900-000

Objective Fluar 5x/0.25 M27

Item Number: 420130-9900-000

Objective Fluar 5x/0.25 M27 (FWD=12.5mm)

Item has been added to the configuration

Objective Fluar 2.5x/0.12 M27

Recover

Item no.: 420120-9901-000

Objective Fluar 2.5x/0.12 M27

Item Number: 420120-9901-000

Objective Fluar 2.5x/0.12 M27 (FWD=8.7mm)

C-Apochromat LD

Item has been added to the configuration

Objective LD C-Apochromat 63x/1.15 W Corr M27

Recover

Item no.: 421887-9970-000

Objective LD C-Apochromat 63x/1.15 W Corr M27

Item Number: 421887-9970-000

Objective LD C-Apochromat 63x/1.15 W Corr M27 (CG=0.14-0.19mm) (FWD=0.60mm at CG=0.17mm), UV-VIS-IR incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD C-Apochromat 40x/1.1 W Corr M27

Recover

Item no.: 421867-9970-000

Objective LD C-Apochromat 40x/1.1 W Corr M27

Item Number: 421867-9970-000

Objective LD C-Apochromat 40x/1.1 W Corr M27 (CG=0.14-0.19mm) (FWD=0.62mm at CG=0.17mm), UV-VIS-IR incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

C-Apochromat

Item has been added to the configuration

Objective C-Apochromat 100x/1.25 W Corr M27

Recover

Item no.: 421797-9970-000

Objective C-Apochromat 100x/1.25 W Corr M27

Item Number: 421797-9970-000

Objective C-Apochromat 100x/1.25 W Corr M27 (CG=0.14-0.19mm) (FWD=0.25mm at CG=0.17mm), UV-VIS-IR incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective C-Apochromat 63x/1.2 W autocorr M27

Recover

Item no.: 421787-9971-790

Objective C-Apochromat 63x/1.2 W autocorr M27

Item Number: 421787-9971-790

Objective C-Apochromat 63x/1.2 W autocorr M27 (CG=0.14-0.19mm) (FWD=0.28mm at CG=0.17mm), UV-VIS-IR ACR functionality included. Incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc. With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective C-Apochromat 63x/1.20 W Corr M27

Recover

Item no.: 421787-9970-000

Objective C-Apochromat 63x/1.20 W Corr M27

Item Number: 421787-9970-000

Objective C-Apochromat 63x/1.20 W Corr M27 (CG=0.14-0.19mm) (FWD=0.28mm at CG=0.17mm), UV-VIS-IR incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective C Plan-Apochromat 63x/1,4 Oil DIC M27

Recover

Item no.: 421782-9900-000

Objective C Plan-Apochromat 63x/1,4 Oil DIC M27

Item Number: 421782-9900-000

Objective C Plan-Apochromat 63x/1.4 Oil DIC M27 (FWD=0.14mm), UV-VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective C-Apochromat 40x/1.2 W autocorr M27

Recover

Item no.: 421767-9971-790

Objective C-Apochromat 40x/1.2 W autocorr M27

Item Number: 421767-9971-790

Objective C-Apochromat 40x/1.2 W autocorr M27 (CG=0.14-0.19mm) (FWD=0.28mm at CG=0.17mm), UV-VIS-IR ACR functionality included. Incl. Immersol W, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc. With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective C Plan-Apochromat 40x/1.3 Oil DIC M27

Recover

Item no.: 421762-9900-000

Objective C Plan-Apochromat 40x/1.3 Oil DIC M27

Item Number: 421762-9900-000

Objective C Plan-Apochromat 40x/1.3 Oil DIC M27 (FWD=0.22mm), UV-VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective C-Apochromat 10x/0.45 W M27

Recover

Item no.: 421747-9900-000

Objective C-Apochromat 10x/0.45 W M27

Item Number: 421747-9900-000

Objective C-Apochromat 10x/0.45 W M27 (FWD=1.8mm), incl. Immersol W, bottle 20 ml

Plan-Neofluar LD Phase Contrast

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Recover

Item no.: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27

Item Number: 421381-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr Ph2 M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Recover

Item no.: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27

Item Number: 421361-9971-710

Objective LD Plan-Neofluar 40x/0.6 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Recover

Item no.: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27

Item Number: 421361-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr Ph2 M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Recover

Item no.: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27

Item Number: 421351-9972-000

Objective LD Plan-Neofluar 20x/0.4 Corr Ph2 M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Recover

Item no.: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27

Item Number: 421351-9971-710

Objective LD Plan-Neofluar 20x/0.4 Corr Ph1 Ph2- M27 suitable for positive (Ph1) and negative phase contrast (Ph2-) (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

Plan-Neofluar LD BrightField

Item has been added to the configuration

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Recover

Item no.: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27

Item Number: 421380-9971-000

Objective LD Plan-Neofluar 63x/0.75 Corr M27 (CG=0-1.5mm) (FWD=2.2mm at CG=0mm and FWD=1.2mm at CG=1.5mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27

Recover

Item no.: 421369-9900-000

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27

Item Number: 421369-9900-000

Objective LD Plan-Neofluar 40x/0.4 for Thermo Plate M27 (FWD=2.0mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Recover

Item no.: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27

Item Number: 421360-9971-000

Objective LD Plan-Neofluar 40x/0.6 Corr M27 (CG=0-1.5mm) (FWD=3.3mm at CG=0mm and FWD=2.5mm at CG=1.5mm)

Item has been added to the configuration

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Recover

Item no.: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27

Item Number: 421350-9971-000

Objective LD Plan-Neofluar 20x/0.4 Corr M27 (CG=0-1.5mm) (FWD=8.4mm at CG=0mm and FWD=7.4mm at CG=1.5mm)

A-Plan LD BrightField

Item has been added to the configuration

Objective LD A-Plan 63x0.65 iHMC M27

Recover

Item no.: 421281-9930-000

Objective LD A-Plan 63x0.65 iHMC M27

Item Number: 421281-9930-000

Objective LD A-Plan 63x0.65 iHMC M27 (FWD=1.8mm at CG=1mm polystyrene), for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 for Thermo Plate M27

Recover

Item no.: 421280-9900-710

Objective LD A-Plan 63x/0.65 for Thermo Plate M27

Item Number: 421280-9900-710

Objective LD A-Plan 63x/0.65 for Thermo Plate M27 (FWD=1.1mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 63x/0.65 M27

Recover

Item no.: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27

Item Number: 421280-9900-000

Objective LD A-Plan 63x/0.65 M27 (FWD=1.8mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 for Thermo Plate M27

Recover

Item no.: 421260-9906-710

Objective LD A-Plan 40x/0.55 for Thermo Plate M27

Item Number: 421260-9906-710

Objective LD A-Plan 40x/0.55 for Thermo Plate M27 (FWD=1.5mm at CG=0.5mm glass + CG=1.0mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 40x/0.55 M27

Recover

Item no.: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27

Item Number: 421260-9906-000

Objective LD A-Plan 40x/0.55 M27 (FWD=2.3mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 iHMC M27

Recover

Item no.: 421251-9931-000

Objective LD A-Plan 20x/0.35 iHMC M27

Item Number: 421251-9931-000

Objective LD A-Plan 20x/0.35 iHMC M27 (FWD=4.9mm at CG=1mm polystyrene), suitable for improved Hoffman Modulation Contrast

Item has been added to the configuration

Objective LD A-Plan 20x/0.35 M27

Recover

Item no.: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27

Item Number: 421250-9901-000

Objective LD A-Plan 20x/0.35 M27 (FWD=4.9mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 10x/0.25 M27

Recover

Item no.: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27

Item Number: 421240-9900-000

Objective LD A-Plan 10x/0.25 M27 (FWD=8.5mm at CG=1mm polystyrene)

Item has been added to the configuration

Objective LD A-Plan 5x/0.15 M27

Recover

Item no.: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27

Item Number: 421230-9900-000

Objective LD A-Plan 5x/0.15 M27 (FWD=11.7mm at CG=1mm polystyrene)

A-Plan BrightField

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil D=0 M27

Recover

Item no.: 421094-9900-000

Objective A-Plan 100x/1.25 Oil D=0 M27

Item Number: 421094-9900-000

Objective A-Plan 100x/1.25 Oil D=0 M27 (FWD=0.31mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil M27

Recover

Item no.: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27

Item Number: 421090-9902-000

Objective A-Plan 100x/1.25 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/0.8 M27

Recover

Item no.: 421090-9800-000

Objective A-Plan 100x/0.8 M27

Item Number: 421090-9800-000

Objective A-Plan 100x/0.8 M27 (FWD=0.97mm)

Item has been added to the configuration

Objective A-Plan 63x/0.8 M27

Recover

Item no.: 421080-9900-000

Objective A-Plan 63x/0.8 M27

Item Number: 421080-9900-000

Objective A-Plan 63x/0.8 M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 D=0 M27

Recover

Item no.: 421064-9900-000

Objective A-Plan 40x/0.65 D=0 M27

Item Number: 421064-9900-000

Objective A-Plan 40x/0.65 D=0 M27 (FWD=0.55mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 M27

Recover

Item no.: 421060-9900-000

Objective A-Plan 40x/0.65 M27

Item Number: 421060-9900-000

Objective A-Plan 40x/0.65 M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 M27

Recover

Item no.: 421050-9900-000

Objective A-Plan 20x/0.45 M27

Item Number: 421050-9900-000

Objective A-Plan 20x/0.45 M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 M27

Recover

Item no.: 421040-9900-000

Objective A-Plan 10x/0.25 M27

Item Number: 421040-9900-000

Objective A-Plan 10x/0.25 M27 (FWD=4.5mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 M27

Recover

Item no.: 421030-9900-000

Objective A-Plan 5x/0.12 M27

Item Number: 421030-9900-000

Objective A-Plan 5x/0.12 M27 (FWD=10.1mm)

Item has been added to the configuration

Objective A-Plan 2.5x/0.06 M27

Recover

Item no.: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27

Item Number: 421020-9900-000

Objective A-Plan 2.5x/0.06 M27 (FWD=10.4mm)

A-Plan Phase Contrast

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27

Item Number: 421091-9912-000

Objective A-Plan 100x/1.25 Oil Ph3 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 100x/1.25 Oil Ph2 M27

Recover

Item no.: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27

Item Number: 421091-9811-000

Objective A-Plan 100x/1.25 Oil Ph2 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective A-Plan 63x/0.8 Ph2 M27

Recover

Item no.: 421081-9910-000

Objective A-Plan 63x/0.8 Ph2 M27

Item Number: 421081-9910-000

Objective A-Plan 63x/0.8 Ph2 M27 (FWD=0.30mm)

Item has been added to the configuration

Objective A-Plan 40x/0.65 Ph2 M27

Recover

Item no.: 421061-9910-000

Objective A-Plan 40x/0.65 Ph2 M27

Item Number: 421061-9910-000

Objective A-Plan 40x/0.65 Ph2 M27 (FWD=0.45mm)

Item has been added to the configuration

Objective A-Plan 20x/0.45 Ph2 M27

Recover

Item no.: 421051-9910-000

Objective A-Plan 20x/0.45 Ph2 M27

Item Number: 421051-9910-000

Objective A-Plan 20x/0.45 Ph2 M27 (FWD=0.46mm)

Item has been added to the configuration

Objective A-Plan 10x/0.25 Ph1 M27

Recover

Item no.: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27

Item Number: 421041-9910-000

Objective A-Plan 10x/0.25 Ph1 M27 (FWD=4.3mm)

Item has been added to the configuration

Objective A-Plan 5x/0.12 Ph0 M27

Recover

Item no.: 421031-9910-000

Objective A-Plan 5x/0.12 Ph0 M27

Item Number: 421031-9910-000

Objective A-Plan 5x/0.12 Ph0 M27 (FWD=9.9mm)

Achroplan BrightField

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Iris M27

Recover

Item no.: 420996-9900-000

Objective N-Achroplan 100x/1.25 Oil Iris M27

Item Number: 420996-9900-000

Objective N-Achroplan 100x/1.25 Oil Iris M27 (FWD=0.29mm), Numerical Aperture adjustable from 0.7 to 1.25, incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Recover

Item no.: 420994-9900-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27

Item Number: 420994-9900-000

Objective N-Achroplan 100x/1.25 Oil CG=0 M27 designed for samples without cover glass (FWD=0.45mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil M27

Recover

Item no.: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27

Item Number: 420990-9900-000

Objective N-Achroplan 100x/1.25 Oil M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 63x/0.95 CG=0 M27

Recover

Item no.: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27

Item Number: 420984-9900-000

Objective N-Achroplan 63x/0.95 CG=0 M27 designed for samples without cover glass (FWD=0.17mm)

Item has been added to the configuration

Objective N-Achroplan 63x/0.85 M27

Recover

Item no.: 420980-9900-000

Objective N-Achroplan 63x/0.85 M27

Item Number: 420980-9900-000

Objective N-Achroplan 63x/0.85 M27 (FWD=0.20mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 50x/1.0 Oil M27

Recover

Item no.: 420970-9900-000

Objective N-Achroplan 50x/1.0 Oil M27

Item Number: 420970-9900-000

Objective N-Achroplan 50x/1.0 Oil M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective C-Achroplan 32x/0.85 W Corr M27

Recover

Item no.: 420967-9970-000

Objective C-Achroplan 32x/0.85 W Corr M27

Item Number: 420967-9970-000

Objective C-Achroplan 32x/0.85 W Corr M27 VIS-IR, (FWD=1.1mm at CG=0.17mm) (CG=0-0.17mm)

Item has been added to the configuration

Objective N-Achroplan 40x/0.65 M27

Recover

Item no.: 420960-9901-000

Objective N-Achroplan 40x/0.65 M27

Item Number: 420960-9901-000

Objective N-Achroplan 40x/0.65 M27 (FWD=0.60mm)

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 M27

Recover

Item no.: 420950-9901-000

Objective N-Achroplan 20x/0.45 M27

Item Number: 420950-9901-000

Objective N-Achroplan 20x/0.45 M27 (FWD=0.63mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 M27

Recover

Item no.: 420940-9901-000

Objective N-Achroplan 10x/0.25 M27

Item Number: 420940-9901-000

Objective N-Achroplan 10x/0.25 M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 M27

Recover

Item no.: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27

Item Number: 420930-9901-000

Objective N-Achroplan 5x/0.15 M27 (FWD=12.0mm)

Item has been added to the configuration

Objective N-Achroplan 2.5x/0.07 M27

Recover

Item no.: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27

Item Number: 420920-9901-000

Objective N-Achroplan 2.5x/0.07 M27 (FWD=9.8mm)

Achroplan Phase Contrast

Item has been added to the configuration

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Recover

Item no.: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27

Item Number: 420991-9910-000

Objective N-Achroplan 100x/1.25 Oil Ph3 M27 (FWD=0.29mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 63x/0.85 Ph3 M27

Recover

Item no.: 420981-9910-000

Objective N-Achroplan 63x/0.85 Ph3 M27

Item Number: 420981-9910-000

Objective N-Achroplan 63x/0.85 Ph3 M27 (FWD=0.20mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 50x/1.0 Oil Ph3 M27

Recover

Item no.: 420971-9910-000

Objective N-Achroplan 50x/1.0 Oil Ph3 M27

Item Number: 420971-9910-000

Objective N-Achroplan 50x/1.0 Oil Ph3 M27 (FWD=0.22mm), incl. Immersol 518 N, oiler 20ml

Item has been added to the configuration

Objective N-Achroplan 40x/0.65 Ph2 M27

Recover

Item no.: 420961-9911-000

Objective N-Achroplan 40x/0.65 Ph2 M27

Item Number: 420961-9911-000

Objective N-Achroplan 40x/0.65 Ph2 M27 (FWD=0.60mm)

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 Ph2 M27

Recover

Item no.: 420951-9911-000

Objective N-Achroplan 20x/0.45 Ph2 M27

Item Number: 420951-9911-000

Objective N-Achroplan 20x/0.45 Ph2 M27 (FWD=0.65mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 Ph1 M27

Recover

Item no.: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27

Item Number: 420941-9911-000

Objective N-Achroplan 10x/0.25 Ph1 M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 Ph1 M27

Recover

Item no.: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27

Item Number: 420931-9911-000

Objective N-Achroplan 5x/0.15 Ph1 M27 (FWD=12.0mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.13 Ph0 M27

Recover

Item no.: 420931-9910-000

Objective N-Achroplan 5x/0.13 Ph0 M27

Item Number: 420931-9910-000

Objective N-Achroplan 5x/0.13 Ph0 M27 (WD=5,5mm)

Achroplan Polarization Contrast

Item has been added to the configuration

Objective N-Achroplan 50x/0.8 Pol M27

Recover

Item no.: 420973-9900-000

Objective N-Achroplan 50x/0.8 Pol M27

Item Number: 420973-9900-000

Objective N-Achroplan 50x/0.8 Pol M27 (FWD=0.41mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective N-Achroplan 20x/0.45 Pol M27

Recover

Item no.: 420953-9901-000

Objective N-Achroplan 20x/0.45 Pol M27

Item Number: 420953-9901-000

Objective N-Achroplan 20x/0.45 Pol M27 (FWD=0.63mm)

Item has been added to the configuration

Objective N-Achroplan 10x/0.25 Pol M27

Recover

Item no.: 420943-9901-000

Objective N-Achroplan 10x/0.25 Pol M27

Item Number: 420943-9901-000

Objective N-Achroplan 10x/0.25 Pol M27 (FWD=6.5mm)

Item has been added to the configuration

Objective N-Achroplan 5x/0.15 Pol M27

Recover

Item no.: 420933-9901-000

Objective N-Achroplan 5x/0.15 Pol M27

Item Number: 420933-9901-000

Objective N-Achroplan 5x/0.15 Pol M27 (FWD=12.0mm)

Objectives Live Cell Imaging

Item has been added to the configuration

Objective i LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27

Recover

Item no.: 420882-9971-720

Objective i LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27

Item Number: 420882-9971-720

Objective i LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27 with insulation ring for optimized temperature at the specimen, for water, silicone oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.17mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27

Recover

Item no.: 420882-9971-000

Objective LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27

Item Number: 420882-9971-000

Objective LCI Plan-Neofluar 63x/1.3 Imm Corr DIC M27 for water, silicone oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.17mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 63x/1.2 Imm autocorr DIC M27

Recover

Item no.: 420882-9870-790

Objective LD LCI Plan-Apochromat 63x/1.2 Imm autocorr DIC M27

Item Number: 420882-9870-790

Objective LD LCI Plan-Apochromat 63x/1.2 Imm autocorr DIC M27 for immersion media with refractive index 1.43 or higher to glycerine or oil immersion. (UV) VIS-IR (D=0.15-0.19mm) (WD=0.49mm at D=0.17mm) ACR functionality included. Incl. Immersol 518 F for 30 °C, oiler 20ml and Cover glasses, high performance, D=0.17mm, box with 100 pc. With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 63x/1.2 Imm Corr DIC M27

Recover

Item no.: 420882-9870-000

Objective LD LCI Plan-Apochromat 63x/1.2 Imm Corr DIC M27

Item Number: 420882-9870-000

Objective LD LCI Plan-Apochromat 63x/1.2 Imm Corr DIC M27 for immersion media with refractive index 1.43 or higher to glycerine or oil immersion. (UV) VIS-IR (CG=0.15-0.19mm) (FWD=0.49mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 40x/1.2 Imm autocorr DIC M27

Recover

Item no.: 420862-9970-790

Objective LD LCI Plan-Apochromat 40x/1.2 Imm autocorr DIC M27

Item Number: 420862-9970-790

Objective LD LCI Plan-Apochromat 40x/1.2 Imm autocorr DIC M27 for water, silicon oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.40mm at CG=0.17mm) ACR functionality included. Incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 40x/1.2 Imm Corr DIC M27

Recover

Item no.: 420862-9970-000

Objective LD LCI Plan-Apochromat 40x/1.2 Imm Corr DIC M27

Item Number: 420862-9970-000

Objective LD LCI Plan-Apochromat 40x/1.2 Imm Corr DIC M27 for water, silicon oil or glycerine immersion (CG=0.15-0.19mm) (FWD=0.41mm at CG=0.17mm) incl. Immersol G, bottle 20 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc

Item has been added to the configuration

Objective i LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27

Recover

Item no.: 420852-9973-720

Objective i LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27

Item Number: 420852-9973-720

Objective i LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27 with insulation ring for optimized temperature at the specimen, for water, silicone oil, glycerine or oil immersion (CG=0-0.17mm) (FWD=0.21mm at CG=0.17mm) incl. Immersol G, bottle 20 ml

Item has been added to the configuration

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27

Recover

Item no.: 420852-9973-000

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27

Item Number: 420852-9973-000

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr DIC M27 for water, silicone oil, glycerine or oil immersion (CG=0-0.17mm) (FWD=0.21mm at CG=0.17mm) incl. Immersol G, bottle 20 ml

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27

Recover

Item no.: 420852-9872-000

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27

Item Number: 420852-9872-000

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27 for water, silicone oil, glycerine, or oil immersion (CG=0-0.17mm) (FWD=0.57mm at CG=0.17mm) incl. Immersol 518 F for 37°C, oiler 20 ml

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27

Recover

Item no.: 420852-9871-790

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27

Item Number: 420852-9871-790

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27 for water, silicone oil, glycerine, or oil immersion (UV) VIS-IR (CG=0-0.17mm) (FWD=0.57mm at CG=0.17mm) ACR functionality included. Incl. Immersol 518 F for 37°C, oiler 20 ml With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27

Recover

Item no.: 420852-9871-000

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27

Item Number: 420852-9871-000

Objective LD LCI Plan-Apochromat 25x/0.8 Imm Corr DIC M27 for water, silicone oil, glycerine or oil immersion (CG=0-0.17mm) (FWD=0.57mm at CG=0.17mm) incl. Immersol 518 F, oiler 20 ml

Item has been added to the configuration

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27

Recover

Item no.: 420852-9870-790

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27

Item Number: 420852-9870-790

Objective LD LCI Plan-Apochromat 25x/0.8 Imm autocorr DIC M27 for water, silicone oil, glycerine or oil immersion (UV) VIS-IR (CG=0-0.17mm) (FWD=0.57mm at CG=0.17mm) ACR functionality included. Incl. Immersol G, oiler 20 ml With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr Ph2 M27

Recover

Item no.: 420851-9972-000

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr Ph2 M27

Item Number: 420851-9972-000

Objective LCI Plan-Neofluar 25x/0.8 Imm Corr Ph2 M27 for water, silicone oil, glycerine or oil immersion (D=0-0.17mm) (WD=0.21mm at D=0.17mm) incl. Immersol W, bottle 20 ml

Plan-Apochromat DIC

Item has been added to the configuration

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27

Recover

Item no.: 420792-9970-000

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27

Item Number: 420792-9970-000

Objective Plan-Apochromat 150x/1.35 Glyc DIC Corr M27 (CG=0.14-0.18mm at 23 °C and CG=0.15-0.19 at 37 °C) (FWD=0.17mm at CG=0.16mm), VIS-IR incl. Immersol G, bottle 10 ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil DIC M27

Recover

Item no.: 420792-9901-000

Objective Plan-Apochromat 100x/1.4 Oil DIC M27

Item Number: 420792-9901-000

Objective Plan-Apochromat 100x/1.4 Oil DIC M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective alpha Plan-Apochromat 100x/1.46 Oil DIC M27

Recover

Item no.: 420792-9800-000

Objective alpha Plan-Apochromat 100x/1.46 Oil DIC M27

Item Number: 420792-9800-000

Objective alpha Plan-Apochromat 100x/1.46 Oil DIC M27 (FWD=0.10mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective alpha Plan-Apochromat 100x/1.57 Oil-HI DIC Corr M27

Recover

Item no.: 420792-9771-000

Objective alpha Plan-Apochromat 100x/1.57 Oil-HI DIC Corr M27

Item Number: 420792-9771-000

Objective alpha Plan-Apochromat 100x/1.57 Oil-HI DIC Corr M27 (CG=0.165-0.175mm) (FWD=0.12mm at CG=0.170mm) displaceable segment diaphragm included, incl. Immersol HI ne=1.66 (23°C), oiler 20 ml and 15 pc. HI cover glasses 0.17 mm +/-0.003 With serial number. Strehl ratio >90%.

Item has been added to the configuration

Objective i Plan-Apochromat 63x/1.4 Oil DIC M27

Recover

Item no.: 420782-9900-720

Objective i Plan-Apochromat 63x/1.4 Oil DIC M27

Item Number: 420782-9900-720

Objective i Plan-Apochromat 63x/1.4 Oil DIC M27 with insulation ring for optimum temperature stability at the specimen, (FWD=0.18mm) incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63x/1.4 Oil DIC M27

Recover

Item no.: 420782-9900-000

Objective Plan-Apochromat 63x/1.4 Oil DIC M27

Item Number: 420782-9900-000

Objective Plan-Apochromat 63x/1.4 Oil DIC M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/1.3 Oil DIC M27

Recover

Item no.: 420762-9800-000

Objective Plan-Apochromat 40x/1.3 Oil DIC M27

Item Number: 420762-9800-000

Objective Plan-Apochromat 40x/1.3 Oil DIC M27 (FWD=0.21mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/1.4 Oil DIC M27

Recover

Item no.: 420762-9700-000

Objective Plan-Apochromat 40x/1.4 Oil DIC M27

Item Number: 420762-9700-000

Objective Plan-Apochromat 40x/1.4 Oil DIC M27 (FWD=0.13mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20 ml and cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Plan-Apochromat Phase Contrast

Item has been added to the configuration

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27

Recover

Item no.: 420791-9911-000

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27

Item Number: 420791-9911-000

Objective Plan-Apochromat 100x/1.4 Oil Ph3 M27 (FWD=0.17mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27

Recover

Item no.: 420781-9910-000

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27

Item Number: 420781-9910-000

Objective Plan-Apochromat 63/1.4 Oil Ph3 M27 (FWD=0.19mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27

Recover

Item no.: 420761-9810-000

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27

Item Number: 420761-9810-000

Objective Plan-Apochomat 40x/1.3 Oil Ph3 M27 (FWD=0.2mm), (UV)VIS-IR, incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27

Recover

Item no.: 420661-9970-000

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27

Item Number: 420661-9970-000

Objective Plan-Apochromat 40x/0.95 Corr Ph3 M27 (FWD=0.25mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective Plan-Apochromat 20x/0.8 Ph2 M27

Recover

Item no.: 420651-9912-000

Objective Plan-Apochromat 20x/0.8 Ph2 M27

Item Number: 420651-9912-000

Objective Plan-Apochromat 20x/0.8 Ph2 M27 (FWD=0.55mm), incl. cover glasses, high performance, CG=0.17mm, box with 100 pc. Lead-free

Item has been added to the configuration

Objective Plan-Apochromat 10x/0.45 Ph1 M27

Recover

Item no.: 420641-9910-000

Objective Plan-Apochromat 10x/0.45 Ph1 M27

Item Number: 420641-9910-000

Objective Plan-Apochromat 10x/0.45 Ph1 M27 (FWD=2.1mm)

Plan-Neofluar Polarization Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Recover

Item no.: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27

Item Number: 420493-9900-000

Objective EC Plan-Neofluar 100x/1.30 Oil Pol M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.9 Pol M27

Recover

Item no.: 420363-9901-000

Objective EC Plan-Neofluar 40x/0.9 Pol M27

Item Number: 420363-9901-000

Objective EC Plan-Neofluar 40x/0.9 Pol M27 (FWD=0.41mm), incl. Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 Pol M27

Recover

Item no.: 420353-9900-000

Objective EC Plan-Neofluar 20x/0.50 Pol M27

Item Number: 420353-9900-000

Objective EC Plan-Neofluar 20x/0.50 Pol M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Recover

Item no.: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27

Item Number: 420343-9901-000

Objective EC Plan-Neofluar 10x/0.3 Pol M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 Pol M27

Recover

Item no.: 420333-9901-000

Objective EC Plan-Neofluar 5x/0.16 Pol M27

Item Number: 420333-9901-000

Objective EC Plan-Neofluar 5x/0.16 Pol M27 (FWD=18.5mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27

Recover

Item no.: 420323-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27

Item Number: 420323-9902-000

Objective EC Plan-Neofluar 2.5x/0.085 Pol M27 (FWD=8.8mm)

Plan-Neofluar Phase Contrast

Item has been added to the configuration

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Recover

Item no.: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27

Item Number: 420491-9910-000

Objective EC Plan-Neofluar 100x/1.30 Oil Ph3 M27 (FWD=0.20mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27

Recover

Item no.: 420481-9911-000

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27

Item Number: 420481-9911-000

Objective EC Plan-Neofluar 63x/1.25 Oil Ph3 M27 (FWD=0.10mm), incl. Immersol 518 F, oiler 20ml

Item has been added to the configuration

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27

Recover

Item no.: 420461-9910-000

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27

Item Number: 420461-9910-000

Objective EC Plan-Neofluar 40/1.30 Oil Ph3 M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Recover

Item no.: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27

Item Number: 420361-9910-000

Objective EC Plan-Neofluar 40x/0.75 Ph2 M27 (FWD=0.71mm), incl. Cover glasses, high performance, CG=0.17 mm, box with 100 pc.

