ZEISS Shop
Upright microscopes
Primostar 3
Primostar 3
Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50

Primostar 3

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50

Item no.: 415501-0031-001 (individual configuration)

Description

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50 Complete configuration with full-K...

Full description

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50

Item Number: 415501-0031-001 (individual configuration) Reset configuration

Tip

Please note that if an item is removed from or added to a preconfigured kit the full functionality can not be guaranteed!

The current configuration contains no more items and can not be added to the shopping cart.

Current configuration

Hide all Show all

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50

Recover

Item no.: 415501-0031-001

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50

Item Number: 415501-0031-001

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50 Complete configuration with full-Köhler stand including - transmitted-light slide-in modules with 6V 30W halogen lamp and LED 3W white light, 5600K - 5-position nosepiece, cod., tilted backwards - mechanical rackless stage 75x50, drive right and specimen holder for two slides, with spring clip left - binocular phototube 25°/22 (50:50) - eyepieces 10x/22 Br.foc. with eyecups - objective iPlan-Achromat 40x Ph2 - ABBE condenser 0.9with turret disk BF, DF, Ph1, Ph2, Ph3 - pinhole diaphragm, d=30mm - light manager - ECO-Mode - color filter set blue, green, yellow - 6V 30W halogen lamp (spare part) - Country-specific power cable - dust cover - 5 years warranty

Bulbs

0 added 0 removed

Polarization

0 added 0 removed

Tubes and accessories

0 added 0 removed

Video devices

0 added 0 removed

Eyepieces

0 added 0 removed

Eyepiece accessories

0 added 0 removed

Immersion oils

0 added 0 removed

Condensers

0 added 0 removed

Image processing

0 added 0 removed

Hide all Show all

There is no parts list for this product.

Add accessories
Suitable Accessories

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50
Item Number: 415501-0031-001 (individual configuration)
Microscope stands upright (0)

Training microscopes

Transmitted-light illumination (3)

Transmitted-light illumination

Item has been added to the configuration

Transmitted-light illumination with HAL 6V/30W for Primostar 3

Recover

Item no.: 415501-1201-000

Transmitted-light illumination with HAL 6V/30W for Primostar 3

Item Number: 415501-1201-000

Transmitted-light illumination with HAL 6V/30W for Primostar 3

Item has been added to the configuration

Transmitted-light illumination with LED white-light, 5600K for Primostar 3

Recover

Item no.: 415501-1200-000

Transmitted-light illumination with LED white-light, 5600K for Primostar 3

Item Number: 415501-1200-000

Transmitted-light illumination with LED white-light, 5600K for Primostar 3

Item has been added to the configuration

Attachable transmitted-light mirror for Primo Star fixed-Köhler

Recover

Item no.: 415500-1202-000

Attachable transmitted-light mirror for Primo Star fixed-Köhler

Item Number: 415500-1202-000

Attachable transmitted-light mirror for Primo Star fixed-Köhler

Reflected-light illumination (3)

Epi-fluorescence illumination for upright microscopes

Item has been added to the configuration

Reflected-light fluorescence illuminator iLED 470 nm for Primostar 3

Recover

Item no.: 415501-1822-000

Reflected-light fluorescence illuminator iLED 470 nm for Primostar 3

Item Number: 415501-1822-000

Reflected-light fluorescence illuminator iLED 470 nm for Primostar 3 including - LED module 470 nm - FL reflector module with filter set 09, optimized for FITC - yellow filter - special eyecup with light protection

Item has been added to the configuration

Reflected-light fluorescence illuminator iLED 455 nm for Primostar 3

Recover

Item no.: 415501-1820-000

Reflected-light fluorescence illuminator iLED 455 nm for Primostar 3

Item Number: 415501-1820-000

Reflected-light fluorescence illuminator iLED 455 nm for Primostar 3 including - LED module 455 nm - FL reflector module with filter set 67, optimized for Auramin - yellow filter - special eyecup with light protection

Fluorescence protection devices

Item has been added to the configuration

Special eyecup with light protection for Primo Star

Recover

Item no.: 415500-1819-000

Special eyecup with light protection for Primo Star

Item Number: 415500-1819-000

Special eyecup with light protection for Primo Star Also suited for eyepieces 10x/23 to Stemi 305, Stemi 508, SteREO Discovery and Axio Zoom - Set of two different eyecups (left/right) - To minimize disturbing light incidence - Not foldable, usable without eyeglasses only

Bulbs (1)

Halogen lamps

Item has been added to the configuration

Bulb 6V 30W Halogen for Primo

Recover

Item no.: 415500-1901-000

Bulb 6V 30W Halogen for Primo

Item Number: 415500-1901-000

Bulb 6V 30W Halogen for Primo

Polarization (2)

Analyzers

Item has been added to the configuration

Analyzer D for Primostar 3

Recover

Item no.: 415501-1806-000

Analyzer D for Primostar 3

Item Number: 415501-1806-000

Analyzer D for Primostar 3

Polarizers D

Item has been added to the configuration

Polarizer D for Primostar 3

Recover

Item no.: 415501-1805-000

Polarizer D for Primostar 3

Item Number: 415501-1805-000

Polarizer D for Primostar 3

Tubes and accessories (3)

Binocular tubes

Item has been added to the configuration

Binocular tube 25°/22 with integrated camera 8MP

Recover

Item no.: 415501-1403-000

Binocular tube 25°/22 with integrated camera 8MP

Item Number: 415501-1403-000

Binocular tube 25°/22 with integrated camera 8MP Camera specification Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080= Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.15 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Liveframe rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope) Digitization: 8-bit/pixel Integration time: 0.06 ms up to 1 s Interfaces for Communication: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Optical interface: integrated adapter Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx. 0.5 MB – 3.3MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Passive cooling by aluminium cooling fins on the cover plate Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required Operating systems for Labscope: Windows 7/10 x64 Prof./Ultimate and iOS v11 and higher/Android 9.0 and higher Supported Application Software: Labscope v4.0 (Win, iOS and Android) and later and higher The camera is network-enabled and can be used with the ZEISS iOS App/Android App on Google or Zeiss Portal and Labscope software. The App is available as a free download from the Apple® App Store or GoogleStore. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple® iPad Pro® iPhone® are registered trademarks of Apple Inc.