Item has been added to the configuration

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Recover

Item no.: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27

Item Number: 420351-9910-000

Objective EC Plan-Neofluar 20x/0.50 Ph2 M27 (FWD=2.0mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Recover

Item no.: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27

Item Number: 420341-9911-000

Objective EC Plan-Neofluar 10x/0.3 Ph1 M27 (FWD=5.2mm)

Item has been added to the configuration

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Recover

Item no.: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27

Item Number: 420331-9911-000

Objective EC Plan-Neofluar 5x/0.16 Ph1 M27 (FWD=18.5mm)

Plan-Neofluar DIC

Item has been added to the configuration

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Recover

Item no.: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27

Item Number: 420462-9900-000

Objective EC Plan-Neofluar 40x/1.30 Oil DIC M27 (FWD=0.21mm), incl. Immersol 518 F, oiler 20ml and Cover glasses, high performance, CG=0.17mm, box with 100 pc.

Reflected-light objectives (41)

Epiplan-Apochromat BrightField/DarkField DIC

Item has been added to the configuration

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Recover

Item no.: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27

Item Number: 422692-9961-000

Objective EC Epiplan-Apochromat 100x/0.95 HD DIC M27 (FWD=0.21mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Recover

Item no.: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27

Item Number: 422672-9960-000

Objective EC Epiplan-Apochromat 50x/0.95 BD DIC M27 (FWD=0.28mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Recover

Item no.: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27

Item Number: 422652-9960-000

Objective EC Epiplan-Apochromat 20x/0.6 BD DIC M27 (FWD=1.7mm)

Item has been added to the configuration

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Recover

Item no.: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27

Item Number: 422642-9960-000

Objective EC Epiplan-Apochromat 10x/0.3 BD DIC M27 (FWD=5.0mm)

Epiplan-Apochromat BrightField

Item has been added to the configuration

Objective EC Epiplan-Apochromat 150x/0.95 M27

Recover

Item no.: 422690-9900-000

Objective EC Epiplan-Apochromat 150x/0.95 M27

Item Number: 422690-9900-000

Objective EC Epiplan-Apochromat 150x/0.95 M27 (FWD=0.23mm)

Epiplan-Neofluar LD BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Recover

Item no.: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27

Item Number: 422492-9960-000

Objective LD EC Epiplan-Neofluar 100x/0.75 BD DIC M27 (FWD=4.1mm)

Epiplan-Neofluar LD DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Recover

Item no.: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27

Item Number: 422492-9900-000

Objective LD EC Epiplan-Neofluar 100x/0.75 DIC M27 (FWD=4.0mm)

Epiplan-Neofluar BrightField/DarkField DIC

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Recover

Item no.: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27

Item Number: 422472-9960-000

Objective LD EC Epiplan-Neofluar 50x/0.55 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Recover

Item no.: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27

Item Number: 422452-9960-000

Objective LD EC Epiplan-Neofluar 20x/0.22 BD DIC M27 (FWD=12.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Recover

Item no.: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27

Item Number: 422392-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Recover

Item no.: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27

Item Number: 422372-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD DIC M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Recover

Item no.: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27

Item Number: 422342-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD DIC M27 (FWD=9.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Recover

Item no.: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27

Item Number: 000000-1156-524

Objective EC Epiplan-Neofluar 20x/0.50 BD DIC M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Recover

Item no.: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27

Item Number: 000000-1156-514

Objective EC Epiplan-Neofluar 5x/0.13 BD DIC M27 (FWD=14.5mm)

Epiplan-Neofluar DIC

Item has been added to the configuration

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Recover

Item no.: 422472-9900-000

Objective LD EC "Epiplan-Neofluar" 50x/0,55 DIC

Item Number: 422472-9900-000

Objective LD EC Epiplan-Neofluar 50x/0.55 DIC M27 (FWD=9.1mm)

Item has been added to the configuration

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Recover

Item no.: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27

Item Number: 422452-9900-000

Objective LD EC Epiplan-Neofluar 20x/0.22 DIC M27 (FWD=12.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Recover

Item no.: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27

Item Number: 422392-9901-000

Objective EC Epiplan-Neofluar 100x/0.9 DIC M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Recover

Item no.: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27

Item Number: 422372-9901-000

Objective EC Epiplan-Neofluar 50x/0.8 DIC M27 (FWD=0.57mm)

Item has been added to the configuration

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Recover

Item no.: 422342-9900-000

Objective EC Epiplan-NEOFLUAR 10x/0,25 DIC

Item Number: 422342-9900-000

Objective EC Epiplan-Neofluar 10x/0.25 DIC M27 (FWD=9.3mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Recover

Item no.: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27

Item Number: 000000-1156-521

Objective EC Epiplan-Neofluar 20x/0.50 DIC M27 (FWD=2.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Recover

Item no.: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27

Item Number: 000000-1156-511

Objective EC Epiplan-Neofluar 5x/0.13 DIC M27 (FWD=15.8mm)

Epiplan-Neofluar BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Recover

Item no.: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27

Item Number: 422390-9961-000

Objective EC Epiplan-Neofluar 100x/0.9 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Recover

Item no.: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27

Item Number: 422370-9961-000

Objective EC Epiplan-Neofluar 50x/0.8 BD M27 (FWD=0.59mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Recover

Item no.: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27

Item Number: 422350-9960-000

Objective EC Epiplan-Neofluar 20x/0.50 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Recover

Item no.: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27

Item Number: 422340-9960-000

Objective EC Epiplan-Neofluar 10x/0.25 BD M27 (FWD=9mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Recover

Item no.: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27

Item Number: 422330-9960-000

Objective EC Epiplan-Neofluar 5x/0.13 BD M27 (FWD=14.5mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Recover

Item no.: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27

Item Number: 422320-9960-000

Objective EC Epiplan-Neofluar 2.5x/0.06 BD M27 (FWD=15.1mm)

Epiplan-Neofluar BrightField

Item has been added to the configuration

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Recover

Item no.: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27

Item Number: 422320-9900-000

Objective EC Epiplan-Neofluar 2.5x/0.06 M27 (FWD=15.1mm)

Item has been added to the configuration

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Recover

Item no.: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27

Item Number: 422310-9901-000

Objective EC Epiplan-Neofluar 1.25x/0.03 M27 (FWD=4.0mm)

Epiplan BrightField/DarkField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 BD M27

Recover

Item no.: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27

Item Number: 422090-9961-000

Objective EC Epiplan 100x/0.85 BD M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 BD M27

Recover

Item no.: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27

Item Number: 422070-9961-000

Objective EC Epiplan 50x/0.75 BD M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 BD M27

Recover

Item no.: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27

Item Number: 422060-9961-000

Objective EC Epiplan 40x/0.6 BD M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 BD M27

Recover

Item no.: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27

Item Number: 422050-9961-000

Objective EC Epiplan 20x/0.4 BD M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 BD M27

Recover

Item no.: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27

Item Number: 422040-9961-000

Objective EC Epiplan 10x/0.25 BD M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 BD M27

Recover

Item no.: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27

Item Number: 422030-9961-000

Objective EC Epiplan 5x/0.13 BD M27 (FWD=11.8mm)

Epiplan BrightField

Item has been added to the configuration

Objective EC Epiplan 100x/0.85 M27

Recover

Item no.: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27

Item Number: 422090-9902-000

Objective EC Epiplan 100x/0.85 M27 (FWD=0.87mm)

Item has been added to the configuration

Objective EC Epiplan 50x/0.75 M27

Recover

Item no.: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27

Item Number: 422070-9902-000

Objective EC Epiplan 50x/0.75 M27 (FWD=1.0mm)

Item has been added to the configuration

Objective EC Epiplan 40x/0.6 M27

Recover

Item no.: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27

Item Number: 422060-9901-000

Objective EC Epiplan 40x/0.6 M27 (FWD=2.2mm)

Item has been added to the configuration

Objective EC Epiplan 20x/0.4 M27

Recover

Item no.: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27

Item Number: 422050-9903-000

Objective EC Epiplan 20x/0.4 M27 (FWD=3.2mm)

Item has been added to the configuration

Objective EC Epiplan 10x/0.25 M27

Recover

Item no.: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27

Item Number: 422040-9902-000

Objective EC Epiplan 10x/0.25 M27 (FWD=11.0mm)

Item has been added to the configuration

Objective EC Epiplan 5x/0.13 M27

Recover

Item no.: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27

Item Number: 422030-9902-000

Objective EC Epiplan 5x/0.13 M27 (FWD=11.8mm)

Immersion oils (12)

Glycerin immersion

Item has been added to the configuration

Immersion medium Immersol G, oiler 20 ml

Recover

Item no.: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml

Item Number: 462959-9901-000

Immersion medium Immersol G, oiler 20 ml ne = 1.456 (23 °C) ve = 58 Glycerine immersion for fluorescence microscopy

Other immersion oils

Item has been added to the configuration

Immersion medium Immersol Sil 406, Oiler 20 ml

Recover

Item no.: 444971-9000-000

Immersion medium Immersol Sil 406, Oiler 20 ml

Item Number: 444971-9000-000

Immersion medium Immersol Sil 406, Oiler 20 ml Brown glass bottle 20 ml, ne=1.406 (23 °C), halogen free

Item has been added to the configuration

Immersion Oil Immersol HI 661 (23°C), oiler 20 ml

Recover

Item no.: 444967-9001-000

Immersion Oil Immersol HI 661 (23°C), oiler 20 ml

Item Number: 444967-9001-000

Immersion Oil Immersol HI 661 (23°C), oiler 20 ml ne=1.661 (23°C), Brown glass bottle 20 ml For objective alpha Plan-Apochromat 100x/1.57 Oil-HI Corr DIC M27 together with cover glasses HI, CG=0.17m, round dia=25mm

Item has been added to the configuration

Immersion oil Immersol M, bottle 100 ml

Recover

Item no.: 444966-0000-000

Immersion oil Immersol M, bottle 100 ml

Item Number: 444966-0000-000

Immersion oil Immersol M, bottle 100 ml (ISO 8036, DIN 58 884, ne=1.518 (23°C))

Item has been added to the configuration

Immersion oil Immersol M, oiler 20 ml

Recover

Item no.: 444965-0000-000

Immersion oil Immersol M, oiler 20 ml

Item Number: 444965-0000-000

Immersion oil Immersol M, oiler 20 ml (ISO 8036, DIN 58 884, ne=1.518 (23°C))

Immersion oil F

Item has been added to the configuration

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml

Recover

Item no.: 444970-9010-000

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml

Item Number: 444970-9010-000

Immersion oil Immersol 518 F for 37°C fluorescence free, oiler 20ml (ISO 8036-1/2, ne=1.518 (37°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml

Recover

Item no.: 444970-9000-000

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml

Item Number: 444970-9000-000

Immersion oil Immersol 518 F for 30°C fluorescence free, oiler 20ml (ISO 8036-1/2, ne=1.518 (30°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Recover

Item no.: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml

Item Number: 444962-0000-000

Immersion oil Immersol 518 F fluorescence free, bottle 100 ml (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml

Recover

Item no.: 444960-0000-000

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml

Item Number: 444960-0000-000

Immersion oil Immersol 518 F fluorescence free, oiler 20 ml (ISO 8036-1/2, ne=1.518 (23°C), halogen-free)

Immersion oil W

Item has been added to the configuration

Immersion medium Immersol W 2010, oiler 20 ml

Recover

Item no.: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml

Item Number: 444969-0000-000

Immersion medium Immersol W 2010, oiler 20 ml ne=1.3339 (23°C) for water immersion

Immersion oil N

Item has been added to the configuration

Immersion oil Immersol 518 N, bottle 100 ml

Recover

Item no.: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml

Item Number: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 N, oiler 20 ml

Recover

Item no.: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml

Item Number: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Accessories for objectives (17)

Cover slips

Item has been added to the configuration

Cover glasses high performance, D=0.17mm, 22x22mm, box with 200 pc.

Recover

Item no.: 474030-9020-000

Cover glasses high performance, D=0.17mm, 22x22mm, box with 200 pc.

Item Number: 474030-9020-000

Cover glasses high performance, D=0.17mm, 22x22mm, box with 200 pc. Size 22x22 mm² type 1 1/2 H as per ISO 8255-1 with restricted thickness-related tolerance D=0.17 mm +/- 0.005 mm refractive index = 1.5255 +/- 0.00015, Abbe number = 56 +/-2 recommended for applications with high numerical aperture objectives

Item has been added to the configuration

Cover glasses, high performance, D=0.17mm, box with 1000 pc.

Recover

Item no.: 474030-9000-000

Cover glasses, high performance, D=0.17mm, box with 1000 pc.

Item Number: 474030-9000-000

Cover glasses, high performance, D=0.17mm, box with 1000 pc. Size 18x18 mm² type 1 1/2 H as per ISO 8255-1 with restricted thickness-related tolerance D=0.17 mm +/- 0.005 mm refractive index = 1.5255 +/- 0.0015, Abbe number = 56 +/-2 recommended for applications with high numerical aperture objectives

Item has been added to the configuration

Cover glasses with fiducials 20 pc. (YB)

Recover

Item no.: 432335-9370-000

Cover glasses with fiducials 20 pc. (YB)

Item Number: 432335-9370-000

Cover glasses with fiducials 20 pc. (YB) Special designed cover glasses with reference markers for correlative microscopy including a 6-digit serial number on each cover glass for a clear assignment of the sample carrier. - Cover glasses coated with indium tin oxide (ITO) - substrate: glass (D263M) - format: 22 +/- 0.1 mm x 22 +/- 0.1 mm x 0.170 +/-0.005 mm - Chromium reference markers covered with ITO - Chrom thickness: 50 +/- 10 nm - size tolerance of the small L marker: +/- 0.003 mm - precision of the distance between chromium structure and edge of the cover glass: +/- 0.1 mm - ITO Rsq = 170 +/- 30 Ohm/sq - ITO Tavg >= 87% for 450-780 nm - Cover glasses compatible with ZEISS specimen holder CorrMic LS for cover glasses 22 x 22 mm Packaging unit: 20 pcs

Item has been added to the configuration

Cover glasses HI, D=0.17m, round dia=25mm, box with 15 pc. (D)

Recover

Item no.: 000000-1787-996

Cover glasses HI, D=0.17m, round dia=25mm, box with 15 pc. (D)

Item Number: 000000-1787-996

Cover glasses HI, CG=0.17m, round dia=25mm, box with 15 pc. (D) D=0.17 mm +/- 0.003 mm for objective alpha Plan-Apochromat 100x/1.57 Oil DIC Corr

Cleaning paper

Item has been added to the configuration

Box of lens cleaning paper (300 sheets)

Recover

Item no.: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Item Number: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Intermediate rings

Item has been added to the configuration

Objective ring ACR for objective sleeve cylindrical long

Recover

Item no.: 424511-0000-000

Objective ring ACR for objective sleeve cylindrical long

Item Number: 424511-0000-000

Objective ring ACR for objective sleeve cylindrical long

Item has been added to the configuration

Objective ring ACR for objective sleeve conical long

Recover

Item no.: 424510-0000-000

Objective ring ACR for objective sleeve conical long

Item Number: 424510-0000-000

Objective ring ACR for objective sleeve conical long

Item has been added to the configuration

Objective ring ACR for objective sleeve conical short

Recover

Item no.: 424509-0000-000

Objective ring ACR for objective sleeve conical short

Item Number: 424509-0000-000

Objective ring ACR for objective sleeve conical short

Item has been added to the configuration

Objective ring ACR for objective sleeve cylindrical short

Recover

Item no.: 424508-0000-000

Objective ring ACR for objective sleeve cylindrical short

Item Number: 424508-0000-000

Objective ring ACR for objective sleeve cylindrical short

Item has been added to the configuration

Objective extension ring H= 12.3 mm, M27

Recover

Item no.: 000000-1374-410

Objective extension ring H= 12.3 mm, M27

Item Number: 000000-1374-410

Objective extension ring H= 12.3 mm, M27 for the height compensation when PIFOC is used

Item has been added to the configuration

Objective extension ring DIC H= 12.3 mm, M27

Recover

Item no.: 000000-1374-408

Objective extension ring DIC H= 12.3 mm, M27

Item Number: 000000-1374-408

Objective extension ring DIC H= 12.3 mm, M27 for the height compensation when PIFOC is used, with DIC slot

Item has been added to the configuration

Adapter M 27x0.75 / W 0.8 H "0"

Recover

Item no.: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Item Number: 000000-1095-168

Adapter M 27x0.75 / W 0.8 H "0"

Cover slip caps

Item has been added to the configuration

Coverglass cap for D=0.17mm

Recover

Item no.: 422904-9001-000

Coverglass cap for D=0.17mm

Item Number: 422904-9001-000

Coverglass cap for D=0.17mm for objectives LD A-Plan 10x/0.25, 20x/0.35, 32x/0.45, 40x/0.55 and 63x/0.65, if samples with cover glass 0.17 mm shall be observed

Antiflex caps

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Recover

Item no.: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item Number: 422901-9900-000

Antiflex cap for EC Epiplan-Neofluar 2.5x/0.06

Item has been added to the configuration

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Recover

Item no.: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Item Number: 422900-9900-000

Antiflex cap for EC Epiplan-Neofluar 1.25x/0.03

Microscope slides, various accessories

Item has been added to the configuration

Installation Kit autocorr for Axio Observer

Recover

Item no.: 420852-9020-000

Installation Kit autocorr for Axio Observer

Item Number: 420852-9020-000

Installation Kit autocorr for Axio Observer consisting of parts for safe cable guide for the use of objectives autocorr with Axio Observer

Item has been added to the configuration

CAN Distributor for Motorized Objectives and Filter Wheels

Recover

Item no.: 420852-9000-000

CAN Distributor for Motorized Objectives and Filter Wheels

Item Number: 420852-9000-000

CAN Distributor for Motorized Objectives and Filter Wheels for up to 3 objectives autocorr and 1-2 filter wheels

Condensers (26)

Stop slider

Item has been added to the configuration

3 position contrast slider 10x29mm for PlasDIC module and analyzer

Recover

Item no.: 426980-9100-000

3 position contrast slider 10x29mm for PlasDIC module and analyzer

Item Number: 426980-9100-000

3 position contrast slider 10x29mm for PlasDIC module and analyzer - for Axio Observer 3 / 5 - switching positions: DIC/Pol, H/Ph/FL, PlasDIC - slider operatable from both sides

Condenser, LD

Item has been added to the configuration

Condensor 0.55 motorized for Lattice SIM and ELYRA 7

Recover

Item no.: 424244-9200-000

Condensor 0.55 motorized for Lattice SIM and ELYRA 7

Item Number: 424244-9200-000

Condensor 0.55 motorized for Lattice SIM and ELYRA 7

Item has been added to the configuration

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions, mot.

Recover

Item no.: 424244-0000-000

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions, mot.

Item Number: 424244-0000-000

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions, mot. with motorized aperture diaphragm and turret disk, WD=26mm For objective magnifications 4.0x-100x

Item has been added to the configuration

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions

Recover

Item no.: 424242-0000-000

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions

Item Number: 424242-0000-000

LD condenser 0.55 H, Ph1, Ph2, Ph3, DIC, DIC; 6 positions with aperture diaphragm, WD=26mm For objective magnifications 4.0x-100x

Item has been added to the configuration

LD condenser 0.35 H Ph PlasDIC DIC iHMC

Recover

Item no.: 424241-9010-000

LD condenser 0.35 H Ph PlasDIC DIC iHMC

Item Number: 424241-9010-000

LD condenser 0.35 H Ph PlasDIC DIC iHMC - 5-position modulator disk, freely configurable - centerable positions, position 1 with aperture stop - for objectives 2.5x - 100x - 70 mm working distance

Item has been added to the configuration

LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions

Recover

Item no.: 424241-0000-000

LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions

Item Number: 424241-0000-000

LD condenser 0.35 H, Ph0, Ph1, Ph2, DIC, DIC; 6 positions with aperture diaphragm, WD=70mm For objective magnifications 2.5x-100x

DIC prism type I

Item has been added to the configuration

Condenser module DIC I/0.55 with polarizer

Recover

Item no.: 426722-0000-000

Condenser module DIC I/0.55 with polarizer

Item Number: 426722-0000-000

Condenser module DIC I/0.55 with polarizer

Item has been added to the configuration

DIC prism I/0.35

Recover

Item no.: 000000-1005-821

DIC prism I/0.35

Item Number: 000000-1005-821

DIC prism I/0.35

DIC prisms type III

Item has been added to the configuration

Condenser module DIC III/0.55 with polarizer

Recover

Item no.: 426721-0000-000

Condenser module DIC III/0.55 with polarizer

Item Number: 426721-0000-000

Condenser module DIC III/0.55 with polarizer

DIC prisms type II

Item has been added to the configuration

Condenser module DIC II/0.55 with polarizer

Recover

Item no.: 426720-0000-000

Condenser module DIC II/0.55 with polarizer

Item Number: 426720-0000-000

Condenser module DIC II/0.55 with polarizer

Item has been added to the configuration

DIC prism II/0.35

Recover

Item no.: 000000-1005-822

DIC prism II/0.35

Item Number: 000000-1005-822

DIC prism II/0.35

Condenser module/prisms II

Item has been added to the configuration

Condenser module DIC II/0.35 with polarizer

Recover

Item no.: 426717-9290-000

Condenser module DIC II/0.35 with polarizer

Item Number: 426717-9290-000

Condenser module DIC II/0.35 with polarizer usable with LD condenser 0.35 H Ph PlasDIC DIC iHMC on the Axio Observer

Condenser modules/prisms I

Item has been added to the configuration

Condenser module DIC I/0.35 with polarizer

Recover

Item no.: 426717-9280-000

Condenser module DIC I/0.35 with polarizer

Item Number: 426717-9280-000

Condenser module DIC I/0.35 with polarizer usable for LD condenser 0.35 H Ph PlasDIC DIC iHMC on the Axio Observer

Stops, PH, D, Varel

Item has been added to the configuration

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Recover

Item no.: 426717-9220-000

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Item Number: 426717-9220-000

iHMC module 3 0.35/0.4 for condenser (40x/63x iHMC)

Item has been added to the configuration

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Recover

Item no.: 426717-9210-000

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Item Number: 426717-9210-000

iHMC module 2 0.35/0.4 for condenser (20x iHMC)

Item has been added to the configuration

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Recover

Item no.: 426717-9200-000

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Item Number: 426717-9200-000

iHMC module 1 0.35/0.4 for condenser (10x iHMC)

Item has been added to the configuration

Phase stop Ph 2 0.35/0.4 for condenser

Recover

Item no.: 426717-9160-000

Phase stop Ph 2 0.35/0.4 for condenser

Item Number: 426717-9160-000

Phase stop Ph 2 0.35/0.4 for condenser

Item has been added to the configuration

Phase stop Ph 1 0.35/0.4 for condenser

Recover

Item no.: 426717-9150-000

Phase stop Ph 1 0.35/0.4 for condenser

Item Number: 426717-9150-000

Phase stop Ph 1 0.35/0.4 for condenser

DIC prisms type III

Item has been added to the configuration

Condenser module DIC III/1.4 with polarizer

Recover

Item no.: 426709-0000-000

Condenser module DIC III/1.4 with polarizer

Item Number: 426709-0000-000

Condenser module DIC III/1.4 with polarizer

DIC prisms type II

Item has been added to the configuration

Condenser module DIC II/1.4 with polarizer

Recover

Item no.: 426708-0000-000

Condenser module DIC II/1.4 with polarizer

Item Number: 426708-0000-000

Condenser module DIC II/1.4 with polarizer

Item has been added to the configuration

Condenser module DIC II/0.8 with polarizer

Recover

Item no.: 426706-0000-000

Condenser module DIC II/0.8 with polarizer

Item Number: 426706-0000-000

Condenser module DIC II/0.8 with polarizer

DIC prisms type I

Item has been added to the configuration

Condenser module DIC I/0.8 with polarizer

Recover

Item no.: 426705-0000-000

Condenser module DIC I/0.8 with polarizer

Item Number: 426705-0000-000

Condenser module DIC I/0.8 with polarizer

DIC prisms type 0

Item has been added to the configuration

Condenser module DIC 0/0.8 with polarizer

Recover

Item no.: 426704-0000-000

Condenser module DIC 0/0.8 with polarizer

Item Number: 426704-0000-000

Condenser module DIC 0/0.8 with polarizer

Various accessories

Item has been added to the configuration

Condenser mount for Axio Imager condensers 0.8/1.4

Recover

Item no.: 424245-0000-000

Condenser mount for Axio Imager condensers 0.8/1.4

Item Number: 424245-0000-000

Condenser mount for Axio Imager condensers 0.8/1.4

Condenser, H, PH, D, DIC

Item has been added to the configuration

Achromatic-aplanatic condenser 1.4 H D Ph DIC

Recover

Item no.: 424208-0000-000

Achromatic-aplanatic condenser 1.4 H D Ph DIC

Item Number: 424208-0000-000

Achromatic-aplanatic condenser 1.4 H D Ph DIC with fixed front lens, turret disk, with centerable Ph2, Ph3 and D stops, already integrated, 2 mounts for DIC condenser modules, 1 separate position for bright field. For objective magnifications 20x- 100x, WD=0.4mm

Condenser, H

Item has been added to the configuration

Condenser, LD achromatic 0.8 H DIC

Recover

Item no.: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC

Item Number: 424206-9901-000

Condenser, LD achromatic 0.8 H DIC with fixed front lens, 1 mount for DIC condenser module. For objectives 5x-100x, WD=8.6 mm

Connecting cables (2)

Illuminator cables

Item has been added to the configuration

Extension cable 6 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item Number: 457411-9070-000

Extension cable 6 m for illuminators HAL 100/LED

Item has been added to the configuration

Extension cable 2 m for illuminators HAL 100/LED

Recover

Item no.: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Item Number: 457411-9051-000

Extension cable 2 m for illuminators HAL 100/LED

Control devices (11)

Cables, control unit

Item has been added to the configuration

CAN-bus cable 2.5 m

Recover

Item no.: 457411-9011-000

CAN-bus cable 2.5 m

Item Number: 457411-9011-000

CAN-bus cable 2.5 m

Item has been added to the configuration

Extension cable for stage control 1.6 m (D)

Recover

Item no.: 000000-2121-749

Extension cable for stage control 1.6 m (D)

Item Number: 000000-2121-749

Extension cable for stage control 1.6 m (D) for usage with joystick, trackball or coaxial drive. Recommended for adaptation of cable length when a docking station is used.