Item has been added to the configuration

Binocular phototube 25°/22 (50:50) for Primostar 3, reversed image

Recover

Item no.: 415501-1402-000

Binocular phototube 25°/22 (50:50) for Primostar 3, reversed image

Item Number: 415501-1402-000

Binocular phototube 25°/22 (50:50) for Primostar 3, reversed image

Item has been added to the configuration

Binocular phototube 25°/20 (50:50) for Primostar 3, reversed image

Recover

Item no.: 415501-1401-000

Binocular phototube 25°/20 (50:50) for Primostar 3, reversed image

Item Number: 415501-1401-000

Binocular phototube 25°/20 (50:50) for Primostar 3, reversed image

Video devices (2)

Other video adapters

Item has been added to the configuration

Camera Adapter P95-C 1/2" 0.5x for Primostar 3

Recover

Item no.: 415501-1811-000

Camera Adapter P95-C 1/2" 0.5x for Primostar 3

Item Number: 415501-1811-000

Camera Adapter P95-C 1/2" 0.5x for Primostar 3

Item has been added to the configuration

Camera Adapter P95-C 2/3" 0.65x for Primostar 3

Recover

Item no.: 415501-1810-000

Camera Adapter P95-C 2/3" 0.65x for Primostar 3

Item Number: 415501-1810-000

Camera Adapter P95-C 2/3" 0.65x for Primostar 3

Eyepieces (5)

Auxiliary microscopes

Item has been added to the configuration

Auxiliary microscope, d=30

Recover

Item no.: 444830-9902-000

Auxiliary microscope, d=30

Item Number: 444830-9902-000

Auxiliary microscope, d=30 to adjust the phase rings and darkfield stop in the condenser

Eyepieces for spectacle wearers, focusing, 10x

Item has been added to the configuration

Eyepiece WF 10x/22 Br. foc. with micrometer 10:100 for Primostar 3

Recover

Item no.: 415501-1521-000

Eyepiece WF 10x/22 Br. foc. with micrometer 10:100 for Primostar 3

Item Number: 415501-1521-000

Eyepiece WF 10x/22 Br. foc. with micrometer 10:100 for Primostar 3

Item has been added to the configuration

Eyepiece WF 10x/20 Br. foc. with pointer for Primostar 3

Recover

Item no.: 415501-1510-000

Eyepiece WF 10x/20 Br. foc. with pointer for Primostar 3

Item Number: 415501-1510-000

Eyepiece WF 10x/20 Br. foc. with pointer for Primostar 3

Item has been added to the configuration

Eyepiece WF 10x/22 Br. foc. for Primostar 3

Recover

Item no.: 415501-1501-000

Eyepiece WF 10x/22 Br. foc. for Primostar 3

Item Number: 415501-1501-000

Eyepiece WF 10x/22 Br. foc. for Primostar 3

Item has been added to the configuration

Eyepiece WF 10x/20 Br. foc. for Primostar 3

Recover

Item no.: 415501-1500-000

Eyepiece WF 10x/20 Br. foc. for Primostar 3

Item Number: 415501-1500-000

Eyepiece WF 10x/20 Br. foc. for Primostar 3

Eyepiece accessories (4)

Stops (D)

Item has been added to the configuration

Pinhole diaphragm, d=30mm

Recover

Item no.: 444020-0000-000

Pinhole diaphragm, d=30mm

Item Number: 444020-0000-000

Pinhole diaphragm, d=30mm

Pointer for eyepieces

Item has been added to the configuration

Pointer for eyepieces foc. for Primostar 3

Recover

Item no.: 415501-1906-000

Pointer for eyepieces foc. for Primostar 3

Item Number: 415501-1906-000

Pointer for eyepieces foc. for Primostar 3

Various eyepiece accessories

Item has been added to the configuration

Micrometer 10:100, d=25 mm, for Primostar 3

Recover

Item no.: 415501-1815-000

Micrometer 10:100, d=25 mm, for Primostar 3

Item Number: 415501-1815-000

Micrometer 10:100, d=25 mm, for Primostar 3

Item has been added to the configuration

Eyepiece WF 10x/22 Br. foc. with pointer for Primostar 3

Recover

Item no.: 415501-1520-000

Eyepiece WF 10x/22 Br. foc. with pointer for Primostar 3

Item Number: 415501-1520-000

Eyepiece WF 10x/22 Br. foc. with pointer for Primostar 3

Transmitted-light objectives (15)

Plan-Achromat Phase Contrast

Item has been added to the configuration

Objective iPlan-Achromat 100x/1.25 Oil Ph3 for Primostar 3

Recover

Item no.: 415501-1645-000

Objective iPlan-Achromat 100x/1.25 Oil Ph3 for Primostar 3

Item Number: 415501-1645-000

Objective iPlan-Achromat 100x/1.25 Oil Ph3 for Primostar 3 (WD=0.27mm) Immersion oil, 5ml is included in delivery.

Item has been added to the configuration

Objective iPlan-Achromat 40x/0.65 Ph2 for Primostar 3

Recover

Item no.: 415501-1635-000

Objective iPlan-Achromat 40x/0.65 Ph2 for Primostar 3

Item Number: 415501-1635-000

Objective iPlan-Achromat 40x/0.65 Ph2 for Primostar 3 (WD=0.66mm)

Item has been added to the configuration

Objective iPlan-Achromat 20x/0.45 Ph2 for Primostar 3

Recover

Item no.: 415501-1625-000

Objective iPlan-Achromat 20x/0.45 Ph2 for Primostar 3

Item Number: 415501-1625-000

Objective iPlan-Achromat 20x/0.45 Ph2 for Primostar 3 (WD=1.00mm)

Item has been added to the configuration

Objective iPlan-Achromat 10x/0.25 Ph1 for Primostar 3

Recover

Item no.: 415501-1615-000

Objective iPlan-Achromat 10x/0.25 Ph1 for Primostar 3

Item Number: 415501-1615-000

Objective iPlan-Achromat 10x/0.25 Ph1 for Primostar 3 (WD=18.4mm)

Plan-Achromat BrightField

Item has been added to the configuration

Objective iPlan-Achromat 100x/1.25 D=0 Oil for Primostar 3

Recover

Item no.: 415501-1642-000

Objective iPlan-Achromat 100x/1.25 D=0 Oil for Primostar 3

Item Number: 415501-1642-000

Objective iPlan-Achromat 100x/1.25 CG=0 Oil for Primostar 3 (WD=0.30mm), incl. Immersion oil, 5ml

Item has been added to the configuration

Objective iPlan-Achromat 100x/1.25 Oil for Primostar 3

Recover

Item no.: 415501-1641-000

Objective iPlan-Achromat 100x/1.25 Oil for Primostar 3

Item Number: 415501-1641-000

Objective iPlan-Achromat 100x/1.25 Oil for Primostar 3 (WD=0.27mm), incl. Immersion oil, 5 ml

Item has been added to the configuration

Objective iPlan-Achromat 100x/0.8 dry for Primostar 3

Recover

Item no.: 415501-1640-000

Objective iPlan-Achromat 100x/0.8 dry for Primostar 3

Item Number: 415501-1640-000

Objective iPlan-Achromat 100x/0.8 dry for Primostar 3 (WD=1.87mm)

Item has been added to the configuration

Objective iPlan-Achromat 40x/0.65 D=0 for Primostar 3

Recover

Item no.: 415501-1631-000

Objective iPlan-Achromat 40x/0.65 D=0 for Primostar 3

Item Number: 415501-1631-000

Objective iPlan-Achromat 40x/0.65 CG=0 for Primostar 3 (WD=0.62mm)

Item has been added to the configuration

Objective iPlan-Achromat 50x/1.0 Oil D=0 for Primostar 3

Recover

Item no.: 415501-1630-000

Objective iPlan-Achromat 50x/1.0 Oil D=0 for Primostar 3

Item Number: 415501-1630-000

Objective iPlan-Achromat 50x/1.0 Oil CG=0 for Primostar 3 (WD = 0.27 mm) incl. Immersion oil, 5ml

Item has been added to the configuration

Objective iPlan-Achromat 20x/0.45 for Primostar 3

Recover

Item no.: 415501-1622-000

Objective iPlan-Achromat 20x/0.45 for Primostar 3

Item Number: 415501-1622-000

Objective iPlan-Achromat 20x/0.45 for Primostar 3 (WD=1.03mm)

Item has been added to the configuration

Objective iPlan-Achromat 20x/0.45 D=0 for Primostar 3

Recover

Item no.: 415501-1621-000

Objective iPlan-Achromat 20x/0.45 D=0 for Primostar 3

Item Number: 415501-1621-000

Objective iPlan-Achromat 20x/0.45 CG=0 for Primostar 3 (WD=1.0mm)

Item has been added to the configuration

Objective iPlan-Achromat 40x/0.65 for Primostar 3

Recover

Item no.: 415501-1620-000

Objective iPlan-Achromat 40x/0.65 for Primostar 3

Item Number: 415501-1620-000

Objective iPlan-Achromat 40x/0.65 for Primostar 3 (WD=0.66mm)

Item has been added to the configuration

Objective iPlan-Achromat 10x/0.25 D=0 for Primostar 3

Recover

Item no.: 415501-1611-000

Objective iPlan-Achromat 10x/0.25 D=0 for Primostar 3

Item Number: 415501-1611-000

Objective iPlan-Achromat 10x/0.25 CG=0 for Primostar 3 (WD=17.47mm)

Item has been added to the configuration

Objective iPlan-Achromat 10x/0.25 for Primostar 3 D= - (WD=17.5mm)

Recover

Item no.: 415501-1610-000

Objective iPlan-Achromat 10x/0.25 for Primostar 3 D= - (WD=17.5mm)

Item Number: 415501-1610-000

Objective iPlan-Achromat 10x/0.25 for Primostar 3 D= - (WD=17.5mm)

Item has been added to the configuration

Objective iPlan-Achromat 4x/0.10 for Primostar 3 (WD=30.7mm)

Recover

Item no.: 415501-1600-000

Objective iPlan-Achromat 4x/0.10 for Primostar 3 (WD=30.7mm)

Item Number: 415501-1600-000

Objective iPlan-Achromat 4x/0.10 for Primostar 3 (WD=30.7mm)

Immersion oils (3)

Immersion oil N

Item has been added to the configuration

Immersion oil Immersol 518 N, bottle 500 ml

Recover

Item no.: 000000-1111-809

Immersion oil Immersol 518 N, bottle 500 ml

Item Number: 000000-1111-809

Immersion oil Immersol 518 N, bottle 500 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 N, bottle 100 ml