Motor control units

Item has been added to the configuration

Stage Controller XY STEP SMC 2009

Recover

Item no.: 432929-9011-000

Stage Controller XY STEP SMC 2009

Item Number: 432929-9011-000

Stage Controller XY STEP SMC 2009 Control unit for Maerzhaeuser XY-Stages with stepper motors. - bidirectional communication to microscopes with CAN - position display on microscopes with TFT display and option for objective depended travel speed - 2 CAN interfaces - alternative connection through USB or RS232 - power supply 100...240V AC/50...60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Stage controller XY PIEZO WSB CAN (D)

Recover

Item no.: 432901-9904-000

Stage controller XY PIEZO WSB CAN (D)

Item Number: 432901-9904-000

Stage controller XY PIEZO WSB CAN (D) for scanning stages with PIEZO drive Interfaces: CAN, USB, RS232, Trigger IN, Trigger OUT incl. USB cable, CAN cable and stage cable 90 - 240 V / 40 - 60 Hz; 250 VA, country specific power cord

Item has been added to the configuration

Controller Z PIEZO WSB 500 (D)

Recover

Item no.: 432339-9010-000

Controller Z PIEZO WSB 500 (D)

Item Number: 432339-9010-000

Controller Z PIEZO WSB 500 (D) Control unit for Stage attachment Z PIEZO WSB 500 - CAN interface - alternative connection through USB or RS232 - Trigger IN - Trigger OUT - power supply 100 ... 240V AC/50 ... 60Hz - incl. USB-cable, CAN-cable and plug-in power unit with country specific power cord

Item has been added to the configuration

Ludl MAC 6000 Filter Wheel Emission TV 60 C 1.0x (D)

Recover

Item no.: 000000-1695-171

Ludl MAC 6000 Filter Wheel Emission TV 60 C 1.0x (D)

Item Number: 000000-1695-171

Ludl MAC 6000 Filter Wheel Emission TV 60 C 1.0x (D) Filter wheel add-on for MAC 6000 XY and Base System controllers, incl. controller/driver module The modular system consists of the following components: - DC motor controller/driver for filter wheel - Single filter wheel (6 position 25mm, without shutter) - Interface 60 C-Mount 1.0x (non adjustable) - Cable (1.5 m) Filter size: accepts 25mm diameter, 7mm thick Filter wheel speed: max. 50ms from one to next filter position

Item has been added to the configuration

Ludl MAC 6000 Single Filter Wheel Pack Excitation (D)

Recover

Item no.: 000000-1695-170

Ludl MAC 6000 Single Filter Wheel Pack Excitation (D)

Item Number: 000000-1695-170

Ludl MAC 6000 Single Filter Wheel Pack Excitation (D) Single filter wheel add-on for MAC 6000 XY and Base System controllers, incl. shutter and controller/driver module The modular system consists of the following components - DC motor controller/driver for filter wheel and shutter - Single filter wheel (6 position 25 / 32 mm) with fast shutter - Zeiss dovetails for stand and lamphouse - Cable (1.5 m) Filter size: accepts 25 / 32 mm diameter, 7 mm thick Filter wheel speed: max. 50 ms from one to next filter position Shutter speed: 15 ms or less to close or open

Item has been added to the configuration

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Recover

Item no.: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D)

Item Number: 000000-1695-168

Ludl MAC 6000 XY Stage Controller Stepper incl. Joystick (D) Control unit for Maerzhaeuser XY-Stages with stepper motors. The modular system contents of the following components: - System base with power supply 230V / 110V, autoswitching - RS-232 host computer interface module incl. serial interface cable - two stepper motor controller modules for X- and Y-axes - Joystick for two axes - two motor cable for Maerzhaeuser stages with stepper motors - adapter for Maerzhaeuser stages with fixed motor cable

Item has been added to the configuration

Ludl MAC 6000 Controller Base System (D)

Recover

Item no.: 000000-1695-137

Ludl MAC 6000 Controller Base System (D)

Item Number: 000000-1695-137

Ludl MAC 6000 Controller Base System (D) Peripheral unit for Ludl Control Modules Consisting of: - System Base with Power supply 230V / 110V, autoswitching - RS-232 host computer interface module incl. serial interface cable (Base unit without stepper motor controller modules)

Control panel motor control

Item has been added to the configuration

Joystick XY; CAN (D)

Recover

Item no.: 432903-9011-000

Joystick XY; CAN (D)

Item Number: 432903-9011-000

Joystick XY; CAN (D) for mechanical stages mot; CAN, scanning stages; CAN and stage controller XY STEP SMC 2009 - 2 speed ranges selectable - direct cable connection to CAN stage or to stage controller XY STEP SMC 2009

Item has been added to the configuration

Control wheel Z PIEZO WSB 500 (D)

Recover

Item no.: 432339-9020-000

Control wheel Z PIEZO WSB 500 (D)

Item Number: 432339-9020-000

Control wheel Z PIEZO WSB 500 (D) with position indicator

Micromanipulation injection (64)

PECON devices

Item has been added to the configuration

Temperable Objective Ring 22.5/32.5 mm S1 (D)

Recover

Item no.: 411882-9081-000

Temperable Objective Ring 22.5/32.5 mm S1 (D)

Item Number: 411882-9081-000

Temperable Objective Ring 22.5/32.5 mm S1 (D) clamping via front dia. 22.5 mm, max. objective dia. 32.5 mm

Item has been added to the configuration

Temperable Objective Ring 17.5/25 mm S1 (D)

Recover

Item no.: 411882-9080-000

Temperable Objective Ring 17.5/25 mm S1 (D)

Item Number: 411882-9080-000

Temperable Objective Ring 17.5/25 mm S1 (D) clamping via front dia. 17.5 mm, max. objective dia. 25 mm

Item has been added to the configuration

Temperable Insert P S1 (D)

Recover

Item no.: 411882-9010-000

Temperable Insert P S1 (D)

Item Number: 411882-9010-000

Temperable Insert P S1 (D)

Item has been added to the configuration

Heating Insert P S1; compact (D)

Recover

Item no.: 411861-9902-000

Heating Insert P S1; compact (D)

Item Number: 411861-9902-000

Heating Insert P S1; compact (D) for Scanning stage XY DC 110x90 with attachment Z PIEZO. Outer dimensions: (W/H/D) 160x110x18 mm

Item has been added to the configuration

Heating Insert M96 S1 (D)

Recover

Item no.: 411860-9160-000

Heating Insert M96 S1 (D)

Item Number: 411860-9160-000

Heating Insert M96 S1 (D) - for mechanical and scanning stages - suitable for flat-bottom microtiter plates of established manufacturers with dimensions: 123.0 (+/-5.5) mm x 83.6 (+/-4.6) mm and skirt heights <= 2.85 mm - control range: Ambient temperature up to 30° above ambient - observation area per well (dia.): 6.0 mm - dimensions (WxHxD): 160 x 135 x 25 mm - frame size: 160 x 110 mm

Item has been added to the configuration

Heating Insert M24 S1 (D)

Recover

Item no.: 411860-9150-000

Heating Insert M24 S1 (D)

Item Number: 411860-9150-000

Heating Insert M24 S1 (D) - for mechanical and scanning stages - suitable for flat-bottom microtiter plates of established manufacturers with dimensions: 123.0 (+/-5.5) mm x 83.6 (+/-4.6) mm and skirt heights <= 2.85 mm - control range: Ambient temperature up to 30° above ambient - observation area per well (dia.): 15.5 mm - dimensions (WxHxD): 160 x 135 x 25 mm - frame size: 160 x 110 mm

Item has been added to the configuration

Heating Insert M12 S1 (D)

Recover

Item no.: 411860-9140-000

Heating Insert M12 S1 (D)

Item Number: 411860-9140-000

Heating Insert M12 S1 (D) - for mechanical and scanning stages - suitable for flat-bottom microtiter plates of established manufacturers, with dimensions: 123.0 (+/-5.5) mm x 83.6 (+/-4.6) mm and skirt heights <= 2.85 mm - control range: Ambient temperature up to 30° above ambient - observation area per well (dia.): 22.0 mm - dimensions (WxHxD): 160 x 135 x 25 mm - frame size: 160 x 110 mm

Item has been added to the configuration

Heating Insert M06 S1 (D)

Recover

Item no.: 411860-9130-000

Heating Insert M06 S1 (D)

Item Number: 411860-9130-000

Heating Insert M06 S1 (D) - for mechanical and scanning stages - suitable for flat-bottom microtiter plates of established manufacturers with dimensions: 123.0 (+/-5.5) mm x 83.6 (+/-4.6) mm and skirt heights <= 2.85 mm - control range: Ambient temperature up to 30° above ambient - observation area per well (dia.): 22.0 mm - dimensions (WxHxD): 160 x 135 x 25 mm - frame size: 160 x 110 mm

Item has been added to the configuration

Heatable universal mounting frame K-H-R S1 (D)

Recover

Item no.: 411860-9081-000

Heatable universal mounting frame K-H-R S1 (D)

Item Number: 411860-9081-000

Heatable universal mounting frame K-H-R S1 (D) - for mechanical stage or scanning stage - with round aperture d=30 mm (central) - for 35 mm petri dishes - temperature range of room temperature up to +50°C

Item has been added to the configuration

Objective heater 33/38 S1 (D)

Recover

Item no.: 411860-9067-000

Objective heater 33/38 S1 (D)

Item Number: 411860-9067-000

Objective heater 33/38 S1 (D) - with oil discharge channel - clamping via front dia. 33 mm - max. objective dia. 38 mm - temperature range of room temperature up to +45°C

Item has been added to the configuration

Objective heater 32/34 S1 (D)

Recover

Item no.: 411860-9066-000

Objective heater 32/34 S1 (D)

Item Number: 411860-9066-000

Objective heater 32/34 S1 (D) - with oil discharge channel - clamping via front dia. 32 mm - max. objective dia. 34 mm - temperature range of room temperature up to +45°C

Item has been added to the configuration

Objective heater 25.5/33 S1 (D)

Recover

Item no.: 411860-9065-000

Objective heater 25.5/33 S1 (D)

Item Number: 411860-9065-000

Objective heater 25.5/33 S1 (D) - with oil discharge channel - clamping via front dia. 25.5 mm - max. objective dia. 33 mm - temperature range of room temperature up to +45°C

Item has been added to the configuration

Objective heater 22.5/34 S1 (D)

Recover

Item no.: 411860-9064-000

Objective heater 22.5/34 S1 (D)

Item Number: 411860-9064-000

Objective heater 22.5/34 S1 (D) - with oil discharge channel - clamping via front dia. 22.5 mm - max. objective dia. 34 mm - temperature range of room temperature up to +45°C

Item has been added to the configuration

Objektive heater 17.5/25 S1 (D)

Recover

Item no.: 411860-9062-000

Objektive heater 17.5/25 S1 (D)

Item Number: 411860-9062-000

Objective heater 17.5/25 S1 (D) - with oil discharge channel - clamping via front dia. 17.5 mm - max. objective dia. 25 mm - temperature range of room temperature up to +45°C

Item has been added to the configuration

Heating insert P Lab-TekTM S1 (D)

Recover

Item no.: 411860-9025-000

Heating insert P Lab-TekTM S1 (D)

Item Number: 411860-9025-000

Heating insert P Lab-TekTM S1 (D) observation area: 46x21 mm, suitable for Lab-TekTM chambers (Nunc®), chamber slides (Nunc®/Falcon®), object slides (max. 76x25 mm), Petri dishes "60" (d=52-58 mm) and "35" (d=35-38 mm) as well as cell cultivation systems POC-R2 and POCmini-2

Item has been added to the configuration

Heating Insert P S1 (D)

Recover

Item no.: 411860-9020-000

Heating Insert P S1 (D)

Item Number: 411860-9020-000

Heating Insert P S1 (D)

Item has been added to the configuration

TempModule S1 (D)

Recover

Item no.: 411860-9010-000

TempModule S1 (D)

Item Number: 411860-9010-000

TempModule S1 (D) - Basic stack module for the temperature control of up to 4 electrically heated S1 components - Power supply for further S1 modules - Eight allocatable parameter sets for control - Resolution: 0.1° C - Temperature accuracy: +/- 0.1°C - Temperature measuring channel for external calibration - CAN and USB connecting cables - 90V...260V AC/50...60Hz/max. 460VA - Country-specific line cable

Item has been added to the configuration

TempController 2000-2 (D)

Recover

Item no.: 411860-9005-000

TempController 2000-2 (D)

Item Number: 411860-9005-000

TempController 2000-2 (D) to control the temperature of up to 2 electrically heated S1 components - Temperature range: room temperature up to 60° C - Display of nominal and actual temperature of two channels - Internal resolution: 0.01° C - Temperature accuracy: +/- 0.1°C - 8 selectable parameter sets for the control - USB port for external temperature control - 90V...260V AC/50...60Hz/max. 200VA - country-specific power cable Dimensions (LxWxH): 280 x 200 x 130 mm

Item has been added to the configuration

LED in-cabin illuminator for incubator XL S1 DARK (D)

Recover

Item no.: 411857-9600-000

LED in-cabin illuminator for incubator XL S1 DARK (D)

Item Number: 411857-9600-000

LED in-cabin illuminator for incubator XL S1 DARK (D) with plug-in power unit 90-230V incl. mains input plugs for EU, UK, US/JAP, EN60601

Item has been added to the configuration

Slide-in module XLmulti S2 DARK Camera, right (D)

Recover

Item no.: 411857-9580-000

Slide-in module XLmulti S2 DARK Camera, right (D)

Item Number: 411857-9580-000

Slide-in module XLmulti S2 DARK Camera, right (D) Right hand slide-in module for Incubator XLmulti S2 DARK; geometry designed for bigger components at the right hand sideport (EMCCD cameras, Duolink). Restricted access to microscope components (reflector change, DIC adjustment, objective selection)

Item has been added to the configuration

Slide-in module XLmulti S2 DARK Standard, right (D)

Recover

Item no.: 411857-9570-000

Slide-in module XLmulti S2 DARK Standard, right (D)

Item Number: 411857-9570-000

Slide-in module XLmulti S2 DARK Standard, right (D) Right hand slide-in module for Incubators XLmulti S2 DARK; geometry designed for smaller components at the right hand sideport. Easy access to microscope components (reflector change, DIC adjustment, objective selection)

Item has been added to the configuration

Incubator XLmulti S1 (D)

Recover

Item no.: 411857-9400-000

Incubator XLmulti S1 (D)

Item Number: 411857-9400-000

Incubator XLmulti S1 (D) for Axio Observer; multi compatible incubator base for standard applications; modular upgrading concept for slide-in modules

Item has been added to the configuration

Incubator XLmulti S2 DARK Premium (D)

Recover

Item no.: 411857-9320-000

Incubator XLmulti S2 DARK Premium (D)

Item Number: 411857-9320-000

Incubator XLmulti S2 DARK Premium (D) for Axio Observer. Multi compatible black incubator base with adjustable LED illumination; modular concept for slide-in modules XLmulti S2 DARK right, contains: - slide-in module, left - air guiding tube 1.5m - internal shelf for samples and medium - holder for humidifier bottle - tray for CO2-Cover - sliding doors for easy access of the incubator's interior

Item has been added to the configuration

Incubator XLmulti S2 DARK Standard (D)

Recover

Item no.: 411857-9310-000

Incubator XLmulti S2 DARK Standard (D)

Item Number: 411857-9310-000

Incubator XLmulti S2 DARK Standard (D) for Axio Observer. Multi compatible black incubator base with standard illumination; modular concept for slide-in modules XLmulti S2 DARK right, contains: - slide-in module, left - air guiding tube 1.5 m - internal shelf for samples and medium - holder for humidifier bottle - tray for CO2-Cover - sliding doors for easy access of the incubator's interior

Item has been added to the configuration

CO2-Cover PM S1 (D)

Recover

Item no.: 411857-9110-000

CO2-Cover PM S1 (D)

Item Number: 411857-9110-000

CO2-Cover PM S1 (D)

Item has been added to the configuration

CO2 Cover Micromanipulation S1 (D)

Recover

Item no.: 411857-9100-000

CO2 Cover Micromanipulation S1 (D)

Item Number: 411857-9100-000

CO2 Cover Micromanipulation S1 (D)

Item has been added to the configuration

Control Sensor T 2000, Petri 60, sterilizable (D)

Recover

Item no.: 411857-9085-000

Control Sensor T 2000, Petri 60, sterilizable (D)

Item Number: 411857-9085-000

Control Sensor T 2000, Petri 60, sterilizable (D) for control of the current temperature at the sample in 60 mm Petri dishes during observation. Implemented as glass lid with sensor mounted peripherally. Sterilizable.

Item has been added to the configuration

Control Sensor T S1 (D)

Recover

Item no.: 411857-9080-000

Control Sensor T S1 (D)

Item Number: 411857-9080-000

Control Sensor T S1 (D)

Item has been added to the configuration

Heating Device Humidity S1 (D)

Recover

Item no.: 411857-9050-000

Heating Device Humidity S1 (D)

Item Number: 411857-9050-000

Heating Device Humidity S1 (D)

Item has been added to the configuration

O2 Module S1 (D)

Recover

Item no.: 411857-9040-000

O2 Module S1 (D)

Item Number: 411857-9040-000

O2 Module S1 (D) - Stack module for O2 control - Power supply and control through TempModule S1 - O2 concentration stable between 1 and 21% (+/- 0,1% adjustable) - with humidity module 2 (500 ml phial)

Item has been added to the configuration

Heating Unit XL S2 (D)

Recover

Item no.: 411857-9031-000

Heating Unit XL S2 (D)

Item Number: 411857-9031-000

Heating Unit XL S2 (D)

Item has been added to the configuration

Incubator Micromanipulation S1 (D)

Recover

Item no.: 411857-9025-000

Incubator Micromanipulation S1 (D)

Item Number: 411857-9025-000

Incubator Micromanipulation S1 (D)

Item has been added to the configuration

Incubator PM S1 (D)

Recover

Item no.: 411857-9020-000

Incubator PM S1 (D)

Item Number: 411857-9020-000

Incubator PM S1 (D)

Item has been added to the configuration

CO2 Module S1 (D)

Recover

Item no.: 411857-9010-000

CO2 Module S1 (D)

Item Number: 411857-9010-000

CO2 Module S1 (D) - Stack module for CO2 control - Power supply and control through TempModule S1 - CO2 concentration stable between 1 and 8% (+/- 0.1% adjustable) - with humidity module 1 (250 ml phial)

Item has been added to the configuration

Air duct tube, extension, 1m (D)

Recover

Item no.: 000000-2180-519

Air duct tube, extension, 1m (D)

Item Number: 000000-2180-519

Air duct tube, extension, 1m (D) for all XL S1 and XLmulti S1 incubators

Item has been added to the configuration

Glass cover for Petri dishes "60"; suitable for DIC (D)

Recover

Item no.: 000000-1847-181

Glass cover for Petri dishes "60"; suitable for DIC (D)

Item Number: 000000-1847-181

Glass cover for Petri dishes "60"; suitable for DIC (D)

Item has been added to the configuration

Glass cover for Petri dishes "35"; suitable for DIC (D)

Recover

Item no.: 000000-1792-942

Glass cover for Petri dishes "35"; suitable for DIC (D)

Item Number: 000000-1792-942

Glass cover for Petri dishes "35"; suitable for DIC (D)

Item has been added to the configuration

CultFoil (25 µm) for multitest dishes

Recover

Item no.: 000000-1156-839

CultFoil (25 µm) for multitest dishes

Item Number: 000000-1156-839

CultFoil (25 µm) for multitest dishes 20 pcs

Item has been added to the configuration

Foil Cover for multitest dishes

Recover

Item no.: 000000-1156-838

Foil Cover for multitest dishes

Item Number: 000000-1156-838

Foil Cover for multitest dishes with mounting block and 20 pc of CultFoil, for multitest dishes M06, M12, M24 and M96

Item has been added to the configuration

CultFoil (25 µm) for Petri dishes "60"

Recover

Item no.: 000000-1116-086

CultFoil (25 µm) for Petri dishes "60"

Item Number: 000000-1116-086

CultFoil (25 µm) for Petri dishes "60" 20 pcs

Item has been added to the configuration

Foil cover for Petri dishes "60"

Recover

Item no.: 000000-1116-085

Foil cover for Petri dishes "60"

Item Number: 000000-1116-085

Foil cover for Petri dishes "60"

Item has been added to the configuration

CultFoil (25 µm) for Petri dishes "35"

Recover

Item no.: 000000-1116-084

CultFoil (25 µm) for Petri dishes "35"

Item Number: 000000-1116-084

CultFoil (25 µm) for Petri dishes "35" 20 pcs

Item has been added to the configuration

Foil cover for Petri dishes "35"

Recover

Item no.: 000000-1116-083

Foil cover for Petri dishes "35"

Item Number: 000000-1116-083

Foil cover for Petri dishes "35"

Item has been added to the configuration

CultFoil (25 µm) for POC-R2

Recover

Item no.: 000000-1116-082

CultFoil (25 µm) for POC-R2

Item Number: 000000-1116-082

0ultFoil (25 µm) for POC-R2 cell cultivation system, 20 pieces

Item has been added to the configuration

Foil cover for POC-R2

Recover

Item no.: 000000-1116-081

Foil cover for POC-R2

Item Number: 000000-1116-081

Foil cover for POC-R2 cell cultivation system

Item has been added to the configuration

Perfusion insert, open, with lid for POC-R2

Recover

Item no.: 000000-1116-080

Perfusion insert, open, with lid for POC-R2

Item Number: 000000-1116-080

Perfusion insert, open, with lid for POC-R2 cell cultivation system

Item has been added to the configuration

POC-R2 cell cultivation system

Recover

Item no.: 000000-1116-079

POC-R2 cell cultivation system

Item Number: 000000-1116-079

POC-R2 cell cultivation system for perfusion, open and closed cultivation

Item has been added to the configuration

CO2-Cover HM

Recover

Item no.: 000000-0441-342

CO2-Cover HM

Item Number: 000000-0441-342

CO2-Cover HM for heating inserts M06, M12, M24 and M96

Item has been added to the configuration

CO2-Cover HP for heating insert P

Recover

Item no.: 000000-0441-341

CO2-Cover HP for heating insert P

Item Number: 000000-0441-341

CO2-Cover HP for heating insert P

Item has been added to the configuration

CO2-Cover KH

Recover

Item no.: 000000-0441-340

CO2-Cover KH

Item Number: 000000-0441-340

CO2-Cover KH for heatable universal mounting frames K-H and K-H-L

Item has been added to the configuration

CultFoil (25 µm) for POCmini-2

Recover

Item no.: 000000-0441-339

CultFoil (25 µm) for POCmini-2

Item Number: 000000-0441-339

CultFoil (25 µm) for POCmini-2 cell cultivation system, 25 pcs

Item has been added to the configuration

Foil Cover for POCmini-2 cell cultivation system

Recover

Item no.: 000000-0441-338

Foil Cover for POCmini-2 cell cultivation system

Item Number: 000000-0441-338

Foil Cover for POCmini-2 cell cultivation system

Item has been added to the configuration

Perfusion insert, open, with lid for POCmini-2

Recover

Item no.: 000000-0441-337

Perfusion insert, open, with lid for POCmini-2

Item Number: 000000-0441-337

Perfusion insert, open, with lid for POCmini-2 cell cultivation system

Various manipulation and injection devices

Item has been added to the configuration

Refrigerated circulator Corio CP-200F 230V GB (D)

Recover

Item no.: 411882-9050-000

Refrigerated circulator Corio CP-200F 230V GB (D)

Item Number: 411882-9050-000

Refrigerated circulator Corio CP-200F 230V GB (D) - for sample temperature control from 0°C to 45°C (using coolant) - USB controlled, Temperature setting via keypad on the device - Temperature stability +/- 0.03 °C - Flow rate 8-27 l/min - 230V/50-60Hz UK type BS1363A power plug - dimensions 23 x 39 x 65 cm

Item has been added to the configuration

Mounting Frame K Thermo Plate with Controller (D)

Recover

Item no.: 411860-9093-000

Mounting Frame K Thermo Plate with Controller (D)

Item Number: 411860-9093-000

Mounting Frame K Thermo Plate with Controller (D) - glass plate made of toughened glass - glass thickness: 0.5 mm (over entire glass plate surface) - LED status report - controller with LCD display: temperature range: room temperature up to 50°C resolution: 0.1° C temperature accuracy: +/- 0.1°C 100V-240V AC/50-60Hz/max. 50VA - country specific power cable

Item has been added to the configuration

Multichannel peristaltic pump

Recover

Item no.: 000000-1116-111

Multichannel peristaltic pump

Item Number: 000000-1116-111

Multichannel peristaltic pump for perfusion with POC-R cell cultivation system

Narishige devices

Item has been added to the configuration

Microscope adapter NZ-24 for micromanipulator (D)

Recover

Item no.: 411831-9320-000

Microscope adapter NZ-24 for micromanipulator (D)

Item Number: 411831-9320-000

Microscope adapter NZ-24 for micromanipulator (D) Pair of adapters for mounting the micromanipulators MM94 and MM94B (Micromanipulator sets, motorized) at the carrier for transmitted light illumination. Suitable for Axio Observer and Axio Vert.A1.

Item has been added to the configuration

Microinjector IM-21, hydraulic (D)

Recover

Item no.: 411831-9080-000

Microinjector IM-21, hydraulic (D)

Item Number: 411831-9080-000

Microinjector IM-21, hydraulic (D) - Movement range 20 mm, full rotation of knob 500 µm / apprx. 10µl Use within the EU for research purposes only.

Item has been added to the configuration

Microinjector IM-11-2, pneumatic (D)

Recover

Item no.: 411831-9070-000

Microinjector IM-11-2, pneumatic (D)

Item Number: 411831-9070-000

Microinjector IM-11-2, pneumatic (D) - 40 mm plunger Use within the EU for research purposes only.

Item has been added to the configuration

Micromanipulator MTK-1-Z1, Axio Observer (D)

Recover

Item no.: 411831-9000-000

Micromanipulator MTK-1-Z1, Axio Observer (D)

Item Number: 411831-9000-000

Micromanipulator MTK-1-Z1, Axio Observer (D) hydraulic micromanipulator with 4-axis hanging joystick set including both handed manipulators and adapter for Axio Observer Use within the EU for research purposes only, not for applications covered by IVDD 98/79/EC. Maximum movement range X/Y/Z-axis: 10 mm - Oil hydraulic control - Movement of 250 µm/rot. - Minimum graduation 5 µm Maximum movement range T-axis (for holder): 10 mm - Oil hydraulic control - Movement of 1,000 µm/rot. - Minimum graduation 20 µm - Manual mechanical (Return to Home position) 50 mm - Incident angle 15...40°

Item has been added to the configuration

Microscope Adapter NZ-19-2 for MM-94/94B (D)

Recover

Item no.: 000000-2268-299

Microscope Adapter NZ-19-2 for MM-94/94B (D)

Item Number: 000000-2268-299

Microscope Adapter NZ-19-2 for MM-94/94B (D) to mount MM-94/94B micromanipulators on Axio Observer and Axio Vert.A1 stands

Item has been added to the configuration

Micromanipulator set, motorized, right and left (D)

Recover

Item no.: 000000-2268-296

Micromanipulator set, motorized, right and left (D)

Item Number: 000000-2268-296

Micromanipulator set, motorized, right and left (D) - motorized micromanipulator MM-94 (right) with controller - motorized micromanipulator MM-94B (left) - 2x hydraulic micromanipulator MMO-4 with 3-axis hanging joystick Use within the EU for research purposes only, not for applications covered by IVDD 98/79/EC. Specifications: MM-94/94B: consisting of motorized coarse manipulators and controller Maximum movement range (coarse) for X/Y/Z: 22 mm Driving speed X/Y axis: - 1.4 mm/s (with use of high-speed button) - speed range: 0.1 - 0.7 mm/s (with use of speed adjusting knob) Driving speed Z axis: - 2.8 mm/s (with use of high-speed button) - speed range: 0.2 - 1.4 mm/s (with use of speed adjusting knob) Power supply control unit (MM-94): - 100...240V AC, 50/60Hz, approx. 10W MMO-4: Maximum movement range (fine) for X/Y/Z: 10 mm - movement of 250 µm/rot. - Minimum graduation 2 µm - Movement range: Joystick (for maximum movement in X-Y plane) 2 mm - including universal joint UT-10 for pipette attachment

Item has been added to the configuration

Micromanipulator set, motorized, right side (D)

Recover

Item no.: 000000-2268-293

Micromanipulator set, motorized, right side (D)

Item Number: 000000-2268-293

Micromanipulator set, motorized, right side (D) - motorized micromanipulator MM-94 (right) with controller - hydraulic micromanipulator MMO-4 with 3-axis hanging joystick Use within the EU for research purposes only, not for applications covered by IVDD 98/79/EC. Specifications: MM-94: consisting of motorized coarse manipulator and controller Maximum movement range (coarse) for X/Y/Z: 22 mm Driving speed X/Y axis: - 1.4 mm/s (with use of high-speed button) - speed range: 0.1 - 0.7 mm/s (with use of speed adjusting knob) Driving speed Z axis: - 2.8 mm/s (with use of high-speed button) - speed range: 0.2 - 1.4 mm/s (with use of speed adjusting knob) Power supply control unit (MM-94): - 100...240V AC, 50/60Hz, approx. 10W MMO-4: Maximum movement range (fine) for X/Y/Z: 10 mm - movement of 250 µm/rot. - Minimum graduation 2 µm - Movement range: Joystick (for maximum movement in X-Y plane) 2 mm - including universal joint UT-10 for pipette attachment

Item has been added to the configuration

HD-21 Double Pipette Holder (D)

Recover

Item no.: 000000-1122-427

HD-21 Double Pipette Holder (D)

Item Number: 000000-1122-427

HD-21 Double Pipette Holder (D)

Apotome (1)

Grid valve

Item has been added to the configuration

Slider assembly Apotome 3 for Axio Observer

Recover

Item no.: 423667-9010-000

Slider assembly Apotome 3 for Axio Observer

Item Number: 423667-9010-000

Slider assembly Apotome 3 for Axio Observer consisting of: slider with control electronics and transmission grids with 3 frequencies, reflector module calibration Apotome ACR P&C for LED and white light source, mirror and fluorescence test slides, cable CAN-BUS, case.

Laser TIRF (3)

Accessories for TIRF laser module

Item has been added to the configuration

Signal distribution box Rev.3 for Trigger-Board

Recover

Item no.: 432927-9042-000

Signal distribution box Rev.3 for Trigger-Board

Item Number: 432927-9042-000

Signal distribution box Rev.3 for Trigger-Board

Adjustment tools

Item has been added to the configuration

Adjustment tool for Vivatome

Recover

Item no.: 423639-9050-000

Adjustment tool for Vivatome

Item Number: 423639-9050-000

Adjustment tool for Vivatome

Laser safety components

Item has been added to the configuration

Slide-in module standard XLmulti / XLmulti RED S1 (D)

Recover

Item no.: 411857-9511-000

Slide-in module standard XLmulti / XLmulti RED S1 (D)

Item Number: 411857-9511-000

Slide-in module standard XLmulti / XLmulti RED S1 (D) lateral slide-in module for incubators XLmulti S1 and XLmulti S1 RED LS; for all standard applications at the left sideport. Compatible to Definite Focus.

Image processing (83)

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 820 mono

Recover

Item no.: 426560-9190-000

Microscopy Camera Axiocam 820 mono

Item Number: 426560-9190-000

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter "Backside Illuminated" Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm, (square field of view), equivalent to 1.1" (17,4 mm diagonal) Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86% @ 520 nm (typ.), "backside illuminated" design Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor(full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) FrameRate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower framerates and without cooling) OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 820 color

Recover

Item no.: 426560-9180-000

Microscopy Camera Axiocam 820 color

Item Number: 426560-9180-000

Microscopy Camera Axiocam 820 color High performance microscopy color camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Sony IMX 541, Color Filter Array, Global Shutter, Backside Illuminated Number of Pixels: 4512 (H) x 4512 (V) = 20.3 Mega Pixels Pixel Size: 2.74 µm x 2.74 µm Chip Size: 12.4 mm x 12.4 mm (square field of view), equivalent to 1.1" (17,4 mmdiagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 10,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 4512 x 4512 1x1 basic pixel count 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1 ms H x V Frame Rate 4512 x 4512 >20 fps (High Res mode, high CPU load) 2256 x 2256 >30 fps (default: Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 4512 x 4512 28 2256 x 2256 75 (2x2 subsampling; full field of view) 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512 x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range (at gain) 2.3 e (1x) 10,000 e 1:4440 1.8 e (2x) 5,500 e 1:2720 1.6 e (4x) 2,500 e 1:1540 1.5 e (8x) 1,250 e 1: 850 1.3 e (16x) 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment withcontinuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.1 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 ° C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Colorcoded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x5 Gbit/s for data and power supply (optional single USB 3.0 at lowerframe rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodized aluminum, withcooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relativeair humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 mono (D)

Recover

Item no.: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D)

Item Number: 426560-9160-000

Microscopy Camera Axiocam 807 mono (D) High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, monochrome, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With protection glass, 350 nm to 1000 nm Peak QE: 78% @ 520 nm (typ.) Full Well Capacity: Approx. 25,000 e- at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 11042x2 1072 x 991 3x3 884 x 743 4x4 643 x 594 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216x2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104>30 fps (Fast Mode, reduced CPU load) Frame rates for time series recording (1 ms exposure, further depending on sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1608 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1: 930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:25,000 SoftwareSupported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s @ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure time control Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed,2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and without cooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2"x 3.1" x 2.4")/ 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W powerconsumption Environmental Conditions: 5 °C to 35 °C, max.80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 807 color (D)

Recover

Item no.: 426560-9150-000

Microscopy Camera Axiocam 807 color (D)

Item Number: 426560-9150-000

Microscopy Camera Axiocam 807 color (D) High performance microscopy color camera incl. driver software 64bit, interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: CMOS, Color filter array, Global Shutter, Sony IMX420 Number of Pixels: 3216 (H) x 2208 (V) = 7.1 Mega Pixels Pixel Size: 4.5 µm x 4.5 µm Chip Size: 14.5 mm x 9.9 mm, equivalent to 1.1" (17,6 mm diagonal) Spectral Range: With IR barrier filter approx. 400 nm to 720 nm Full Well Capacity: Approx. 25,000 e- at gain 1x(typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (digital) 3216 x 2208 1x1 basic pixel count 1608 x 1104 2x2 1072 x 736 3x3 884 x 552 4x4 643 x 441 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) H x V Subsampling Factor (full field of view) 3216 x 2208 1x1 1608 x 1104 2x2 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms H x V Frame Rate 3216 x 2208 >30 fps (High Res mode) 1602 x 1104 >30 fps (Fast Mode,reducedCPUload) Frame rates for time series recording (1 ms exposure, further depending on Sensor ROI, hardware and software configuration) H x V (ROI) Frame Rate (fps) 3216 x 2208 73 1929 x 1080 145 1602 x 1104 260 (2x2 subsampling; full field of view) 1024 x 1024 151 512 x 512 282 1920 x 256 487 Read Noise Full Well Capacity Dynamic Range (at gain) 5.7 e (1x) 25,000 e 1:4420 4.6 e (2x) 12,500 e 1:2730 3.9 e (4x) 6,250 e 1:1610 3.4 e (8x) 3,125 e 1:..930 2.9 e (16x) 1,500 e 1: 530 Low Noise Mode: 4.0 e 25,000 e 1:6230 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area (spot-meter), Adjustable color saturation, White balance adjustment interactive or automatic mode with selectable target white balance color (warmer / colder), Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)> 0.3 e/p/s@ 25 °C sensor temperature Cooling: Stabilized temperature to 25 °C (mounted on microscope, free air flow, ambient temp. 22 °C) Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply (optional single USB 3.0 at lower frame rates and withoutcooling) Optical Interface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm (4.2" x 3.1" x 2.4") / 620 g Housing: Blue anodizedaluminum, with cooling fins on top 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported OperatingSystems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 (blue edition) or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 705 pol R2 (D)

Recover

Item no.: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D)

Item Number: 426560-9071-000

Microscopy Camera Axiocam 705 pol R2 (D) High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass (wideband coated) Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask (90°, 45°, 135°, 0°) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel Pixel Size: 3.45 µm x 3.45 µm Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x (typ.) Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor (1x1) 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 (at 2x2 combined analog and digital binning for further increase of sensitivity) Live Frame Rates: (1 ms exposure, default setting, simplified color coding) H x V Frame Rate (fps) 2464 x 2056 25 (1ms exposure time, ROI 1920 x 1080, standard color coding) H x V Frame Rate (fps) 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range (at gain) 2.20 e (1x) 11,000 e 1:5000 1.74 e (2x) 5,000 e 1:3100 1.48 e (4x) 2,700 e 1:1800 1.29 e (8x) 1,300 e 1:1300 1.15 e (16x) 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area (spot- meter) Readout of Sensor Sub Regions ("ROI"): Adjustable Digitization: 8, 12, 14 bit / pixel (8 out of 14 bit or compression mode) Dark Current: <(><<)>0.5 e/p/s @ 18 °C sensor temperature Cooling: Stabilized temperature to 18 °C (for ambient temperatures from 18 °C to 30 °C) Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status (further accessories required) Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 (Optional operation withUSB 2.0 at reduced frame rate) Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm (2.3"x 3.2" x 2,0") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 °C to 35 °C, max. 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 mono (D)

Recover

Item no.: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D)

Item Number: 426560-9040-000

Microscopy Camera Axiocam 305 mono (D) Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 µm x 3.45 µm Chip size: 8.5 mm x 7.1 mm, equivalent to diagonal 11.1 mm (2/3" form factor) Spectral range: app. 350 nm to 1000 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° C +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.6 (blue edition) or higher, ZEN core v2.7 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Digital Microscopy Camera Axiocam 305 color R2 (D)

Recover

Item no.: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D)

Item Number: 426560-9031-000

Digital Microscopy Camera Axiocam 305 color R2 (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) FrameRate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum,with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 (blue edition, Hotfix 3.6.6) or higher, ZEN core 3.5 (Hotfix 3.5.4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 305 color (D)

Recover

Item no.: 426560-9030-000

Microscopy Camera Axiocam 305 color (D)

Item Number: 426560-9030-000

Microscopy Camera Axiocam 305 color (D) Microscopy camera incl. Driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608 x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V (ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0 connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or higher, ZEN core v2.5 or higher Labscope v3.3 (Windows) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 702 mono (D)

Recover

Item no.: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D)

Item Number: 426560-9010-000

Microscopy Camera Axiocam 702 mono (D) High performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and BK7 protection glass (coated) Number of Pixels: 1920 (H) x 1216 (V) = 2.3 Mega Pixels Pixel size: 5.86 µm x 5.86 µm Chip size: 11.3 mm x 7.1 mm, equivalent to 1/1.2" (13.3 mm diagonal) Spectral range: With protection glass app. 350 nm to 1000 nm Quantum Efficiency 72% at 520 nm (including sensor cover slip) Max. Full Well Capacity: Approx. 32.000 e Selectable Resolution: H x V Binning Faktor (digital) 1920 x 1216 1x1 basic pixel count 960 x 608 2x2 640 x 404 3x3 480 x 304 4x4 384 x 240 5x5 Live frame rates (depending on hardware and software configuration): Exp. Time 1ms, H x V Frame Rate 1936 x 1460 >100 fps Frame rates for time series recording (depending on computer hardware and software configuration) H x V Frame Rate 1920 x 1216 128 1920 x 1080 145 960 x 612 245 480 x 306 458 384 x 244 557 1280 x 112 982 1024 x 112 1003 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit (internal 12 Bit ADC, 14 Bit by data processing) Dynamic Range: Typical >5000 : 1 (74> dB) at typ. <(><<)> 6.e readout noise Dark current: ca. 1.1 e/p/s Integration Time: 0.1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 15°C sensor temperature, Additional digital dark current compensation, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 300 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 4.7 MB at 1936 x 1460 pixels at 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 2 (blue edition) or higher, ZEN core v2.7 or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

Microscopy Camera Axiocam 503 color (D)

Recover

Item no.: 426558-0000-000

Microscopy Camera Axiocam 503 color (D)

Item Number: 426558-0000-000

Microscopy Camera Axiocam 503 color (D) High Performance microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, dual USB 3.0/USB 2.0 cable 3 m and IR barrier filter BG 40 (coated) Number of Pixels: 1936 (H) x 1460 (V) = 2.8 Mega Pixels Pixel size: 4.54 µm x 4.54 µm Chip size: 8.8 mm x 6.6 mm, equivalent to 2/3" (11 mm diagonal) Spectral range: With IR barrier filter app. 400 nm to 720 nm Max. Full Well Capacity: Approx. 15.000 e Selectable Resolution: H x V Binning Factor 1936 x 1460 1x1 Basic Resolution 968 x 728 2x2 Monochrome 640 x 484 3x3 Color/Monochrome 480 x 364 4x4 Monochrom 384 x 292 5x5 Color/Monochrom Selectable color interpolation quality levels: "High Speed Color" for fastest processing speed or "High Quality Color" for best interpolation results High Quality Black and White conversion mode. Live frame rates (depending on hardware and software configuration): Exp. Time 10ms, color enhancement off, 39 Mhz pixel clock, Quadport Readout H x V Binning Factor Frame Rate, 1936 x 1460 1 38 640 x 484 3 76 384 x 292 5 93 Frame rates for time series recording Continuous Mode with 39 Mhz pixel clock and QuadPort Readout (depending on computer hardware and software configuration) H x V Binning Factor Frame Rate 1936 x 1460 1 38 968 x 728 2 61 640 x 484 3 76 480 x 364 4 87 384 x 292 5 93 Timelapse recording with "Burst Mode"-function Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 14 Bit / 39 MHz or 13 MHz pixel clock Dynamic Range: Typical >2500: 1 (>68 dB) at typ. <(><<)> 6.5 e readout noise Dark current: ca. 0.06 e/p/s Integration Time: 1 ms to 60 s Cooling: One stage Peltier cooling, regulated to 18°C sensor temperature, Additional digital dark current compensation, Calibrated color space optimization, Eight pre-loadable sets of imaging parameters for speed optimized multi modal image acquisition, acquisition Time Stamp with image data, Status-LED for Camera: color coded operation status, dimmable, Status-LED for Trigger: color coded trigger status, dimmable, I/O Control signals: galvanic isolated I/O signals for exposure time, readout time, trigger ready, (i.e. for controlling external mechanical shutters), one trigger input for exposure control, 5V auxiliary voltage, GND Interface: USB 3.0, 240 MBytes/s, 3 m double-USB cable with USB 3.0/USB 2.0, Optional operation with USB 2.0 connection at reduced frame rate, Optional operation without cooling for use at short exposure times with reduced power consumption, Optical Interface: C-Mount, Teflon coated thread Thread depth for objectives: max. 5 mm Max. file size per image: app. 17 MB at 1936 x 1460 pixels at 3 x 14 bit/pixel Size / Weight: app. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 500 g Housing: blue anodized aluminum, with cooling fins, 1/4" photo thread for tripod mount Registration: CE, Power Supply: power supply provided by USB 3.0 bus for camera electronics and USB 2.0 for Peltier-cooling, Power consumption: 7W (5V, 1.4A) Environmental conditions: 5° ... +35° Celsius, max 80% relative air humidity, not condensing, free air circulation required Operating Systems: Windows 10 Enterprise embedded x64 and older Windows x64 systems

Item has been added to the configuration

Trigger Cable Set Axiocam 5xx/7xx (D)

Recover

Item no.: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx (D)

Item Number: 426557-0001-000

Trigger Cable Set Axiocam 5xx/7xx/8xx (D) for direct shutter synchronization using trigger board with signal distribution box, Colibri or HXP 120 V

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam FireWire HS/MRc5/HR/MR-Rev.3 Trigger Cable Set TL/RL (D)

Recover

Item no.: 426506-0002-000

AxioCam FireWire HS/MRc5/HR/MR-Rev.3 Trigger Cable Set TL/RL (D)

Item Number: 426506-0002-000

AxioCam FireWire HS/MRc5/HR/MR-Rev.3 Trigger Cable Set TL/RL (D) for direct shutter synchronization using Ludl, Uniblitz, VIS-LED, HXP Trigger Cable or microscope internal control

MCP Contoller

Item has been added to the configuration

Shutter high speed, external

Recover

Item no.: 423627-9901-000

Shutter high speed, external

Item Number: 423627-9901-000

Shutter high speed, external UNIBLITZ shutter with optional control via microscope stand or UNIBLITZ controller Microscope stand control: switching time < 50 ms Frequency max. 5 Hz UNIBLITZ control: switching time < 8 ms Frequency max. 10 Hz (short-time 40 Hz)

Item has been added to the configuration

UNIBLITZ Shutter Controller VCM-D1 Rev.2 (D)

Recover

Item no.: 000000-1853-062

UNIBLITZ Shutter Controller VCM-D1 Rev.2 (D)

Item Number: 000000-1853-062

UNIBLITZ Shutter Controller VCM-D1 Rev.2 (D) Controller unit for UNIBLITZ Shutter incl. shutter interconnect cable and RS232 interface cable to the computer. Power Supply 115/230 V with country specific plug

Computers

Item has been added to the configuration

Language Pack Russian RU (O)

Recover

Item no.: 410380-1200-000

Language Pack Russian RU (O)

Item Number: 410380-1200-000

Language Pack Russian RU (O) - Keyboard with Russian layout

Item has been added to the configuration

Language Pack Japanese JP (O)

Recover

Item no.: 410380-1100-000

Language Pack Japanese JP (O)

Item Number: 410380-1100-000

Language Pack Japanese JP (O) - Keyboard with Japanese layout

Item has been added to the configuration

Language Pack Belgian BE (O)

Recover

Item no.: 410380-1000-000

Language Pack Belgian BE (O)

Item Number: 410380-1000-000

Language Pack Belgian BE (O) - Keyboard with Belgian layout

Item has been added to the configuration

Language Pack Polish PL (O)

Recover

Item no.: 410380-0900-000

Language Pack Polish PL (O)

Item Number: 410380-0900-000

Language Pack Polish PL (O) - Keyboard with Polish layout

Item has been added to the configuration

Language Pack Dutch NL (O)

Recover

Item no.: 410380-0800-000

Language Pack Dutch NL (O)

Item Number: 410380-0800-000

Language Pack Dutch NL (O) - Keyboard with Dutch layout

Item has been added to the configuration

Language Pack Spanish ES (O)

Recover

Item no.: 410380-0700-000

Language Pack Spanish ES (O)

Item Number: 410380-0700-000

Language Pack Spanish ES (O) - Keyboard with Spanish layout

Item has been added to the configuration

Language pack Swedish SE (O)

Recover

Item no.: 410380-0600-000

Language pack Swedish SE (O)

Item Number: 410380-0600-000

Language pack Swedish SE (O) - Keyboard with Swedish layout

Item has been added to the configuration

Language Pack Italian IT (O)

Recover

Item no.: 410380-0500-000

Language Pack Italian IT (O)

Item Number: 410380-0500-000

Language Pack Italian IT (O) - Keyboard with Italian layout

Item has been added to the configuration

Language Pack French FR (O)

Recover

Item no.: 410380-0400-000

Language Pack French FR (O)

Item Number: 410380-0400-000

Language Pack French FR (O) - Keyboard with French layout

Item has been added to the configuration

Language Pack English UK (O)

Recover

Item no.: 410380-0300-000

Language Pack English UK (O)

Item Number: 410380-0300-000

Language Pack English UK (O) - Keyboard with English (UK) layout

Item has been added to the configuration

Language Pack English US (O)

Recover

Item no.: 410380-0200-000

Language Pack English US (O)

Item Number: 410380-0200-000

Language Pack English US (O) - Keyboard with English (US) layout

Item has been added to the configuration

Language Pack German DE (O)

Recover

Item no.: 410380-0100-000

Language Pack German DE (O)

Item Number: 410380-0100-000

Language Pack German DE (O) - Keyboard with German layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Russian (O)

Recover

Item no.: 410377-1200-000

Language Package Windows 7 Ultimate Embedded x64 Russian (O)

Item Number: 410377-1200-000

Language Package Windows 7 Ultimate Embedded x64 Russian (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with cyrillic/english layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Japanese (O)

Recover

Item no.: 410377-1100-000

Language Package Windows 7 Ultimate Embedded x64 Japanese (O)

Item Number: 410377-1100-000

Language Package Windows 7 Ultimate Embedded x64 Japanese (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with japanese layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Belgian (O)

Recover

Item no.: 410377-1000-000

Language Package Windows 7 Ultimate Embedded x64 Belgian (O)

Item Number: 410377-1000-000

Language Package Windows 7 Ultimate Embedded x64 Belgian (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with belgian layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Polish (O)

Recover

Item no.: 410377-0900-000

Language Package Windows 7 Ultimate Embedded x64 Polish (O)

Item Number: 410377-0900-000

Language Package Windows 7 Ultimate Embedded x64 Polish (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with polish layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Dutch (O)

Recover

Item no.: 410377-0800-000

Language Package Windows 7 Ultimate Embedded x64 Dutch (O)

Item Number: 410377-0800-000

Language Package Windows 7 Ultimate Embedded x64 Dutch (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with dutch layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Spanish (O)

Recover

Item no.: 410377-0700-000

Language Package Windows 7 Ultimate Embedded x64 Spanish (O)

Item Number: 410377-0700-000

Language Package Windows 7 Ultimate Embedded x64 Spanish (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with spanish layout

Item has been added to the configuration

Language Package Windows 7 Ultimate Embedded x64 Swedish (O)

Recover

Item no.: 410377-0600-000

Language Package Windows 7 Ultimate Embedded x64 Swedish (O)

Item Number: 410377-0600-000

Language Package Windows 7 Ultimate Embedded x64 Swedish (O) - Windows 7 Ultimate Embedded SP1 x64 operating system - Keyboard with swedish layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Russian (O)

Recover

Item no.: 410376-1200-000

Language Package Windows 10 Enterprise Embedded x64 Russian (O)

Item Number: 410376-1200-000

Language Package Windows 10 Enterprise Embedded x64 Russian (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with cyrillic/english layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Japanese (O)

Recover

Item no.: 410376-1100-000

Language Package Windows 10 Enterprise Embedded x64 Japanese (O)

Item Number: 410376-1100-000

Language Package Windows 10 Enterprise Embedded x64 Japanese (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with japanese layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Belgian (O)

Recover

Item no.: 410376-1000-000

Language Package Windows 10 Enterprise Embedded x64 Belgian (O)

Item Number: 410376-1000-000

Language Package Windows 10 Enterprise Embedded x64 Belgian (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with belgian layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Polish (O)

Recover

Item no.: 410376-0900-000

Language Package Windows 10 Enterprise Embedded x64 Polish (O)

Item Number: 410376-0900-000

Language Package Windows 10 Enterprise Embedded x64 Polish (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with polish layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Dutch (O)

Recover

Item no.: 410376-0800-000

Language Package Windows 10 Enterprise Embedded x64 Dutch (O)

Item Number: 410376-0800-000

Language Package Windows 10 Enterprise Embedded x64 Dutch (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with dutch layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Spanish (O)

Recover

Item no.: 410376-0700-000

Language Package Windows 10 Enterprise Embedded x64 Spanish (O)

Item Number: 410376-0700-000

Language Package Windows 10 Enterprise Embedded x64 Spanish (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with spanish layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Swedish (O)

Recover

Item no.: 410376-0600-000

Language Package Windows 10 Enterprise Embedded x64 Swedish (O)

Item Number: 410376-0600-000

Language Package Windows 10 Enterprise Embedded x64 Swedish (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with swedish layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 Italian (O)

Recover

Item no.: 410376-0500-000

Language Package Windows 10 Enterprise Embedded x64 Italian (O)

Item Number: 410376-0500-000

Language Package Windows 10 Enterprise Embedded x64 Italian (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with italian layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 French (O)

Recover

Item no.: 410376-0400-000

Language Package Windows 10 Enterprise Embedded x64 French (O)

Item Number: 410376-0400-000

Language Package Windows 10 Enterprise Embedded x64 French (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with french layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 English GB (O)

Recover

Item no.: 410376-0300-000

Language Package Windows 10 Enterprise Embedded x64 English GB (O)

Item Number: 410376-0300-000

Language Package Windows 10 Enterprise Embedded x64 English GB (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with english (GB) layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 English US (O)

Recover

Item no.: 410376-0200-000

Language Package Windows 10 Enterprise Embedded x64 English US (O)

Item Number: 410376-0200-000

Language Package Windows 10 Enterprise Embedded x64 English US (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with english (US) layout

Item has been added to the configuration

Language Package Windows 10 Enterprise Embedded x64 German (O)

Recover

Item no.: 410376-0100-000

Language Package Windows 10 Enterprise Embedded x64 German (O)

Item Number: 410376-0100-000

Language Package Windows 10 Enterprise Embedded x64 German (O) - Windows 10 IoT Enterprise 2015 LTSB Embedded x64 operating system - Keyboard with german layout

Item has been added to the configuration

Adapter USB - 4x RS232 EX-1334V (O)

Recover

Item no.: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O)

Item Number: 410361-1000-000

Adapter USB - 4x RS232 EX-1334V (O) with power supply via USB Bus. Interfaces: 1x USB, 4x RS232 Inclusive USB connecting cable, 2m

Item has been added to the configuration

USB 3.0 Card PCIe EX-11094 (O)

Recover

Item no.: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O)

Item Number: 410358-0400-000

USB 3.0 Card PCIe EX-11094 (O) - PCIe x1 USB 3.0 Interface EX-11094 - compatibel with PCIe x1, x4, x8 and x16 slots - Single Chip Controller with 4x USB 3.0 connectors - max. data transfer rate 1 x 5 Gbit/s - compatible to USB 1.1, 2.0 und 3.0 - incl. SATA power cable and Molex power cable

Item has been added to the configuration

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Recover

Item no.: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O)

Item Number: 410350-3800-000

Monitor TFT 37.5" HP Z38c (95 cm) (O) Visible diagonal: 95 cm, 21:9 curved Maximum resolution: 3840 x 1600 pixel @ 60 Hz Brightness: 300 cd/m² Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 2.0 Data connectors: 1 x USB Type C (upstream), 3 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 195 W, Typical 80 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 55.9 cm x 89.6 cm x 24.8 cm Weight incl. stand: 13.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 12 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Recover

Item no.: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O)

Item Number: 410350-3204-000

Monitor TFT 32" HP Z32k G3 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 Pixel @ 60 Hz Brightness: 400 cd/m² Contrast: 2000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0, Thunderbolt 4.0 Data connectors: 1 x USB Type-C 5Gbps, 4 x SuperSpeed USB Type-A 5Gbps, 1 x Ethernet RJ45 1Mbps Power consumption: Maximum 180 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 60.49 cm x 71.35 cm x 21.7 cm Weight incl. stand: 9 kg Ergonomic features: Tilt: -5° to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, TÜV, FCC Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Recover

Item no.: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O)

Item Number: 410350-3202-000

Monitor TFT 31,5" EIZO EV3285 (80 cm) (O) Visible diagonal: 80 cm, 16:9 Maximum resolution: 3840 x 2160 pixel Brightness: 350 cd/m² Contrast: 1300:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.3, 2 x HDMI 2.2 Data connectors: 1 x USB Type C (upstream), 2 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 163 W, Typical 33 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 57.6 cm x 71.7 cm x 23 cm Weight incl. stand: 11 kg Ergonomic features: Tilt: -5°to +35°, Swivel: 344°, Height adjustable 14.9 cm, Pivot rotation: not available Certification and compliance: CE, CB, TÜV, FCC, TCO Operating voltage: 100-120 V / 220-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Recover

Item no.: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O)

Item Number: 410350-2703-000

Monitor TFT 27" HP E27u G4 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 250 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type C (upstream), 4 x SuperSpeed USB Type-A 5 Gbps Power consumption: Maximum 138 W, Typical 30 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.6 cm x 61.3 cm x 21,6 cm Weight incl. stand: 7.6 kg Ergonomic features:Tilt: -5° to +23°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Recover

Item no.: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O)