Recover

Item no.: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml

Item Number: 000000-1111-807

Immersion oil Immersol 518 N, bottle 100 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Item has been added to the configuration

Immersion oil Immersol 518 N, oiler 20 ml

Recover

Item no.: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml

Item Number: 000000-1111-806

Immersion oil Immersol 518 N, oiler 20 ml (ISO 8036-1, ne=1.518 (23°C), halogen-free)

Accessories for objectives (2)

Microscope slides

Item has been added to the configuration

Microscope slide set TL brightfield

Recover

Item no.: 474032-9040-000

Microscope slide set TL brightfield

Item Number: 474032-9040-000

Microscope slide set TL brightfield including: - hazel - lily of the valley - taste buds, rabbit tongue - small intenstine, frog - Embryo of mouse, sagittal

Cleaning paper

Item has been added to the configuration

Box of lens cleaning paper (300 sheets)

Recover

Item no.: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Item Number: 462975-0000-000

Box of lens cleaning paper (300 sheets)

Condensers (4)

Stop slider

Item has been added to the configuration

Dark-field slider 0.40-0.65 for Primostar 3

Recover

Item no.: 415501-1802-000

Dark-field slider 0.40-0.65 for Primostar 3

Item Number: 415501-1802-000

Dark-field slider 0.40-0.65 for Primostar 3 for objectives with aperture 0.40-0.65

Item has been added to the configuration

Slider BF/Ph2 for Primostar 3

Recover

Item no.: 415501-1800-000

Slider BF/Ph2 for Primostar 3

Item Number: 415501-1800-000

Slider BF/Ph2 for Primostar 3

Item has been added to the configuration

Slider H, Ph1, Ph2, Ph3 for Primo Star

Recover

Item no.: 415500-1826-000

Slider H, Ph1, Ph2, Ph3 for Primo Star

Item Number: 415500-1826-000

Slider H, Ph1, Ph2, Ph3 for Primo Star

Condenser, PH

Item has been added to the configuration

ABBE condenser 0.9 with turret disk BF, DF, Ph1, Ph2, Ph3

Recover

Item no.: 415501-1700-000

ABBE condenser 0.9 with turret disk BF, DF, Ph1, Ph2, Ph3

Item Number: 415501-1700-000

ABBE condenser 0.9 with turret disk BF, DF, Ph1, Ph2, Ph3

Computer and accessories (4)

Various computer accessories

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language English US (O)

Recover

Item no.: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item Number: 000000-0626-267

Keyboard, USB, Design "Business Slim", Language English US (O)

Item has been added to the configuration

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Recover

Item no.: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O)

Item Number: 000000-0626-248

Cable, High-Speed-HDMI-Cable, Premium, black, 2m (O) Cable, High-Speed-HDMI-Cable, Premium, Resolution 4K, HDMI connector A to HDMI connector A, black, 2m

Item has been added to the configuration

Mouse, Optical USB-Scroll Mouse (O)

Recover

Item no.: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item Number: 000000-0626-246

Mouse, Optical USB-Scroll Mouse (O)

Item has been added to the configuration

Keyboard, USB, Design "Business Slim", Language German (O)

Recover

Item no.: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Item Number: 000000-0626-245

Keyboard, USB, Design "Business Slim", Language German (O)

Image processing (22)

Camera accessories

Item has been added to the configuration

Wi-Fi adapter package (O)

Recover

Item no.: 426570-9110-000

Wi-Fi adapter package (O)

Item Number: 426570-9110-000

Wi-Fi adapter package (O) consisting of Wireless Network Adapter and USB Adapter USB Type-C to Type-A Technical specification: Frequency: 2.4 GHz Transmission: 400 Mbps Antenna: Built-in 2dBi Transmit power: 18 dBm Interface: USB 3.0 Standard: IEEE802.11a/b/g/n

CCD cameras

Item has been added to the configuration

Microscopy Camera Axiocam 202 mono

Recover

Item no.: 426570-9011-000

Microscopy Camera Axiocam 202 mono

Item Number: 426570-9011-000

Microscopy Camera Axiocam 202 mono Most versatile monochrome camera for education, documentation and routine applications with standalone capability, USB 3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope5/7/Vario and, - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Monochrome, Global Shutter Number of Pixel: 1920 (H) x 1080 (V) = 2MP, Full HD (1080p) Selectable Resolution: 1920 x 1080 = Full HD (1080p) Pixel size: 5.86 µm x 5.86 µm Effective Area: 11.25 mm x 6.33 mm, equivalent to 1/1.23" (13 mm diagonal) Spectral range: approx. 350 nm – 850 nm, protection glass (coated) Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 1080p Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 1920 x 1080 up to 30 fps (Labscope, ZEN) Digitization: 12-bit or 8-bit A/D conversion Integration time: 0.30 ms up to 2 s Gain: 1x - 16x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flash drive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface:C-mount Max. file size per image: 12 bit .tiff: 4 MB (one channel, not content dependent) 8 bit .tiff: 2 MB (one channel, not content dependent) 8 bit .jpg: approx. 0.1 MB – 1.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC, 0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating Systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS 13 and higher, Android 9.0 and higher Supported Application Software: ZEN 3.0 (blue edition) or higher ZEN core v2.7 or higher Labscope v2.9.1 and higher (Windows), v3.0 and higher (iOS) , v4.0 and higher (Android) TWAIN Plugin (Software interface to control camera by 3rd party application software) The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are Not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 208 color

Recover

Item no.: 426570-9001-000

Microscopy Camera Axiocam 208 color

Item Number: 426570-9001-000

Microscopy Camera Axiocam 208 color Most versatile color camera for education, documentation and routine applications with standalone capability, USB3.0 and Ethernet connectivity with 64bit driver software for: ZEN (blue and core), Labscope and TWAIN plugin. Camera package contains the following accessories: - USB 3.0 hub Type-C, - USB 3.0 flash drive, Type-C and Type-A - USB 3.0 cable Type-C to Type-A - Power <(>&<)> signal cable camera to microscope stand compatible with Axiolab 5 and Axioscope 5/7/Vario - Power adapter with country-specific plug Sensor: Sony CMOS image sensor Color, Rolling Shutter Number of Pixel: 3840 (H) x 2160 (V) = 8.3MP, Ultra HD (4K) Selectable Resolution: 3840 x 2160 = Ultra HD (4K) and 1920 x 1080 = Full HD (1080p) Pixel size: 1.85 µm x 1.85 µm Effective Area: 7.1 mm x 4.0 mm, equivalent to 1/2.1" (8.1 mm diagonal) Spectral range: approx. 400 nm – 700 nm, IR filter; RGB Bayer color mask Control buttons on camera for stand-alone use: 1x Image capture 1x OSD (On Screen Display menu) 1x Camera factory reset Status-LED for camera: color coded operation status Stand-alone: Image storage format: TIFF or JPG Video stream format: mp4 Live frame rate via HDMI: 30 fps @ 4K/1080p (also with HDR) Live frame rate through software via Ethernet or USB 3.0 (depending on hardware and software configuration), Exp. Time 1 ms: H x V Frame rate 3840 x 2160 up to 15 fps (ZEN blue edition) 1920 x 1080 up to 27 fps (ZEN blue edition) 1920 x 1080 up to 30 fps (Labscope) Digitization: 24-bit (3 x 8-bit RGB) A/D conversion Integration time: 0.06 ms up to 1 s Gain: 1x - 22x Interfaces for Communication and for Power: HDMI for monitor USB 3.0 Type C for USB hub, flashdrive, Wi-Fi adapter or, PC connection Ethernet (RJ45) for LAN connection Micro-D for power and communication with dedicated stands Optical interface: C-mount Max. file size per image: .tiff up to: 24 MB (not content dependent) .jpg up to: approx.0.5 MB – 3.3 MB (content dependent) Size/Weight: approx. 135 x 97 x 54mm / 590 g Housing: blue painted aluminum and cooling fins on the top plate Registration: CE, RoHS, CSA Power supply: via Micro-D interface Power consumption: 9 W (24 V DC,0.375 A) Environmental conditions: +10°C to +40°C, max. 75% relative air humidity at 35°C, no condensation, free air circulation required, indoor use Supported Operating systems: for ZEN: Windows 10 x64 and higher for Labscope: Windows 10 x64 and higher, iOS v11 and higher, Android 9.0 and higher Supported Application Software: ZEN v3.0 (blue edition) and higher ZEN core v2.7 and higher Labscope v2.9.1 and higher (Windows)/ v2.8.3 and higher (iOS), v4.0 and higher (Android) TWAIN plugin: Software interface to control camera by 3rd party application software The camera is network-enabled and can be used with the ZEISS iOS App, Android APP and ZEISS Labscope software. The Apps are available as a free download from the Apple® App Store, Google Play Store or ZEISS Portal. Unless otherwise stated by the distributor, iPad® and WLAN router are not supplied by ZEISS. Apple®, Apple iPad® are registered trademarks of Apple Inc.

Item has been added to the configuration

Microscopy Camera Axiocam 105 color R2

Recover

Item no.: 426555-9010-000

Microscopy Camera Axiocam 105 color R2

Item Number: 426555-9010-000

Microscopy Camera Axiocam 105 color R2 with driver software 64bit, USB 3.0 connection cable 3.0 m Sensor: CMOS color sensor Basic resolution: 2592 (H) x 1944 (V) = 5.0 Megapixel Pixel size: 2.2 µm x 2.2 µm Chip size: 5.70 mm x 4.28 mm, equivalent to 1/2.24" (diagonal 7.13 mm) Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 30fps Frame rates for time series recording (depending on hardware and software configuration): H x V Frame Rate@1ms 2592 x 1944 17fps Readout of Sensor Sub- Regions ("ROI"): Adjustable (min. ROI: H x V: 864 x 1) Digitization: 3 x 8 Bit / Pixel Integration Time: 30 µs up to 1 s Interface (camera): USB 3.0 Micro-B Interface (PC / board): USB 3.0 Standard A Spectral range: Approx. 400 nm - 650 nm, IR filter Read-out mode: Progressive Optical Interface: C-Mount (adapter 0.5x recommended) Size / Weight: approx. 2.9 cm x 2.9 cm x 1.7 cm / approx. 60 g Housing: Zinc Alloy, Zinc Z410 Registration: CE, FCC Class B, RoHS Power Supply: via USB 3.0 interface, max. 0.5 - 1 W (5 V, max. 400mA) Environmental conditions: 0° ... +50° Celsius, max. 80% relative air humidity, no condensation, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.5 (Hotfix 5, blue edition) or higher, ZEN core v3.4 (Hotfix 4) or higher The required application software is available via the ZEISS Download Center.