Item Number: 410350-2702-000

Monitor TFT 27" HP Z27q G3 (68 cm) (O) Visible diagonal: 68 cm, 16:9 Maximum resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.4, HDMI 2.0 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 69 W, Typical 35 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 53.0 cm x 61.2 cm x 20.5 cm Weight incl. stand: 5.8 kg Ergonomic features: Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Recover

Item no.: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O)

Item Number: 410350-2701-000

Monitor TFT 27" HP Z27n G2 (68 cm) (O) Visible diagonal: 68.58 cm, 16:9 Max. resolution: 2560 x 1440 pixel @ 60 Hz Brightness: 350 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 2.0 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 96 W, Typical 45 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.9 cm x 61.3 cm x 21.4 cm Weight: 8 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Recover

Item no.: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Item Number: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Recover

Item no.: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Item Number: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Recover

Item no.: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O)

Item Number: 410331-2800-000

Graphics Card NVIDIA RTX A4000 16 GB DP (O) Professional graphics card for Microscopy Workstation - 16 GB GDDR6 memory - PCI Express 4.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x DisplayPort 1.4a (DP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA T1000 8 GB mDP (O)

Recover

Item no.: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O)

Item Number: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Recover

Item no.: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O)

Item Number: 410331-2500-000

Graphics Card NVIDIA Quadro P1000 4 GB mDP (O) Professional graphics card for Microscopy Workstation - 4 GB GDDR5 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12, OpenGL 4.5 and CUDA - Support for up to four displays - Display outputs:4 x Mini DisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Recover

Item no.: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O)

Item Number: 410331-2300-000

Graphics Card NVIDIA Quadro RTX4000 8 GB DP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express® 3.0 Interface x16 - Hardware acceleration of DirectX® 12, OpenGL® 4.6 and CUDA - Support for up to four displays - Display outputs:3 x DisplayPort 1.4 (DP) - DisplayPort support for 3 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Recover

Item no.: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9)

Item Number: 410323-8000-000

Hard disk drive 8 TB 7200 RPM SATA, additional (HP Z2 G5/G9) - maximum count per workstation: 1 - for Microscopy Workstation Compact HP Z2 (G5 and G9)

Item has been added to the configuration

SSD 2 TB M.2 NVMe, additional (O)

Recover

Item no.: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O)

Item Number: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O) - data storage with high performance for data handling with high bandwidth requirement - maximum count per workstation: 1; 2nd SATA harddisk 8 TB required - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 64 GB module - DDR4 2933 MHz ECC registered DIMM - can be extended to 128 GB (2 x 410303-6400-000), 256 GB (4 x 410303-6400-000) or 384 GB (6 x 410303-6400-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Recover

Item no.: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Item Number: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Recover

Item no.: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Item Number: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Recover

Item no.: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O)

Item Number: 410220-0300-000

Processor Intel Core i9-10900K (HP Z2 G5) (O) High performance processor configuration - Intel Core i9-10900K (3.7 GHz 20 MB cache 10 cores 20 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Recover

Item no.: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O)

Item Number: 410220-0100-000

Processor Intel Core i5-10600 (HP Z2 G5) (O) Default processor configuration - Intel Core i5-10600 (3.3 GHz 12 MB cache 6 cores 12 threads) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 (O)

Recover

Item no.: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O)

Item Number: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G5 (O)

Recover

Item no.: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O)

Item Number: 410201-9912-000

Microscopy Workstation Compact HP Z2 G5 (O) - HP Z2 Tower G5 Workstation - Chipset: Intel W480 - Memory Expansion Slots: 4 x DDR4-RAM modules, 3200 MHz non-ECC - Memory: max. 128 GB RAM - PCI Express Connectors: 1 x PCI Express Generation 3 x16 1 x PCI Express Generation 3 x4 2 x PCI Express Generation 3 x1 - Graphics card onboard: Intel UHD Graphics 630 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Optical Storage: DVD +/- RW recorder for rewriteable media - Network Controller: 1 x GbE LAN interface (RJ 45) - I/O: 2 x Type-A SuperSpeed USB 5 Gbps, 2 x Type-A SuperSpeed USB 10 Gbps (front), 2 x Hi-Speed USB 480 Mbps, 2 x Type-A SuperSpeed USB 10 Gbps, 2 x Type-A SuperSpeed USB 5 Gbps (rear) - Certifications <(>&<)> Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply: 700W wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-6400-000

Memory 64 GB (2x32) DDR4-3200 (HP Z2 G5) (O) consisting of 2 x 32 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 128 GB (2 x 410201-6400-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Recover

Item no.: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O)

Item Number: 410201-1605-000

Memory 16 GB (1x16) DDR4-3200 (HP Z2 G5) (O) consisting of 1 x 16 GB modules - DDR4 3200 MHz nonECC unbuffered DIMM - can be extended to 32 GB (2 x 410201-1605-000) - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Item has been added to the configuration

System Configuration 5d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O)

Item Number: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 800, LSM 800 MPLX Upgr., LSM 900, LSM 980, Elyra 7, Celldiscoverer 7, Axioscan 7, Lattice Lightsheet 7 and Widefield Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 4d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O)

Item Number: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for Lightsheet Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 3d for Z6 G4 (O)

Recover

Item no.: 000000-2561-499

System Configuration 3d for Z6 G4 (O)

Item Number: 000000-2561-499

System Configuration 3d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 700, LSM 780, LSM 880 and Elyra Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 1d for Z6 G4 (O)

Recover

Item no.: 000000-2548-757

System Configuration 1d for Z6 G4 (O)

Item Number: 000000-2548-757

System Configuration 1d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Without ZEN Software Installation - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

ystem Configuration 3 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-755

ystem Configuration 3 for HP Z2 G9 (O)

Item Number: 000000-2548-755

System Configuration 3 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 700 Systems - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 2 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O)

Item Number: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 1 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O)

Item Number: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System configuration 1 for HP Z2 G5 (O)

Recover

Item no.: 000000-2443-717

System configuration 1 for HP Z2 G5 (O)

Item Number: 000000-2443-717

System configuration 1 for HP Z2 G5 (O) Installation of Windows 10 Enterprise LTSC 2019 x64 incl. Windows 10 license Without ZEN software installation - only for 410201-9912-000 Microscopy Workstation Compact HP Z2 G5

Software for image processing (203)

arivis SMA

Item has been added to the configuration

arivis Pro SMA, Entry Fee - ACA

Recover

Item no.: 410158-9001-101

arivis Pro SMA, Entry Fee - ACA

Item Number: 410158-9001-101

arivis Pro SMA, Entry Fee - ACA Flat entry fee for SMA for arivis Pro that needs to be paid after 8 months or more without an SMA. Purchase of a valid SMA for arivis Pro together with the Entry Fee is required. This entry fee allows to catch up on former software releases. It can be waved off if 3 years of SMA are ordered upfront

Item has been added to the configuration

arivis Pro SMA, local and floating - ACA

Recover

Item no.: 410158-2001-101

arivis Pro SMA, local and floating - ACA

Item Number: 410158-2001-101

arivis Pro SMA, local and floating - ACA The Software Maintenance Agreement for local and floating arivis Pro licenses covers all arivis Pro modules including VR and SIS Converter Pro for one year. Maintenance for SIS converter Pro included. SMA required for new permanent licenses. The SMA includes customer support and software updates for the duration of the maintenance agreement. In general, two main software updates per year that cover bug fixes and adds functionality to the purchased arivis Pro modules and the SIS Converter Pro. It includes access to support portal and ticketing system via https://kb.arivis.com/

Item has been added to the configuration

ZEISS arivis Cloud 1 year Industry

Recover

Item no.: 410145-3035-100

ZEISS arivis Cloud 1 year Industry

Item Number: 410145-3035-100

ZEISS arivis Cloud 1 year Industry The arivis Cloud Industry License is valid for one year, includes 1 arivis Cloud account and is restricted to industry customers. It contains: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

Item has been added to the configuration

arivis Cloud 1 year Academia

Recover

Item no.: 410145-3034-100

arivis Cloud 1 year Academia

Item Number: 410145-3034-100

arivis Cloud 1 year Academia The arivis Cloud Academia License is valid for one year, includes 2 arivis Cloud accounts and is restricted to academic customers. The 2 accounts contain: - Full access to Deep Learning Toolset - Access to pre-built applications - 1 TB storage - Up to 7000 min of computing time per month (incl. GPU) - On-going priority expert support - Continuous and included access to newest features and improvements - Access to training materials

arivis Software

Item has been added to the configuration

arivis Pro Convert local license to floating - ACA

Recover

Item no.: 410158-8001-101

arivis Pro Convert local license to floating - ACA

Item Number: 410158-8001-101

arivis Pro Convert local license to floating - ACA convert a local license to a floating license to give access to the license in a network environment to multiple users. 1 concurrent user

Item has been added to the configuration

arivis Pro VR Convert local to floating - ACA

Recover

Item no.: 410156-8001-101

arivis Pro VR Convert local to floating - ACA

Item Number: 410156-8001-101

arivis Pro VR Convert local to floating - ACA convert a local license of arivis Pro VR to a floating license, 1 concurrent user

Item has been added to the configuration

arivis Pro VR Visualization Module, local - ACA

Recover

Item no.: 410156-0012-101

arivis Pro VR Visualization Module, local - ACA

Item Number: 410156-0012-101

arivis Pro VR Visualization Module, local - ACA 3D visualization software for immersive image data visualization of raw voxel data. Permanent license. Extract data and structural relationships not accessible by standard 2D or 3D viewing applications.View real image data, in direct volume rendering, without the need to convert them to a surface object. Experience your images in an assimilated physical representation. Simply load your image data and use the 3D tracked Meta headsets and touch controllers to look at your image from any possible angle. Use your hands to scale the image and travel through it to investigate intricate details. An intuitive menu system allows to change opacity settings as well as save and reload points of interest. Direct Volume Rendering (visualization of intensity data) in Virtual Reality, 3D Maximum Intensity Rendering in Virtual Reality, Sphere cloud rendering of 3D voxel data, Color mapping and opacity Control. Support for Meta Rift, Rift S, and Quest (tether mode only)VR headset, Meta Touch VR Controller support, Free rotational, translational, and scalable interaction with image data, and free positioning (inclination, height) of a clipping plane, Advanced clipping tools (plane, spherical clipping), Various screenshot and video export options (High resolution, 360°, ...) Dynamic down-sampling for data larger than GPU memory.

Item has been added to the configuration

arivis Pro VR Tracking Module, local - ACA

Recover

Item no.: 410156-0011-101

arivis Pro VR Tracking Module, local - ACA

Item Number: 410156-0011-101

arivis Pro VR Tracking Module, local - ACA Visualization of 3D over time tracks in Virtual Reality, VR Tracking tools to edit existing tracks (Split, Merge), Manual creation of elaborate tracks without the need of prior segmentation. Automatic Tracking requires a license of arivis arivis Pro Tracking <(>&<)> Lineage. Requires arivis Pro VR Visualization Module

Item has been added to the configuration

arivis Pro VR Measure Module, local - ACA

Recover

Item no.: 410156-0010-101

arivis Pro VR Measure Module, local - ACA

Item Number: 410156-0010-101

arivis Pro VR Measure Module, local - ACA This Module allows for interactive measurements of distances in 3D (2- point, multi-point, angle). Manual counting and classification in Virtual Reality Registration Tool for fusion of two 3D volumes using VR based on interactive surface transform. VR Visualization Module is required.

Item has been added to the configuration

arivis Pro VR Collaboration Module,additional user - ACA

Recover

Item no.: 410156-0009-101

arivis Pro VR Collaboration Module,additional user - ACA

Item Number: 410156-0009-101

arivis Pro VR Collaboration Module,additional user - ACA Additional user accounts for collaboration modules. Individual logins. Users can participate in session but not edit objects.

Item has been added to the configuration

arivis Pro VR Collaboration Module, local - ACA

Recover

Item no.: 410156-0008-101

arivis Pro VR Collaboration Module, local - ACA

Item Number: 410156-0008-101

arivis Pro VR Collaboration Module, local - ACA Share presentation of 3D images with own VR toolset. Join a session with up to 30 interacting users in VR space. Use presenter tools in collaborative sessions (pointer, highlighter, clipping, ROI). Voice-Chat with positional audio or any web meeting services (i.e MS teams, Skype, GoToMeeting, Cisco Webex, etc.). Easy, custom defined access of the data set to be viewed. Interactive participation without VR hardware. Allows loading of arbitrary ROIs in native resolution. Includes user login and access for one presenter and one collaborator.

Item has been added to the configuration

arivis Pro VR Analysis Module, local - ACA

Recover

Item no.: 410156-0007-101

arivis Pro VR Analysis Module, local - ACA

Item Number: 410156-0007-101

arivis Pro VR Analysis Module, local - ACA Import and displaying of segmentation results from arivis Pro, De-novo creation of segments (manual, intensity based, opacity based), Manual editing of segments (add, dilate, smoothen, cut, merge, delete), Sculpting brush tool to interface segment editing process, Semi- automatic magic wand segmentation tool, VR displaying of selectable segment calculations (i.e. volume, surface area,). A license of arivis Pro Visualization and Analysis Package is recommended.

Item has been added to the configuration

arivis Pro Module Neuron Tracing - ACA

Recover

Item no.: 410156-0006-101

arivis Pro Module Neuron Tracing - ACA

Item Number: 410156-0006-101

arivis Pro Module Neuron Tracing - ACA Quantification of neuronal filamentous structures The Neuron Tracing module allows you to automatically trace neurites or other filamentous neuronal structures. It offers two algorithms to choose from: The automatic reconstruction of the neurons is either threshold-based or probability-based. You can start both tracing algorithms from a cell body or directly on neuron structures without visible cell bodies. Both are ideally suited for fluorescence imaging. Semi-automated tools are available for manual trace editing in 2D and 3D. This allows you to manually change trace structures quickly and efficiently. You can view and export statistical measurements such as overall length, volume, number of branches and endpoints, branch levels and depths, and section diameters and many more.

Item has been added to the configuration

arivis Pro Module Volume Fusion - ACA

Recover

Item no.: 410156-0005-101

arivis Pro Module Volume Fusion - ACA

Item Number: 410156-0005-101

arivis Pro Module Volume Fusion - ACA Fusion of two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Ideal for multi-view image reconstruction. Volumes can be adjusted and aligned based on a surface representation or via landmarks, optionally each volume can be put in its own channel.

Item has been added to the configuration

arivis Pro Module Exchange Objects - ACA

Recover

Item no.: 410156-0004-101

arivis Pro Module Exchange Objects - ACA

Item Number: 410156-0004-101

arivis Pro Module Exchange Objects - ACA This software module allows the import of binary mask and labeled images which are the result of segmentation functions in other programs, as 3D- objects into arivis Pro. These can then be used for 3D evaluationor within your 3D / 4D image analysis pipeline. This function is very suitable to transfer ZEN Intellesis segmentation results for 3D image analysis in arivis Pro.

Item has been added to the configuration

arivis Pro Module Batch Analysis - ACA

Recover

Item no.: 410156-0003-101

arivis Pro Module Batch Analysis - ACA

Item Number: 410156-0003-101

arivis Pro Module Batch Analysis - ACA Software module for arivis Pro which allows batch analysis of many images with the same pipeline

Item has been added to the configuration

arivis Pro Module Tracking and Lineage - ACA

Recover

Item no.: 410156-0002-101

arivis Pro Module Tracking and Lineage - ACA

Item Number: 410156-0002-101

arivis Pro Module Tracking and Lineage - ACA The tracking module allows analysis of the movement of small (i.e. particle tracking) or large objects (e.g. nuclei, cells, organisms) over time, providing quantitative information on movement, tracks, cell division and object properties over the time series. By identifying structures in 3D over time one can see live cell dynamics and quantitatively compare and quantify various parameters in living cells. A large variety of measurement parameters are available for tracking and lineage experiments

Item has been added to the configuration

Extension of the arivis Pro TL license by one year - ACA

Recover

Item no.: 410155-3101-101

Extension of the arivis Pro TL license by one year - ACA

Item Number: 410155-3101-101

Extension of the arivis Pro TL license by one year - ACA The duration of arivis Pro TL license (time limited for 1 year) included in the ZEN Desk and arivis Pro TL package can be extended on a yearly basis. Multiple years can be provided. This yearly fee also includes access to customer support and software updates. This part can only be purchased together with a ZEN Desk and arivis Pro TL package and is only available for Academia customers. Maximum extension up to 5 years

Item has been added to the configuration

arivis Hub POC Environment licensing, subscription 3 months - IND

Recover

Item no.: 410155-3003-102

arivis Hub POC Environment licensing, subscription 3 months - IND

Item Number: 410155-3003-102

arivis Hub POC Environment licensing, subscription 3 months - IND Licensing for POC (Proof -Of-Concept) arivis Hub environment on a workstation or in the cloud, configured identically to the purchased production environment. Limited to 3-months. For deployment in customers environment installation and configuration is charged separately (arivis Hub Implementation and configuration, per day).

Item has been added to the configuration

arivis Pro TL license for 1 year - ACA

Recover

Item no.: 410155-3001-101

arivis Pro TL license for 1 year - ACA

Item Number: 410155-3001-101

arivis Pro TL license for 1 year - ACA The arivis pro (TL) package is only allowed to be sold together with a new microscopy system and a ZEN desk license. This arivis pro (TL) temporary license is valid for one years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact: support-zeiss@arivis.com) with regular SW updates. After 1 year this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time

Item has been added to the configuration

arivis SIS Converter Pro

Recover

Item no.: 410155-0004-101

arivis SIS Converter Pro

Item Number: 410155-0004-101

arivis SIS Converter Pro Stand alone arivis SIS File Converter - including Watchdog functionality; Fast, automatic and unattended file conversion process from image acquisition to SIS format; - Multiple configurable import sources for file conversion

Item has been added to the configuration

arivis Pro for 3D Visualization and Data Analysis -ACA

Recover

Item no.: 410155-0001-101

arivis Pro for 3D Visualization and Data Analysis -ACA

Item Number: 410155-0001-101

arivis Pro for 3D Visualization and Data Analysis -ACA Software package for 3D visualization and analysis of multi-dimensional image data sets which have been created by 3D imaging systems such as LSM, ApoTome, Spinning Disk, Widefield Deconvolution, Lightsheet and, Electron Microscopes and others. The software features extraordinary performance in handling really large data sets up to multiple terabytes while allowing fully interactive visualization. This package includes tools for: 3D object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), Machine Learning for object segmentation and classification and other advance segmentation tools. It also includes tools for advanced analysis (quantification of object relationships, distances, overlapping regions) per cell or per compartment analysis. Furthermore, this package includes stitching tools and many pre-processing tools for image enhancement. The software can be extended with various modules for advanced image analysis

Item has been added to the configuration

Special arivis Pro SW package for Volutome, 1 year

Recover

Item no.: 410154-3008-100

Special arivis Pro SW package for Volutome, 1 year

Item Number: 410154-3008-100

Special arivis Pro SW package for Volutome, 1 year Special arivis SW package for Volutome - includes a 1 year license of arivis Pro, arivis AI toolkit for 1 year, and a 3 hour web Training For academia Volutome customers only.

Item has been added to the configuration

arivis Pro APAC Package Visualization, 3D Analysis -ACA

Recover

Item no.: 410154-3003-101

arivis Pro APAC Package Visualization, 3D Analysis -ACA

Item Number: 410154-3003-101

arivis Pro APAC Package Visualization, 3D Analysis -ACA This special arivis Pro package is valid for two years and includes the following items: - arivis Pro for 3D Visualization and Data Analysis - arivis Pro Module Tracking - arivis Pro Module Exchange Objects - arivis Pro initial WEB based training The package encompasses a reduced transfer price: - Only for APAC SSCs: China, Japan, South Korea, India, ANZ and SEA - starts from Oct 1st, 2021 - mandatory for new Elyra 7, Lightsheet, and Lattice Lightsheet 7 - cannot be ordered for other systems - has a limited 2 years license - only valid for Academia customers

Item has been added to the configuration

Special arivis Pro SW package for Volutome

Recover

Item no.: 410154-0008-100

Special arivis Pro SW package for Volutome

Item Number: 410154-0008-100

Special arivis Pro SW package for Volutome This package includes: 1 arivis Pro for 3D Visualization and Data Analysis - ACA permanent license 1 arivis AI Toolkit Academia: Cloud/local DL Trainer - ACA license 1 arivis Pro SMA, local – ACA (Software Maintenance contract for 1 year) This part is only available for customers who had a license for the Special arivis Pro SW package for Volutome , 1 year For academia Volutome customers only.

Item has been added to the configuration

arivis AI Package Academia: Cloud/local DL Trainer - ACA

Recover

Item no.: 410154-0005-101

arivis AI Package Academia: Cloud/local DL Trainer - ACA

Item Number: 410154-0005-101

arivis AI Package Academia: Cloud/local DL Trainer - ACA This arivis AI Package offers the choice of cloud-based and local computing as required for individual use cases and setups. It consists of 2 parts and is only valid for Academia customers. 1. The arivis Cloud license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning tools (arivis AI) as well as to pre-built applications for 2 users. It enables customers to train robust AI models for imagesegmentation via powerful neural networks with more than 6 million parameters. Deep Learning Training in the cloud frees up local computing capacities. Using this state-of-the- art technology allows more efficient workflows and best performance for variousimage analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN or in the cloud. 2. In addition, the package includes an arivis Pro AI Deep Learning local training Module. It allows users to locally train Deep Learning (DL) models on their workstations This is a permanent license and requires an up-to date arivis Pro license. This combination enables customers to use the locally and/or cloud trained Deep Learning models as part of their arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analysis tools (quantification of object relationships, distances). Both partsare applicable onimage data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images.

Item has been added to the configuration

arivis Pro Analysis Big Package + VR, local - ACA

Recover

Item no.: 410154-0001-101

arivis Pro Analysis Big Package + VR, local - ACA

Item Number: 410154-0001-101

arivis Pro Analysis Big Package + VR, local - ACA Contains a big package of V4D for Academia as a permanent license. It includes the following modules: arivis Pro for 3D Visualization and Data Analysis arivis Pro Module Tracking arivis Pro Module Exchange Objects arivis Pro Module Batch Analysis arivis Pro Module Volume Fusion arivis SIS Converter Pro The Neuron Tracing module is not included. It also includes a complementary license of arivis Pro VR Visualization and Measure

Item has been added to the configuration

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Recover

Item no.: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND

Item Number: 410135-0053-390

ZEN desk 3.9 and arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

arivis Subscription

Item has been added to the configuration

arivis Hub LDAP/AD, annual subscription - ACA

Recover

Item no.: 410156-5018-101

arivis Hub LDAP/AD, annual subscription - ACA

Item Number: 410156-5018-101

arivis Hub LDAP/AD, annual subscription - ACA The arivis Hub LDAP/AD package is a user management upgrade to the Basic Analysis Package and allows for the connection to an LDAP systems or other active directory. Annual subscription

Item has been added to the configuration

arivis Pro VR annual subscription Pack, floating - IND

Recover

Item no.: 410156-2001-102

arivis Pro VR annual subscription Pack, floating - IND

Item Number: 410156-2001-102

arivis Pro VR annual subscription Pack, floating - IND This package provides an annual subscription for all VR Modules including Visualization,Measure, Analysis, Tracking Collaboration + 1 additional User. This package can be installed as a floating license.

Item has been added to the configuration

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND

Recover

Item no.: 410156-0023-102

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND

Item Number: 410156-0023-102

arivis Hub CPU Core Pack (16 cores), 1 year subscription - IND arivis Hub module for completing analysis jobs and workflows. Enables 16 CPU cores each. The number of CPU Core Packs determines the maximum number of parallel analysis processes. Annual subscription.

Item has been added to the configuration

arivis Hub Additional user,subscription - IND

Recover

Item no.: 410156-0022-102

arivis Hub Additional user,subscription - IND

Item Number: 410156-0022-102

arivis Hub Additional user,subscription - IND Provides an additional concurrent, named user for the arivis Hub. Annual subscription

Item has been added to the configuration

arivis VisionHub - Image and Data Watcher, annual subscription

Recover

Item no.: 410156-0021-102

arivis VisionHub - Image and Data Watcher, annual subscription

Item Number: 410156-0021-102

arivis VisionHub - Image and Data Watcher, annual subscription arivis VisionHub module for watching files for automatic registration and workflow analysis.