Item has been added to the configuration

AxioCam ERc 5s Rev.2 Accessory Kit

Recover

Item no.: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit

Item Number: 426540-0003-000

AxioCam ERc 5s Rev.2 Accessory Kit for the use of camera without PC. Consisting of: - Power supply: USB 2.0, 5V/1A; 100...240VAC/50...60Hz with country-specific adapters - Cable: HDMI to DVI-D cable 3m - Memory card: SDHC 4GB with protection case - SD/MMC CardReaderWriter 6in1, USB 2.0 - IR Remote Control

Computers

Item has been added to the configuration

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Recover

Item no.: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O)

Item Number: 410350-2407-000

Monitor TFT 24" HP Z24n G3 (61 cm) (O) Visible diagonal: 61 cm, 16:10 Maximum resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 350 nits Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree Video input: DisplayPort 1.2, HDMI 1.4 Data connectors: 1 x USB Type B (upstream), 4 x SuperSpeed USB Type-A 5Gbps Power consumption: Maximum 63 W, Typical 28 W, Standby 0.5 W Dimensions incl. stand (H x W x D): 52.1 cm x 53.2 cm x 19.5 cm Weight incl. stand: 4.9 kg Ergonomic features:Tilt: -5°to +20°, Swivel: -45° to +45°, Height adjustable 15 cm, Pivot rotation: -90° to +90° Certification and compliance: CE, CB, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Recover

Item no.: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O)

Item Number: 410350-2406-000

Monitor TFT 24" HP Z24n G2 (61 cm) (O) Visible diagonal: 60.96 cm, 16:10 Max. resolution: 1920 x 1200 pixel @ 60 Hz Brightness: 300 cd/m2 Contrast: 1000:1 Viewing angle: horizontal 178 degree, vertical 178 degree 3 x Video input: DisplayPort 1.2, DVI-D, HDMI 1.4 3 x USB 3.0, 2 x USB 3.1 Type-C Power consumption: Maximum 92 W, Typical 40 W, Power Saving 0.5 W Dimensions with stand (H x W x D): 50.3 cm x 53.2 cm x 21.4 cm Weight: 7.2 kg (incl. stand) Ergonomic features: Tilt: -5°to +22°, swivel: -45° to +45°, height adjustable 15 cm, Pivot rotation 90° Certification and compliance: CE, CSA, GS, TÜV, FCC, TCO Operating voltage: 100-240 V, country-specific power cable

Item has been added to the configuration

Graphics Card NVIDIA T1000 8 GB mDP (O)

Recover

Item no.: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O)

Item Number: 410331-2700-000

Graphics Card NVIDIA T1000 8 GB mDP (O) Professional graphics card for Microscopy Workstation - 8 GB GDDR6 memory - PCI Express 3.0 Interface x16 - Hardware acceleration of DirectX 12.07, OpenGL 4.68 and CUDA - Support for up to four displays - Display outputs: 4 x MiniDisplayPort 1.4 (mDP) - DisplayPort support for 4 x 32" Display (3840 x 2160 Pixel)

Item has been added to the configuration

SSD 2 TB M.2 NVMe, additional (O)

Recover

Item no.: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O)

Item Number: 410323-1002-000

SSD 2 TB M.2 NVMe, additional (O) - data storage with high performance for data handling with high bandwidth requirement - maximum count per workstation: 1; 2nd SATA harddisk 8 TB required - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Recover

Item no.: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O)

Item Number: 410303-6400-000

Memory 64 GB (1x64) DDR4-2933 MHz ECC reg RAM (hp Z6 G4 Rev. 2) (O) consisting of 1 x 64 GB module - DDR4 2933 MHz ECC registered DIMM - can be extended to 128 GB (2 x 410303-6400-000), 256 GB (4 x 410303-6400-000) or 384 GB (6 x 410303-6400-000) - only for 410203-9912-000 Microscopy Workstation Premium hp Z6 G4 Rev. 2

Item has been added to the configuration

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Recover

Item no.: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O)

Item Number: 410220-0500-000

Processor Intel Core i7-12700K (HP Z2 G9) (O) High performance processor configuration - Intel Core i7-12700K (3.6 GHz 25 MB cache 12 cores (8 performance + 4 efficient) 20 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Recover

Item no.: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O)

Item Number: 410220-0400-000

Processor Intel Core i5-12500 (HP Z2 G9) (O) Default processor configuration - Intel Core i5-12500 (3.0 GHz 18 MB cache 6 cores 12 threads) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Microscopy Workstation Compact HP Z2 G9 (O)

Recover

Item no.: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O)

Item Number: 410201-9913-000

Microscopy Workstation Compact HP Z2 G9 (O) - HP Z2 Tower G9 Workstation - Chipset: Intel W680 - Memory Expansion Slots: 4 x DDR5-RAM modules, 4400MHz - Memory: max. 128 GB RAM - PCI Express Connectors: 1x PCI Express Generation 5 x16 1x PCIExpress Generation 3 x4 (x16 connector) 1x PCI Express Generation 3 x4 1x PCI Express Generation 3 x1 (x4 connector) - Graphics Card onboard: Intel UHD Graphics 770 2 x Display Port 1.4 (max. 3840 x 2160 Pixel) - SSD: 1 x 512 GB M.2 NVMe - Hard disks: 1 x 8 TB SATA 7200 rpm - Network controller: 1 x GbE LAN interface (RJ 45) - USB: 4 x Type-A SuperSpeed USB 10 Gbps (front) 2 x Type-A SuperSpeed USB 10 Gbps, 1 x Type-A SuperSpeed USB 5 Gbps, 3 x Hi-Speed USB 480 Mbps (rear) - Certifications and Declarations: CE, CSA, UL, FCC, CCC, KCC - Power Supply 700W, wide-ranging with country specific plug - Chassis Dimensions: (H x W x D): 356 x 169 x 385 mm - USB Mouse - Rescue Kit

Item has been added to the configuration

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-6401-000

Memory 64 GB (2x32) DDR5-4800 (HP Z2 G9) (O) consisting of 2 x 32 GB modules - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to max. 128 GB (2 x 410201-6401-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Recover

Item no.: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O)

Item Number: 410201-1606-000

Memory 16 GB (1x16) DDR5-4800 (HP Z2 G9) (O) consisting of 1 x 16 GB module - DDR5 4800 MHz nonECC unbuffered DIMM - can be extended to 32GB (2 x 410201-1606-000) or 64 GB (4 x 410201-1606-000) - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 5d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O)

Item Number: 000000-2561-501

System Configuration 5d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 800, LSM 800 MPLX Upgr., LSM 900, LSM 980, Elyra 7, Celldiscoverer 7, Axioscan 7, Lattice Lightsheet 7 and Widefield Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 4d for HP Z6 G4 (O)

Recover

Item no.: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O)

Item Number: 000000-2561-500

System Configuration 4d for HP Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for Lightsheet Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 3d for Z6 G4 (O)

Recover

Item no.: 000000-2561-499

System Configuration 3d for Z6 G4 (O)

Item Number: 000000-2561-499

System Configuration 3d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Installation of ZEN Software for LSM 700, LSM 780, LSM 880 and Elyra Systems - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

System Configuration 1d for Z6 G4 (O)

Recover

Item no.: 000000-2548-757

System Configuration 1d for Z6 G4 (O)

Item Number: 000000-2548-757

System Configuration 1d for Z6 G4 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License Without ZEN Software Installation - only for 410203-9912-000 Workstation Premium ZEISS 60A R2 (hp Z6 G4) and 410203-9911-000 Workstation Premium ZEISS 60A (hp Z6 G4)

Item has been added to the configuration

ystem Configuration 3 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-755

ystem Configuration 3 for HP Z2 G9 (O)

Item Number: 000000-2548-755

System Configuration 3 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - installation of ZEN Software for LSM 700 Systems - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 2 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O)

Item Number: 000000-2548-754

System Configuration 2 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - with system integration and ZEN software installation for respective system - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Item has been added to the configuration

System Configuration 1 for HP Z2 G9 (O)

Recover

Item no.: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O)

Item Number: 000000-2548-753

System Configuration 1 for HP Z2 G9 (O) Installation of Windows 10 IoT Enterprise LTSC 2021 x64 incl. Windows 10 License - without ZEN Software Installation - only for 410201-9913-000 Microscopy Workstation Compact HP Z2 G9

Software for image processing (8)

Labscope modules

Item has been added to the configuration

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Recover

Item no.: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D)

Item Number: 410136-1151-100

Axiocam 305 color Package with Labscope Module Fast Panorama (D) consisting of the camera Axiocam 305 color and the Labscope Module Fast Panorama. Camera specification: Microscopy camera incl. driver software 64bit, USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and IR barrier filter Hoya C5000 (coated) Number of Pixels: 2464 (H) x 2056 (V) = 5.07 Mega pixel color Sensor type: SONY IMX264 Exmor Pregius Global Shutter CMOS Pixel size: 3.45 μm x 3.45 μm Chip size: 8.5 mm x 7.1 mm, equivalent to 2/3" (diagonal 11.1 mm) Spectral range: With IR barrier filter app. 400 nm to 720 nm Full Well Capacity: Approx. 10,500 e Selectable Resolution: H x V Binning Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 816 x 684 3x3 608x 514 4x4 480 x 410 5x5 H x V Subsampling Factor 2464 x 2056 1x1 Basic Resolution 1232 x 1028 2x2 Live frame rates (depending on hardware and software configuration): H x V Frame Rate@1ms 2464 x 2056 36 fps 1232 x 1028 88 fps (2x2 Subsampling) Frame rates for time series recording (depending on computer hardware and software configuration) H x V(ROI) Frame Rate 2464 x 2056 36 fps 2048 x 2048 36 fps 1920 x 1080 67 fps 1024 x 1024 70 fps 512 x 512 136 fps 256 x 256 255 fps 128 x 128 456 fps Readout of Sensor Sub-Regions ("ROI"): Adjustable Digitization: 8 and 12 Bit / Pixel Dynamic Range: Typical > 4800 : 1 (>73 dB) at typ. 2.2 e readout noise Dark current: <(><<)> 1.0 e/p/s @ 25°C Integration Time: 0.1 ms to to 4 s Cooling: Temperature stable @ 25°C for ambient temperatures between 18°C and 30°C Status-LED for Camera: color coded operation status, dimmable, Interface (camera): USB 3.0 interface Optional operation with USB 2.0connection at reduced frame rate Optical Interface: C-Mount Thread depth for objectives: max. 5 mm Size / Weight: approx. App. 10.8 cm x 7.8 cm x 4.3 cm (2.3"x3.2"x1.7") / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4" photo thread for tripod mount Registration: CE Power Supply: Max. 4W, power supply provided by USB 3.0 bus for camera electronics Environmental conditions: 5° … +35° Celsius, max 80% relative air humidity, not condensing, free air circulationrequired Supported Operating Systems: for ZEN: Windows 10 x64 for Labscope: Windows 10 x64 Supported Application Software: ZEN 2.3 (blue edition) or later, ZEN core v2.5 or later Labscope v3.3 or later (Windows) The required software is available via the ZEISS Download Center.