Item has been added to the configuration

arivis Hub User Mgmt Enterprise, subscription - IND

Recover

Item no.: 410156-0020-102

arivis Hub User Mgmt Enterprise, subscription - IND

Item Number: 410156-0020-102

arivis Hub User Mgmt Enterprise, subscription - IND The User Management Module Enterprise Package includes the capacity for up to 250 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub User Management Advanced subscription - IND

Recover

Item no.: 410156-0019-102

arivis Hub User Management Advanced subscription - IND

Item Number: 410156-0019-102

arivis Hub User Management Advanced subscription - IND The User Management Module Advanced Package includes the capacity for up to 100 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub User Management Basic, subscription - IND

Recover

Item no.: 410156-0017-102

arivis Hub User Management Basic, subscription - IND

Item Number: 410156-0017-102

arivis Hub User Management Basic, subscription - IND The User Management Module Basic includes the capacity for up to 25 concurrent, named users and can be connected to an LDAP or active directory server. Annual subscription

Item has been added to the configuration

arivis Hub 3D Stream Pack (2 streams), subscription - IND

Recover

Item no.: 410156-0016-102

arivis Hub 3D Stream Pack (2 streams), subscription - IND

Item Number: 410156-0016-102

arivis Hub 3D Stream Pack (2 streams), subscription - IND Additional parallel streams for server-based 3D rendering of volume and object data. One 3D Stream Package allows for 2 additional simultaneous 3D render streams. Appropriate GPU performance needs to be provided by customer. GPUs can be shared by multiple streams (splitting performance and memory). Annual subscription

Item has been added to the configuration

arivis Hub HCA Module, subscription - IND

Recover

Item no.: 410156-0015-102

arivis Hub HCA Module, subscription - IND

Item Number: 410156-0015-102

arivis Hub HCA Module, subscription - IND arivis Hub module for visualizing well-plate data in well format and heatmap view of results over well plate for workflow runs. Requires Workflow Execution Module Annual subscription

Item has been added to the configuration

arivis Hub Workflow Execution, subscription - IND

Recover

Item no.: 410156-0014-102

arivis Hub Workflow Execution, subscription - IND

Item Number: 410156-0014-102

arivis Hub Workflow Execution, subscription - IND arivis Hub module dedicated to running and archiving image analysis pipelines created with arivis Pro. This module includes tools for: management of pipelines, running pipelines on selected images, scheduling image analysis jobs, visualizing objects and results of executed analysis jobs, exporting objects and results, access to extracted numerical results. This module includes 1 CPU Core Pack to support 1x16 cores for image processing and 1x arivis Pro full annual subscription license (all modules, floating) as well as 2x SIS Converter Pro floating licenses. Annual subscription

Item has been added to the configuration

arivis Hub 3D Visualization Pack subscription - IND

Recover

Item no.: 410156-0013-102

arivis Hub 3D Visualization Pack subscription - IND

Item Number: 410156-0013-102

arivis Hub 3D Visualization Pack subscription - IND Server-based 3D rendering capabilities for both volume data The arivis Hub 3D Visualization Module includes 1x 3D Stream Package to support 2 parallel streams. Annual subscription

Item has been added to the configuration

arivis Pro floating addon for arivis Hub subscription - ACA

Recover

Item no.: 410155-5005-101

arivis Pro floating addon for arivis Hub subscription - ACA

Item Number: 410155-5005-101

arivis Pro floating addon for arivis Hub subscription - ACA This yearly subscription package of arivis Pro which can only be offered to customers with an active license of arivis Hub Basic Analysis Package - ACA Up to 10 subscription licences for arivis Pro can be offered to customers with active licenses of arivis Hub Basic Analysis Package per year. This package is for academia customers only and includes one full arivis Pro license including all modules and one arivis AI license package: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This software allows fast and fully interactive visualization and analysis of large data sets up to multiple terabytes of 2D, 3D and 4D dataset. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage ofnuclei, cells). The function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. Thefunction group File Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a fileis created by the microscope. This package includes 2 local File Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore, traces can be edited with manual or semi-automatic easy-to-use tracing trace editing tools 2.This package also includes one arivis AI premium package offering the choice of cloud-based and local deep learning training as required for individual use cases and setups. The arivis AI package consists of two parts: a) The arivis Cloud AI license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications for 1 user.It enables customers to train robust AI models for imagesegmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1TB storage. Using this state-of- the-art technology allowsmore efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. b) In addition, the package includes an arivis Pro AI Deep Learning localtraining module. Itallows users to locally train Deep Learning (DL) models on their workstations. These trained models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence andEM) of various file formats for 2D or 3/4D images. With the flexible floating license users are able to start the application on different workstations. The software can be installed by the customer or by a ZEISS employee. Fromthe time of installation, the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

arivis Hub Server Base Management, subscription - IND

Recover

Item no.: 410155-5002-102

arivis Hub Server Base Management, subscription - IND

Item Number: 410155-5002-102

arivis Hub Server Base Management, subscription - IND arivis Hub Server Base Management system is a server-based software dedicated to image management and data viewing capabilities. Users connected to the server and to the arivis Hub can: - upload anddownload image data, - register natively supported file formats (SIS, CZI, TIFF, OME-TIFF, JPEG) - easily access image data from any device with easy 2D file viewing - create 2D manual annotations such as arrows, text, circles, and polygons - performquick manual 2D measurements such distances and areas Annual subscription. Includes 5 named users

Item has been added to the configuration

arivis Hub Basic Analysis Package, subscription - ACA

Recover

Item no.: 410154-5006-101

arivis Hub Basic Analysis Package, subscription - ACA

Item Number: 410154-5006-101

arivis Hub Basic Analysis Package, subscription - ACA The annual subscription of a arivis Hub -Basic Analysis Package for Academia includes: 1. Server Base Management System 2. User Management for unlimited users restricted to 10 user groups 3. Workflow Execution which includes a subscription license of arivis Pro full package (floating) including all available arivis Pro modules and 1x SIS Converter Pro floating license valid for one year

Item has been added to the configuration

ZEISS arivis Hub Enterprise Package - IND

Recover

Item no.: 410154-2007-102

ZEISS arivis Hub Enterprise Package - IND

Item Number: 410154-2007-102

ZEISS arivis Hub Enterprise Package - IND This package is for industry customers and includes one full arivis Pro license including all modules and one arivis Cloud Premium license and one arivis Hub Package for server-based image processing: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large 2D, 3D and 4D data sets up to multiple terabytes. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre-processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image.Furthermore traces can be edited manually with manual or semi-automatic easy-to-use tracing trace editing tools. The Function Group arivis Pro AI Deep Learning local Training module allows users to locally train Deep Learning (DL) models on their workstations. These trained models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. 2. This package also includes one arivis Cloud Premium license (formerly APEER). The arivis Cloud Premium license is valid for one year and includes full access to the cloud-based Deep Learning tools as well as to pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. With the flexible floating license arivis Pro users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. 3. The arivis Hub package allows running arivis Pro analysis pipelines on a cloud or local server for efficient batch or large scale analysis without the need to copy image data to local work stations. It includes: arivis Hub Server Base Management, subscription- IND arivis Hub Workflow Execution incl. 1 CPU Core Pack arivis Hub User Management Basic 7xCPU Core Packs Hardware and Implementation not included. From the time of installation the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

arivis Pro and AI Package subscription, float – IND

Recover

Item no.: 410154-2004-102

arivis Pro and AI Package subscription, float – IND

Item Number: 410154-2004-102

arivis Pro and AI Package subscription, float – IND This package is for industry customers and includes one full arivis Pro license including all modules and one arivis AI license package: 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large data sets up to multiple terabytes of 2D, 3D and 4D dataset It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore, traces can be edited manually with manual or semi-automatic easy-to-use tracing trace editing tools. 2. This package also includes one arivis AI premium package offering the choice of cloud-based and local deep learning training as required for individual use cases and setups. The arivis AI package consists of two parts: a) The arivis Cloud AI license (formerly APEER) is valid for one year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU & 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in the cloud. b) In addition, the package includes an arivis Pro AI Deep Learning local training module. It allows users to locally train Deep Learning (DL) models on their workstations. These train models can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses (quantification of object relationships, distances). Both parts are applicable on image data derived from various imaging modalities (Brightfield, Fluorescence and EM) of various file formats for 2D or 3/4D images. With the flexible floating license users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. From the time of installation, the SW license is valid for 365 days (subscription model) and can be renewed after that period.

Item has been added to the configuration

ZEISS arivis Pro and AI Enterprise Package - IND

Recover

Item no.: 410154-2002-102

ZEISS arivis Pro and AI Enterprise Package - IND

Item Number: 410154-2002-102

ZEISS arivis Pro and AI Enterprise Package - IND This package is for industry customers and includes two full arivis Pro licenses including all modules and three arivis Cloud Premium licenses for access to arivis AI (local and cloud) 1. The arivis Pro Software license is a full package for visualization and analysis of multi-dimensional image data created by imaging systems. This package is intended for Industry customers only. This software allows fast and fully interactive visualization and analysis of large 2D, 3D and 4D data sets up to multiple terabytes. It allows flexible multidimensional object analysis (volume, area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), machine learning for object segmentation and classification and further application-oriented segmentation tools. Advanced analysis for quantification of object relationships, distances, overlapping regions and per cell or per compartment as well as stitching tools and many pre- processing tools for image enhancement are also included. The Function group Tracking allows analysis of object movements and object properties over time (i.e. particle tracking or tracking and lineage of nuclei, cells). The Function group Exchange Objects allows the import of binary mask and labeled images which are the result of segmentation functions in other programs or open source tools, creating 3D objects from z planes in arivis Pro. These can be integrated into the 4D image analysis pipeline. The Function group Volume Fusion allows to fuse two volumes with different rotation, translation, scaling and resolution to create a new volume for further processing and 3D rendering. Volumes can be adjusted and aligned based on a surface representation or via landmarks. The Function group SIS Converter Pro allows an automatic registration of files and converts them automatically to the SIS format to further process them in arivis Pro. Due to the watchdog functionality this process starts as soon as a file is created by the microscope. This package includes 2 floating SIS Converter Pro licenses. The Function Group Tracing automatically detects and quantifies neural traces in any 2D/3D or 4D image. Furthermore tracescan be edited manually with manual or semi automatic easy-to-use tracing trace editing tools. The Function Group arivis Pro AI Deep Learning local Training module allows users to locally train Deep Learning (DL) models on their workstations. These trainedmodels can be seamlessly used in the arivis Pro pipelines for flexible 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based) and other advanced analyses(quantification of object relationships, distances). 2. This package also includes three arivis Cloud Premium licenses (formerly APEER). These licenses are valid for one year and includes full access to the cloud-based Deep Learning tools as well asto pre-built applications for 1 user. It enables customers to train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. Deep Learning training in the cloud frees up local computing capacities. This premium license for arivis Cloud includes 7000 min GPU <(>&<)> 3*1 TB storage. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks. The trained AI models can be used locally in arivis Pro, ZEN, or in arivis Cloud. With the flexible floating license arivis Pro users are able to start the application on multiple workstations. The software can be installed by the customer or by a ZEISS employee. From the time of installation, the SW licenseis valid for 365 days (subscription model) and can be renewed after that period.

ZEN core SMA

Item has been added to the configuration

SMA Fee ZEN core with Motorized Acquisition 1 year

Recover

Item no.: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year

Item Number: 410139-0165-005

SMA Fee ZEN core with Motorized Acquisition 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Acquisition and all hardware- related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

Item has been added to the configuration

SMA Fee ZEN analyzer 1 year

Recover

Item no.: 410139-0035-000

SMA Fee ZEN analyzer 1 year

Item Number: 410139-0035-000

SMA Fee ZEN analyzer 1 year Entitlement to upgrade ZEN analyzer free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN analyzer. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN analyzer configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band A-B") must be included: - AI Toolkit ("SMA ZEN Band B") - 2D Toolkit ("SMA ZEN Band A") - 3D Toolkit ("SMA ZEN Band A") - Connect Toolkit ("SMA ZEN Band A") - Materials Apps ("SMA ZEN Band A") - TCA Modul ("SMA ZEN Band A") - NMI Modul ("SMA ZEN Band A") - Developer Toolkit ("SMA ZEN Band A") - GxP Toolkit ("SMA ZEN Band A")

Item has been added to the configuration

SMA Fee ZEN core 1 year

Recover

Item no.: 410139-0011-000

SMA Fee ZEN core 1 year

Item Number: 410139-0011-000

SMA Fee ZEN core 1 year Entitlement to upgrade ZEN core free of additional charge on the specified workstation to any software version released during a period of one year. Multiple year coverage is obtained by purchasing multiple quantities of this item. The SMA covers ZEN core, ZEN Motorized Focus Acquisition and all hardware-related modules that are licensed for use on the specified workstation. Selected ZEN Toolkits must be covered by a separate SMA. The Upgrade license will be made available free of charge as soon as a new version of the covered product is released. The price is an annual fee. Note: If the ZEN core configuration includes any of the following ZEN Toolkits, an additional SMA item ("SMA ZEN Band B-C") must be included: - AI Toolkit ("SMA ZEN Band C") - 2D Toolkit ("SMA ZEN Band B") - 3D Toolkit ("SMA ZEN Band B") - Connect Toolkit ("SMA ZEN Band B") - Materials Apps ("SMA ZEN Band B") - TCA Modul ("SMA ZEN Band B") - NMI Modul ("SMA ZEN Band B") - Developer Toolkit ("SMA ZEN Band B") - GxP Toolkit ("SMA ZEN Band B")

ZEN Modules image analysis

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.9

Recover

Item no.: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9

Item Number: 410138-5004-390

Upgrade ZEN band D toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band D toolkits to ZEN 3.8

Recover

Item no.: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8

Item Number: 410138-5004-380

Upgrade ZEN band D toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.9

Recover

Item no.: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9

Item Number: 410138-5003-390

Upgrade ZEN band C toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band C toolkits to ZEN 3.8

Recover

Item no.: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8

Item Number: 410138-5003-380

Upgrade ZEN band C toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.9

Recover

Item no.: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9

Item Number: 410138-5002-390

Upgrade ZEN band B toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band B toolkits to ZEN 3.8

Recover

Item no.: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8

Item Number: 410138-5002-380

Upgrade ZEN band B toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.9

Recover

Item no.: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9

Item Number: 410138-5001-390

Upgrade ZEN band A toolkits to ZEN 3.9 Upgrade of optional ZEN toolkits to ZEN 3.9 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.9 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN band A toolkits to ZEN 3.8

Recover

Item no.: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8

Item Number: 410138-5001-380

Upgrade ZEN band A toolkits to ZEN 3.8 Upgrade of optional ZEN toolkits to ZEN 3.8 in combination with the upgrade of base ZEN upgrade (separate item). Note: Maximum one (the highest applicable) ZEN 3.8 Band A-D Upgrade item is required per ZEN installation.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Recover

Item no.: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License

Item Number: 410138-2104-390

Upgrade ZEN desk to ZEN 3.9 desk Floating License Upgrade of an existing ZEN desk Floating License to ZEN 3.9 desk Floating License Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Recover

Item no.: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic

Item Number: 410138-2104-380

Upgrade ZEN desk FLic to ZEN 3.8 desk FLic Upgrade of an existing ZEN desk Floating License to ZEN 3.8 desk Floating License Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Recover

Item no.: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9

Item Number: 410138-0173-390

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Recover

Item no.: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8

Item Number: 410138-0173-380

Upgrade ZEN with ZEN Motorized Focus to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Focus toolkit Upgrade includes base ZEN, ZEN Motorized Focus toolkit, all hardware- related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Recover

Item no.: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9

Item Number: 410138-0166-390

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Recover

Item no.: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8

Item Number: 410138-0166-380

Upgrade ZEN with ZEN Advanced Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Advanced Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Recover

Item no.: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9

Item Number: 410138-0165-390

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Recover

Item no.: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8

Item Number: 410138-0165-380

Upgrade ZEN with ZEN Motorized Acquisition to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 including ZEN Motorized Acquisition toolkit Upgrade includes base ZEN, ZEN Motorized Acquisition toolkit, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Recover

Item no.: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9

Item Number: 410138-0124-390

Upgrade toolkit for ZEN 3.5 CD7 or earlier to ZEN 3.9 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.9 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or later does not require this item.

Item has been added to the configuration

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Recover

Item no.: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8

Item Number: 410138-0124-380

Upgrade Celldiscoverer modules ZEN 3.5 or earlier to ZEN 3.8 Upgrade of specific features for a Celldiscoverer system in combination with a ZEN upgrade to ZEN 3.8 (a separate item). Note: This upgrade is only required to upgrade ZEN Celldiscoverer 3.5 or earlier. Upgrading ZEN 3.6 or newer does not require this item.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.9 desk

Recover

Item no.: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk

Item Number: 410138-0104-390

Upgrade ZEN desk to ZEN 3.9 desk Upgrade of an existing ZEN desk software to ZEN 3.9 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.8 desk

Recover

Item no.: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk

Item Number: 410138-0104-380

Upgrade ZEN desk to ZEN 3.8 desk Upgrade of an existing ZEN desk software to ZEN 3.8 desk Upgrade includes base ZEN desk and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN modules, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.9

Recover

Item no.: 410138-0102-390

Upgrade ZEN to ZEN 3.9

Item Number: 410138-0102-390

Upgrade ZEN to ZEN 3.9 Upgrade of an existing ZEN software to ZEN 3.9 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.9 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Item has been added to the configuration

Upgrade ZEN to ZEN 3.8

Recover

Item no.: 410138-0102-380

Upgrade ZEN to ZEN 3.8

Item Number: 410138-0102-380

Upgrade ZEN to ZEN 3.8 Upgrade of an existing ZEN software to ZEN 3.8 Upgrade includes base ZEN, all hardware-related modules and some of the optional ZEN toolkits. Note: if the upgraded installation includes any of the following ZEN toolkits, an additional upgrade item (ZEN 3.8 Band A-D) must be included: 2D Toolkit, 3D Toolkit, AI Toolkit, Connect Toolkit, Developer Toolkit, GxP Toolkit, Molecular Quantification Toolkit, Deconvolution Toolkit.

Image processing 3rd Party SW

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9 Floating License

Recover

Item no.: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License

Item Number: 410138-2135-390

Upgrade to ZEN analyzer 3.9 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.9 Floating License Note: The upgrade consists only of the ZEN analyzer 3.9 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8 Floating License

Recover

Item no.: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License

Item Number: 410138-2135-380

Upgrade to ZEN analyzer 3.8 Floating License Upgrade of an existing ZEN analyzer Floating software version to ZEN analyzer 3.8 Floating License Note: The upgrade consists only of the ZEN analyzer 3.8 Floating base license. If the current ZEN analyzer Floating version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9 with Motorized Acquisition

Recover

Item no.: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition

Item Number: 410138-0165-395

Upgrade to ZEN core 3.9 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.9 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8 with Motorized Acquisition

Recover

Item no.: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition

Item Number: 410138-0165-385

Upgrade to ZEN core 3.8 with Motorized Acquisition Upgrade of an existing ZEN core software version to ZEN core 3.8 with existing Motorized Acquisition Toolkit Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and Motorized Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.9

Recover

Item no.: 410138-0135-390

Upgrade to ZEN analyzer 3.9

Item Number: 410138-0135-390

Upgrade to ZEN analyzer 3.9 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.9 Note: The upgrade consists only of the ZEN analyzer 3.9 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band A-B) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN analyzer 3.8

Recover

Item no.: 410138-0135-380

Upgrade to ZEN analyzer 3.8

Item Number: 410138-0135-380

Upgrade to ZEN analyzer 3.8 Upgrade of an existing ZEN analyzer software version to ZEN analyzer 3.8 Note: The upgrade consists only of the ZEN analyzer 3.8 base license. If the current ZEN analyzer version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.9

Recover

Item no.: 410138-0111-390

Upgrade to ZEN core 3.9

Item Number: 410138-0111-390

Upgrade to ZEN core 3.9 Upgrade of an existing ZEN core software version to ZEN core 3.9 Note: The package consists of the ZEN core 3.9 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.9 Band B-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Upgrade to ZEN core 3.8

Recover

Item no.: 410138-0111-380

Upgrade to ZEN core 3.8

Item Number: 410138-0111-380

Upgrade to ZEN core 3.8 Upgrade of an existing ZEN core software version to ZEN core 3.8 Note: The package consists of the ZEN core 3.8 base license and upgrades for an existing Base Acquisition Toolkit and/or Motorized Focus Acquisition Toolkit. If the current ZEN core version includes any of the following ZEN toolkits/modules, an additional upgrade item (ZEN 3.8 Band A-C) must be added: - 2D Toolkit - 3D Toolkit - AI Toolkit - Connect Toolkit - Materials Apps - TCA Module - NMI Module - Developer Toolkit - GxP Toolkit

Item has been added to the configuration

Transfer ZEN to ZEN core 3.9

Recover

Item no.: 410138-0011-390

Transfer ZEN to ZEN core 3.9

Item Number: 410138-0011-390

Transfer ZEN to ZEN core 3.9 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.9 Consisting of: - ZEN core 3.9 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

Item has been added to the configuration

Transfer ZEN to ZEN core 3.8

Recover

Item no.: 410138-0011-380

Transfer ZEN to ZEN core 3.8

Item Number: 410138-0011-380

Transfer ZEN to ZEN core 3.8 Transfer from an existing ZEN with modules/toolkits to ZEN core 3.8 Consisting of: - ZEN core 3.8 base license - ZEN Modules/Toolkits which are licensed in ZEN already and available in ZEN core

ZEN Basic Software

Item has been added to the configuration

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Recover

Item no.: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key

Item Number: 410138-1006-260

Platform change AV 4.x.x to ZEN 2.6 pro Hardware License Key Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN 2.6 pro blue edition. Consisting of: - ZEN 2.6 pro basic license - ZEN module Experiment Designer

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.7

Recover

Item no.: 410138-0902-370

Platform change AV 4.x to ZEN 3.7

Item Number: 410138-0902-370

Platform change AV 4.x to ZEN 3.7 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.7 Consisting of: - ZEN 3.7 basic license - entitles to purchase ZEN Packages/Toolkits with a discount

Item has been added to the configuration

Upgrade ZEN 3.4 to ZEN 3.7

Recover

Item no.: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7

Item Number: 410138-0302-370

Upgrade ZEN 3.4 to ZEN 3.7 Upgrade of an existing ZEN 3.4 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.4 installation

Item has been added to the configuration

Upgrade ZEN desk to ZEN 3.7 desk

Recover

Item no.: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk

Item Number: 410138-0204-370

Upgrade ZEN desk to ZEN 3.7 desk Upgrade of an existing ZEN desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Modules as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.5 to ZEN 3.7

Recover

Item no.: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7

Item Number: 410138-0202-370

Upgrade ZEN 3.5 to ZEN 3.7 Upgrade of an existing ZEN 3.5 software (pro/system) to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.5 installation

Item has been added to the configuration

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Recover

Item no.: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk

Item Number: 410138-0104-370

Upgrade ZEN 3.6 desk to ZEN 3.7 desk Upgrade of an existing ZEN 3.6 desk software to ZEN 3.7 desk Consisting of: - ZEN 3.7 desk Base license - Functions as in current ZEN desk installation

Item has been added to the configuration

Upgrade ZEN 3.6 to ZEN 3.7

Recover

Item no.: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7

Item Number: 410138-0102-370

Upgrade ZEN 3.6 to ZEN 3.7 Upgrade of an existing ZEN 3.6 software to ZEN 3.7 Consisting of: - ZEN 3.7 Base license - Functions as in current ZEN 3.6 installation

Item has been added to the configuration

ZEN Toolkit Molecular Quantification for ZEN desk

Recover

Item no.: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk

Item Number: 410137-0174-370

ZEN Toolkit Molecular Quantification for ZEN desk Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution for ZEN desk

Recover

Item no.: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk

Item Number: 410137-0173-370

ZEN Toolkit Deconvolution for ZEN desk Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques.

Item has been added to the configuration

ZEN Toolkit 3D for ZEN desk

Recover

Item no.: 410137-0172-370

ZEN Toolkit 3D for ZEN desk

Item Number: 410137-0172-370

ZEN Toolkit 3D for ZEN desk This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifyingautomatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Developer for ZEN desk

Recover

Item no.: 410137-0171-370

ZEN Toolkit Developer for ZEN desk

Item Number: 410137-0171-370

ZEN Toolkit Developer for ZEN desk Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can futher extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core).

Item has been added to the configuration

ZEN Toolkit Connect for ZEN desk

Recover

Item no.: 410137-0170-370

ZEN Toolkit Connect for ZEN desk

Item Number: 410137-0170-370

ZEN Toolkit Connect for ZEN desk This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (required 3Dxl) - ManualAlignment oftwo3D stacks (required 3Dxl)** - Import FIB stacks (*not ZEN lite <(>&<)> ZEN starter; motorized stage required) (**not available in ZENCore)

Item has been added to the configuration

ZEN Toolkit AI for ZEN desk

Recover

Item no.: 410137-0169-370

ZEN Toolkit AI for ZEN desk

Item Number: 410137-0169-370

ZEN Toolkit AI for ZEN desk The Intellesis AI Package allows to train, import and execute different machine- and deep-learning models inside ZEN and ZEN core. It contains three major AI core functionalities: - Machine- and Deep-Learning for segmenting images (training of Deep- Learning models on APEER or externally) - Machine-Learning for Object Classification in analyzed images (requires analyzed image data) - Deep-Learning based Denoising using Noise2Void (no need for labels) For every workflowexists as dedicated tool to label images or objects and train the respective model. The package supports any image data format that can be imported into ZEN and ZEN core incl. data imported via the 3rd party import from other vendors and can process multidimensional datasets including z-stacks, multi-channel and tile images. - Additionally the labeling and training of Deep Neural networks can be purchased as as part of a special customize solution (SCS). -The complete ZEN platform is "AI ready", i.e.trained models can be used in all image analysis tools in ZEN and ZEN core (e.g. Image Analysis, Bio Apps, Guided Acquisition, Technical Cleanliness Analysis, Metallography package,...) for segmentation. To run trained models within these modules, the ZEN Intellesis AI package is not required. - Important: Recommended hardware configuration is 8GB GPU and 64GB RAM. Only Nvidia GPUs and the CPU are supported.

Item has been added to the configuration

ZEN Toolkit 2D for ZEN desk

Recover

Item no.: 410137-0168-370

ZEN Toolkit 2D for ZEN desk

Item Number: 410137-0168-370

ZEN Toolkit 2D for ZEN desk Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizardprovides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally toclassical segmentationmethods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. Afterrunning the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belongingto the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups.

Item has been added to the configuration

ZEN Module LSM plus for ZEN desk

Recover

Item no.: 410137-0136-370

ZEN Module LSM plus for ZEN desk

Item Number: 410137-0136-370

ZEN Module LSM plus for ZEN desk Module for resolution enhancement of confocal channels

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-370

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-370

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan.

Item has been added to the configuration

ZEN Toolkit Bio Apps Floating License

Recover

Item no.: 410136-2175-360

ZEN Toolkit Bio Apps Floating License

Item Number: 410136-2175-360

ZEN Toolkit Bio Apps Floating License Image analysis for standard life science applications. The package contains a collection of Bio Apps that allow users to analyze images from standard life science applications in a simple and user-friendly way.The package includes Bio Appsfor cell counting, confluence measurement, gene- and protein expression, and automated spot detection, and is particularly suitable for analyzing experiments on multiwell plates. All Bio Apps are "AI-ready" and allow the use ofmachine learning models forimage segmentation. The analysis results are presented in interactive measurement tables and various plots. - Simple setup tailored to the specific application - Selection between fast classical segmentation or machine learning (AI) - Predefined parameters enhance ease-of-use - Dedicated and interactive result display (table, heatmap, timeseries, xy-scatterplot, histogram) - Simple export of results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: The use of AI segmentation requires an installation of ZeissPython. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Deconvolution Floating License

Recover

Item no.: 410136-2173-360

ZEN Toolkit Deconvolution Floating License

Item Number: 410136-2173-360

ZEN Toolkit Deconvolution Floating License Deconvolution is a mathematical method designed to remove or reassign the out-of-focus signals from or back into the in-focus structures to significantly improve contrast, signal-to-noise ratio and resolution. Deconvolution is based on mulit-GPU to provide results even faster. It has been successfully and routinely applied to almost all microscopy techniques. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 3D Floating License

Recover

Item no.: 410136-2172-360

ZEN Toolkit 3D Floating License

Item Number: 410136-2172-360

ZEN Toolkit 3D Floating License This package encompasses a 3D viewer as well as 3D image analysis tools. The ZEN user can use the Image Analysis for fast and easy-to-use quantification and 3D* images. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze image data. The wizard provides methods for flexible class definition and hierarchical measurements. The user can choose between different algorithms for segmentation, object separation and different range filters. Additionally, machine learning models can be used for segmentation ("AI- ready"). The measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. The resulting 3D objects are visualized using the 3Dxl viewer when working with 3D segmentation. The resulting objects can be sorted and exported. (*not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer Floating License

Recover

Item no.: 410136-2171-360

ZEN Toolkit Developer Floating License

Item Number: 410136-2171-360

ZEN Toolkit Developer Floating License Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated worfklows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Connect Floating License

Recover

Item no.: 410136-2170-360

ZEN Toolkit Connect Floating License

Item Number: 410136-2170-360

ZEN Toolkit Connect Floating License This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy* - Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*motorized stage required) (**not available in ZEN core) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit 2D Floating License

Recover

Item no.: 410136-2168-360

ZEN Toolkit 2D Floating License

Item Number: 410136-2168-360

ZEN Toolkit 2D Floating License Create flexible automatic pipelines for 2D image analysis. The package provides a wizard for creating and modifying automatic measurement programs. These measurement programs can be used to automatically analyze imagedata. The wizard provides methods for flexible class definition, hierarchical- and zone-of-influence* measurements. The user can choose between different algorithms for segmentation and object separation and can define different range filters. Additionally to classical segmentation methods, machine learning models can be used for segmentation ("AI-ready"). The available measurement functions include various geometric measurements and intensity measurements, as well as user-defined measurement parameters*. After running the analysis, the images are overlaid with the segmented masks and the measurement result tables are displayed together with interactive plots* (scatterplot, histogram, time series and heatmap). Tables, plots and images are linked, so that the user can explore the results interactively. The created image analysis programs can be used for batch processing. Includes the Bio App cell counting*. (*not ZEN core) The package also provides a number of additional image processing functions belonging to the Edges, Arithmetics, Morphology, Segmentation and Binary Operations groups. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit GxP Floating License

Recover

Item no.: 410136-2163-350

ZEN Toolkit GxP Floating License

Item Number: 410136-2163-350

ZEN Toolkit GxP Floating License The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process Floating License allows the flexible usage of the license on different clients within a networkenvironment.

Item has been added to the configuration

ZEN Toolkit Materials Apps Floating License

Recover

Item no.: 410136-2162-350

ZEN Toolkit Materials Apps Floating License

Item Number: 410136-2162-350

ZEN Toolkit Materials Apps Floating License This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximumdiameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 63942002 - Non-metallic inclusions (NMI): ISO4967:2013; GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004 Floating License allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.5 Floating License

Recover

Item no.: 410135-2035-350

ZEN analyzer 3.5 Floating License

Item Number: 410135-2035-350

ZEN analyzer 3.5 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - APEER (on-site) connectorenables the execution of customized solutions by integrating modules from the APEER platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN starter basic software (O)

Recover

Item no.: 410135-1010-000

ZEN starter basic software (O)

Item Number: 410135-1010-000

ZEN starter basic software (O) ZEN starter with basic functionality and user interface of ZEN core. Drivers for Axiocam cameras and image acquisition (SNAPs). No microscope control. - Configurable graphical user interface including workbench concept - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - Panorama for acquisition of Tiles Images with manual stage - Online Panorama for creation of stitched images on un-coded/ un- motorized stages - Video recorder functionality with movie export functionality - Manual Extended Focus (EDF) capability - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements and text annotations - Using of Microsoft Word report templates - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - Can only be extended with ZEN Toolkit Basic Acquisition and ZEN Module Coded Microscope Differences compared with ZEN core: - No microscope control - Limited image processing functions - No Job functionality - No HDR -Acquisition of High Dynamic Range Images Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN 3.7 desk

Recover

Item no.: 410135-0004-370

ZEN 3.7 desk

Item Number: 410135-0004-370

ZEN 3.7 desk ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.7

Recover

Item no.: 410135-0002-370

ZEN 3.7

Item Number: 410135-0002-370

ZEN 3.7 Image acquisition and processing under Windows 10 x64. User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis. CZI image format. The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Connect basic - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN Module Data Management

Item has been added to the configuration

Upgrade ZEN Data Explorer Viewer

Recover

Item no.: 410138-0931-360

Upgrade ZEN Data Explorer Viewer

Item Number: 410138-0931-360

Upgrade ZEN Data Explorer Viewer Conversion of an existing ZEN Data Storage Server License (Version 22.40 or older) into a license compatible with version 23.xx (or higher). The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. The newly integrated viewer, based on server side rendering, significantly enhances the display performance which is mainly reflected in the fast display of large and very large image files. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version: 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android Version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

Item has been added to the configuration

ZEN Module Sample Navigator

Recover

Item no.: 410136-0107-370

ZEN Module Sample Navigator

Item Number: 410136-0107-370

ZEN Module Sample Navigator Module for simple overview scan with autofocus function on LSM, with Axiocam or transmitted light fluorescence with T-PMT.

Item has been added to the configuration

Software Module LM-EM Correlative Microscopy

Recover

Item no.: 410136-0078-370

Software Module LM-EM Correlative Microscopy

Item Number: 410136-0078-370

Software Module LM-EM Correlative Microscopy Materials Module for image recording, navigation and correlation on light, digital and electron microscopes. - Software module for ZEN core and Smartzoom 5 software - Semi-automatic calibration of ZEISS Correlative Microscopy specimen holder - Manual calibration of custom holders and specimens with any type of fiducials - Definition of regions and points of interest (ROI/POI) - ZEN core only: Easy recovery of previously marked sample ROIs and POIs - ZEN core only: Alignment and overlay of light, digital and electron microscope images and creation of new overlay images - ZEN core only: Automated alignment of images using algorithms for key point detection

Item has been added to the configuration

ZEN Data Storage Server

Recover

Item no.: 410135-0031-360

ZEN Data Storage Server

Item Number: 410135-0031-360

ZEN Data Storage Server Database for storage and multi-client access of documents on a centralized server. ZEN applications can connect to the server as clients to store and retrieve data. ZEN Data Storage provides a client-server database solution for microscopy customers who deal with the storage of large amounts of data originating from one or several microscopes. ZEN Data Storage allows the exchange of data and workflows and supports microscopists who want to separate image acquisition from post-acquisition work. In this way it also facilitates correlative workflows where the data of a sample can be accessed from a centralized location. "Server side rendering" based display enables the user to visualize also very large files in a fast and seamless way. The centralized ZEN Data Storage enables IT managers to ensure data security and backup availability. It allows to manage users and user rights within a laboratory or even across multiple sites. Main features: - Scalable server database solution based on MS-SQL server - Integration into existing server landscape possible - Multi-client concurrent access to data - Server based user and access management - Integration of user management with Active Directory possible - Data access management on user and group level (ZEN blue only) - Full archive integration for ZEN core including storage of documents and templates - Optional: Compatible with ZEN Module GxP in ZEN core The package includes: ZEN Data Explorer - browser or app based client which allows access and viewing of the data stored on the ZEN Data Storage. Main features: - Gallery for browsing, grouping and searching of data - Viewer for images and ZEN Connect projects - Basic annotation functionality - Upload of images and camera snapshots (app version only) - Download and Snapshot functionality - Available in Browser or as app for iOS and Android ZEN Data Storage Uploader - upload tool which monitors a drop folder and uploads and if needed converts the files to CZI. Supported files types CZI, ZVI, Leica LIF, Nikon ND2, Olympus TIF, PDF The price includes installation and setup of the ZEN Data Storage server and ZEN Data Storage clients via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required), 32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone 6s or newer; Ipad 5 or newer (Mini versions not supported) iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome 88.0.4324.104 (64-bit)

ZEN core Platform change

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.9

Recover

Item no.: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9

Item Number: 410138-0911-390

Platform Change AV 4.x.x to ZEN core 3.9 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.9. Consisting of: - ZEN core 3.9 basic license - entitles to purchase ZEN Toolkits with a discount

Item has been added to the configuration

Platform Change AV 4.x.x to ZEN core 3.8

Recover

Item no.: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8

Item Number: 410138-0911-380

Platform Change AV 4.x.x to ZEN core 3.8 Platform change from an existing AxioVision Rel. 4.x.x software system to ZEN core 3.8. Consisting of: - ZEN core 3.8 basic license - entitles to purchase ZEN Toolkits with a discount

ZEN modules image processing

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.9

Recover

Item no.: 410138-0902-390

Platform change AV 4.x to ZEN 3.9

Item Number: 410138-0902-390

Platform change AV 4.x to ZEN 3.9 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.9 Consisting of: - ZEN 3.9 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

Platform change AV 4.x to ZEN 3.8

Recover

Item no.: 410138-0902-380

Platform change AV 4.x to ZEN 3.8

Item Number: 410138-0902-380

Platform change AV 4.x to ZEN 3.8 Platform change from an existing AxioVision Rel. 4.x software system to ZEN 3.8 Consisting of: - ZEN 3.8 base license - entitlement to purchase ZEN Modules/Toolkits with a discount

Item has been added to the configuration

ZEN Module Lattice Lightsheet Processing

Recover

Item no.: 410136-1125-320

ZEN Module Lattice Lightsheet Processing

Item Number: 410136-1125-320

ZEN Module Lattice Lightsheet Processing ZEN Module to process Lattice Lightsheet data. Contains ZEN Module Remote Processing

Item has been added to the configuration

ZEN Module 3D VisArt Hardware License Key

Recover

Item no.: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key

Item Number: 410136-1024-110

ZEN Module 3D VisArt Hardware License Key Module for visualisation of 3D image stacks as volume models, time series (4D)/movies, various rendering methods, maximum intensity projections. Tools for interactive 3D measurements.

Item has been added to the configuration

ZEN Module Deconvolution Hardware License Key

Recover

Item no.: 410136-1021-110

ZEN Module Deconvolution Hardware License Key

Item Number: 410136-1021-110

ZEN Module Deconvolution Hardware License Key Module for improvement of 3D image stacks with 3D deconvolution algorithms, methods for theoretical PSF.

ZEN modules image recording

Item has been added to the configuration

ZEN SEM Module Shuttle & Find Hardware License Key

Recover

Item no.: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key

Item Number: 410137-1056-210

ZEN SEM Module Shuttle & Find Hardware License Key. Module for acquisition of SEM images and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with SEM - Import of light microscopy images with position data to SEM and XB - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-380

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-380

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Module Shuttle & Find Software License Key

Recover

Item no.: 410136-0056-120

ZEN Module Shuttle & Find Software License Key

Item Number: 410136-0056-120

ZEN Module Shuttle & Find Software License Key Module for acquisition and correlation of light and electron microscope images - Calibration of XY-position and image acquisition with light microscope - Transfer of images with position data to SEM and XB running Shuttle & Find module under ZEN software - Marking and easy repositioning of interesting sample regions in SEM/XB - Overlay of light and electron microscopic images

Item has been added to the configuration

ZEN 3.9 desk floating license

Recover

Item no.: 410135-2004-390

ZEN 3.9 desk floating license

Item Number: 410135-2004-390

ZEN 3.9 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk floating license

Recover

Item no.: 410135-2004-380

ZEN 3.8 desk floating license

Item Number: 410135-2004-380

ZEN 3.8 desk floating license ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9 desk

Recover

Item no.: 410135-0004-390

ZEN 3.9 desk

Item Number: 410135-0004-390

ZEN 3.9 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.8 desk

Recover

Item no.: 410135-0004-380

ZEN 3.8 desk

Item Number: 410135-0004-380

ZEN 3.8 desk ZEN image processing under Windows 10 x64 Offline processing and analysis without microscope and camera control, includes basic ZEN functionality, CZI image format The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

ZEN 3.9

Recover

Item no.: 410135-0002-390

ZEN 3.9

Item Number: 410135-0002-390

ZEN 3.9 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - arivis cloud advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

Item has been added to the configuration

ZEN 3.8

Recover

Item no.: 410135-0002-380

ZEN 3.8

Item Number: 410135-0002-380

ZEN 3.8 Image acquisition and processing under Windows 10 x64 User interface configurable, control of the ZEISS microscope systems and components, extensive acquisition and analysis, CZI image format The following functions are included: - Apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client - Acquisition Base (time series and multichannel)

ZEN Module Image Analysis

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Advanced

Recover

Item no.: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced

Item Number: 410137-0179-380

ZEN desk Module Dynamics Profiler Advanced ZEN Module Dynamics Profiler Advanced for ZEN desk with additional flow- and diffusion analysis functionality. The ZEN desk Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN desk Module Lattice SIM

Recover

Item no.: 410137-0133-390

ZEN desk Module Lattice SIM

Item Number: 410137-0133-390

ZEN desk Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods.

Item has been added to the configuration

ZEN desk Module SMLM

Recover

Item no.: 410137-0041-390

ZEN desk Module SMLM

Item Number: 410137-0041-390

ZEN desk Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification Floating License

Recover

Item no.: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License

Item Number: 410136-2174-360

ZEN Toolkit Molecular Quantification Floating License Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, withRatiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery/ decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data whichhave been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulationisexecuted either atall tile regions per time point (photoactivation) or as full time series per tile region (bleaching). Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module LSM plus Floating License

Recover

Item no.: 410136-2136-370

ZEN Module LSM plus Floating License

Item Number: 410136-2136-370

ZEN Module LSM plus Floating License Module for resolution enhancement of confocal channels Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Lattice SIM floating license

Recover

Item no.: 410136-2133-390

ZEN Module Lattice SIM floating license

Item Number: 410136-2133-390

ZEN Module Lattice SIM floating license ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module SMLM floating license

Recover

Item no.: 410136-2041-390

ZEN Module SMLM floating license

Item Number: 410136-2041-390

ZEN Module SMLM floating license The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Floating license allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Confocal Topography Floating Licenses

Recover

Item no.: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses

Item Number: 410136-2038-370

ZEN Module Confocal Topography Floating Licenses Module for analysis of surface data and visualisation of measument results. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Recover

Item no.: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License

Item Number: 410136-2003-370

ZEN Modul FCS FCCS Add-on extended Fit Models Floating License The module enables global fitting for all data sets loaded and contains extended parameter sets for Fit models as well as the ability to create own Fit Models. Floating License allows theflexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Spectral RICS

Recover

Item no.: 410136-0182-390

ZEN Module Spectral RICS

Item Number: 410136-0182-390

ZEN Module Spectral RICS Single-molecule analysis based on raster image correlation spectroscopy. The calculation of CPM (Counts per Molecule) values allows the optimization of the hardware settings for the experiment. The calibration step with known dye solutions defines the confocal volume for quantitative data. Images of several different fluorescently labeled molecules can be clearly separated into image channels using single spectra. The typical crosstalk of the signals into other channels is thus resolved, which enables the calculation of correlations of different molecules to each other (cross-correlation). For analysis, regions in the image can be defined and threshold values can be set. Analysis masks can be created based on image regionsof the same image or a different image. The analysis uses a model of the three-dimensional diffusion of a single molecule. There are three different representations of the analysis to choose from: threshold-based standard analysis, Grid-based heatmap and Intensity-based heat map. In addition to the diffusion velocities, various other result parameters are summarized in a table.

Item has been added to the configuration

ZEN Toolkit 3D

Recover

Item no.: 410136-0172-360

ZEN Toolkit 3D

Item Number: 410136-0172-360

ZEN Toolkit 3D Unlock the full 3D potential with the Toolkit 3D. Equip yourself with a collection of rendering methods, tools for sophisticated visualization and data navigation as well as 3D image analysis. The 3D Toolkit offers multiple types of rendering methods allowing you to choose the visualization that best fits your application. A sophisticated 3D rendering can be overwhelming when exploring a data set. With the viewer available with ZEN 3D Toolkit, 3D and 2D views are placed side-by-side so you may navigate in the 3D space seamless through your sample. Analyze your 3D data – a user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Segmentation is AI-ready: load your Intellesis models or segment object based on thresholding. The resulting objects are visualized in 3D in glass or opaque mode. The measurements include various geometric and intensity measurements, as well as user-defined measurement parameters* which can be sorted and exported. The 3D viewer requires a dedicated up-to-date graphics card with full OpenGL 4.3+ support. Older AMD graphic cards such as AMD FirePro V4900 1GB or ATI FirePro V5800 1GB are not supported any longer. (*not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit 2D

Recover

Item no.: 410136-0168-360

ZEN Toolkit 2D

Item Number: 410136-0168-360

ZEN Toolkit 2D Create flexible automatic measurement programs for the analysis of your 2D images. Set up an automatic measurement program for analyzing your data sets (e.g., time series, tile images and multiscene images) in just a few steps. A user-friendly wizard guides you through all the necessary settings, starting with the definition of the classes and the segmentation of objects, to the selection of measurement parameters. Create simple measurement programs consisting of a single class or set up powerful measurement programs with multiple classes, which you can also arrange hierarchically (objects within objects) or use the predefined zone-of-influence* measurement program if you want to detect objects in the periphery of other objects. Flexibly choose between different classical and AI-based segmentation methods for each class. You can improve your results using AI models (semantic or instance segmentation) especially for datasets which are particularly difficult to segment. This toolkit is "AI-ready", which means you can use any trained AI model in the analysis program without requiring another license. Simply load a model previously trained with the ZEN Toolkit AI in ZEN or ZEN core into the Image Analysis Wizard, or use DNNs trained on arivis Cloud. Subsequently, you can further refine the segmentation results, e.g., by using algorithms for object separation or by applying region filters, if necessary. To quantify the detected objects, a variety of measurement features are available, such as different geometrical (size, shape,...) or intensity features as well as user-defined measurement parameters*. After the analysis, the segmented images are displayed along with result tables and diagrams (e.g., scatterplot or heatmaps). Tables, diagrams, and images are linked so that you can interactively explore your results. You can also use the created image analysis programs for batch processing of multiple data sets. In addition, this toolkit also includes the Bio App Cell Counting*. (*not available in ZEN core) For preprocessing of your image data, the toolkit additionally provides a number of special image processing functions belonging to the Edges (e.g. Highpass, Sobel, Laplace,…), Arithmetic (e.g. Addition, Multiply Constant,…), Morphology (e.g. Erode, Dilate, TopHat,…), Segmentation (e.g. Canny, Marr…) and Binary (e.g. Fill Holes, And, Or,…) Operations groups. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Module SMLM

Recover

Item no.: 410136-0041-390

ZEN Module SMLM

Item Number: 410136-0041-390

ZEN Module SMLM The ZEN module SMLM is used for the detection and localization of single molecules in a plane or volume. Special acquisition modalities allow 3- dimensional acquisition via a phase ramp, as well as iterative sequential excitation of two differently labeled molecules.

ZEN modules image acquisition

Item has been added to the configuration

ZEN desk Module Dynamics Profiler Basic

Recover

Item no.: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic

Item Number: 410137-0178-380

ZEN desk Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic for ZEN desk with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced Floating License

Recover

Item no.: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License

Item Number: 410136-2179-380

ZEN Module Dynamics Profiler Advanced Floating License ZEN Module Dynamics Profiler Advanced Floating License with additional flow- and diffusion analysis functionality. The Module Dynamics Profiler Basic Floating License is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-2178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-2178-380

ZEN Module Dynamics Profiler Basic ZEN Module Dynamics Profiler Basic Floating License with basic correlation analysis functionality.

Item has been added to the configuration

ZEN Module Airyscan Joint Deconvolution Floating License

Recover

Item no.: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License

Item Number: 410136-2147-370

ZEN Module Airyscan Joint Deconvolution Floating License ZEN Module Airyscan Joint Deconvolution, additional deconvolution for Airyscan SR data (4 or 32 phase format). Intelligent algorithm based on Joint Iterative methods. Selectable iteration numberfor maximum results and ease of use. Provides superresolution results down to 90nm lateral resolution with suiting samples on LSM systems with Airyscan detection module.

Item has been added to the configuration

ZEN Module Counting and basic FCS Floating License

Recover

Item no.: 410136-2079-370

ZEN Module Counting and basic FCS Floating License

Item Number: 410136-2079-370

ZEN Module Counting and basic FCS Floating License Enables image acquisition in counting mode for GaAsP detectors: 2+4ch Quasar and 2+32ch Quasar (both need additional HW), 2+1ch Quasar, cooled MA-PMT and BiG.2. The Modulea also enables the acquisition of fluorescence correlation spectroscopy data (FCS) with one channel (autocorrelation) providing one Fit Model. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan floating license

Recover

Item no.: 410136-2064-380

ZEN Module Airyscan floating license

Item Number: 410136-2064-380

ZEN Module Airyscan floating license Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format. Floating license allows the flexible usage of the license on differentclients within a network environment.

Item has been added to the configuration

ZEN Module Airyscan Floating License

Recover

Item no.: 410136-2064-370

ZEN Module Airyscan Floating License

Item Number: 410136-2064-370

ZEN Module Airyscan Floating License Module for processing of image data acquired with Airyscan. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module FCS FCCS Add-on PCH Floating License

Recover

Item no.: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License

Item Number: 410136-2005-370

ZEN Module FCS FCCS Add-on PCH Floating License Provides the entry function to calculate Number and Brightness of molecule populations. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Counting Add-on FCS and FCCS Floating License

Recover

Item no.: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License

Item Number: 410136-2004-370

ZEN Module Counting Add-on FCS and FCCS Floating License Enables Fluorescence Correlation and Cross-Correalation Spectroscopy using any counting capable GaAsP-PMT and MA-PMT detectors. The software includes single molecule analyses, an extended range ofFit Models and the acquisition of spectral FCS / FCCS data. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module Dynamics Profiler Advanced

Recover

Item no.: 410136-0179-380

ZEN Module Dynamics Profiler Advanced

Item Number: 410136-0179-380

ZEN Module Dynamics Profiler Advanced Dynamics Profiler Advanced enables to collect unique molecular characteristics of fluorescently labelled proteins or other molecules. Using the individual detector elements of the Airyscan detector, specific fluorescence correlation spectroscopy (FCS) techniques provide additional area-based information. In addition to classic FCS parameters (see SW ZEN Module Dynamics Profiler Basic) every measurement includes the opportunity to analyze a) Dynamics with pair correlation to investigate e.g., diffusion barriers and b) active flow providing speed in µm/s and its direction. The Module Dynamics Profiler Basic is required as a prerequisite.

Item has been added to the configuration

ZEN Module Dynamics Profiler Basic

Recover

Item no.: 410136-0178-380

ZEN Module Dynamics Profiler Basic

Item Number: 410136-0178-380

ZEN Module Dynamics Profiler Basic Dynamics Profiler allows to gather details of the molecular characteristics of living samples – providing concentration and dynamics information of fluorescently labelled molecules. Expanding the capability of the Airyscan detector and utilizing the area information gathered from 32 circular arranged detection elements for fluorescence correlation spectroscopy (FCS). Data acquisition is guided by a wizard which serves both simplicity and usability. Using the context of a reference image up to 10 measurement spots can be obtained consecutively and analyzed by various fit models. Additionally, the Raw data of all Airyscan detection elements can be exported and used for individual analysis.

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-390

ZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in thecamera image

Item has been added to the configuration

ZEN Toolkit Motorized Focus Acquisition

Recover

Item no.: 410136-0173-380

ZEN Toolkit Motorized Focus Acquisition

Item Number: 410136-0173-380

ZZEN Toolkit Motorized Focus Acquisition This toolkit allows to acquire z-stack image and images with enhanced depth of field on systems with motorized z-drive. These acquisitions can be combined with the included software autofocus. Z-stack and enhanced depth of focus functionality: - definition of the z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Software Autofocus: - determination of the optimal focus position in the sample - autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Connect

Recover

Item no.: 410136-0170-360

ZEN Toolkit Connect

Item Number: 410136-0170-360

ZEN Toolkit Connect This package contains the full ZEN Connect functionality for 2D- and 3D- workflows. It supports single system workflows as well as workflows between multiple systems (with or without correlative sample holders). It extends the functionality of ZEN Connect basic by the following functions: - Interactive control of stage movement from the ZEN Connect workspace* - Advanced 2D alignment functionality - Measurements in the ZEN Connect workspace - Export of merged project view as image (single and multi-channel) - Export of project views as fly-through movie - Export to SerialEM file format - Import of 3rd-party microscopy images powered by Bio-Formats - Semiautomatic calibration of sample holders for correlative microscopy -Definition of regions of interest in the correlative workspace - Easy retrieval of marked regions - Control of the displayed z-position in ZEN Connect - Alignment of images in z-dimension - View two 3D stacks (requires 3D Toolkit)** - Manual Alignment of two 3D stacks (requires 3D Toolkit)** - Import FIB stacks** (*not ZEN lite and ZEN starter; motorized stage required) (**not available in ZEN core)

Item has been added to the configuration

ZEN Toolkit Smart Acquisition

Recover

Item no.: 410136-0167-360

ZEN Toolkit Smart Acquisition

Item Number: 410136-0167-360

ZEN Toolkit Smart Acquisition This package includes functions for creating flexible and intelligent image acquisitions workflows with the Experiment Designer, Guided Acquisition and Experiment Feedback tools. Experiment designer allows to configure inhomogeneous acquisition experiments: time series, multitime series, Z-stacks, tiles/multiposition images and channels in any order. Note: The image acquisition using this toolkit requires the Motorized or Advanced acquisition package. Please note that some parameters of Definite focus are currently not transferred between experiment blocks. Guided Acquisition allows automatic and targeted acquisition of objects of interest (e.g. for rare events): 1st step: acquisition of an overview image of the sample 2nd step: automatic 2D image analysis to detect objects of interest 3rd step: acquire detailed images for the detected objects Experiment Feedback provides the ability to respond to changes in the sample, the microscope or external triggers during an image acquisition and to modify an ongoing acquisition via powerful Python scripts (not available in ZEN core).

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-390

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-390

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and theminimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-380

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-380

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components Z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drivebacklash compensation for maximum precision and reproducibility - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image. HDR Confocal basic: - High dynamic rangeimaging for LSM series - Automatic acquisition and merging of images with different excitation intensities

Item has been added to the configuration

ZEN Toolkit Advanced Acquisition

Recover

Item no.: 410136-0166-370

ZEN Toolkit Advanced Acquisition

Item Number: 410136-0166-370

ZEN Toolkit Advanced Acquisition Acquisition enabled by motorized components, control of Zeiss imaging systems and devices (Celldiscoverer 7, Lattice Ligthsheet 7, LSM 900/ 980) Package for the acquisition of large area images or z-stacks using motorized components z-stack and enhanced depth of focus functionality: - Definition of the Z-stack in "Start/Stop"and "Center" mode - Size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment. - Minimum increment of 10 nanometers can be set (depending on acquisition system). - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - Integrated Z-drive backlash compensation for maximum precision and reproducibility. - Extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field. -Wavelet algorithm allows use in transmitted light and reflected light Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - supports focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample. - The autofocus works with transmitted, reflected and fluorescence light. - Definition of an autofocus region in the camera image.

Item has been added to the configuration

ZEN Toolkit Motorized Acquisition

Recover

Item no.: 410136-0165-390

ZEN Toolkit Motorized Acquisition

Item Number: 410136-0165-390

ZEN Toolkit Motorized Acquisition Acquire images and control motorized components in multi-dimensional experiments. This package allows to acquire tiles, multi-position and z-stack images using motorized components. These can be combined with the included autofocus and direct processing. z-stack and enhanced depth of focus functionality: - definition of the Z-stack in "Start/Stop" and "Center" mode - size of the configurable Z-stack and number of possible Z-planes only limited by the travel range of the system and the minimum increment - "Optimal" button to automatically set the correct increment to satisfy the Nyquist criterion - integrated Z-drive backlash compensation for maximum precision and reproducibility - extraction of the sharp details from individual images at various focus positions and combination into an image with high depth of field Tiles <(>&<)> Positions - automatic scanning of predefined sample areas - acquisition of images according to a position list - support of focus correction maps, stitching and shading correction - compatible with software autofocus Software Autofocus: - determination of the optimal focus position in the sample - the autofocus works with transmitted, reflected and fluorescence light - definition of an autofocus region in the camera image

Item has been added to the configuration

ZEN Toolkit Base Acquisition

Recover

Item no.: 410136-0164-360

ZEN Toolkit Base Acquisition

Item Number: 410136-0164-360

ZEN Toolkit Base Acquisition Acquire images including Time lapse, multi-channel fluorescence <(>&<)> brightfield. This package allows to acquire fluorescence and transmitted light images as well as contrast methods in independent channels. Furthermore, it provides functionality to acquire a time-lapse image of dynamic samples. For multi-channel acquisitions the following features are available: - Acquisition of multiple independent channels for reflected light and transmitted light techniques - Dyes (including wavelength information) can be selected from a database containing more than 500 dyes or fluorescent proteins, and for all common transmitted light contrast techniques supported by the acquisition system (e.g. brightfield, phase contrast, DIC, darkfield, etc.) - Smart setup generation of the required microscope setting for a channel that is added - Possibility of adjusting light intensity and camera settings manually for each channel - Display of channels in a pseudo color image with overlay option or as a monochrome single channel display - Possibility to generate shading corrections for each channel - A focus reference channel can be defined For time-lapse acquisition following functionality exists: - Definition of time series by selection of intervals, total duration or number of cycles. - Control via time, trigger* or manually *only ZEN

Item has been added to the configuration

ZEN Toolkit Materials Apps

Recover

Item no.: 410136-0162-350

ZEN Toolkit Materials Apps

Item Number: 410136-0162-350

ZEN Toolkit Materials Apps This package contains standard-based workflows for materials applications. The workflows contain all steps from image acquisition, analysis, interactive result display to reporting. Several applications are "AI-ready" and allow the use of machine learning models for image segmentation. Following applications are included: Grain Size Analysis Application for grain size determination with the following three measurement methods: - Planimetric method: Automatic reconstruction of grain borders (single grains measurement and determination of the grain size distribution) - Intercept method: Semiautomatic measurement with chord pattern - Compare method: Manual with comparative diagrams (wall charts) - Measurement according to following standards: DIN EN ISO 643:2020; ASTM E 112-13 Plate I - IV; ASTM E 1382-97; GB/T 6394 2017 Cast Iron Analysis Application for form and size analysis of graphite particles in cast iron with the following measurement method: - Shape and size distribution in area percentage (optional: graphite arrangement with wall charts) - Provided standard: DIN EN ISO 945 # 2019 - Additional manual reclassification of Phases Multiphase analysis Application for automatic measurement of particle size and area content of multiphase samples, also evaluation of porosity - Detection (gray values or color) and determination of particle size distribution of up to 32 phases - Available measurement parameters: Area, equivalent diameter circle, maximum diameter, perimeter, roundness, elliptical axes A and B, color/gray value - Archiving of all measurements and generated data Comparative Diagrams Application for comparing micrographs with comparative charts (Wall Charts) - Comparison with one, two, four or eight Comparative Diagrams in one view with overlay possibility of image and chart for direct comparison - Provided standards: - Grains: DIN EN ISO 643:2012; ASTM E 112-13 Plate I - IV; GB/T 6394 2002 - Non-metallic inclusions (NMI): GB-10561; EN 10247:2007, ASTM E 45:2013; DIN 50602:1987 - Graphite: EN ISO 945-1: 2008 + Cor. 1: 2010 - Chart Series Creator: Functionality for generation of customer specific charts Additional information: - The license of the Comparative Diagrams (Wall Chart Images) from the standards is included in the product. The particular standard license has not to be present on the customer's site any longer. Layer Thickness Measurement Application for measuring the thickness of layers - Automatic and interactive measurement of simple and complex (curved) layers - No limits for number of layers per test procedure - Detection of all measuring points (chords) per layer for statistical evaluation - Parallelization of Chords as post-processing function - Length of measured section as additional result - Provided standards: ASTM B 487 – 2007, DIN EN ISO 1463 - 2004

Item has been added to the configuration

ZEN Module Lattice SIM

Recover

Item no.: 410136-0133-390

ZEN Module Lattice SIM

Item Number: 410136-0133-390

ZEN Module Lattice SIM ZEN Module Lattice SIM includes algorithms for reconstruction of SIM images using linear and iterative methods

Item has been added to the configuration

ZEN Module Airyscan

Recover

Item no.: 410136-0064-380

ZEN Module Airyscan

Item Number: 410136-0064-380

ZEN Module Airyscan Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Module HDR Confocal Basic Hardware License Key

Recover

Item no.: 410136-0007-370

ZEN Module HDR Confocal Basic Hardware License Key

Item Number: 410136-0007-370

ZEN Module ROI-HDR ROI High Dynamic Range Imaging. Acquisition and display of HDR image data with extended dynamic range, incl. illumination blanking.