Item has been added to the configuration

Labscope Module AI Cell Counting DLic

Recover

Item no.: 410136-0150-100

Labscope Module AI Cell Counting DLic

Item Number: 410136-0150-100

Labscope Module AI Cell Counting DLic The Labscope module AI Cell Counting is an AI based solution that automatically determines the number of adherent cells in the field of view. It delivers repeatable, objective results and does not require manual parameter adjustments. - push-button solution - analysis result within seconds - works for live images and stored images - accumulation of multiple images possible - numeric and visual result Observation type: Primarily optimized for phase contrast images of adherent cell cultures

Item has been added to the configuration

Labscope Module AI Cell Confluency DLic

Recover

Item no.: 410136-0149-100

Labscope Module AI Cell Confluency DLic

Item Number: 410136-0149-100

Labscope Module AI Cell Confluency DLic The Labscope module AI Cell Confluency is an AI based solution that automatically determines the confluency level of the adherent cell culture. It delivers repeatable, objective results and does not require manual parameter adjustments. - push-button solution - analysis result within seconds - works for live images and stored images - accumulation of multiple images possible - numeric and visual result Observation type: Primarily optimized for phase contrast images of adherent cell cultures

Item has been added to the configuration

Labscope Module Fast Panorama DLic

Recover

Item no.: 410136-0130-100

Labscope Module Fast Panorama DLic

Item Number: 410136-0130-100

Labscope Module Fast Panorama DLic The Labscope module Fast Panorama allows the easy acquisition of whole slide images (WSI) with manual microscopes. By manually moving the stage, images of the specimen will be stitched together automatically into a panoramic image. - flexible in sample - flexible in magnification and objective class - flexible in contrast methods - shading correction - improved stitching - position search function Notice: Currently the function works with ZEISS Axiocam305 only. FL (fluorescence light) mode is not suitable for Fast Panorama acquisition. The required PC spec: i5 (8th Gen) quad-core @3.0GHz or above; 8GB RAM or above.

Item has been added to the configuration

Labscope Module Multi Channel DLic

Recover

Item no.: 410136-0129-100

Labscope Module Multi Channel DLic

Item Number: 410136-0129-100

Labscope Module Multi Channel DLic The Labscope module Multi Channel Fluorescence (MCF) provides an easy solution for acquisition of fluorescence and transmitted light images in independent channels. - acquisition of up to 4 fluorescence channels + 1transmitted light channel - smart fluorescence channel overwrite - easy fluorescence channels setup with manual microscopes - compatibility with Smart Microscopy - multichannel view including image processing - report generation with MCF images

Item has been added to the configuration

Labscope Teacher 2.0

Recover

Item no.: 410135-0030-200

Labscope Teacher 2.0

Item Number: 410135-0030-200

Labscope Teacher 2.0 Labscope Teacher 2.0 is a licensed server SW for digital classroom management and interactive teaching and learning, it provides the following features: - Broadcast of teachers microscope view to students in real time - Chat function for text and emojis - Shared class folders for easy file sharing and storage - Students can use any iOS, Android or Windows device to participate in class - Teachers use a SW Labscope Teacher on a Windows device Note: The Labscope Teacher installation consists of two parts: the server part and the teacher client part. You can install both on the same PC/laptop or install the server part on a PC and the teacher client on a laptop. The licence must be activated viathe licence management tool on the server part of the PC/laptop. For the required PC specifications and other details, please refer to the product information or the Quick Installation Guide.

Labscope - Basic Software

Item has been added to the configuration

Labscope 4.2 for Windows (O)

Recover

Item no.: 410135-0052-420

Labscope 4.2 for Windows (O)

Item Number: 410135-0052-420

Labscope 4.2 for Windows (O) Labscope for Windows is a software used to control and acquire images through connected and compatible microscopes. This combined system is used for in-vitro examination of images to obtain information about physiological orpathological processes or conditions. Labscope for Windows is intended for the use of professional users, among others in the field of life science, cytology and pathology. The connected microscopes are themselves CE-IVD products. For IVD examinations, ensure that the displayed image on the monitor shows the equivalent information as visible through the eyepieces of the microscope. Labscope AI modules "AI Cell Confluency" and "AI Cell Counting" are not intended for IVD examinations and may only beused in research. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Item has been added to the configuration

Labscope for iOS / Android (O)

Recover

Item no.: 410135-0052-100

Labscope for iOS / Android (O)

Item Number: 410135-0052-100

Labscope for iOS / Android (O) Labscope for iOS / Android is a microscope software used to control, image acquisition, image processing and image analysis. Typical application fields of the software are general tasks and applications in microscopy or image acquisition, among others for education, routine and research. The software is not intended to directly or indirectly produce medical diagnostic results. Full list of functions and optional modules can be found here: https://www.zeiss.com/labscope

Packing and dust protection (2)

Cases for microscopes

Item has been added to the configuration

Case for transport and storage for Primostar 3 (D)

Recover

Item no.: 415501-1831-000

Case for transport and storage for Primostar 3 (D)

Item Number: 415501-1831-000

Case for transport and storage for Primostar 3 (D) - with trolley, 2 wheels, lateral handle and lockable, - dustproof, - outside dimensions of the case: 615 x 540 x 325 mm, - weight 6.25 kg

Item has been added to the configuration

Transport and storage box for Primostar 3

Recover

Item no.: 415501-1830-000

Transport and storage box for Primostar 3

Item Number: 415501-1830-000

Transport and storage box for Primostar 3, Primostar 1 and Primo Star Dimension: L 485mm x W 260mm x H 450mm

Primostar 3, full-K, tri, FOV22, 5pos, 40xPh2, ABBE turret, 75x50 Complete configuration with full-Köhler stand including - transmitted-light slide-in modules with 6V 30W halogen lamp and LED 3W white light, 5600K - 5-position nosepiece, cod., tilted backwards - mechanical rackless stage 75x50, drive right and specimen holder for two slides, with spring clip left - binocular phototube 25°/22 (50:50) - eyepieces 10x/22 Br.foc. with eyecups - objective iPlan-Achromat 40x Ph2 - ABBE condenser 0.9with turret disk BF, DF, Ph1, Ph2, Ph3 - pinhole diaphragm, d=30mm - light manager - ECO-Mode - color filter set blue, green, yellow - 6V 30W halogen lamp (spare part) - Country-specific power cable - dust cover - 5 years warranty