ZEN image processing modules

Item has been added to the configuration

ZEN Module Airyscan for ZEN desk

Recover

Item no.: 410137-0064-380

ZEN Module Airyscan for ZEN desk

Item Number: 410137-0064-380

ZEN Module Airyscan for ZEN desk Module for processing of image data acquired with Airyscan. Includes the option for acquisition and saving of data using the 32 phase format.

Item has been added to the configuration

ZEN Modul Lattice Lightsheet Processing Floating License

Recover

Item no.: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License

Item Number: 410136-2176-370

ZEN Modul Lattice Lightsheet Processing Floating License Lattice Lightsheet specific image processing functions for data collected with this instrument. Includes the processing functions Deskew and Subset. Both can be used singly or in combination. Furthermore, there is the possibility to start a deconvolution (singly or in combination with the other two Processing functions) if the deconvolution toolkit required for deconvolution is installed. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox Floating License

Recover

Item no.: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License

Item Number: 410136-2126-360

ZEN Module EM Image Processing Toolbox Floating License Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Bio Apps

Recover

Item no.: 410136-0175-370

ZEN Toolkit Bio Apps

Item Number: 410136-0175-370

ZEN Toolkit Bio Apps Easy-to-use image analysis for standard life science applications. Choose from the selection of Bio Apps one, that fits your application and simply adapt the preconfigured Bio App to your data if necessary. Use fast, classical segmentation methods or powerful AI models to detect your cells even more accurately. This toolkit is "AI-ready", meaning you can use previously trained AI models in the Bio Apps without needing another license. Simply load an AI model trained with the ZEN Toolkit AI or a DNN trained on apeer for semantic or instance segmentation in the BioApp. After analysis, the segmented images are displayed along with customized results tables and diagrams (e.g., heatmaps and scatterplots) so you can get a quick overview of your sample. At the same time, tables, charts, and images are interlinked so that you can explore the results interactively. All Bio Apps offer a heatmap view, making them particularly suitable for analyzing experiments in multi-well plates. They support both 2D endpoint and live cell assays. - Get started fast with Bio Apps tailored to specific applications - Available Bio Apps: Cell counting, confluency, gene- and protein expression and automated spot detection - Easy operation with predefined parameters - Choose between fast classical segmentation or more powerful AI-models: use AI models trained with the ZEN Toolkit AI or DNNs trained on apeer with semantic or instance* segmentation (*not Confluency) - Visualize your results with dedicated and interactive result displays (table, heatmap, timeseries, xy-scatterplot, histogram) - Export your results, plots, and processing settings - Supports 2D fixed timepoint and time-series analysis Requirements: - The use of AI semantic segmentation requires an installation of Z Zeiss Python. - The use of AI instance segmentation requires an installation of Docker Desktop For the use of AI models the recommended hardware configuration is 8GB GPU and 64GB RAM. Only CPU and Nvidia GPUs are supported.

Item has been added to the configuration

ZEN Toolkit Molecular Quantification

Recover

Item no.: 410136-0174-370

ZEN Toolkit Molecular Quantification

Item Number: 410136-0174-370

ZEN Toolkit Molecular Quantification Includes functions for the for investigation of diverse dynamic and molecular interaction phenomena of diverse specimens Physiology Tool for the analysis of physiological time series data, with Ratiometric measurements, including mean ROI measurement. Includes specialised charting and viewing functions FRAP Efficiency Analysis Analysis of FRAP/FLIP or similar time series acquisitions with bleach events to determine the half time of recovery / decrease of fluorescent signals using mono or bi-exponential fit algorithms including options for background correction, correction of imaging induced photo bleaching and the possibility to evaluate grouped ROIs. FRET Analysis of FRET data which have been created with either "Sensitized Emission" or "Acceptor Photobleaching" approaches. Includes a special FRET View with calculation of control parameters, a color-coded display of the resulting images as well as the intensity changes of selected image regions. The most common methods are supported: Gordon, Xia, Youvan. Automated Photomanipulation For LSM 900/980 and Celldiscoverer 7 with LSM 900 For automated photoactivation and bleaching at multiple positions. The ROIs for photomanipulation are automatically determined and applied in the experiment. Allows the automated acquisition of an image at every position, the identification of the ROIs via image analysis followed by the photomanipulation experiment. The photomanipulation is executed either a tall tile regions per time point (photoactivation) or as full time series per tile region (bleaching).

Item has been added to the configuration

ZEN Toolkit Deconvolution

Recover

Item no.: 410136-0173-370

ZEN Toolkit Deconvolution

Item Number: 410136-0173-370

ZEN Toolkit Deconvolution Sharpen your images with mathematically exact deconvolution and make previously unknown structures visible by increasing your image contrast and resolution. Execute the underlying iterative 3D DCV algorithms by leveraging multi-GPU in just minutes. You have the choice between preset parameters and free parameter selection in expert mode.

Item has been added to the configuration

ZEN Module EM Image Processing Toolbox

Recover

Item no.: 410136-0126-370

ZEN Module EM Image Processing Toolbox

Item Number: 410136-0126-370

ZEN Module EM Image Processing Toolbox Module that provides special image processing functions for the processing of EM data. The module consists of a group of algorithms for the processing of EM datasets, such as drift correction, histogram equalization, noise reduction and removal of curtaining artifacts. This module is especially suitable for the processing of EM data acquired under cryo-conditions. If the PC system is equipped with a NVIDIA GPU it is possible to use the GPU-version for the "Remove Stripes" image processing function and speedup the processing time. It is recommended to use at least a workstation with a NVIDIA GPU with at least 4 GB of memory (and install latest Nvidia drivers).

Item has been added to the configuration

ZEN Module Correlative Array Tomography (CAT)

Recover

Item no.: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT)

Item Number: 410136-0061-370

ZEN Module Correlative Array Tomography (CAT) Module for automated image acquisition of ultrathin sections in widefield microscopes. The software module includes image acquisition, the Z-stack alignment and the correlation of the Z-stacks. - Wizard-based workflow solution - Precise correlative calibration in widefield microscopes - Hierarchical image acquisition using the full range of magnification - Definition and imaging of regions of interest and even imaging of complete sections - Automated large area imaging - 3D reconstruction of 3D datasets (Z-stacks) - Registration of correlative 3D datasets - Using the full potential of the ZEN imaging software on the light microscope - Can be used as a non-correlative array tomography module

Item has been added to the configuration

ZEN Module Confocal Topography

Recover

Item no.: 410136-0038-370

ZEN Module Confocal Topography

Item Number: 410136-0038-370

ZEN Module Confocal Topography Module for analysis of surface data and visualisation of measument results.

ZEN Module Configuration

Item has been added to the configuration

ZEN Toolkit AI 1 year license

Recover

Item no.: 410136-3169-380

ZEN Toolkit AI 1 year license

Item Number: 410136-3169-380

ZEN Toolkit AI 1 year license Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. License validity period: 1 year from date of activation

Item has been added to the configuration

ZEN Toolkit AI Floating License

Recover

Item no.: 410136-2169-380

ZEN Toolkit AI Floating License

Item Number: 410136-2169-380

ZEN Toolkit AI Floating License Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void. Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN andZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative toan own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services. The floating license allows the flexible use of the license on different clients within a network environment.

Item has been added to the configuration

ZEN Toolkit Developer

Recover

Item no.: 410136-0171-360

ZEN Toolkit Developer

Item Number: 410136-0171-360

ZEN Toolkit Developer Customization, extension and automation of ZEN and ZEN core. With this package, users can create automated workflows in ZEN and ZEN core and automate image acquisition, image processing and analysis steps. The package includes an integrated Development Environment (IDE) with editor, debugger and recorder* which allows the control of selected ZEN and ZEN core functionality via scripts. With this macro interface and the Python programming language, users can create both simple macro code as well as advanced scripts. Users can further extend the functionality by including additional libraries. This package also allows to control of ZEN via TCP/IP* and COM* remotely. (*not available for ZEN core)

Item has been added to the configuration

ZEN Toolkit AI

Recover

Item no.: 410136-0169-380

ZEN Toolkit AI

Item Number: 410136-0169-380

ZEN Toolkit AI Make use of powerful AI tools. With this package, you can train AI models in ZEN and ZEN core for various applications: - Solve your most challenging segmentation tasks within ZEN and ZEN core image analysis workflows. - Classify segmented objects with ZEN Toolkit 2D using powerful AI models - De-noise your images using deep learning methods based on Noise2Void Train your AI models in a tool optimized specifically for each workflow. The ease of use allows even non-experts to fully utilize the training tools and benefit from powerful AI methods. Thanks to a seamless integration in ZEN and ZEN core, you can use your models directly in the different toolkits (e.g. 2D Toolkit, Bio Apps Toolkit, Smart Acquisition Toolkit, Technical Cleanliness Analysis, Materials Apps Toolkit) and thus easily process multidimensional datasets such as Z-stacks, time series, multichannel and tiled images. The package supports all image data formats that can be opened in ZEN and ZEN core, meaning you can also process file formats from other vendors imported via the 3rd party import. The complete ZEN platform is "AI ready", i.e. you can run the once trained models in all supported toolkits in ZEN and ZEN core. As an alternative to an own training with the ZEN Toolkit AI, you can let annotation of your data sets and training of a Deep Neural Network be performed as part of a custom solution (SCS) and just use the specifically trained networks in the various toolkits. Requirements: - The use of AI semantic segmentation requires an installation of Zeiss Python. Recommended hardware configuration is 8GB GPU and 64GB RAM. Only the CPU and Nvidia-GPUs are supported. A one-year subscription for the arivis Cloud platform is included allowing to train AI models for ZEN and ZEN core using arivis AI services.

Item has been added to the configuration

ZEN Toolkit GxP

Recover

Item no.: 410136-0163-350

ZEN Toolkit GxP

Item Number: 410136-0163-350

ZEN Toolkit GxP The GxP Toolkit for ZEN core allows the user to declare his system 21 CFR Part 11 compliant if a validation of the system is performed. The GxP Toolkit enables following functionalities: - Audit Trail - checksum encrypting protection and electronic signature of result data and job templates in the ZEN core archive - release procedure for Job Templates - different user roles (e.g. operator and supervisor) allowing configurable access to the system Note: The system validation is not included in the Toolkit and has to be performed by ZEISS or other personal that is trained and certified on the GxP validation process.

Item has been added to the configuration

ZEN Module Coded Microscope

Recover

Item no.: 410136-0155-350

ZEN Module Coded Microscope

Item Number: 410136-0155-350

ZEN Module Coded Microscope Module for reading out coded microscope components in ZEN starter. The module enables the display of coded components such as objectives and reflector cubes. Moreover the position of a coded stage can be read out and displayed. Compatible with systems which contain ONLY manual and coded components. ANY motorized components will not be read-out or controlled by this module. Only available for ZEN starter.

ZEN drivers

Item has been added to the configuration

ZEN Toolkit Peripheral Device Drivers

Recover

Item no.: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers

Item Number: 410136-0177-370

ZEN Toolkit Peripheral Device Drivers Contains drivers for the following devices: Software Driver Uniblitz Driver for control of Uniblitz controllers VCM-D1, VMM-D1. Control of the Uniblitz shutter ("open"/ "closed"). Software Driver Ludl XY Stage Control Driver for the X-, Y-axis of the Ludl XY stage controller. The following types are supported: MAC 5000 XY, MAC 6000 XY. Software Driver Ludl Filterwheel/Shutter Driver for positioning of filters and control of the shutters. Up to 4 filter wheels and 6 shutters simultaneously. Supported controllers: MAC 5000, MAC 6000. Software Driver Sutter DG-4/Filter/Shutter Driver for positioning of the filter wheel and controlling of the shutter via software directly. Supports the Sutter controller Lambda10- 3, Lambda 10-2 and the light sources DG-4 and DG-4 Plus. SW Driver ASI Stage DC with attachment Z Piezo Driver for control of scanning stage XY DC 100x100 with attachment Z Piezo and scanning stage XY DC 110x90 with attachment Z Piezo / Rot.En. Software Driver PIFOC / Prior Driver for control of piezo objective focus unit and stage attachment Z- PIEZO.

Item has been added to the configuration

ZEN SW Driver Linkam Cryo Stage

Recover

Item no.: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage

Item Number: 410136-0124-370

ZEN SW Driver Linkam Cryo Stage - Control of motorized x-, y-axis of CMS196M - Readout and storage of the temperature values in the image - Asynchronous temperature log

Item has been added to the configuration

ZEN Software Driver PCO

Recover

Item no.: 410136-0060-370

ZEN Software Driver PCO

Item Number: 410136-0060-370

ZEN Software Driver PCO Driver for the use of pco.edge cameras edge 5.5 CL, edge 4.2 CL/USB3.0, edge CLHS, edge 4.2 bi

Item has been added to the configuration

ZEN Software Driver Hitachi Camera

Recover

Item no.: 410136-0057-370

ZEN Software Driver Hitachi Camera

Item Number: 410136-0057-370

ZEN Software Driver Hitachi Camera Driver for the operation of the Hitachi camera HV-F202SCL

Item has been added to the configuration

ZEN Software Driver Andor

Recover

Item no.: 410136-0054-370

ZEN Software Driver Andor

Item Number: 410136-0054-370

ZEN Software Driver Andor Driver for use of Andor b/w EMCCD cameras iXon 888 Ultra USB 3.0, iXon 897 Ultra 2.0, iXon 897 Life USB 2.0.

Item has been added to the configuration

ZEN Software Driver Roper PVCAM

Recover

Item no.: 410136-0046-370

ZEN Software Driver Roper PVCAM

Item Number: 410136-0046-370

ZEN Software Driver Roper PVCAM Driver for the use of Roper/Photometrics/QImaging b/w cameras Evolve 512, Evolve 512 Delta, Prime 95B, Prime BSI, Prime B 22mm

Item has been added to the configuration

ZEN Software Driver Hamamatsu Cameras

Recover

Item no.: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras

Item Number: 410136-0045-370

ZEN Software Driver Hamamatsu Cameras Driver for the use of Hamamatsu b/w cameras Orca Flash 4.0 V3 CL/USB3.0, Orca Flash LT USB3.0, Image EM X2 512, Image EM X2-1K, Orca Fusion

Item has been added to the configuration

ZEN Software Driver Linkam

Recover

Item no.: 410136-0044-350

ZEN Software Driver Linkam

Item Number: 410136-0044-350

ZEN Software Driver Linkam Module to control Linkam Single-Element Heating/Freezing Stages and Vacuum option - Setup of temperature curves with individually defined temperature ramps - Acquisition of time series or temperature series - 5-point temperature calibration - Automatic logging and graphic representation of temperature- and vacuum data - Simultaneous presentation of temperature curve and temperature/time series - T95/T96-LinkPad and PE95/PE96-LinkPad controller supported

Item has been added to the configuration

ZEN desk (network license)

Recover

Item no.: 410135-2004-370

ZEN desk (network license)

Item Number: 410135-2004-370

ZEN desk (network license) ZEN image processing under Windows 10 x64. Offline processing and analysis without microscope and camera control. Includes basic ZEN functionality. CZI image format. The following functions are included: - 3rd Party import - apeer onsite advanced - Basic 3D viewing - Colocalization - Connect basic - Direct Processing - Extended focus processing - Manual EDF - Measurement - Panorama - Spectral unmixing - ZEN Data Storage Client

Item has been added to the configuration

Virtual Slide Box

Recover

Item no.: 410135-0047-370

Virtual Slide Box

Item Number: 410135-0047-370

Virtual Slide Box E-learning package for virtual slides in Education. Packages offers digitalization for 20 slides and a solution for storage and sharing of virtual slides. Virtual slides can be accessed by students remotely with free of charge ZEISS Explorer app. Package includes the following services and software packages: - ZEN Data Storage as storage solution for the digitized slides - ZEN Data Explorer for remote access to stored slides via browser or iOS/Android app - Free of charge scanning service of 20 slides (with cover glass, brightfield only). Please use the ZMCC Demo Request Form in preparation of the scanning of the slides. The price includes installation and setup of the ZEN Data Storage server via remote desktop sharing by ZEISS Service. Server hardware not included and must be purchased separately. System requirements (ZEN Data Storage Server): Memory: 16 GB (required),32 GB (recommended) Processor: Quad-core@2GHz (required), Octa-core@2.4GHz (recommended) Storage: RAID1 or RAID6 recommended for data redundancy Operating system: Windows Server 2016 or higher SQL-Version (if existing): MS-SQL 2016 or higher Network: 1Gb/s (required), 10Gb/s (recommended) System requirements (ZEN Data Explorer): iOS: Device: iPhone® 6s or newer; Ipad® 5 or newer (Mini versions not supported); iOS Version 13 or later Browser: Safari Android: Device: Samsung Galaxy Tab S (SM-T830) or newer Android version: Android 8.1 or later Windows: Browser: Google Chrome88.0.4324.104 (64-bit) Windows: Browser: Google Chrome 78.0.3904.108 Apple® iPad Pro® iPhone® are registered trademarks of Apple Inc.

ZEN core base software

Item has been added to the configuration

ZEN analyzer 3.9 Floating License

Recover

Item no.: 410135-2035-390

ZEN analyzer 3.9 Floating License

Item Number: 410135-2035-390

ZEN analyzer 3.9 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.8 Floating License

Recover

Item no.: 410135-2035-380

ZEN analyzer 3.8 Floating License

Item Number: 410135-2035-380

ZEN analyzer 3.8 Floating License Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating system: Windows 10 (64-Bit) Floating License allows the flexible usage of the license on different clients within a network environment.

Item has been added to the configuration

ZEN analyzer 3.9

Recover

Item no.: 410135-0035-390

ZEN analyzer 3.9

Item Number: 410135-0035-390

ZEN analyzer 3.9 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN analyzer 3.8

Recover

Item no.: 410135-0035-380

ZEN analyzer 3.8

Item Number: 410135-0035-380

ZEN analyzer 3.8 Software suite for processing and analysis of light and electron microscopic images and documents without microscopy connection. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Processing of EDF and topography image from z-stacks - Interactive/dimensional measurements - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Import of 3rd-party images using Bio-Formats library - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

Item has been added to the configuration

ZEN core 3.9

Recover

Item no.: 410135-0011-390

ZEN core 3.9

Item Number: 410135-0011-390

ZEN core 3.9 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 (64-Bit)

Item has been added to the configuration

ZEN core 3.8

Recover

Item no.: 410135-0011-380

ZEN core 3.8

Item Number: 410135-0011-380

ZEN core 3.8 Software suite for microscope image acquisition, processing, analysis, and data connectivity. - Configurable graphical user interface including workbench concept for customized routine jobs and workflows - Full integration of the ZEISS microscopes (incl. Smartproof 5 and Visioner 1) that can be configured in MicroToolbox, Axiocam cameras and additional components. - Interactive and automatic control of the individual motorized microscope components and transfer of information from encoded components into the software. - Image acquisition with b/w, rgb, high-resolution and high-sensitivity cameras - HDR, Panorama, and manual Extended Depth of Focus (EDF) acquisitions - Basic image acquisition on electron microscopes - Image processing: standard operations for image optimization (contrast, brightness, gamma, colors, smoothing, sharpening, geometric corrections...) - Interactive/dimensional measurements, including online measurements on the live image - Input Form Designer with automated customer data import - Report creation and modification of Microsoft Word report templates using ZEN Word add-in - Data Archive for managing and maintaining documents: searching, filtering, tagging, viewing, re-opening, structuring, exporting, importing (any file format via drag n drop) - User Management for multi-user environment incl. full integration into the Windows multi-user functionality - Connectivity to ZEN Data Storage image database - Contains ZEN Connect basic functionality, 2D CAD overlay, topography viewer for 2.5D visualization of EDF Images incl. profile line measurement, QUAL Data Export - arivis Cloud connector enables the execution of customized solutions by integrating modules from the arivis Cloud platform Supported operating systems: Windows 10 / Windows 11 (64-Bit)

arivis Vision4D software for image processing

Item has been added to the configuration

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Recover

Item no.: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND (D)

Item Number: 410135-1053-380

ZEN desk 3.8 +ZEISS arivis Cloud Pack Industry 1 year IND Combined package of a ZEN Desk Software and a one-year temporary license for arivis Cloud to help researchers get started with AI tools for image analysis. This package is only valid for Biotech/Pharma customers. ZEN desk Software: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. See ZEN desk Software for functions included. The arivis Cloud license (formerly APEER) is valid for one-year and includes full access to the cloud-based Deep Learning toolset as well as to pre-built applications. With up to 7000 min of computing time per month (~30 DL trainings or ~700 segmentations) and 1 TB of storagecustomers can train robust AI models for image segmentation via powerful neural networks with more than 6 million parameters. The trained AI models can be used locally in ZEN or arivis Pro, or in the cloud to free up computing capacities of local workstations. Using this state-of-the-art technology allows more efficient workflows and best performance for various image analysis tasks.

Item has been added to the configuration

ZEN Desk 3.8 and arivis pro TL package (D)

Recover

Item no.: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package (D)

Item Number: 410135-1051-380

ZEN Desk 3.8 and arivis pro TL package Combined package of a ZEN desk base software and a two-year temporary license of arivis pro for 3D image visualization and data analysis to help researchers getting started with their image analysis. ZEN Desk: ZEN image processing under Windows 10 x64 allows offline processing and analysis without microscope control. ZEN desk is not time limited. This arivis pro (TL) temporary license is valid for two years and includes tools for 3D image visualization andimage rendering, 3D object analysis (volume, surface area, intensity, morphology parameters, object classification, etc..), colocalization analysis (object and pixel based), and machine learning for object segmentation and classification. It also includes tools for advanced analysis (quantification of object relationships, distances) and per cell or per compartment analysis. Furthermore, this package includes stitching tools, and many pre- processing tools for image enhancement. This special arivis pro (TL) package includes a (virtual) training and basic support (contact support-zeiss@arivis.com) with regular SW updates. The arivis pro (TL) package can only be sold together with a new microscopy system. After two years this time-limited license can be converted to a permanent license. Extensions with additional modules are possible any time (contact sales-zeiss@arivis.com).

Item has been added to the configuration

arivis Hub Implementation and configuration per day

Recover

Item no.: 000000-2559-523

arivis Hub Implementation and configuration per day

Item Number: 000000-2559-523

arivis Hub Implementation and configuration per day Days required for install, implementation, and configuration of new or upgraded arivis Hub system (one-time fee per install and upgrade) For new Academic arivis Hub systems, 4 implementation and configuration days pre charged for an onsite, installed demo system for 3 months. This implementation cost will not be charged again when the system is purchased.

Item has been added to the configuration

arivis VisionHub - Implementation and configuration, per hour (O)

Recover

Item no.: 000000-2559-522

arivis VisionHub - Implementation and configuration, per hour (O)

Item Number: 000000-2559-522

arivis VisionHub - Implementation and configuration, per hour (O) Hours required for install, implementation, and configuration of new or upgraded VisionHub system (one-time fee per install and upgrade)

Item has been added to the configuration

arivis Hub Validation Support per day - IND

Recover

Item no.: 000000-2559-521

arivis Hub Validation Support per day - IND

Item Number: 000000-2559-521

arivis Hub Validation Support per day - IND Days required for validation of new or upgraded arivis Hub system (one- time fee per install or upgrade). Validation requirements must be defined with customer prior to purchase.

Item has been added to the configuration

arivis Hub Image Analysis Consulting per hour - IND

Recover

Item no.: 000000-2559-520

arivis Hub Image Analysis Consulting per hour - IND

Item Number: 000000-2559-520

arivis Hub Image Analysis Consulting per hour - IND Hours required for dedicated support for consulting on image analysis strategy, pipeline and workflow evelopment, support and planning for image analysis on new projects, and scripting.

Services (1)

Installation costs, etc.

Item has been added to the configuration

Setup and Installation 0,5 days (O)

Recover

Item no.: 000000-2162-401

Setup and Installation 0,5 days (O)

Item Number: 000000-2162-401

Setup and Installation 0,5 days (O)

Packing and dust protection (2)

Dust covers

Item has been added to the configuration

Dust cover for Axio Observer / Axiovert 200/200M

Recover

Item no.: 459330-0000-000

Dust cover for Axio Observer / Axiovert 200/200M

Item Number: 459330-0000-000

Dust cover for Axio Observer / Axiovert 200/200M (L600xB420xH620 mm)

Cases for mechanical microscope accessories

Item has been added to the configuration

Storing case for 6 pieces of reflector modules P&C

Recover

Item no.: 000000-1766-630

Storing case for 6 pieces of reflector modules P&C

Item Number: 000000-1766-630

Storing case for 6 pieces of reflector modules P&C

PASCAL (1)

Various PASCAL accessories

Item has been added to the configuration

Test sample "Mirror"

Recover

Item no.: 453001-9062-000

Test sample "Mirror"

Item Number: 453001-9062-000

Test sample "Mirror"

System table (1)

System tables with vibration absorption

Item has been added to the configuration

System table , small, air damped, level unregulated

Recover

Item no.: 000000-2147-373

System table , small, air damped, level unregulated

Item Number: 000000-2147-373

System table , small, air damped, level unregulated long and short side open with breadboard, 900x750mm

Accessories for LSM 700 microscope (1)

Accessories inverted microscopes

Item has been added to the configuration

Anti vibration plate Cell Observer SD and LSM 800/900

Recover

Item no.: 400102-8317-000

Anti vibration plate Cell Observer SD and LSM 800/900

Item Number: 400102-8317-000

Anti-vibration plate Cell Observer SD and LSM 800/900 can be used to set up a Cell Observer SD or LSM 800/900 on undamped tables.

LSFM Components (1)

Lasermodule and Laser

Item has been added to the configuration

Trigger board µCon HS (PCI xPress) (D)

Recover

Item no.: 400100-9021-000

Trigger board µCon HS (PCI xPress) (D)

Item Number: 400100-9021-000

Trigger board µCon HS (PCI xPress) (D) with support of SDB. With high resolution AD/DA converter, for TTL trigger output and analysis. For control of Laser Bench Tower, Rack and Rack 3F, Z PIEZO with precise trigger control of up to two triggerable cameras.

Purchased parts for the LSFM (1)

Computer and accessories

Item has been added to the configuration

PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)

Recover

Item no.: 430039-9021-000

PC-Interface Microscope Var.1 and Trigger for Celldiscoverer (D)

Item Number: 430039-9021-000

PC Interface Microscope and Trigger for Celldiscoverer 7 (D) Trigger board for TTL trigger output and analysis. with precise trigger control of Celldiscoverer 7, LSM and up to two triggerable cameras.

Inverted microscope Axio Observer 3 for transmitted-light brightfield HAL, phase contrast Ph1 and PlasDIC